Cluster of Windows 2008 on VMware ESXi 4 - ISCSI - (without VSphere)

Similar Questions

• Instalacion windows 2008 en vmware server 1

  Hola a todos:

  MUCHAS gracias por vuestras creative photos. Tengo con a servidor Linux Opensuse donde he instado el vmware server 1. Cuando quiero instalar el windows 2008 Server como virtualizado no me already, hace instalacion correctamente, pero al primer reinicio me hard to respond error Quebec el ha could change, y me da el fallo in el archivo winload.exe.

  Alguien ha ¿A esto mismo light? If so how should fixed lo? Deciros that sin embargo, el if windows 2003 me lo ha dejado instalar correctamente

  Saludos

  Hola,

  El vmware server 1 leads tiempo discontinuado.

  Version 2 is less than an ano para estarlo, adicionalmente goes a haber plots hasta entonces.

  The only version that supports windows 2008 Server are los vmware server, vmware server 2. Of todas maneras no esta soportada w2k8 R2 led.

  Yo you igual aconsejaria you planteases usar pasar / (a) las latest versions of vmware player, workstation o esxi. Actualizan y tienen buen soporte of hardware y software's (operating systems).

  Espero ayuda sido acercado

  Best wishes / Saludos.
  Pablo

  Please consider awarding

  all useful or correct answer. Thank you!! -

  Por favor considered premiar

  any respuesta correcta o util. ¡¡MUCHAS gracias!

  Virtually noob blog

• Backup Windows 2008 - VHD to ESXi

  from the backup of windows 2008 I created a VHD file, how can I import it in Vmware ESXi 3.5?

  I tried to convert the machine with the converter to warm, but 95% still does not go.

  The converter does not support the VHD file.

  Thank you too much.

  http://www.WinImage.com/

  Convert with this program.  Open disk image (.vhd) and use it to convert (hard).  Then use WinSCP to transfer the files to the ESXi data store, create a NEW virtual machine and point to this vmdk file.

• Installation of Windows 2008 R2 on ESXi 5.0

  Hi all

  I worked with ESXi 4 & 5 running Windows 2003 OS invited without problems.  Just tried to install Windows 2008 R2 x 64 and face an interesting difference.  When installing windows 2003 I have to specify the details of the Virtual Machine, specifically the amount of disk space I want to be available to host everything.  Then start the virtual machine, newly created from the windows installation disk appropriate.  I then get prompt with the "blue" screen allowing me to partition the space according to the BONE and once installation is complete I can then go through the operating system and partition and format the remaining space, as I hear it.  Doing so to a Windows 2008 R2 x 64 installation disk and I don't you this possibility so the BONE ends by using all the space allocated to the host of comments.

  I guess I'm missing something blindingly obvious, but have not been able to track down any relevant information to this day.

  Yes, you really lack the partitioning part.

  This is after selecting custom selection (advanced option) > select the drive you want to install windows > click drive options and partition your drive.

  Best regards, Harold

• Setup error 11g RAC on windows 2008r2 on VMWare ESXi 5

  I am a beginner and install oracle 11g r2 rac for the first time. I'm stuck in the fixing, I use windows 2008r2 on VMWare.
  We have attached 500 GB drive of NetApp storage for these hosts.
  no newspaper is generated at home to see the errors of milling
  
  in rootcrs_rie_oradbn1_vm.log. I see an error
  
  -19 March 2012 18:17:45 GMT + 04:00 [the customer problem Description]
  Description of the problem: Configuration of the Infrastructure Grid [INS 20802] failed.2012 - 03-19 16:45:29: creation or upgrading of Local Oracle (OLR) registry
  2012-03-19 16:46:45: return code of command of 255 (65280) command: E:\app\11.2.0\grid\bin\ocrconfig-local - update arg\sapadmin
  2012-03-19 16:46:45: E:\app\11.2.0\grid\bin\ocrconfig-local - upgrade failed with the error: 255
  2012-03-19 16:46:45: cannot create or upgrade OLR
  
  I'm following the intallation of oracle rac document.
  
  Kindly help
  
  Thank you
  Rajesh.

  923293 wrote:
  Thank you for the support, I installed Oralce 11 g RAC wind2008 r2 virtual machine environment successfully, I downloaded 11.2.0.3

  1. problems solved after execution of runcluvfy

  Thank you very much
  Rajesh.

  Please let us know.
  Please mark our suggestion as being correct or useful if you think that they were closing the debate.
  https://forums.Oracle.com/forums/Ann.jspa?annID=718

• How check/change in windows 2008 R2 vmware tools

  Hey guys,.

  I go through the documentation about our backup software, and it says to check and ensure THAT VSS is installed/activated in the installation of vmware tools, but when I go to add/remove programs and to seek to 'Edit' the installation I don't have this option. My only option is to uninstall vmware tools.

