ESXi 5 and Windows 2008 R2

Similar Questions

• See connection to the Server 5 and Windows 2008 R2

  Hello

  I try to install view connection Server 5 under Windows 2008 R2, which takes place under VM on an ESXi 5 server.

  But I still got the error message that my operating system is not supported.

  I have read the system requirements and Windows 2008 R2 with SP1 is listed.

  Is there something I forgot?

  You cannot install the view on a server that is running as a domain controller active directory.

• How to upgrade to Windows 7 and Windows 2008 SMB to SMB3.0?

  Has any chance of upgrading to Windows 7 and Windows 2008 SMB to SMB3.0?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• 64-bit Intel processors and Windows 2008, Datacenter Edition - Download naming confusion. That what I want?

  I have processors intel xeon mp in my server. Here are the processors intel 64-bit. When I go to download Windows 2008, Datacenter Edition (http://www.microsoft.com/downloads/en/details.aspx?FamilyId=E8A5AEC0-DE34-405E-9304-1C378F44077C&displaylang=en) I get 2 options. 1 "amd64fre" in the name, the other has "x86fre" in the name. At the bottom of the page it says I want amd64 for 64-bit and x 86 for 32-bit processing. I'm not sure of is this:

  The amd64 DVD only does support AMD 64 opteron chips, or it will make the xeon mp as well? The "REF" does mean "French", even if later in the name, it is clearly IN (English).

  I have processors intel xeon mp in my server. Here are the processors intel 64-bit. When I go to download Windows 2008, Datacenter Edition (http://www.microsoft.com/downloads/en/details.aspx?FamilyId=E8A5AEC0-DE34-405E-9304-1C378F44077C&displaylang=en) I get 2 options. 1 "amd64fre" in the name, the other has "x86fre" in the name. At the bottom of the page it says I want amd64 for 64-bit and x 86 for 32-bit processing. I'm not sure of is this:

  The amd64 DVD only does support AMD 64 opteron chips, or it will make the xeon mp as well? The "REF" does mean "French", even if later in the name, it is clearly IN (English).

  Hé BSAFH

  Here is the vista forums

  Try the help below links

  http://www.Microsoft.com/windowsserver2008/en/us/2008-DC.aspx

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  Walter, the time zone traveller

• Connectivity problem between Windows 7 and Windows 2008 Server R2

  I'm unable to ping Server Windows 2008 R2 on windows 7. some time get the replay, but some time is expired. I can ping the XP system and windows 2003 and router and switch. knowledge on all new patches or something is blocking the connection.

  I turned off firewall and Antivirus in both systems, off IPV6 in the two systems, but it's no go.

  Hello

  That your computer is under domain, you must contact the TechNet forum, where we have of the support technicians who are well equipped with the knowledge on the issues of domain, do visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• UM 1.2 and Windows 2008 - Server

  Hello

  It is possible to run UM with Windows 2008 Server? It is: he runns always CWLMS 3.2 and the customer wantes to add UM. The material is not the problem.

  Yes, UM 1.2 comes with 3.2 LMS that can be installed on a Windows 2008 Server.  You don't need to install all of the LMS 3.2 to get the BUZZ.  You can simply install common Services 3.3, Deputy of CiscoWorks, CiscoWorks portal, then UM.

• ACS Se 4.2.1.15 patch 4 and Windows 2008 R2

  Hi, can someone tell if ACS Se and Agent remote 4.2.1.15.4 supports Windows 2008 R2 please. Thank you.

  Please mark this thread as answered so that others can benefit from the same.

  Kind regards

  Anisha

  -Note the useful messages.

• Application pools and CF9 64-bit and Windows 2008 R2 64-bit

  Hi all.

  Since about 3 months ago, I got CF9 64-bit running successfully on a Windows 2008 R2 64-bit, and 64-bit PHP server.

  It was a few days get it all working happily together, but it's an entirely different discussion, I'm happy to help if someone at - it need help.

  My question is for someone with some experience and understanding of the relationship between IIS 7, Cold Fusion and Application Pools.

  We have 8 GB of RAM on a 3.2 GHz dual processor box.  And on this particular server, we have about 350 sites of cold fusion.  All sites of very low traffic, I should add.  Like maybe on average 1000 page clicks each day.  In any case these sites ran flawlessly on 2 GB of RAM box with two 1 GHz processors.  And honestly, it ran more surely than it does now.

  What role the Application Pools in an environment dedicated to Cold Fusion?

  Because only one instance of JRun is already launched, SEE crashes when requests overwhelms the box and it blocks.  So, kind of defeated the purpose of the independent application in my opinion Pools.

  During my installation and transfer of these sites, I gave them each their own independent Application Pool, which are now individual instances of IIS worker process, each using about 10 MB of RAM.  Thus, for example, if the interaction that happens with 200 websites that they eat up to 2 GB of RAM, which, although not large, is very well now.  The problem is that I intend to leave this machine reach 500 sites before adding another box, but I worry about the performance.

  FUNDAMENTAL QUESTIONS:

  Should cold fusion Pools of independent applications for each web site or all websites can be used under DefaultAppPool?

  And what are the advantages and disadvantages of the two options?

  Is there a setting I should change who will say active stop w3wp.exe instances if no activity takes place for a certain period of time to release the memory.

  Thanks for any input.

  Rush, the bottom line questions:

  Should cold fusion Pools of independent for each web site applications or can

  all of these Web sites running under DefaultAppPool?

  No, it's not 'need '. They can all run in a pool. It is probably best to split them somehow, so that is something is not bad in a single application pool, at least those of the other application pool still works.

  And what are the advantages and disadvantages of the two options?

  As you note, each application pool uses a little memory. Not much, but as you note, 200 + it adds up. FWIW, the application pool is also part of the connection between IIS and CF, and there are times where just a recycling application pool (rather than restart CF) can solve a problem.

  That said, there certainly are times where CF will be what does not, and it won't matter to the application pools how you have. That's really what you want to focus on: why (if ever) SEE becomes is not responding.

  Is there a setting I should change who will say active

  instances of w3wp.exe to stop if no activity takes place for a certain

  time to release the memory.

  It is the default behavior of the application pools. See the "Advanced settings" for each pool in IIS 7 (or for her properties in IIS 6) for the recycling of various parameters of health protection.

  To return to your root cause problem (CF becomes unresponsive), anyway, you say "these sites were without fault on 2 GB of RAM box with two 1 GHz processors.  And honestly he ran more surely than it does now. "So what was 'before '? Not just less memory, I guess. He was also 32-bit instead? Was that an earlier version of the CF? It is useful for you to be more specific.

  Again, everything that is wrong is an explanation. It looks like you use the CF Server (not multiserver) mode, until you find in the coldfusion9\runtime\logs (not the coldfusion9\logs)? There may be important information before your plant that explains what is happening.

  As for your struggles get CF running on IIS 7, I'm curious: was it the 9.0? If Yes, what 9.0.1 (the free updater, which must be installed today on a download of CF9) which supported for IIS 7. Previously, it was indeed a little manual to make work work. And in fact, it may be that an update to version 9.0.1 could help resolve some problems if your manual configuration efforts could have hurt at all.

  Hope some of it is useful.

  /Charlie arehart

  [email protected]

  Quick delivery, help desk services remotely, the demand for CF (and CFBuilder)

  More on http://www.carehart.org/consulting

• Hiberfil.sys and Windows 2008

  Hello

  Does anyone know if the hiberfil.sys file is required on a virtual Windows 2008 Server for any specific 'VM' related features?  For example it is necessary to do a Vmotion or create a snapshot?

  I found that if I "powercfg off h" I can remove this my template file, but I don't want to break some functionality but do.

  Thank you

  SB

  Hello.

  Does anyone know if the hiberfil.sys file is required on a virtual Windows 2008 Server for any specific 'VM' related features?  For example it is necessary to do a Vmotion or create a snapshot?

  No, not at all on the side of VMware.  You would only need to this feature, if you wanted to put into hibernation using native functions to its guest OS.

  I found that if I "powercfg off h" I can remove this my template file, but I don't want to break some functionality but do.

  I do this procedure for all models of Windows 2008 I.

  Good luck!

• Cloning of ESXi, models and Windows SID

  Hi again,

  I read a lot of posts, blogs and the slightly contradictory articles regarding the use of models in ESXi and cloning. Some examples of those who are...

  http://drewsrambling.blogspot.com/2008/10/ESXi-copy-VM-poor-mans-template.html

  http://communities.VMware.com/message/1128111#1128111

  .. and in all this, the only thing that no one seems to talk (as his treatise by a VC in ESX) are Windows SID.

  Take the 2nd link for example, I have reproduced the process of using the browser of data store for each (as mentioned in the 2nd link) copy the new VM VMDK file with no discs and works in principle, as long as the virtual machine starts without a problem, or to remove the inventory, or make a complete copy of the file of the virtual machine , you clone lives in, in the DS browser and add it back in stock again (sorry, almost sentence makes no sense but I hope you get my meaning).

  However, in the back of my mind and the reason why I don't want to go much more even without checking permanently with 'experts' is that I have no idea and that he can't seem to find any mention of what happens on SID wise in these "poorman cloning" alternative ESXi...

  I read so much today, my poor brain hurts wee I was wondering if someone could help to shed light on that.

  I want to only create a few templates to save me having to wait an hour for different flavors of Windows Installer. Nothing complicated, I don't need all the features of SysPrep, I do not need auto connect to domain existing etc... simply a windows fully updated the base image that I can take occasional copies of for test purposes.

  Is it possible for the simple "user" who experimented with ESXi? Or I have to sell my mother and sister to pay for the VC to clone and obtain images with unique sid?

  For standard cloning w/o vCenter take a look at this script I wrote: http://communities.vmware.com/docs/DOC-9321 (you can find other scripts/resources on our site, in the signature down below)

  Here is a description quick of what are the related Clones: http://www.sysdigg.com/linked-clones-in-vmware-view-3 (this is a feature of VMware View 3)

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  http://Twitter.com/lamw

• SBS 2011 and Windows 2008 file share

  I have a sbs 2011 and a regular Server 2008 domain. I need to set up a file share that can see both areas. I discovered what a normal two-way transitive trust between them is a bad idea. Wanting to know if there is a better way to do it by side just setting up user accounts in the regular field of 2008 (where the share resides) which corresponds to the account of sbs domain, setting up the collective right to the share, and map the drive to the sbs domain workstations. I don't like this method because changing a password on the sbs domain would require a manual modification to synchronize on the regular field.

  Hi Mialbert,

   

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet (Small Business Server) Forum

  http://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

   

  Hope this information helps.

• IOS and Windows 2008 NAP (IAS)

  I try to configure AAA (RADIUS) on my routers and switches (1841, 2821, 3825 / 3560 G). I'd love to have in the security groups AD (Admins - priviledge 15, RouterView - privilege 1 router) and also to authenticate VPN (using a VPNUsers AD security group). I also need a 3rd group, WiFiAccess to allow wireless groups.

  Can anyone tell me a good documentation for it? I can get one or the other work. The problem seems to be political IAS, as seems to hit the 1st policy and allow or deny depending on which policy I 1. Advice, examples, help?

  Thank you!

  Hello

  Please see the attached doc that explains on the privileges of the IAS.

  Kind regards

  ~ JG

  Note the useful messages

• OfficeJet 6700 and Windows 2008 R2

  Is there a driver for this OS?

  Yes

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5058338&cc=us&DLC=en&LC=en&product=5058338&tmp_track_link=ot_search

• Windows 2008 R2 NIC disconnected when converting from a model and started using workflow start-vm in VCO

  Hello

  Have a very strange problem. I wanted to apply patches using a VCO on my model R2 2012 Windows workflow and Windows 2008 R2 models. My model of Windows 2008 R2 when converted and started by the workflow VCO does NOT get an ip address. Yet, when I manually turn on the model of Windows 2008 R2 after be converted manually, it gets an ip address immediately. So weird.  There is no problem with 2012 Windows, it works very well. NOTE: The workflow that starts the virtual machine only turns on (and is built in the workflow built by vmware) Finally, today I built a new model and has the same problem. NIC is VMXNET3 and problem seems of course specific OS, has anyone seen this before?

  Thank you

  I found this article and fix it. It resembles a known issue with VSphere 5.1

  VMware KB: Registration or the deployment of a VM template fails

• Support for Windows 2008 R2 in vCenter Server 2.5 U4 and 4.0

  I'll have no problem creating models in both versions of vCenter Server. The question arises when you try to deploy the model to the Customization Wizard help. Under 4.0, it immediately comes up as not supported (7 64 windows server). Minus 2.5 U4, there is no tag for Windows 2008 R2 OS.

  Support for this OS will be released in a next update on both vCenter servers (specifically the Customization Wizard)?

  Windows 7 and Windows 2008 R2 is not supported with vSphere yet but experimental and should be supported subsequently released but they're working on it. You can run the wizard of customization with Windows 2008 however, here's how the instructions http://vinf.net/2009/07/09/how-to-deploy-a-windows-2008-server-from-a-template-with-vsphere/

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant