Statement of "SELECT UPDATES" of the audit

Similar Questions

• error handling - when using 'base' no updates to the audit table

  Hello;
  We use the error handling via the shadow errors; the operating mode is set by default to the "game";
  errors are caught in the trap in the errors table, but the audit of execution messages show is no longer there was error;
  y at - missing something on the shelf upward?
  before implementation of the error, with the operation mode table ' set to the line according to fail based on ' errors were recorded in all_rt_audit_exec_messages;
  now with the switch, the errors are caught in the trap, but we warned is no longer that it was a mistake;
  ID appreciate advise on how to fix that
  THX
  Rgds

  Hello

  Mode set-based, Oracle Warehouse Builder generates a single SQL statement that treats all data and performs all operations. Although the treatment of the data as a whole improves performance, audit information available are limited. Runtime auditing is only limited to the account of the run-time error. With mode based on the game, you can not identify lines that contain errors.

  Cap 10. Understand the Performance and Advanced ETL of Oracle® Warehouse Builder of modeling, ETL and data quality Guide data
  11g Release 2 (11.2)

  See you soon

• HP Pro 8610: disabling of updates of the firmware on HP printers

  How can I disable the updates of the automatic firmware on my HP printer.   HP updates its firmware once or twice each year in order to make after the ink market unusable.  It is the second time that it is happening now - and frankly, I'm kind of ticked at HP.  REALLY ticked.

  Hello

  Since the printer display panel, touch the HP ePrint icon, and then tap Settings and select update from the printer.

  Automatic update of touch and then press Off to turn off the automatic updates.

  Kind regards

  Shlomi

• Impressive transformation slow due to the updating of the user interface

  Hello

  I feel a huge slow down in my test as engine

  I update the display after each test. It consists of a rather

  "simple table" with a subtle change of color and bold

  to indicate the failure or success of the test:

  

  I have also tried several things to determine what routine was

  make the program almost crawling like a snail, here's my

  results:

  No UI refresh: 0m48s (same as Teststand with no updates of the user interface)

  The discount but no page table switch: 1m06s

  Bay of refreshment and switch page: 1m26s

  There are 314 tests, up to 314 redraw and possibly

  switch page 314 to reposition the view. Which gives the

  following user interface refresh costs:

  

  Update of the table: 18 years/314 = 57ms (replacing just a single line, Center to top)

  Switch to page: 20 s/314 = 64ms (bottom right corner)

  Is this really the case? Is there a way to make the refresh of the user interface

  faster? Create two separate loops/threads, one to make

  the test, one for updating the UI asynchronously?

  I understood for an overall picture about different

  widgets, but here I'm 'just' display of channels...

  David Koch

  Well, multi-listbox control is a problem if your change causes access to the muliple property node. For each property node LabVIEW normally does a refresh of the user interface which is very quickly. Fortunately, there is a fairly easy way to fix this.

  Use a node of property for the current VI (just drop a property node and change its class type VI Server-> VI reference) to get the reference of the Panel. Then use another property node connected to your reference of the Panel and select update from the Panel to postpone. Set this value to true before your Listbox (and any other updated user interface) and set the value to false then.

  

• What will be the best time for the update of the window?

  Does anyone have a directive on execution of the Update window?

  Someone has suggestions on when to do and how to do?

  Thanks in advance for your suggestions

  After you install installers, it will jump to the top message to reboot XP? or it will restart XP automatically?

  Thanks a lot everyone for all the suggestions

  Get WU to work for you, by choosing an option that works for you, for example you can be notified only and then you can choose to download and install, and reboot when it's convenient for you: -.

  Windows XP

  To activate the automatic updates yourself, follow these steps:

  1. Click Start, click run, type sysdm.cpl, and then press ENTER.
  2. Click the automatic updates tab, and then click to select one of the following options. We recommend that you select the automatic (recommended) automatically download updates that are recommended for my computer and install them .
     • Automatic (recommended) automatically download updates that are recommended for my computer and install them

       If you select this option, Windows recognizes when you are online and uses your Internet connection to find updates on the Windows Update Web site or on the Microsoft Update Web site that apply to your computer. Updates are automatically downloaded in the background, and you are not notified or interrupted during this process. An icon appears in the notification area of your taskbar when the updates are downloaded. You can point to the icon to display the status of the download. When the download is complete, you receive another message in the notification area so that you can review the updates are planned for installation.

       • Click to select the day and time for scheduled updates to download and install. You can schedule automatic updates for any time of the day. However, your computer must be on at the scheduled updates to install.
       • You can choose to install the updates as soon as they have finished downloading. To do this, click Download message (or the Update icon), and then click install. If you choose not to install updates when they finish downloading, Windows starts the installation on your set schedule.
     • Download updates for me, but let me choose when to install them

       If you select this option, Windows recognizes when you are online and uses your Internet connection to automatically download updates on the Windows Update Web site or the Microsoft Update Web site. An icon appears in the notification area of your taskbar when the updates are downloaded. You can point to the icon to display the status of the download. When the download is complete, you receive another message in the notification area so that you can review the updates are planned for installation.

       • When you want to install the downloaded update, click the message (or the Update icon), and then click install to install the update.
       • If you do not want to install a downloaded update, click Details, and then click to clear the check box next to that update to decline.
     • Notify me but don't automatically download or install

       If you select this option, Windows recognizes when you are online and uses your Internet connection to search for downloads from the Windows Update Web site or from the Microsoft Update Web site. An automatic updates icon and message appear in the notification area of your taskbar when new updates are available to download or install.

  • Click the icon or message to view the updates. If you do not want to download a selected update, click to disable the check box next to that update to decline. Click Start Download to download the selected updates. The automatic updates icon remains in the notification area of your taskbar, while updates are downloaded. You can point to the icon to display the status of the download.
  • When the download is complete, you receive another message in the notification area indicating that the updates are ready to install. Click the automatic updates icon or the message, and then click install to install the updates.
• Click OK.

• Update of the Adobe software updates not - disable DynamicLinkManager?

  When I go to AID in my Adobe software and select Update for the software update it starts updating large but, then stops because it wants to close DYNAMICELINKMANAGER.

  It's not open anywhere, but it will not continue updating until I close on my MacPro running Lion.

  When I turn this off?

  I actually turned it off in the ACTIVITY MONITOR

• A statement UPDATE changes the line if the update changes the column even value?

  HI -.

  I have a main classification and the corresponding audit table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211

  Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time. He is not able to determine that the value is the same.

  My goal is to load the audit table data if the value in a cell in the main table is really have changed.

  A statement UPDATE changes the line if the update changes the column even value?

  Best regards

  I have a main Table and the corresponding Audit Table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211

  Why?

  You try to resolve what made you what are the PROBLEM that select as the solution?

  Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time.

  Yes - it is EXACTLY what you say that you wanted to do and EXACTLY what the code does in this article.

  He is not able to determine that the value is the same.

  I think you mean that the code does NOT check if the value is the same. You can certainly change the code to do this check. But I have a question to start with your need for such a solution.

  My goal is to load the audit table data if the value in a cell in the main table is really have changed.

  OK - then modify the code to check EACH COLUMN and compare its NEW value to the OLD value and insert only the table of audit if SOME (or columns you care specifically) have changed.

  A statement UPDATE changes the line if the update changes the column even value?

  It depends on what you mean by 'change the line '. Of course to update a column with the SAME value does not change the resulting data value.

  But the physical structure of the line, the location of the pieces of line and information in the header block (YVERT, etc.) will change. And, as others have said Oracle doesn't know and doesn't care, so if the new value of a column is the same as the old value will create redo, undo and the rest.

  Start over and tell us what PROBLEM you're trying to solve. Then we can help you find the best way to solve it.

• How can I check the updates for Adobe Audition CS 5.5 version. I want to use the software after not using it for three years or more. I can't find any page that tells me whether or not the software updates are available.

  I want to check the updates of Adobe Audition software, purchased as part of the CS programs 5.5 package.

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• Select the audit Tables?

  Hello
  
  
  I think I know the answer to this one...
  
  Is there anyway to audit the DB users select a table?
  
  
  i.e.
  
  In the same way that a person can create a trigger on a table whose fires on insert, delete or update you can audit on choose?
  
  
  
  Thanks for your time,
  
  Robert.

  Select audit on tbl per session;

  SY.

• Problem with instructions to update within the if statement

  Hello
  
  I have the following PL/SQL script. It was written in a way so it can be run several times, without worrying about if she has previously run means that it should only perform the update and edit, if it has not already been done.
  
