Code 39 corrupt driver HID compatible mouse

Similar Questions

• Driver satellite L50-B-1NX - HID - Compliant Mouse error

  Hello

  For these last months, I was unable to solve this problem!

  There are 3 different HID - Compliant mouse driver on my computer, but only one has the yellow triangle with an exclamation mark inside. I updated it, but this has not solved the problem.

  When I go to properties, it says "this device cannot start. (Code 10) ".

  It has 5 different hardware ID:
  HID\SMARTVHidMiniDevice & Col02
  HID\VID_0B8C & UP: 0001_U:0002
  HID_DEVICE_SYSTEM_MOUSE
  HID_DEVICE_UP:0001_U:0002
  HID_DEVICE

  When I go to State I get these:
  ~ 01802400
  DN_HAS_PROBLEM
  DN_DISABLEABLE
  DN_NT_ENUMERATOR
  DN_NT_DRIVER

  I can't find the driver to re - install this, I entered a serial number on the finder driver and still nothing!
  Can someone please?

  Can you please tell us which laptop model you have and what operating system are you using?

• Compatible mouse HID installed incorrectly as an USB host controller

  I'm having a problem with Win7-64 install my mouse (HID-compliant generic) as a USB host controller and then turns off because it does not properly (surprise!). There is no support for my mouse Web site because it is a specialty vertical ergonomic mouse (zero Tension mouse is the name of it). There is no disk to install the software to. I tried to look generic HID-compliant mouse drivers to see if there a software installation package, but not luck. Everything points to a black hole, called Logitech.

  Under Win7-32, the device installs and runs correctly as a generic HID-compliant mouse, but when I move to my Win 7 64 box, it doesn't work.

  I tried to go through and uninstall the driver and reinstall using the generic drivers in the driver sys32 directory, but it won't let me do that. Win7-64 insists that the device is a USB controller, when it clearly isn't. I also tried to use the legacy device installation procedure, but no luck as Windows gives me any options even at a distance that may be regarded as 'mouse '. Maybe, I'll dive into the registry and try to coax Win7-64 in the light like a mouse. * sigh * I know... do not go, I could really spoil things! I promise you that I'll just search.

  Hi Catroast,

  My apologies for asking redundant questions.

  The operating system uses the information stored in the firmware on the mouse to identify itself.

  This process can be damaged by an anti-virus that is confounding the install as an attack and prevent the correct information transfer.

  You can try to install the mouse with the anti-virus temporarily disabled to see if it affects the issue:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Change the ranking or the type of device a piece of hardware is identified as it is a matter of updating the driver.

  Of course, the necessary driver is selected according to the firmware of the mouse.

  I think the issue here is the 64 bit version of Windows.

  It is possible that the chipset drivers which are installed may need to be updated.

  They are the other component of the hardware identification system.

  The chipset drivers are for on-board devices from the motherboard (USB, PCI, sound card) if embedded and can sometimes be outdated or corrupt.

  This can cause the material to be misidentified as well. I recommend that you check the site of PC manufacturers to see if the drivers have an available update.

  One last suggest would be to see if a BIOS firmware is also available from the manufacturer of the PC.

  It helps in the process of installing equipment, working in tandem with the chipset drivers and BIOS settings.

  I see that the site recommends Windows 98 to XP for operating system compatibility.

  It is possible that they have not updated the device drivers for the 64-bit platform.

  Honestly, I'm surprised, he worked on the Win7 32 bit PC, but it uses the generic driver in this case.

  A 64-bit driver is probably much more specific to the device, and therefore a generic driver will not be not available.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• page scrolls down when I connect a HID-Compliant mouse

  When I plug in my compatible mouse (Logitech) HID the page scrolled down and can't move up again after a first click, sometimes I hear a loud hum that stops when I say - connect the device. the pointer works very well and where I position, I can just scroll with it. I have tried to disable the s synaptic touchpad and still have the same question. I am running windows vista 32 bit home edition on a laptop HP Compaq. This mouse was previously working and all of a sudden this question arises. everything has been updated I can find.

  Hello

  I suggest that you uninstall the software of the computer mouse and then reinstall and check if that helps.

  To uninstall an audit of the program:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Please post back with the results so that we can help you better.

• Do I need to uninstall it before installing a ps/2 compatible mouse

  Hello

  should I uninstall ps/2 compatible mouse? prior to installation you recommended

  First a little advice.  If something is not broken, do not fix it.  You say something tells you that your mouse driver was obsolete, but it was the work of the mouse?  If it was, it was a mistake to fool with the driver.

  In regards to your PS/2 mouse, is what brand?  The Synaptics driver sounds to me that it would be for your touchpad, not your mouse.  Your touchpad works?  Worst case, you can buy a USB mouse and use it.  You can buy these for as little as $4.

  If you need to come back before you begin the update of drivers, you should study the system restore back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. 1.5 TB external hard drives is approximately $90 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• hide the mouse

  How can I hide the mouse?

  I've separated the .fla file code and try to change the cursor to existing windows in my cursor whitch I created in clip

  but the code

  Mouse.hide();

  no help

  Code:

  package 
  {
       import flash.display.*;
       import flash.events.*;
       import flash.display.MovieClip;
       import fl.controls.RadioButtonGroup;
       
       import fl.transitions.Tween;
       import fl.transitions.easing.*;     
       
       public class CoinToss extends MovieClip 
       {
            var radioGroup1:RadioButtonGroup=new RadioButtonGroup("Coin Loss");
            
            var randomNumber:Number;
            var points:Number = 500;
            
            //constructor
            public function CoinToss()
            {
                 //Mouse.hide();
                 addEventListener(Event.ENTER_FRAME, myCursor);
                 my_cursor.mouseEnabled = false;
                 
                 gameMenu();
            }
  

  You need import flash.ui.Mouse so that masquer() to work.

• iCloud drive hides too much data locally?

  iCloud drive hides too much data locally?

  I just started using icloud drive to store very large files, but now my local storage on my MBA has dropped way to several concerts less than a gigabyte. Icloud tent hiding too well locally? I can't find a setting for this.

  JimJon wrote:

  iCloud drive hides too much data locally?

  I just started using icloud drive to store very large files, but now my local storage on my MBA has dropped way to several concerts less than a gigabyte. Icloud tent hiding too well locally? I can't find a setting for this.

  iCloud drive holds shadow copies of all the files on your Mac so you can always access your documents, even in offline mode. It is supposed to keep your documents synced to your devices, not as only an off-site storage to save space on the mac.

  You can't stop the shadow - on iCloud drive all files will be downloaded to your Mac, if you enable iCloud drive.

  If you want to iCloud drive as an external storage without the shadow, don't turn on your Mac, but only use the web interface at www.iCloud.com to download and view the documents there. But then you will not be able to see iCloud drive as a drive in the Finder.

• Driver Wireless Laser Mouse (PA3706E-1ET1) problem software on Windows XP

  I have a Toshiba Wireless Laser Mouse PA3706E-1ET1 that gives a serious problem with the MouseDriver.EXE software provided on the CD with the mouse.

  * First release _ * _: when you install the driver on the CD I get an error message saying that they are not certified by Microsoft. The documentation that came with the mouse has an additive brochure that says about it and ignore that the software works without any problem.

  * _The issue_ *: with the mouse driver, I get a mouse icon in the windows taskbar and clicking on it will allow me to set up all the extra buttons running. Everything works very well at this point. The problem occurs when I try to shut down Windows (this is Windows XP) it will fail to finish. It seems to me close a few icons in the status bar, but then it stops. I can click on stop again and it still will not close. If I click with the right button on the mouse icon of toshiba in the windows taskbar and click EXIT in the drop-down menu, then shut down Windows and then stops. It seems that the mouse driver is to avoid a stop down. This is what is displayed in the event viewer:

  Event type: WARNING
  Event source: USER32
  Event category: no
  Event ID: 1073
  Date: 02/07/2009
  Time: 10:53:03
  User: NT AUTHORITY\SYSTEM
  Computer: PC
  Description:
  The attempt to shut down the PC

  For more information, see Help and Support Center in [http://go.microsoft.com/fwlink/events.asp].
  Data:
  0000: 00 00 00 00...

  * _Third issue_ *: it is serious, I have Microsoft Virtual PC. When I launch and run any VPC I get a blue screen of death. The error is DRIVER_IRQL_NOT_LESS_OR_EQUAL and the offending component is SysMouseFilterF3.sys.

  If I uninstall the mouse driver that disappear from all of the above questions. The mouse works but not all buttons. Scrolling the mouse left + right, vertical and the back and buttons before work, but the parchment of horizontal tilt and two additional buttons do not work.

  I can't find any mention to my model mouse on Toshiba or the Internet in general. Is there an updated driver for this mouse or in any way I can solve problems above without losing the functionality of the extra buttons?

  -Andy

  Re: Toshiba Wireless Laser Mouse PA3706E-1ET1 (which is appears as 'Sysgration USB mouse' in hardware)

  Yes, Andy, I have the same problems with this mouse. No driver updated (or even original) with a view to anywhere.

  Called Toshiba - all they could suggest "just use the drivers on the CD" and unable to offer any other suggestions!
  No drivers on PC World UK (seller) or Sysgration site or the other.

  Author of the driver (info email the driver DLL) contacted but no response until now.
  SysMouseFilterF3.sys does not seem to be the culprit because it causes a blue screen of death on the startup of the system.
  In order to get the mouse to work I just uninstalled Sysgration drivers and delete the mouse in the hardware list.

  Windows Xp then tried and it seems to work ok with driver default for Microsoft - but only right + left, scroll, front + rear, Alt + Tab appear to function.

  Colleagues, it takes up to a new driver appears!

• What hard drives are compatible for a Satellite L300-1AP?

  My HARD drive is somehow broken :( What hard drives are compatible for a Satellite L300-1AP so that I can something eBay?

  Thank you.

  Hello

  Satellite L300 supports SATA HDD!
  SATA controller having no physical limit, you should be able to use any HARD drive 2.5 SATA. So, for example, a 500 GB 2.5 SATA 5400 RPM HARD drive should be compatible.

  Welcome them

• What floppy drive is compatible with Satellite M40X-119?

  Hello
  My question: which USB TOSHIBA floppy disk drive is compatible with my laptop model? I found in our stores several different FDD: 3109E PA; PA 3109U; PA 3214U. Price $ 26-140. Toshiba sites is not know about these products.
  Thank you
  Sergei

  Hello

  FDD Drive Kit PA3109U-1FDD is compatible with your Satellite.

  Good bye

• The SD-R2612B Combo drive is compatible with Satellite 1800-314

  Please help with the following upgrade:
  The SD-R2612B Combo drive is compatible with the 1800-314?
  Is the version of the BIOS relevant?

  Hello

  Sorry, but I think that this kind of information you can get from a partner Service. Contact with them. You can find Service partners authorized on

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good bye

• NI Stepper drive is compatible with NEMA 11 both NEMA 42 engines step by step?

  I have an NI PXI-7350(Motion Controller), a UMI7774 or (Universal Interface), and a (Stepper Drive) P70530 NOR and tried to connect the new NEMA 11 stepper motor actuator linear Hayden Kirk and kept getting a constant red flashing light on the driver. I then plugged my new actuator linear motor NEMA 23 stepper Hayden Kirk and the pilot got the green light ahead go and it worked fine. I consulted the manual and saw that the driver was compatible NEMA 17-34 Steps. I tried the third affecting both the NEMA 11, nothing helps. Does anyone know a player NI Stepper, which is compatible with my UMI and motion controller and is also compatible with a NEMA 11 and NEMA 42 (another engine step by step I need) stepper motors?

  Hello T.I.

  It is true that our engine controls step by step only have been evaluated and tested for engines not to not NEMA 17, 23 and 34 size. I personally haven't seen or worked with readers with the NEMA 11 or 42 engines step by step, but given that NEMA standards are only a standard size, as long as your engines are under tension, power and plug for your engines to P7000 series inductance, walk, then they should be able to work.

• Age of Empires II - "can't initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  Hello

  I have a problem of Age of Empires 2 running on my new computer. Keeps displaying the following error message: "cannot initialize the graphics system. Make sure that your video card and driver are compatible with DirectDraw. "Someone at - it solutions to this? I have already visited many forums and trying different solutions; None of them helped.

  Tried solutions: change the compatibility and as an administrator, switching to 16-bit color, turn off my graphics card, execution of the extension "nostartup" of the game, looking for old patches from Microsoft (which most are now unavailable due to the game being so old). I KNOW that others have been able to get this game to work on the Windows 7 operating system, but with a few other quirks and I KNOW my video card and driver are more than capable of handling this game. Any suggestions?

  System Specs:

  System manufacturer/model number Dell/Studio 540
  Operating system windows 7 home premium 32 bit
  6 GB of memory
  Graphics card ATI Radeon HD 4350
  Monitor (s) displays Reference Dell ST2410

  Thanks in advance,

  EP

  I had the above problem with AOEII:Age of the Kings. My brief spec is Windows 7 Ultimate edition (SP1) and a card nVidia 8600 GT. I did the following (make sure you reboot after each installation):

  Make sure that you are running the latest patch of AOEII:AOK (2. 0 a):

  http://www.Microsoft.com/download/en/details.aspx?ID=35

  Download and install the latest version of DirectX:

  http://www.Microsoft.com/download/en/details.aspx?ID=5264

  Download and install the latest nVidia Driver suite. I left the autodetect my card software and reset all my default settings. I also installed the full software suite:

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Finally, right click on the shortcut of AOE and click Properties. Click on the Compatibility tab and select the following:

  -Run this program in compatibility mode - choose Windows XP Service Pack 2 (!) NOT 3!)
  -Disable visual themes
  -Disable the Composition of the Bureau
  -Run this program as an administrator

  One of the above options maybe work on its own, but that's what I had to do to make it work and I tested it after each step.

  Good luck!

• Age of Empires 2: Age of Kings does not work on Windows 7. The error is: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  I can't get my Age of Empires 2: Age of Kings drive on my computer.

  It gives me the error message: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  What exactly is DirectDraw. and how can I make my video card and the driver compatible to it. I already tried to uninstall and reinstall the drive.

  Help, please!

  What kind of graphics card you have and you have the latest DirectX and video card drivers? If this isn't the case, update them.

• The mouse does not says "there is no driver for this mouse.

  Original title: Retractable Belkin Mini travel mouse

  All of a sudden my mouse has stop working.  It is said that there is no driver for this mouse.  I used it for about a year.  There isn't any software mouse in particular.  I don't know what could have changed.

  Hi Wandajenkins,

  1 did you do changes on the computer before the show?

  2. what operating system is installed on the computer?

  Follow the suggestions below for a possible solution:

  Method 1: You can run the Microsoft Fixit and see if that does the trick.

   

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: As it was working fine until you can complete the restore of the system and check if the device works very well.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

   

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  You can also contact Belkin Support for assistance on the issue:

  Contact Belkin

  http://www.Belkin.com/au/contactus/index.asp

  Let us know if that helps.