Codec H264

Similar Questions

• Open video codec H264 appeared on my plug-ins. What is it?

  Open video codec H264 appeared on my plug-ins. What is it?

  Hello kstatter, it is used for webrtc (real time communications) features in the browser. For more technical details on the issue also to refer to http://andreasgal.com/2014/10/14/openh264-now-in-firefox/

• Why can not import AVI codec H264 video?

  Amazing! I don't know what to say, when you import the guest of the file doesn't support or damage

  I have a question sent twice, I'm sorry, I hope that this software comes with convert CFR, but this software has many problems, my normal save AVI video, using the most common H264 codec, the file is not a problem, the software application error?

  I use the MP4 format to import, use the same codec, the result is imported successfully!

  OK, I love this software, this software can improve it? I know, it can use the transcoder / converter to solve, but too much trouble!

  First does not support H.264 in an avi container.

• Lack codec h264 in after effect CC (2015)

  Hello.

  Miss me the h264 codec in after effect CC (2015). the problem persists for about a year. I have this codec in first pro, but not after the effect. What can I do?

  After effects encodes is more directly in H.264 (he didn't do a great job of it in the past). You can return an intermediate codec to EI or send your AE comp directly to Adobe Media Encoder.

  I almost always rendering directly to EI. This is because AE CC 2014 multiprocessing. So, I'll work in 2015 CC to enjoy snappier interface and open the project file in CC 2014 to make with multiprocessing (as my system can use this feature very well in most of the projects).

  Here's the Adobe blog about uninstalling: using Adobe Media Encoder to create H.264, MPEG-2 and WMV videos get out of After Effects

  If you talk to a lot of Veterans around here, they will say that the AE h.264 encoder was buggy and did not do a good job. They call deletion "good riddance." The AE team is small enough, so put their resources to improve the work of EI to VFX compositing and motion graphics, and leave the team work Adobe Media Encoder encoding of things seems logical.

• What container do I need for codec H264?

  Hello

  I'm quite new to video editing. A friend of mine who is an experienced video editor said I should use the H264 Codec. I shot the images with my iPhone 6 and want to create videos for Youtube. That no container I chose when I create a new sequence in my first Pro CC 2014 project?

  Thank you in advance,

  Oliver

  Hi Oliver,.

  (You can just import your iPhone clips and drag one of them to the new question button) the stationery button) at the bottom of the project Panel.  It will implement a sequence to match the settings of your phone footage.

  Then when export you can send it to Media Encoder (file > Media export and then click the queue button) and use the vimeo or Youtube presets - probably a 1080 p set.

  It's the easiest way for you to go without becoming accustomed to the selection of parameters/export formats.

  Regarding the H264 codec that normally lives inside a .mov or .mp4 container.

  Hope this helps

• ProRes 422 LT or H264 source clips?

  For a particular edition project each video clip has been provided to me by two codecs: H264 (directly from the device) and Apple ProRes 422LT (I think that these have been produced via the compressor original H264 clips). I need now to start editing in FCP X. The question is which set of clips should I load in FCP X? 422LT tongs are four times the size of the H264 clips and so will gobble up the disk space. Is that their advantage uses them, instead of H264 clips with proxy files created by FCP X for editing?

  Thanks a lot for your comments.

  If you have a newish, with fast CPU and GPU computer, then there is probably no need to use the LT files. You also should not need proxy files either, unless you do a multicam project.

• 55VL900a TV play Mp4 H264/VAC port USB loses Audio Sync during playback of video

  Hi all...

  I have a problem with my TV (55VL900a). I would like to convert all my video media type that both my Ipad and my TV can play. So far I have not been able to find a combination that plays on both.

  I'm close, when convert a MP4 (container) file using the Codec H264 / AAC audio, it plays perfectly on my Mac and on my Ipad, but when I play via the USB port on my TV the sound synchronization and progressively worse fate gets more through video, I get. I find a few words on the 70 minutes mark the file becomes a watchable.

  Interestingly, when I even convert video to mkv contatiner (also H264 / AAC) is no problem. Plays perfect. What is good in what I used the TV, but bad in that I need two copies of everything, 1 for TV one for the Ipad.

  My Question is, is how much the TV is... ? Other people have this problem or is it my that defective TV. ?

  Some would like to help... Thank you guys.

  > Interesting fact, when I even convert video to mkv contatiner (also H264 / AAC) no problem

  In [Manual VL900A | http://www.mytoshiba.com.au/file/product/manual/5187/55VL900A.pdf] (page 70) you will find a list of files and codecs that are supported in my internal media player formats.

  If you want to use the MP4 media format, the codec supported are:
  _ * Video * _
  H.264 (MPEG-4 AVC)
  Part12 MPEG-4: 14
  * Audio _ * _
  MPEG-1/2 Layer 3
  MPEG-2/4 AAC LC
  MPEG-4 HE - AAC

• AVI, no video but Codec not installed

  Import an avi file in first Pro CS5 results in Audio only. What else is Premiere Pro must recognize the video?

  There are a few other subjects in which first accepts import an AVI in silence but think it's an audio file, there is no video. Recommendations and corrections were generally avi video codec is not installed.

  However, in my case the codec may actually be installed. They gave me some pictures by a high school by his camera Vado. GSpot (worm (2.70 Build 20070222) claims the Codec H264, name: H.264/MPEG-4 AVC, status: installed.)

  He also gave me an executable which we thought was something to install Vado codec, but that doesn't seem to help (I don't even know the installation worked)

  GSPO export report is copied below.

  Thanks for any help on what to do next.

  Lee

  --------------------------------------

  GSPO 'export ': report

  -Information about files-
  File name: VID02160. AVI
  Name of the file (with the full path): 21-25\Day 1 avi\VID02160 2010\June D:\Video\Messiah\VBS. AVI
  Size of the file (in bytes): 14,795,882
  
  -Information on the container-
  Database (for example, "AVI") type: AVI (.) (AVI)
  Subtype (e.g. "OpenDML"): AVI v1.0.
  Interleave (in ms):
  Preload (in ms):
  Alignment audio ("split through the interleaves"):
  Total system Bitrate (Kbps): 0
  The missing bytes (if any): 0
  Number of Audio streams: 1
  
  -Video information-
  Video Codec type (e.g. "DIV3"): H264
  Video Codec name (for example "DivX 3 Low - Motion"): H.264/MPEG-4 AVC
  Visual codec of status (e.g. "Codec is installed"): codecs are installed
  Duration (HH): 0:13.933
  Number of images: 418
  Width (in pixels) of the frame: 1280
  Frame height (pixels): 720
  Ratio ("SAR") Aspect storage"1.778
  Format of the pixels ("PAR"): 1,000
  Display the image format ("DAR"): 1.778
  Frames per second:
  Frames per second: 30,000
  Pictures per second: 30,000
  Video Bitrate (Kbps): 8305
  MPEG-4 ("MPEG-4" or ""):
  B - VOP ("B - VOP" or ""):
  QPel ("QPel" or ""):
  GMC ('GMC' or ""):
  NVOP ("NVOP" or ""):
  H264 ("H264" or ""):
  Quality factor (bits per pixel) / frame: 0.300 "
  
  MPEG-2 ('MPEG-2' or ""):
  Interlaced (' I / L ' or ""):
  Progressive ("Prog" or ""):
  Top framework first ("FFT" or ""):
  Lower field first ("BFF" or ""):
  3:2 Pulldown ("3:2" or ""):
  Photo-Champ ('WP' or ' '):
  
  -The proportions related-
  
  Broadcasting standard: 'PAL' (of another empty)
  Broadcasting standard: "NTSC" (of another empty)
  CBC: "VCD", "SVCD", "Disease Cardiovasculaires", or "DVD (another empty):
  Instructions to convert VCD, first part:
  Instructions to convert to VCD formats, second part:
  Instructions to convert SVCD, first part:
  Instructions to convert to SVCD, second part:
  Instructions for converting CVD, first part:
  Instructions to convert to the CVD, second part:
  How to convert DVD, part one:
  How to convert DVD, second part:
  Instructions to convert AVI, first part:
  Instructions to convert to AVI, second part:
  
  -Audio information-
  MPEG (for example "0xbd') stream ID:
  MPEG, VOB files Substream (e.g. "0x80"):
  Audio codec (for example "AC3"): 0x0002 (ADPCM)
  Audio Codec status (e.g. "Codec is installed"): codecs are installed
  Audio sample rate (Hz): 44100
  Bitrate (kbps) audio: 177
  Audio bitrate Type ("CBR" or "VBR"):
  Number of audio channels (for example, "2" for stereo): 1

  FWIW: I converted some DivX clips the other day to make them usable.

  I used AVS Video Converter (and AVS Video Editor) for the task.

  A clumsy process, but it worked and did the work.

• Update/change the firmware on a Camileo P30

  Hi, I'm new here... I have a little problem with two * camcorders Camileo P30 *.
  They appear to be identical, they have been purchased at the same time and from the same retailer, and they also have the same code number (PX-1496E-1CAM). And yet, they have two different firmwares.

  So different all in one, full HD, grab AVI with codec H264 files and a 1440 x 1080 frame size, the other, with documents same settings_ recorded files MOV with encoder prunedecythere STROKE and a frame size of 1920 x 1080.
  WHAT GIVES?
  It is a * MAJOR * incenvenience for me, since I bought two identical camcorders precisely the advantage of having to deal with the same kind of audio and video files!
  Is there a way to change the firmware one (or two) camcorders so having two machines _identical_? (On at least a / v files)

  Please let me know something... Thanks in advance

  Alex

  Hey,.

  > So different that all in one, full HD, AVI files with H264 codec and a grab image size 1440 x 1080, the other, with the same settings files MOV with encoder AVC prunedecythere records and a frame size of 1920 x 1080.
  What happens if the record with a resolution identical film, e. g. HD 1080 p? Usually two cameras should save some MOV files as mentioned in the user manual.

  You can post versions of firmware on both devices please? It would be interesting

  I would try to reset the camera which records avi at the default settings files. Go to the menu of the camera, select default settings.

  If it doesn t work I would contact an authorized service provider. Normally, they should have an explanation for that if it of normal or not.

• Video conferencing does not work with the voice gateway PVDM3?

  Hello world

  I'll create a meetme conferencing. However, what config it use VGA, audio conference is only allowed

  Here's the material:

  • PVDM3-32 x 2
  • VIC2-2FXO
  • VIC3-2FXS/DON'T
  • 9971 ip phone x 3

  Here is the config VG (work),

  VG (config) #.
  !
  voice-card 0
  dsp-booking voice-service 6
  !
  dspfarm profile 1 homogeneous conference video
  Codec g729br8
  Codec g729r8
  Codec g729abr8
  Codec g729ar8
  Codec h264 cif-cadence 15 bitrate 128 Kbps
  maximum of participants at the conference 4
  maximum 1 x 1 layout
  maximum sessions 1
  associate the PCRS application
  !

  Here is the config VG (failure),

  VG (config) #.
  !
  voice-card 0
  dsp-booking voice-service 6
  !
  dspfarm profile 1 homogeneous conference video
  Codec g729br8
  Codec g729r8
  Codec g729abr8
  Codec g729ar8
  Codec h264 vga-cadence 30 bitrate 1 MB/s
  maximum of participants at the conference 4
  maximum 1 x 1 layout
  maximum sessions 1
  associate the PCRS application
  !

  Here is the result of the test with different codec

  • OK - h264 qcif-cadence 15 bitrate 128 Kbps
  • OK - h264 cif-cadence 15 bitrate 128 Kbps
  • Fail - h264 cif-cadence 30 bitrate 704 Kbps
  • Fail - h264 vga-cadence 30 bitrate 1 MB/s

  When you use the Cisco.com DSP calculator ,
  1 profile of videoconferencing
  Session number: 1
  number of participants: 4
  Conference type: homogeneous - 1 class
  H.264 VGA: checked

  It returns:

  Allocation of Module DSP:
  Router Slot 0: 16 video (25%) 4 votes (7%) 44 available (68%)
  PVDM Slot 0/0: PVDM3-64

  So, why can't I use the VGA with PVDM3-64?

  Thanks in advance

  Sam

  Do not forget this:

  Announces Deprecation feature video conferencing and transcoding using PVDM3 on the product for the ISR G2 Bulletin

  http://www.Cisco.com/c/en/us/products/collateral/unified-communications/TDM-gateways/bulletin-C25-735945.html

• TP, video call Cube for the Cube

  Hello world

  I need some advice,

  I have two side;

  First; CCM 6.1.5 + CTMS (Cisco telepresence Multipoint Switch) + Telepresence Cisco 3845 (c3845-adventerprisek9_ivs - mz.124 - 22.YB8.bin) of 1000 +.

  Second; CTMS + TP + CCM 8.5 1000 + 3945 (3900-universalk9-mz. Spa.150 - 1.M4.bin).

  I tried video call on the cube for the cube. I did some configs but will try tomorrow J.

  I need some answers:

  • 3845 router has not mpov, mpov it mandatory for cube calls?
  • 3845 router is it need license for cube?

  Here's the configs;

  3945 router config-

  voice, send rtp-received

  !

  voip phone service

  allow sip to sip connections

  Fax protocol t38 ls-redundancy hs 0-redundancy help 0 no

  SIP

  binding control source-interface GigabitEthernet0/0.21

  bind media source-interface GigabitEthernet0/0.21

  offer-early forced

  !

  voice class codec 1

  Aacld of preference profile 1 Codec 1

  Profile of h264 codec video 2

  !

  !

  interface GigabitEthernet0/0.21

  encapsulation dot1Q 21

  address IP CUBE3945 I_WANIP

  !

  !

  IP forward-Protocol ND

  !

  IP http server

  no ip http secure server

  !

  !

  !

  !

  aacld profile 1 codec

  fmtp "fmtp:96 profile-level-id = 16; streamtype = 5; mode = AAChbr; config = B98C00; sizeLength = 13; indexLength = 3; indexDeltaLength = 3; constantDuration = 480.

  !

  !

  Codec h264 profile 2

  fmtp "fmtp:112 profile-level-id = 4 d 0028; apors-parametersets = R00AKAmWUgDwBDyA, SGE7jyA =; radio-mode = 1.

  !

  !

  Dial-peer voice 1 voip

  Description to_CCM85

  service logon

  RTP payload type cisco-codec-fax-ind 110

  RTP payload type cisco-codec-aacld 96

  RTP payload type cisco-codec-video-h264 112

  session protocol sipv2

  session target ipv4: CCM85_IP

  incoming called number 10...

  codec voice-class 1

  DTMF-relay rtp - nte

  !

  Dial-peer voice 2 voip

  Description to_CCM615

  service logon

  destination-model 7...

  RTP payload type cisco-codec-fax-ind 110

  RTP payload type cisco-codec-aacld 96

  RTP payload type cisco-codec-video-h264 112

  session protocol sipv2

  session target ipv4: 3845cube_wanIp

  codec voice-class 1

  DTMF-relay rtp - nte

  !

  3845 router config-

  voip phone service

  media stream-autour

  allow sip to sip connections

  SIP

  binding control source-interface GigabitEthernet0/1.21

  bind media source-interface GigabitEthernet0/1.21

  offer-early forced

  !

  !

  !

  voice class codec 1

  Aacld of preference profile 1 Codec 1

  Profile of h264 codec video 2

  !

  !

  !

  interface GigabitEthernet0/1.21

  encapsulation dot1Q 21

  address IP CM6_wanIp

  !

  aacld profile 1 codec

  fmtp "fmtp:96 profile-level-id = 16; streamtype = 5; mode = AAChbr; config = B98C00; sizeLength = 13; indexLength = 3; indexDeltaLength = 3; constantDuration = 480.

  !

  Codec h264 profile 2

  fmtp "fmtp:112 profile-level-id = 4 d 0028; apors-parametersets = R00AKAmWUgDwBDyA, SGE7jyA =; radio-mode = 1.

  !

  !

  !

  Dial-peer voice 1 voip

  Description to_CM8

  service logon

  destination-model 10...

  RTP payload type cisco-codec-fax-ind 110

  RTP payload type cisco-codec-aacld 96

  RTP payload type cisco-codec-video-h264 112

  codec voice-class 1

  session protocol sipv2

  session target ipv4:3945_wanIp

  DTMF-relay rtp - nte

  !

  Dial-peer voice 2 voip

  Description to_CM6

  service logon

  RTP payload type cisco-codec-fax-ind 110

  RTP payload type cisco-codec-aacld 96

  RTP payload type cisco-codec-video-h264 112

  codec voice-class 1

  session protocol sipv2

  session target ipv4:CM6_IP

  incoming called-number 7...

  DTMF-relay rtp - nte

  !

  Best, thank you...

  Barris salvation,

  Try adding the following configuration:

  voip phone service
  RTP ssrc multiplex
  address - hide
  allow sip to sip connections
  SIP
  midcall-signalling passthru
  tcp transport session
  passage of Header error-passthru
  amp content sdp
  rel1xx disable

  Thank you

  Paul

• Unable to import file .mp4 in first - "Unsupported format or file damaged."

  Hi all

  I have the video from a surveillance camera system I am trying to import into first. The program is iVMS-4200 by Hikvision. I download files to my desktop fine .mp4 and they initially only played in VLC... until I have download a plugin on the site of Hikvision and now he plays as well in Windows Media Player. I thought that plugin would be favourable import in first, too, but he did not.

  First says "Unsupported format or corrupted file" and will not import the video file.

  Encoder says "FILE name could not be imported. The source file appears to be corrupt. Check that it is a valid file. »

  I am able to convert the file with a third-party program and import it, but if I could skip this step and import the straight line of files for the first that would save me hours and hours of conversion time.

  Here's the info from the video file:

  Type: video

  Codec: H264 - AVC MPEG-4 (part 10) (h264)

  Resolution: 1280 x 720

  Image frequency: 8

  Decoded format: Planar 4: 2:0 YUV

  Type: subtitle

  Codec: Subtitles cardiovascular disease (CVD)

  (I don't like on this subject since there is no audio data)

  News of the computer:

  Windows 7 Pro

  Service Pack 1

  -Dell Intel (r) Xeon CPU E5-2603 v2 1.80 GHz 1.80 GHz

  32 GB OF RAM

  First Pro CC v10.4

  2015.4 release

  Media encode CC 10.4.0.26

  2015.4 release

  The plugin is here: Hikvision USA under DSFilters V6.1.2.2

  Let me know if you have any suggestions. Thank you!

  The plugin is here: Hikvision USA under DSFilters V6.1.2.2

  He said no plugin is supported for the first it just says: WMP.

  WMP is a player's first editor-in-Chief: a world of difference.

  Try and see if you can convert with HandBrake to mp4 with constant framerate.

• HD video files jump in size to the publication in the 13 pre. How to avoid?

  Hello everyone, I'm using the Dutch version of the pre 13. Thus, some names of menu/button will be Dutch. I hope that you will find what they would look like in the English edition.

  I built a little project autour. Video MTS files, downloaded from a camcorder. Video, AVCHD 1920x1080i, 25 fps, approximately 17000 Kbps.

  I made a few simple changes: change the points of entry and exit in fasteners to remove the bad images. There was 1 min 52 sec of video I want to publish it on computer. You select MPEG, there are two options that produce MPEG2 files: "MPEG2, 1920x1080i 25", who need MB (!) 344 and 'Hoge kwaliteit, HDTV 1080i 25 ", who need 210 MB. File MPEG2 times do not play in Windows Media Player, producing its only (video and audio have been verified at the time of publication). What's wrong?

  To be honest, I expected that PrE could suggest me to produce with a codec H264 MPEG4 files. Under the AVCHD, there is the option "MP4 - H264 1920 x 1080p 25 (p)(, non pas moi).» It uses "Bestandstype" H.264 and will produce a file of 439 MB (!). The size does not change when I select the settings are the same as those of the video imported under the "Advanced" button... ». I find it surprising that 1 m 52 takes so much Mo. The original size it takes about 100 MB/min of video. Codec is not optimal?

  If the problem persists, it will be impossible to create a DVD disc or Blu - ray containing an acceptable length of the video.

  I'm looking forward for advice. Thanks in advance.

  Wouter

  wk59

  Of your particular source

  bitrate can be expressed

  17000 kbps (kilobits per second)

  16.6 Mbps (megabits per second)

  2.1 Mbps (megabytes per second)

  If you want to spend time of seconds to minutes for your clip 1 minutes and 52 seconds (112) with this bitrate, you might estimate a size of file with this AVCHD like 126 MB compression.

  If you take 1 minute and 52 seconds timeline export to a file

  Publish + share

  Computer

  MPEG

  with Presets = MPEG2 1920 x 1080i25

  you work with other than AVCHD compression and the default bit rates are higher for the parameters of flow (Minimum 18, target 25 Mbps and Maximum 30 Mbps). Have you tried adjust default bitrate with a bitrate of the original film?

  If you take 1 minute and 52 seconds timeline export to a file

  Publish + share

  Computer

  MPEG

  with Presets = HD TV 1080i25

  work with other than AVCHD compression and the default bit rates are lower than those of MPEG2 1920 x 1080i25 (Minimum 4 Mbps, target 15 and 18.5 Mbps Maximum.) These parameters should give you a closer at the source file size before you customize the bitrate.

  But I don't see anything special about this situation - given a bitrate of the source that is exported by using the export settings baud rate. Are adjust you the bitrate export settings under the Advanced tab of button/video? You take into consideration your choice of video compression and bitrate settings?

  When using Publish + share/computer/MPEG, your video compression will be MPEG2 (with extension of file m2t or mi/gal). If you are looking for video compression H.264, which can be found under publish + share/computer/QuickTime as H.264.mov. Also, check out post + computer part, AVCHD to H.264.mp4 and H.264.m2t. But, find rates under the Advanced button of the preset. You do not have to use the default values for Adobe, but rather your own compromise between the bitrate, the quality and the size of the file on the settings tab advanced video button of the preset.

  Reading the MPEG2.m2t and MPEG2.mpg is discussed in the next post.

  RTA

• File AVI to ORDRO HDV Z35 not accepted

  Hello, I have the camera to ORDRO HDV Z35 digital cinema

  CODEC: H264 - MPEg 4 HVC (Part10) (H264) Decodiertes formula Planar 4: 2:0 YUV

  Audio: WAV, IMA ADPCM Audio (ms)

  I use Windows 8.1

  The player VLC and Windows Media Player can play AVI files without problem.

  But Premiere Pro does not read, it says file unknown or damaged.

  Think it's a Codec issue.

  All the solutions to him?

  H.264 will not work inside an envelope AVI http://forums.adobe.com/thread/854115

  -then use the MOV wrapper if YOUR camera offers this option

  -Says THAT VLC convert in response to #6 http://forums.adobe.com/thread/1172956

• Importation of DVDs for use on the Web

  Hello

  aplogoies if it is "a stupid question", but it's my first foray in the creation.

  A clinet, whom I do a web site gave me a DVD with demos of its products to the vob format. IE the dvd has two files about this one audio an video I think!.

  I downloaded avs video converter and convert vob to AVI and mp4 files

  If I import the mp4 in first they are imported okay, if I import the avi file I get the following error

  file format not supported floor.

  I searched the Forum and opens the file in history with the following results

  .

  I guess I have two questions, the end video will happen to a YouTube channel so I am better off using only the mp4 conversion or should I convert it to AVI. If this last why make this mistake

  Thank you

  Ian

  Just rip the vob on hard drive and import them into first (no need to convert)

  Export with a predefined, Youtube which lies beneath the H.264 format.

  First does not support avi with codec h264.