  DECLARE
  CNT NUMBER;
  
  BEGIN
  -Rename column
  COUNT (*) of SELECT INTO cnt FROM user_tab_columns WHERE TABLE_NAME = 'WELL_TEST_DATA_QUERIES' AND COLUMN_NAME = 'PRIMARY ';
  
  IF (cnt = 1)
  THEN
  UPDATE WELL_TEST_DATA_QUERIES
  THE PRIMARY VALUE = 0
  WHERE PRIMARY = 1;
  
  RUN IMMEDIATELY 'ALTER TABLE WELL_TEST_DATA_QUERIES RENAME COLUMN PRIMARY TO WELL_TEST_TYPE;
  
  
  END IF;
  END;
  
  However, when it is executed several times, it seems to execute the body of the if statement each time, despite the fact that the select statement must return a count of 0 (and I checked that this is the case).
  
  If I change the script and put the UPDATE statement in an EXECUTE IMMEDIATE, it works fine:
  
  DECLARE
  CNT NUMBER;
  
  BEGIN
  -Rename column
  COUNT (*) of SELECT INTO cnt FROM user_tab_columns WHERE TABLE_NAME = 'WELL_TEST_DATA_QUERIES' AND COLUMN_NAME = 'PRIMARY ';
  
  IF (cnt = 1)
  THEN
  IMMEDIATE EXECUTION
  ' UPDATE WELL_TEST_DATA_QUERIES
  THE PRIMARY VALUE = 0
  WHERE PRIMARY = 1';
  
  RUN IMMEDIATELY 'ALTER TABLE WELL_TEST_DATA_QUERIES RENAME COLUMN PRIMARY TO WELL_TEST_TYPE;
  
  
  END IF;
  END;
  
  Can someone give me an indication of what is happening here?
  
  Thank you
  Kathryn

  user10855910 wrote:
  Hello

  I have the following PL/SQL script. It was written in a way so it can be run several times, without worrying about if she has previously run means that it should only perform the update and edit, if it has not already been done.

  Are you referring to getting this:

  SQL> create table well_test_data_queries (primary number);
  
  Table created.
  
  SQL> insert into well_test_data_queries values (1);
  
  1 row created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  DECLARE
    2    cnt NUMBER;
    3  BEGIN
    4    -- Rename column
    5    SELECT COUNT(*) INTO cnt FROM user_tab_columns WHERE TABLE_NAME = 'WELL_TEST_DATA_QUERIES' AND COLUMN_NAME = 'PRIMARY';
    6    IF cnt = 1 THEN
    7      UPDATE WELL_TEST_DATA_QUERIES
    8      SET PRIMARY = 0
    9      WHERE PRIMARY = 1;
   10      EXECUTE IMMEDIATE 'ALTER TABLE WELL_TEST_DATA_QUERIES RENAME COLUMN PRIMARY TO WELL_TEST_TYPE';
   11    END IF;
   12* END;
  SQL> /
  
  PL/SQL procedure successfully completed.
  
  SQL> select * from well_test_data_queries;
  
  WELL_TEST_TYPE
  --------------
               0
  
  SQL> DECLARE
    2    cnt NUMBER;
    3  BEGIN
    4    -- Rename column
    5    SELECT COUNT(*) INTO cnt FROM user_tab_columns WHERE TABLE_NAME = 'WELL_TEST_DATA_QUERIES' AND COLUMN_NAME = 'PRIMARY';
    6    IF cnt = 1 THEN
    7      UPDATE WELL_TEST_DATA_QUERIES
    8      SET PRIMARY = 0
    9      WHERE PRIMARY = 1;
   10      EXECUTE IMMEDIATE 'ALTER TABLE WELL_TEST_DATA_QUERIES RENAME COLUMN PRIMARY TO WELL_TEST_TYPE';
   11    END IF;
   12  END;
   13  /
      WHERE PRIMARY = 1;
            *
  ERROR at line 9:
  ORA-06550: line 9, column 11:
  PL/SQL: ORA-00904: "PRIMARY": invalid identifier
  ORA-06550: line 7, column 5:
  PL/SQL: SQL Statement ignored
  
  SQL>
  

  The problem is not because the IF statement entered the swiped m the cnt = 1, but because, when the code is compiled the PRIMARY column does not exist. The code should compile properly against the database, and all verified database object references, until the code is actually running.

  As you have discovered, when you do the dynamic update to help to run immediately, you will not get this problem, because execute immediate statements are strings that can not be validated at compile time and so the code will compile ok and then run.

• How to block a select statement for a table of the specified until validation line

  Hello
  
  How to block a SELECT statement for a specified row in a table until willingness to engage occure?
  
  My procedure is part of a Stock request and if a user (X) get stock 1 piece, another user must wait for the user (Y) complete his reportoire.
  
  So, let say my stock have 10 pencils.
  
  When the X user starts the Stock_PLS procedure, in table Stock, line (e.g. R1) that user X should work with it, must be lock up to what the commit / rollback will appear.
  
  procedure Stock_PLS...
  
  Start
  ..
  pencils: pencils-1 =;
  ..
  End
  
  Observation-> pencils: = 9;
  
  
  This means that is a user there, run SELECT * stock of the table where rows_id = R1, SELECTION should wait the Stock_PLS started by user X will be completed (with commit or rollback) and his SELECT should return the value 9.
  
  What I need, is that Oracle has something like LINE EXCLUSIVE TABLE LOCK, but in my situation the SELECT statement should be denied on the specified lines, until the end of the procedure.
  
  Kind regards
  Michael

  Hello
  You can achieve this using the update with the Select clause.
  You can write your select statement like this
  SELECT * from stock of the table where rows_id = R1 for update;

• cannot select the disk to install the update of the Sierra (Macbook Pro 13 inch, late 2011)

  I downloaded the update of the Sierra and proceeded with the installation. However, I noticed that even if I could move the pointer autour, I couldn't make selections on tapping the trackpad. I managed to get past the first steps by using the 'tab' key (keyboard) to make selections and 'space' to make the confirmations. However, arriving at step 'select the disk where you want to install Mac OS', the 'Tab' and 'Space' technical has stopped working. Now I'm stuck here. Can someone tell me please how to go beyond this?

  Looks like it's a problem of trackpad? Or in any case a trackpad issue connected with installation of Sierra? I would take the MBP for a Genius Bar...

• When I click on the gear in modules to select Reset all the Add-ons to update manually, NO checkmark shows and firefox deletes icon Protection of Kaspersky

  I love the old version of Firefox, because I REFUSE to use my computer without Kaspersky. I have it? > Kaspersky is MORE important for me than Firefox (G.Chrome is my backup)

  Now I have KIS 2016 and I love its hexagonal icon, showing attempts it is blocking (it is set to block). Firefox 3 times now DELETED this icon, but shows that the Protection of Kaspersky is always an active add-in. I had to uninstall KIS 2016 3 times to return to this icon. When I click on the gear to select the background choice 'Reset all the Add-ons to update manually', nothing happens. No check mark shows, in Options / Advanced, I chose never "check updates". I'm tired of wasting my time to re - install KIS 2016 to get back on this icon. About: config I have enabled FALSE app.update.auto, app.update.enable and app.update.silent. What can be done in addition to the removal of Firefox? (I'm NOT going to install latest Firefox because it is incompatible with KIS).

  You are using a version of Firefox that is very old, please upgrade to the latest version of Firefox updated to the latest version. Kapersky drops support for older versions of Firefox, so if you do not update you may encounter problems in the strange, not to mention many security bugs in older versions of Firefox.

  Then, make sure that you use the latest version of Kapersky and then use controls, buttons and Toolbars Customize Firefox to add the icon of kapersky on toolbars of Firefox.

• Att/yahoo updated my email, which suggests to select Firefox as the browser, but how to get back the taskbar?

  Att/yahoo updated my email, which suggests to select Firefox as the browser, but how to get back the taskbar?

  Hi, you are missing the taskbar Windows, which usually appears at the bottom of the screen? Firefox normally does not block the taskbar if you do not use the mode full-screen. To check if you are using full-screen, you can use the F11 key that toggles between full screen and normal mode.

  Or if you meant the menu bar (File, Edit, View), you have two options:

  (1) display on request: press the ALT key to press F10 to display bar temporarily

  (2) time full display: you can use one of the following methods to view the list of the toolbar, and then select menu bar it:

  • Right click on a place empty on the tab bar (or the button '+')
  • Press the Alt key to activate the classic menu bar > view > toolbars
  • in customize mode > show/hide toolbars (see: Customize Firefox commands, buttons, and toolbars)

  Success?

• There is NO selection update software on my phone! How are Iphone 3 # IOS updated? It may not be this difficult OR the answer is "It cannot be upgraded" - which is?

  There is NO selection update software on my phone! How are Iphone 3 # IOS updated?

  It may not be this difficult OR the answer is "It cannot be upgraded" - which is?

  The model number you have listed is an iPhone 4, which can be upgraded to iOS 7.1.2. To have the option to update software on the phone, you need at least iOS 5, otherwise you will need to use iTunes on your computer sync to perform the upgrade.