Code could not be sent to my phone for verification purposes?

Similar Questions

• Error "the message could not be sent. "The setting for your outgoing e-mail [SMTP] Server may need to be configured" in Windows Live Mail

  I use Windows Live Mail and it seems to me that they receive an email but I get the following messages and cannot send emails

  The message could not be sent. The setting for your outgoing e-mail [SMTP] Server may need to be configured. To find the server settings for * address email is removed from the privacy *', please contact your e-mail service provider.

  Object "Marriot coverage."
  Server error: 550
  Server response: 550 must be authenticated.
  Server: 'auth.smtp.1and1.co.uk '.
  Windows Live Mail error ID: 0x800CCC79
  Protocol: SMTP
  Port: 587
  Secure (SSL): Yes

  Can someone help me please

  JO

  Original title: Email problems

  Check with your e-mail provider on how the various SMTP (especially the port) settings must be set to confirm that everything is correct. But, take a look at this setting and try to change it if necessary to see if it helps.

  WLMail open

  Right-click on the name of the email account

  Click 'properties '.

  Click the [servers].

  "my server requires authentication" is checked?

  If it is not try to delay it and and see what happens then.

  Note that you may need to click the [Settings] button to enter the necessary info he needed.

• The message could not be sent.

  While creating a new laptop, I dutifully copied details a current e-mail account from the pc, including POP3 and SMTP details. On the laptop, I had no problem receiving emails and has managed to SEND an email to one of my other email accounts, but two other email addresses, I got error when sending e-mail messages, as follows...

  "The message could not be sent. The setting for your outgoing (SMTP) e-mail server may need to be configured. To find the server settings for ' * address email is removed from the privacy *' please contact your e-mail service provider.

  Topic "test test test".

  Server error: 550

  Server response: 550 relay mail to [email protected] is not allowed

  SERVER: 'mail.bigpond.com.

  Windows Live Mail error IF: 0x800CCC79

  Protocol: SMTP

  Port: 25

  ... Unfortunately, on the laptop, for some reason, I can't read the rest of the error message!

  Note: I MANAGED to send another email beforehand, to ' * address email is removed from the privacy *' and I just send another email again to this last address, with no problems at all.

  Can someone explain WHY I can't send emails to certain addresses? Is it because they are listed on my main computer already?

  Thanking you in advance,

  Ben

  Thank you for visiting the Microsoft answers community site.

  The question you have posted is related to Windows Live Mail and would be better suited in the Windows Live Solution Center.

  Please visit the link below to find a community that will support what ask you:

  http://windowslivehelp.com/forums.aspx?ProductID=15

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 0x8007054F code: could not install SP3 for Windows XP

  original title: error 0x8007054F code: could not install SP3 for Windows XP because of the Filec:\windows\system32\drivers\acpi.sys being open or being used by another application. "Internal error."

  I tried to install Windows Service Pack 3 for Internet Explorer8. When you try to install this "priority" update, it begins the installation process, and then returns could not install Windows Service Pack 3 due c:\windows\system32\drivers\acpi.sys file is open or in use by another application. Internal error 0x8007054F. The only thing I have running in this case is the Internet (where I go to get the update) and the windows installation progress. What should I do to get past this problem? Please help me...

  Your loyal customer

  Hello

  
  To work on the issue, refer these methods
  
  Method 1:
  
  Read the following article.
   
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  
  Method 2:
  
  Error messages when you try to install Windows XP Service Pack 3: "Service Pack 3 installation did not complete" and "an internal error has occurred."
  http://support.Microsoft.com/kb/949384
  
  Registry warning:
  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
   
  See also,
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
   
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
   
  Hope the information is useful.

• Every time I have get or send emails I get an error "the message could not be sent because one of the recipients was rejected by the server. 0x800CCC79.

  The message error message could not be sent because one of the recipients was rejected by the server.  No, Server error: 450, error number: 0x800CCC79 but the message is not in the sent box to remove.   I know that I used the wrong email address.   Error message is popping up every time I'm looking for or send emails.  Help

  Hello

   
  1. What on the computer email client do you use?
  2. who is your provider of mail Service?
  
  You can perform the methods provided for in article knowledge base provided if the problem is when you send mail in outlook.
  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
  http://support.Microsoft.com/kb/813514
  
  If it's a hotmail issue, it would be better suited to the Windows Live community. Then I suggest you visit the link that will provide the best support.
  http://www.windowslivehelp.com/product.aspx?ProductID=1

• Windows Mail: Message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing.

  The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.

  The rejected e-mail address was * address email is removed from the privacy *'. "Subject 'Welder must build raised bed (Georgetown)', account: 'pop.gmail.com', server: 'smtp.live.com', Protocol: S account: 'pop3', server: 'pop.gmail.com', Protocol: POP3, server response: '-ERR not supported ca5pf6356717vdc.15', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC18MTP, server response: ' 530 5.7.0 must issue a STARTTLS command first ', Port: 587, secure (SSL): no, the message could be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.

  The rejected e-mail address was * address email is removed from the privacy *'. Object ' Roadtechs.com post: PIPEFITTERS NEED LOUISIANA ', account: 'pop3', server: 'smtp.gmail.com', Protocol: SMTP, server response: 530 5.7.0 must issue a STARTTLS command first. r5sm16402004vdg.17', Port: 587, secure (SSL): no, Server error: 530, error number: 0x800CCC78Server error: 530, error number: 0x800CCC78

  Ensure that the analysis of the electronic mail is disabled (see www.oehelp.com/OETips.aspx#3).  Then delete the account completely and compact and repair the database (see www.oehelp.com/WMUtil/), and then try to add the account back again.  Also check webmail works fine.

  Steve

• Fax and Scan Error - Message could not be sent. Media is write protected

  I have a PC with Windows Vista Ultimate on it.  Turns off user access control.  On the sign as Admin will have all the rights.

  Windows Fax and Scan works very well for a long time.  Had a modem comes to shove, he replaced everything works fine.

  In the last day or two - with no known changes to the system - the system is no longer send and receive faxes.

  It gives me an error-"message could not be sent.  the media is write protected. »

  This happens if I try to send a fax directly from the Windows fax software or if I try to "print" a document by fax.

  When you receive a fax - it gives a similar error.

  It works as records receive faxes are unalterable and, if I look at their properties in Explorer.  I try to uncheck Read-only and it acts like it works only when I get back - read-only is still selected.

  Other times I tried to make changes to access to the files by Windows Fax, fax settings - but it tells me that I have to be logged on as administrator to make these changes and I signed up as an administrator - the only Director on the PC.

  I also removed the Fax profile and recreated.  I think that the question is the property read-only on my directory of fax, but for some reason that seems locked on.

  I also shot the back, rebooted, turned off UAC back, rebooted and tried to change the settings of RO, no luck.

  Any ideas or suggestions would be greatly appreciated.

  Thank you!

  Read-only for folders is normal (mine are).  See if this fix works for you:

  Fax Error: The message could not be sent. Media is write protected

  If the registry change is useful, please let us know.

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Windows Fax and Scan-do can't fax any type of attachment "the message could not be sent. These data are incorrect. »

  Original title: Windows Fax and Scan is unable to fax any type of attachment

  I am trying to send a PDF using Windows Fax and Scan Ver 6 Build 6002 SP2.
  I get "the message could not be sent.  These data are incorrect. »
  I can send a cover sheet, or something typed into the dialog box, so the modem works fine.
  The problem is with an attachment to a fax.  Tried to PDF, DOC, ZIP, JPEG, and TIFF.
  I found lots of posts with the same problem, but no solutions or problem.

  Windows Vista Business SP2, Adobe Acrobat 9 Pro using

  Just ran the SFC system (C:\windows\systems32\sfc/scannow) and repair files corrrupt.  WF & S now works well when you attach files.

• Problems installing drivers for printer EPSON L110. Error message "Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.»

  Original title: trouble installing the drivers for my printer.

  Hello

  I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.

  Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.

  I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.

  TKS

  Gerard

  Hi, Germain,.

  This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.

  http://www.Epson.co.in/epson_india/ink_tank_system_printers/product.page?product_name=Epson_L110&tab_index=4

  See the articles for more information.

  Install a printer

  Find and install printer drivers in Windows 7

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Not ok so no support phone for PSE. But they help says to contact technical support. After trying I'm getting sent on this forum. man, I feel the love... Do not you?

  Not ok so no support phone for PSE. But they help says to contact technical support. After trying I'm getting sent on this forum. man, I feel the love... Do not you?

  So my laptop HD died right after the installation of PES 14 so I have a new. responsible of the SW and even updated. Whenever I run I told myself I've exceeded the number of computer and I need to turn off a computer. I can't he died. How can I get more of this obstacle?

  So my laptop HD died right after the installation of PES 14 so I have a new. responsible of the SW and even updated. Whenever I run I told myself I've exceeded the number of computer and I need to turn off a computer. I can't he died. How can I get more of this obstacle?

  View of a regulation, the only way is to deal with Adobe.

  Contact them via this link, work your way through this step - by - step and finally try to start a chat session.

  Contact the customer service

• I get an error-10 installation code, could not download, what should I do to solve this problem?

  I get an error-10 installation code, could not download, what should I do to solve this problem?

  Taylor,

  You can try this:

  https://helpx.Adobe.com/creative-cloud/kb/download-update-errors.html

  http://myleniumerrors.com/working-with-your-operating-systems-tools/

• AMT: could not resolve the connect identifier specified for FORMS

   HI
   I have just installed  Forms and Reports 10.1.2 On My  windows xp OS then i installed TOAD i am able to connect to my daata base using TOAD:
  But my forms and reports are not able connect to Backend. giving "TNS:could not resolve the connect identifier specified for FORMS " error;
  
  i have only one oracle home ;
  can any one guide me right direction .
  
  why i am not able to connect forms &reports  .

  Published by: vijay dida on December 24, 2009 09:03
  
  Published by: vijay dida on December 24, 2009 09:05
  
  Published by: vijay dida on December 24, 2009 09:05

  Hello

  First check if you can successfully tnsping database on the command line. Or you are able to connect Toad, so that when you call Toad, you can see the location of the tnsnames.ora it file use. Just set the parameter TNS_ADMIN at the user level, so that the other application will also use the correct tnsnames.ora file for database name resolution.

  Concerning

• Account blocked (again) Hotmail - have cell phone for verification

  My email account keeps blocking.

  E-mail address is removed from the privacy *.

  I don't have a cell phone for verification, which

  results by not being able to solve the problem

  myself.

  Any help would be greatly appreciated.

  Thank you.

  Hello

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

• LabVIEW support 3 error code: could not load front panel

  Hello

  my colleague has a problem after the update to LV2011 (from 2010) and now get: LabVIEW support error code 3: could not load front panel

  Even on my system (also tried a massive compilation)

  

  He's afraid of losing some of his works.

  Zipped file is attached

  Hi Henrik,

  It should work now.

  Instructions to fix a corrupted in 2011 VI or more:

  1. close LabVIEW

  2. Add connPaneRecoveryMode = true to the file LabVIEW.ini (-the file LabVIEW.ini is located in the folder of National Instruments > LabVIEW 2011 > LabVIEW.ini)

  3. open the VI corrupt.

  4. press CTRL + A on the block diagram and the copy / paste to a new VI.

  5. save the new VI.

  6. close LabVIEW and remove the token of the ini (VERY IMPORTANT)

  7 restart LabVIEW and load the new VI and check that it is correct. Save

  Cheers, RMathews

• "Problems with Outlook Express" the message could not be sent because the server rejected the sender's e-mail address.

  On outlook express, I get the following error message "the message could not sent because the server rejected the sender's e-mail address. How can I eliminate this problem, please?

  I can find no trace messages claim are waiting for shipment.

  Unsent Mail file, do you mean the Outbox? Check: File | Work offline and in: reviews | Layout: uncheck the preview pane and delete the messages. Otherwise, delete the Outbox.dbx file in the message store.