  Is VSS automatically installed/activated now in vmware tools? We run vsphere 4.0.

  Thank you

  Kevin

  I could be wrong, but I think that the driver VSS is enabled by default.  To verify, right-click on the VMguestInstall/Upgrade tools. When mount tools, you have an option to change, look under the drivers section

• How to extend the C:\ On Windows 2008 R2 (64 bit) OS disc without interruption of service!

  Hello

  He was for some time because I used the VMTN forum, I am in need to find the best solution to extend the drive of Windows 2008 R2 (64-bit) C:\OS and requires no interruption of service.  I use a lot of options before but seems to be some limitations for requires downtime or 32 bit instead of 64-bit anyone no matter what evidence would be greatly appreciated.

  Options:

  1. use the 2nd virtual machine as aid

  2. use the vmkfstools command line

  3. use the Dell ExtPart tool it of live and uninterrupted, but does not support x 64 bit works very well with 32-bit

  4. use 3rd tools like Partition Magic or other tools (anything I can try using the free trial version would be cool)?

  Ideas or something would be great?

  Azn2kew

  Hello

  I am convinced that W2K8 server and suport extend the volume without tools 3rd part and without service interruption.

  See for example here: How to extend a Partition on drive in Windows Vista and Server 2008

• Limit max vCPU Windows 2008 R2 STD

  What is the limit max vCPU on windows 2008 R2 STD, ENT, ENT more in vSphere 5.5.

  In VM, I increased virtual 8 shells and carrots at 1 end OS I see only 4 processors.

  Not to be confused with the «...» " with Hyper-V enabled'added to the mentioned Server versions. What is important is the number of sockets supported for Windows itself. This is regardless of whether or not the Hyper-V role is enabled.

  André

• The Vcops error (VMware-vcops - 5.8.0.0 - 1448123 - vapp.ova) on VMware ESXi (VMware-VMvisor-Installer - 5.5.0 - 1331820.x86_64.iso)

  Hi all

  I am a novice in this area and to learn.

  I installed VMware ESXi 5.5 in one of my machine and it works through VMware player. Am also able to connect to VMware ESXi 5.5 via Vsphere Client 5.5 on my machine. Through my research on the internet I found that vCenter Server is required only when we have the large number of ESXi to manage (correct me if I'm wrong). In my case, I have only one. Therefore, I have not installed vCenter Server.

  Now, I want to deploy vCops with VMware ESXi 5.5 5.8. But while deploying OVF template(VMware-vcops-5.8.0.0-1448123-vapp.ova), I get the following error.

  

  My understanding above is correct or am I missing something obvious?

  Hi RizQad,

  According to the guidelines of the screenshot, you connect directly to the host ESXi 192.168.0.49 and the error is reported through the OVF vCOPs. It's expected, because the ESXi host do not understand the purpose of vAPP, as explained in my initial comment.

  You need to connect to your IP vCVA i.e. 192.168.0.51 using the vSphere client and then import the OVF vCOPs.

  Let me know if you still experience this issue.

  Arun-

  https://Twitter.com/arunpande

  http://highoncloud.blogspot.in/

  Virtualization VMware on NetApp

• Is VMWare ESXi 5.5 free?

  
  I installed VMWare ESXi 5.5 and vSphere cleint test lab and what I see is a 60 day trial, how can I get a free version?

  As mentioned André you missed the stand-alone host licenses section.

  If you are too confusing, here are the steps

  To allow a standalone ESXi 5.x (vSphere Hypervisor):

  1. Connect to the ESXi host with vSphere Client.
  2. Click the Configuration tab.
  3. Click licensed features in software.
  4. Click change in the appearance under the license tab.
  5. Select assign a new license key at this host.
  6. Press enter and enter the license key.
  7. Click OK.

• Cannot import Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4.

  Hi team,

  I use VMware vCenter Converter Standalone to import certain Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4, using another Windows Server 2008 R2 as the machine Agent Converter. Well, the agent connects to the Windows VM source very well (I used the net use command to create a line of conduct...), perhaps no chance to connect to the computer target VMware ESxi 4 and make the converter doesn't work...

  Following is the error message:

  "Unable to connect to the host specified" from the converter agent machine. " It is perhaps because the host is not available on the network, there is a problem with the network configuration or management on this host services do not react. Check all components of converter to be able to connect.

  So, my question is; is it possible to create a work around (like the net use Windows command above) to make possible the connection of the converter Agent on Linux VMware ESXi 4 machine Windows machine, to directly import the virtual machines of Windows Hyper-V to Linux VMware?

  Thanks in advance,

  It's even easier than that

  Use this: http://www.winimage.com/

  Which will convert *.vhd *.vmdk, so you don't need to do all this... Of course, another way is to start the machines, leaving them on Hyper-V and go through the network and process virtual machine as physical machines and do a P2V on the network...

• ESXi 5 and Windows 2008 R2

  I created a new virtual machine for Windows 2008 R2 and he gave all the requirements, that he needs.  I put the original in the drive and powered installation on the image DVD.  I can't rip ISO and transfer it to my VMware because it does not

  How can I make the appearance of the virtual machine or boot WIN 2008 DVD in the drive?

  As part of the virtual machine-> 1 CD/DVD drive. Selected settings are

  The DEVICE status greyed

  DEVICE TYPE device = customer

  MODE = PASSTHROUGH

  VIRTUAL DEVICE NODE = IDE(1:0) CD/DVD drive 1

  Appreciate your help.  Thank you

  Hello

  1 - if you put the DVD in the ESXi host - then

  

  Then make sure that the first initialization of vm bios device is cd rom

  2 - If you log into the esx from your pc/laptop and that you have mounted the DVD in your laptop / pc, see below

  

  You can point to a pc/lap dvd player you or you can use the ISO image in pc Tower

• VMware esxi 4.1 compatibility with ASUS PIKE 2008 interface?

  Hello VM ware Folks,.

  Can you let me know if ASUS PIKE 2008 interface card is compatible with vmware esxi 4.1 since I intend to install vmware server.

  Appreciate your help.

  Thank you

  Srikanth.

  Hi Srikanth,

  PIKE is an exclusive feature of expansion for ASUS motherboards. These motherboards are found in the HCL, but it seems that ASUS has not put the PIKE in the process of certification as a discreet storage card. ASUS claims nor that it is supported on anything other than Windows and Linux operating systems.

  You just have to try it and see, really. I think he's probably going to work perfectly, but it probably is not an adapter of storage supported for VMware ESX or ESXi, if you are having problems.

• Creating a failover cluster Windows 2008 on ESX 3.5

  Hello

  I would like to create a cluster Windows 2008 on ESX 3.5.  As I understand it browse the forums supporting parallel SCSI as a type of shared bus was abandoned for Failover Clustering in Windows Server 2008.  To enable clustering, you need to use iSCSI on a target server.  Additional costs of license option for the introduction of a target server.

  Is ESX 3.5 update to support Windows 2008 failover clustering?  If so, when?

  Is there another solution that involves no additional cost?  I watched StarWind but the free version does not give us enough resources that is necessary.

  How ESX 4.0 supports Windows 2008 failover cluster?

  Thank you

  Brian

  In ESX 3.5, you can do a 2008 failover cluster with a software initiator in the node Windows 2008.

  For ESX 4 no problem.

  See also: cluster in a VMware environment software

  André

• update fails with the ccr 800b0100 windows 2008 cluster

  Hello world!!! I hope you stay warm...

  I have a windows 2008 sp1 64-bit server that is running Exchange 2007 sp1 on a passive node of a CCR cluster... There are 2 groups in our org, all other servers update very well... windows firewall is disabled...

  I had one "update failed 800 b 0100" run windows update to KB969947 (which is successfully installed on all machines)...

  followed by all scenarios http://support.microsoft.com/kb/947366 ... even uninstalled my Symantec Mail Security 6 on this node... always the update fails...

  Let me know if you need more information...

  Here is the output of the system update tool...

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2010-01-14 08:07

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB969947_server_0~31bf3856ad364e35~amd64~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB969947_server~31bf3856ad364e35~amd64~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB969947~31bf3856ad364e35~amd64~~6.0.1.0.mum

  Control components store

  Summary:
  Seconds executed: 391
  Found 3 errors
  CBS MUM lack count: 3

  Unavailable repair files:
  servicing\packages\Package_for_KB969947_server_0~31bf3856ad364e35~AMD64~~6.0.1.0.mum
  servicing\packages\Package_for_KB969947_server~31bf3856ad364e35~AMD64~~6.0.1.0.mum
  servicing\packages\Package_for_KB969947~31bf3856ad364e35~AMD64~~6.0.1.0.mum
  servicing\packages\Package_for_KB969947_server_0~31bf3856ad364e35~AMD64~~6.0.1.0.cat
  servicing\packages\Package_for_KB969947_server~31bf3856ad364e35~AMD64~~6.0.1.0.cat
  servicing\packages\Package_for_KB969947~31bf3856ad364e35~AMD64~~6.0.1.0.cat

  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  FOR INFO:

  
  Frequently asked questions about the vulnerability of the Win32k - CVE-2009-2513 insufficient data Validation

  What systems are primarily exposed to this vulnerability?

  Workstations and servers terminal Server is mainly threatened. Servers could be at risk if administrators allow users to connect to servers and to run programs. However, best practices discourage you to allow this.
  
  Source: http://www.microsoft.com/technet/security/bulletin/MS09-065.mspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft