Code error 0x6d9 but the windows firewall is turned on

Similar Questions

• Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

  I hope this helps...

• When trying to activate Windows Firewall manually, get code error 80070422 0 x ' windows firewall cannot change some of your settings.

  I use windows 7.

  my windows firewall was disabled. When I click on turn on the firewall, that a message "Action Center can't turn on the firewall".when I try to turn on manually I get an error report that says error code 80070422 0 x ' windows firewall cannot change some of your settings.

  can someone please help?

  PS.i recently had a virus.

  See the thread below for a possible answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/cannot-start-Windows-Firewall-for-Vista/8d3ab846-d5a9-4DF1-bb1e-a6f4842abc63

• Unable to see if the Windows Firewall is turned on

  In the Security Center Windows (from Control Panel) - cannot say if firewall on or not? Click on firewall - get

  message: "due to a problem not identified, Windows cannot display Windows Firewall settings.

  Hi Chris,
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps.
  Brian

• the Windows Firewall has stopped working

  I tried the system restore to just before it stopped working

  Hi geoffrey,.

  System restore would have been my first suggestion, so that was an excellent choice on your part.  I would try it again maybe a few days earlier just to be safe, he did not start before you really notice or before, it became clear, as it is certainly the simplest answer, but frankly, I doubt that it will be more effective (but who knows - he can come back works perfectly and we are both happy, it was considered).  He also suggested that you know a little about computers, so I can provide instructions that contain everything you need but I will not go into nauseous detail unless you get stuck on a step and then you should post any problem you encounter and I will provide more help.  If you should post, don't forget to answer as many questions and include both the results of the proceedings or reports or copies or screenshots of screen that you can at the same time, so we can work on what to do then if none of this made the turn.

  How do you know if what she has stopped working?  Do you have an error message (if so, what was the full and exact message Word for Word, including all codes)?  You have more than one firewall installed on your system (like that which is part of Norton Internet Security, Comodo, or something else)?  What security programs do you use and that you have installed (all names and versions)?  What version of Windows you are using (for example, 32-bit Vista Business SP2 or other - please be precise otherwise)?  When this occurred and did you a software or a hardware changes (additions, deletions, upgrades or anything like that) since two weeks before the problem (if so, precisely what has been done in as much detail as possible)?

  Do you get this Center security or firewall Windows itself?  If you are using XP, post back with answers given that there is a limit to the options how can I cover without knowing the basic information.  If you use Vista or W7, go to Security Center or action center and check to see if there is a problem with the notification of the firewall or it's on.  If it's not on, it shows the details or links containing information about the problem?  If Yes, go to these links and copy the information and post here, so we can look at.

  Then go into firewall Windows itself (on the left side of the screen) and confirm that there is a problem.  If she too says it is disabled, click on change settings.  Make sure the firewall is turned on - if not turn it on, click on apply and then click OK and confirm that it starts and begins to work.  If it does not start, it provides an error message (If Yes, what is completely and exactly Word for Word with all codes)?  Click Advanced, and verify that all network connections are checked - make if all are not and click OK, then again try to turn on the firewall.

  If this does not work, go to start / Control Panel / Administrative Tools / Services and then highlight the Windows Firewall and click Open.  Click dependencies and go to each of them and make sure they are started and automatic.  Otherwise change it to automatic and start them.  If it is impossible to do, check their dependencies and do the same until you reach the end of the chain of dependence.  Now return to Windows Firewall and make sure that it is set to automatic and started.  Then restart.  When the system returns, return to the service and confirm that the Windows Firewall is started and automatic.

  Now, go into Windows Firewall and again try to launch and see if it lights.  Go to the center of security or Action and check that the firewall is enabled and works.  If so, the problem can be solved.  Just to be sure, restart and check the firewall to ensure that it is on and working.  If so, who should be the one.  But we do not know why it stopped, and if the problem may come back, then we must redouble efforts to find the cause or confirm that there is no problem.  Moreover, if the above did not work and Windows Firewall is still off, here's what you should do in any case.

  Go to start / Control Panel / administrative tools / Event Viewer and look for error messages regarding the Windows Firewall (there will be errors).  Look in system first and then in Applications.  When you find the error or errors, click on it for details, copy these details and display them in your next reply.  Well, they can help us identify the source of the problem and there a fix for it.

  We will check your system and hard disk for corruption files and try to fix it:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  , Type sfc/scannow go and let it run.  It will scan and try to the difficulty of some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  They tried to set itself to run at the next reboot.   Answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  Then, we will confirm this is not caused by a malware any.

  Update and run a full scan with no matter what security software you use, and remove or quarantine everything you find.

  First, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx. This may or may not remove the infections, but will probably not correct the damage caused by them. Even if they or your current AV software seem to work or indicate that you are not infected, you should not completely trust in them and must continue with the recommendations that follow (so it's up to you if you want to try them first, or just ignore all this and get help from an expert you really need as described below).

  Correctly and completely remove these infections can be complex and often require manual removal procedures (which may or may not be entirely effective either). Even if they work, I suggest what follows in any case, so that we can start it (you can ignore the methods above if you want it really is the way forward, but it won't hurt to them for trying).

  Please follow these recommendations of JimR1 - MVP compliments:

  You are running Microsoft Security Essentials?

  If Yes: start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected - and support and select the option for phone, chat or email (options vary depending on the region)

  If you are in North America, you can call 866-727-2338 for a free Microsoft Help for infections of virus and spyware.

  Otherwise:

  You can start here: https://consumersecuritysupport.Microsoft.com/ or here: http://support.Microsoft.com/contactus/cu_sc_virsec_master?WS=support#TAB0 for the help and support for malware infections.

  If this does not work, or that they can't help, try one of the compliments of forums-remove malware following PA Bear - MVP:

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?Board=10.0 http://www.spywarewarrior.com/viewforum.php?f=5 http://www.dslreports.com/Forum/Cleanup http://www.Bluetack.co.uk/forums/index.php and http://Aumha.net/viewforum.php?f=30

  I hope this helps.  If none of this worked, then after return with answers to ALL the questions above (especially the first paragraph) and the results of all the procedures and the test that you tried in as much detail as possible and with two copies of reports or screenshots (as you prefer).  Without this information, we do not know where to go next without guessing or recommend a more radical proposal that may be required.

  Good luck!

• Try to turn on the Windows Firewall for vista home basic, the code of error 0x6D9

  I need help to turn on my windows vista basic home firewall but get error 0x6D9 code. This makes me crazy... I pay your bills online and can't do anything until my firewall is on

  Hi William,.
  Follow these instructions to fix the Windows Firewall:
  Download and install Windows Repair:
  http://MajorGeeks.com/tweaking.com_-_Windows_Repair_d7141.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• I get an error 0x6D9 code when I try to start the Windows Firewall.

  Original title: the firewall of Windows 7 sp1

  Hi, I have Windows 7 sp1, and I ran Norton 360 for a year (don't know if that accounts for nothing). Now when I try and turn on the firewall of Windows I get error Code 0x6D9. I went through the solutions posted some time ago, but whenever I try to turn on the firewall, it says use firewalls to update the recommended settings, but it won't do anything. Can anyone help because people seem to say that the Windows Firewall is better than a free.

  Hi Jim,.

  Thank you for keeping us posted.

  I would have you look at the responses of the wire-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry - http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/i-get-an-error-code-0x6d9-when-i-turn-on-the/3f7f6e10-10c9-44C9-9EF7-9a041d5aa705?msgId=57b364f2-1521-4CB4-9835-219fa6530f60

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• I cannot start the Windows Firewall, I get an error 0x6D9 code

  Original title: error 0x6D9 Code

  I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.

  Thank you.

  Original title: error 0x6D9 Code

  I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.

  Thank you.

  1 know if your AV (anti-virus) program is supposed to disable your Windows Firewall. Some do it.

  2. you do not do so in respect of the services? You do it in this way? ...............

  Start > Search box, type ser > press the Enter key > scroll down to Windows Firewall...

  under status, it lies and must say... Has begun

  under Type of status, it must be said... Automatic

  If it does not say that, right click on Windows Firewall > properties...

  in Startup Type, click on the pointer, and then select Auto

  to the service status, click Start

  Click OK when finished.

• I get an error code 5 when I try to start the Windows Firewall.

  Original title: Windows 7 firewall

  I can't start Windows Firewall, I am on Windows 7. I have read and followed all kinds on this Forum lately. Nothing seems to work. Own for malware, spyware and viruses.

  This is driving me NUTZ, my mistake in Services tries to start the firewall, "Windows cannot start the windows firewall on the Local computer, for more information, review system event log, if it is a Service of Microsoft no, the Service provider contract. And refer to the 5 service-specific error code.

  What Else can I do? All I want to be able to do is share my printer between my two PC again. Help!

  I solved this problem. I now have a new One.

• Impossible to activate the Windows Firewall - error code 0 x 80070422

  Hello

  This is the first time I see that the windows firewall is disabled and when I try to turn the action center it shows like below. then when I click on manual settings it shows as the second screen.

  I tried to install the updates from HP, but it shows again a red alert in the Security State, see below.

  Currently, using Quick heal Total security and it is valid for 3 years.

  4 HP ENVY laptop - operating system: Windows 7 Home Basic 64 - bit Service Pack 1

  Please advice how to solve this problem, thank you.

  

  

  

  Hello

  As you have difficulties to turn the firewall please find the steps below to resolve this issue.

  Perform the following steps and install automatic updates and then try to turn on the firewall.

  Run an online scan to check any virus or any other malicious software:
  http://OneCare.live.com/site/en-us/default.htm

  Run as Administrator Security Center;
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-security-and-safe-computing

  Perform the following steps and update the computer:

  1. click on start, type Notepad in the start search box, and then click Notepad in the list programs.

  2 copy the following text, and then paste the text into Notepad:

  start wuauserv sc config = auto

  SC config bits start = auto

  SC config start = auto DcomLaunch

  net stop wuauserv

  net start wuauserv

  net stop bits

  net start bits

  net start DcomLaunch

  Click file, click Save as, and then type Repair.bat.

  3. in the file type box, click all files (*. *).

  4. in the save box, click Desktop, and then click Save.

  5. in the file menu, click on exit.

  6. right - click on the Repair.bat file that you saved in step 5, and then click Run as administrator. This action starts the required services. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  7. try again to install updates. If you install the updates, delete the file Repair.bat. To remove the file Repair.bat, right-click Repair.bat, click on remove and then click Yes.

  ·         Try to activate the firewall after these steps.

  Hope this information is helpful to you.

  Chetan 
  I work on behalf of HP

  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.

  Click on the STAR of CONGRATULATIONS on the left to say 'Thank you' to help!

• I get an error of 0x8007042c code when I try to turn on the Windows Firewall.

  Original title: firewall of windows 7 is not not useful

  can not turn on the windows firewall 7 on Dungeon receives an error of 0x8007042c

  I tried many other suggestions, without success. Help would be very appreciated

  See the Microsoft Knowledge Base article to resolve the error of 0x8007042c - http://support.microsoft.com/kb/2530126

  Jim

• The Windows Firewall has stopped working, 0x8007042c error code

  The Windows Firewall has stopped working.

  See if this helps: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/firewall-will-not-turn-on/57a4cce5-835f-e011-8dfc-68b599b31bf5

• Firewall error code 0 x 80070424 & code error 0x6D9

  Hello
  I got an alert saying my firewall is disabled, I tried to turn on but I could not because of the error 0x6D9 code, I tried to update my firewall settings, but it says I have the error code 0 x 80070424. THEN I read somewhere here to change to automatic windows firewall in service as an administrator, but I couldn't even windows firewall in the list to change it. I also tried several antivirus, malware, security does scan like System Mechanic, Mcafee and ESET... no luck... THX in advance, hope you can help me.

  -Kim

  Hi Kim,

  Follow these instructions to fix the Windows Firewall:

  Download and install repair Windows:

  http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html

  When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:

  -Reset the registry permissions

  -Reset the permissions of files

  -WMI repair

  -Repair Windows Firewall

  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.

  Brian

• Event ID: 7024 with error message: "the Windows Firewall service stopped with the error service specific data are invalid.

  Original title: cannot start Service Windows Firewall: Error Code 13

  Hello.

  Anyway, the Action Center has begun randomly telling me that the Windows Firewall is disabled. When I try to start or return to the default settings, it tells me that it is not able to do.

  I went to Services and Windows Firewall is set to automatic, but it is not started. I try to start it and it tells me that it is not able to do the same. The error code is 13.

  I am an administrator.

  MalwareBytes did find and delete a virus named "Disable.SecurityCenter", but after removing that I am still unable to start the Service.

  Can someone help with this problem?

  Edit: The journal ID is 7024 and description:

  "The Windows Firewall service stopped with the error service specific data are not valid... '. ».

  Hello, Connor

  You can try to perform a system restore to before that the problem started. For instructions on how to proceed, see the following ink: System Restore: frequently asked questions

  You can also try running a SFC scan to check (and repair) system corrupt/modified files. To do this, go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. In the command prompt, type the following command and press ENTER: SFC/scannow

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Message error "Windows could not start the Windows Firewall on the Local computer.

  I was check the status of the Windows Firewall and I got a message saying "update your firewall settings" and "use recommended settings" option. However, when I click on this option, my cursor is occupied for a while, but nothing happens then.

  I tried from Windows Firewall in the list of Services, and I got this error: ' Windows has no start Windows Firewall on the Local computer. " For more information, see the system event log. If he is a non-Microsoft service, contact the service vendor and refer to service 13-specific error code. »

  I also tried to fix problems using Windows Fix - It, but these two problems were still attached. Help, please.

  Thank you.

  If you have a malware infection in not too distant past, this could be a relic.

  First, run Disk Cleanup to rid the system of temporary Internet files. These can seriously slow down a Malwarebytes scan.

  Then run Malwarebytes.

  http://www.Malwarebytes.org/

  Time of installation, make sure that you do not check the box to install the trial PRO version...

  How to use Malwarebytes

  http://www.bleepingcomputer.com/virus-removal/how-to-use-Malwarebytes-anti-malware-tutorial

  Follow-up to the ADW cleaner...

  http://www.bleepingcomputer.com/download/adwcleaner/

  Do NOT click on the GREEN download button because it will bring only sadness. Use the right BLUE button below.

  When you are satisfied that there is nothing wrong in the system, re-run Windows patches...