coding problem

Similar Questions

• coding problems

  I have a file that when I give it a name changes in the size of about 50% smaller than if I give it a different name.  I talked to cs and I was told that it is a coding problem. What should I do

  SaveAs or rename a file only will distort not the page unless you save it in a different folder.  If stored in a new folder, you must also update links to pictures support for CSS, site, JS - files, etc...

  Nancy O.

• The Illustrator SVG effects coding problems

  I feel a REAL coding XML SVG and be reproducible in Illustrator that I expect big problems. Major problem is right now the effect of feColorMatrix. I understand the effect and how the matrix modifies the pixels but problem I have is that when I specify 0.5 as a result of the final output on one of the color channel lines, Illustrator is not interpret 0.5 RGB 127, in other words, 50% the color value. It's more like 0.215 is equivalent to 127 decimal RGB. Here is a code:

  <?xml version="1.0" encoding="UTF-8" standalone="no"?>
  <svg
      xmlns="http://www.w3.org/2000/svg"
      version="1.2"
      viewBox="0 0 576 432"
      width="576"
      height="432"
      baseProfile="tiny"
      id="NicoleLovesSVG">
      <g id="Canvas">
          <rect
              width="576"
              height="432"
              x="0"
              y="0"
              transform="scale(1,1)"
              id="Canvas-Rect1"
              style="fill:#9d8654;fill-rule:evenodd;" />
      </g>
      <defs>
          <filter id="ShadowFilter-Text1" filterUnits="objectBoundingBox" primitiveUnits="userSpaceOnUse" width="200%" height="200%" x="-50%" y="-50%">
              <feColorMatrix type="matrix"  in="SourceAlpha"
                  values="0 0 0 0 .5
                      0 0 0 0 0
                      0 0 0 0 0
                      0 0 0 1 0"/>
              <feOffset dx="24.395183950936" dy="24.395183950936" result="shadow"/>
              <feBlend in="SourceGraphic" in2="shadow" mode="normal"/>
          </filter>
      </defs>
      <g
          id="Text1"
          transform="translate(1.1272727272727,297.27272727273) rotate(0) scale(3.5238813920454546,2.642911044034091)"
          style="fill:#003300;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:15px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;"
          filter="url(#ShadowFilter-Text1)">
              <g
                  id="Text1-Line1"
                  transform="translate(0,0)">
                  <path
                      transform="translate(0,0)"
                      vector-effect="non-scaling-stroke"
                      id="Text1-Line1-Glyph1"
                      d="M 0,0 M 46.4,-98.24 L 46.4,-15.68 C 46.4,-8.96 47.466666666667,-3.7333333333333 49.6,-0 L 30.4,-0 C 32.533333333333,-3.7333333333333 33.6,-8.96 33.6,-15.68 L 33.6,-98.24 L 31.36,-98.24 C 21.653333333333,-98.24 12.106666666667,-96.373333333333 2.72,-92.64 L 8.32,-106.72 L 79.68,-106.72 L 74.56,-92.64 C 68.693333333333,-96.48 59.306666666667,-98.346666666667 46.4,-98.24 z" />
              </g>
      </g>
  </svg>
  

  As you can see, the first filter retrieves the SourceAlpha, which is all black. Then the color matrix that takes and did this on the first line of the matrix:

  (a red x) + (b x green) + (blue x (c) + (d x alpha) + e = exit red final

  Plug in the numbers:

  (0 x 0) + (0 x 0) + (0 x 0) + (0 x 0) + 0.5 = 0.5

  Should be 50% Red! Or RGB 127! I did the math and to Illy, it's more like 0,215 = 127 = 50%?

  This has been answered: http://stackoverflow.com/questions/8214924/illustrator-svg-effects-coding-issues

• Error #1009 coding problems

  Hi, ive been writing code its long about 500 lines and im getting these errors

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  zombie / loop)

  TypeError: Error #2007: hitTestObject parameter must be null.

  at flash.display::DisplayObject/_hitTest()

  at flash.display::DisplayObject/hitTestObject()

  zombie / loop)

  When I debug:

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  zombie / loop () [C:\Users\Tom\Desktop\Packets\Zombie.as:43]

  My class of Zombie Code is:

  [AS]

  package

  {

  import flash.events.Event;

  import flash.display.MovieClip;

  import flash.display.Sprite;

  Zombie/public class extends MovieClip

  {

  private var ZombHP:Number = 10;

  object: main private var;

  public void Zombie()

  {

  addEventListener (Event.ADDED_TO_STAGE, onadd);

  }

  onadd(e:Event) private function

  {

  core = MovieClip (root);

  addEventListener (Event.ENTER_FRAME, loop);

  }

  loop(e:Event) private function

  {

  if (ZombHP == 0)

  {

  / / Zombie death scene;

  this.gotoAndStop (3);

  / / See if dead Zombie scene ends

  if (this. ZombDeath.currentFrame is framesLoaded)

  {

  / / Remove the Zombie scene

  removeChild (this);

  }

  }

  / / if Zombie key character

  if (this.hitTestPoint (core.char.x, core.char.y))

  {

  //Health breaks down

  kernel. HPBar.nextFrame ();

  }

  / / hitTests with weapons

  if (this.hitTestObject (core.char.Char_weapons. Handgun.HShoot.HGBulletRange))

  {

  ZombHP-= 1;

  }

  if (this.hitTestObject (core.char.Char_weapons. AK. Ak_Shoot.BulletRangeAK))

  {

  ZombHP-= 1;

  }

  if (this.hitTestObject (kernel. Char_weapons. Uzi.Uzi_Shoot.UziBulletRange))

  {

  ZombHP-= 3;

  }

  if (this.hitTestObject (kernel. Char_weapons. Shotgun.SG_Shoot.SGBulletRange))

  {

  ZombHP-= 5;

  }

  if (this.hitTestObject (kernel. Char_weapons. Minigun.MG_Shoot.MGBulletRange))

  {

  ZombHP-= 2;

  }

  if (this.hitTestObject (core.char.Char_weapons. Raygun.Rg_shoot. RGBulletRange))

  {

  ZombHP-= 10;

  }

  }

  }

  }

  [AS]

  Please reply as soon as.

  whatever it is null means that there is no Flash.  He has not defined or defined after you try and reference it.

  There are a number of ways that this can happen if you use the code on the timeline.  the only way to avoid that it should create an object on an image and assign an instance name in the properties panel.  Then ONLY you can add more keyframes in the timeline of this object.  If you remove the object of a keyframe and then replace, it will not be the same object, no matter what you add in the properties panel, or anywhere else.

• Slight coding problem

  I am trying to build the first page of a Web site and I have a "gap" appearing on the page. It is located at http://www.members.optusnet.com.au/csteed/Inhypnotherapy/index.html and you can see the color bar to the bottom of the content. Assistance would be appreciated, I know this is something simple, but I can't see IT.

  Thanks, Chris

  G ' Day Chris,.

  You have too many. Just remove one red.

  
  
   

  
     

  I hope this helps.

  Ben

• David Powers Smartlink, coding problem

  Page is here

  http://www.cruzthiele.com/static/workSMARTLINK2.htm

  Click on the image and open a new beautifully centered window BUT

  In IE "cannot find the new page of the child".

  In FF shows the page parent in the child window.

  It would really appreciate someone looking at the code

  I tried everything I have and think to * SIGH *.

  You must apply the behavior of SmartLink, tag surrounding the image and not the image itself. You have this:

  It should be this:

• Shortly after having downloaded a Firefox security update, I started seeing strange problems of coding. Firefox started crashing all the time.

  Crashed happened immediately after the opening, even in Safe Mode. I downloaded the latest version of Firefox, but that did not fix the problem. (Those early coding problems I saw were on 7 bars, etc.) Now I see encoding problems with Safari, which began to regularly crash on me. Need to finish a second thesis soon and that's very bad.

  You can write a check for corrupted fonts and duplicate and other police issues:

  • http://www.thexlab.com/faqs/multipleappsquit.html - help book 2.0 fonts: looking for damaged fonts
  • http://www.CreativeTechs.com/IQ/garbled_fonts_troubleshooting_guide.html

• Methodically, debugging homework 3 part 3 coding

  I am convinced that homework 3, part 2 has been completed and the customer (ECPG - s) ran successfully data display in the putty window.

  If the material and the Raspberry IP configuration is stable. I would like to simplify the troubleshooting steps encoding for reading GPS data, perhaps display the data received in each method and have a map of what it should look like. Are there more references than the "events-data-message-doc' or maybe a part of the video to help with this?

  OR, if a person can offer a suggestion for the not to step in each of the sections of code using "System.out.println", points of rupture or a good system for tracking data through each method (readDataLine, geRawData, getPosition, getVelocity, etc.) is easier to see where the code has problems. To start receiving data, the class AdaFruitGPSUARTSensor must be properly implemented, that close at the end of part 3 and after my coding problem. Perhaps, I placed some features in a fault method. I'm having difficulty to assess that.

  Mike

  I'm not sure what you mean by 'events-data-message-doc' and I don't recall videos specifically on debugging that presenters have used the println command to display data.  However, there are two ways to debug using netbeans.

  First of all, make sure that you have used putty to connect and then the Java ME 8.1 on the IPD has begun and that you have connected your RPi in connection of Device Manager. Nothing will work if you don't do these things first.  You're right, there are two ways to debug.  1. use println.  2. use breakpoints.

  The easiest way is to use println statements.  I use readDataLine as an example.

  Here is my readDataLine method:

  protected String readDataLine() throws IOException {}

  String dataLine = null;

  dataLine = serialBufferedReader.readLine ();

  If (dataLine.startsWith("$")) {}

  return the data row;

  } else {}

  Returns a null value.

  }

  }

  To print the string dataLine, first place your cursor on a line after that the variable data is defined.

  Then type safe (this is a shortcut to the println command).  Don't hit back.  Just type s o u t)

  Then click on the tab key, it develops the shortcut in a full range of valid code.  Your cursor will now be inside a set of quotes.

  Type something like this 'dataLine = "+ data line inside the parens competence.

  Now, your code will look like this:

  dataLine = serialBufferedReader.readLine ();

  System.out.println ("dataLine =" + dataLine);

  If (dataLine.startsWith("$")) {}

  This indicates Java to print the characters ' dataLine = "in the console, then print dataLine.". "  Notice how I put a space before and after the '=' for readability.  You can ignore these spaces if you want.  In fact, you could shorten the whole line and print System.out.println (dataLine); If you don't want to have any explanatory text.

  Now, run the code.  When your code hits this spot dataLine will print on the console.  You can view the console in at least 3 places: 1. The Putty window.  2. in the EmbeddedExternalDevice1 window, click Exit.  3. in the window out into Netbeans.  If you don't see it, click/Window/Output, or press Ctrl and 4 at the same time.  I like the method 3 the best because I can do this in Netbeans without having to open other windows and cluttering up my screen.

  The next method is to use breakpoints.  It's more complicated, but much more powerful.

  To set a breakpoint, see the grey border immediately to the left of your code.  On my Netbeans, this gray area has line in numbers because I said Netbeans to display line numbers (view/show line numbers).  If you have not enabled, the gray area will have nothing in it.  Click in this box to the left of the line you want to add a breakpoint to.  If a red square appears, you have set a breakpoint.

  To activate the breakpoint, you must run your code in debug mode.  If you run the code in the normal Run mode, no breakpoints will activate.  To run code without breakpoints, I click the Green Run button upwards in the toolbar.  Click on project/running, or press F6.  These methods do not enable breakpoints.

  To run in debug mode or click the icon to the immediate right of the Green Run button (it has a picture of a breakpoint and a small green triangle of race), click Debug/Debug project or press Ctrl F5.  Each of these methods should start your project in debug mode.  It runs like it did when you run the project normally, but he's stopping at breakpoints, and it may work a little more slowly because it is now followed for breakpoints.

  Once the breakpoint is reached, the three windows should appear in your code: watches, Variables, breakpoints.  Variables window shows the variables that are in scope at the breakpoint.  If you put a breakpoint on the line after the variable data is defined, you can see the contents of the row of data in the variable window.  Note: If you put a breakpoint on the line of data in row = serialBufferedReader.readLine (); you don't WILL NOT read a value of dataLine because it has not been defined until this statement has been executed.  So move your breakpoint to the next line.

  There is much more to say about debugging.  Here is a link a page describing more information about debugging using NetBeans.

  http://Cobweb.cs.uga.edu/~shoulami/SP2009/cs1301/tutorial/NetBeansDebuggerTutorial/NetBeansDebuggerTutorial.htm

  Answer this, if you have any other questions.

• SVG interactivity: compatibility problem of text

  Hi all

  I have an animation using some SVG interacitve. I used the example of a common edge (http://www.youtube.com/watch?v=4UEB6gaLKuw) and it works well.

  But I have a question about the text encoding:

  I have "spaces" in the text of my layers in the SVG file, but the 'spaces' are replaced by 'underscore' in the animation.

  I guess it's a coding problem, but I have no idea how to solve this problem. Should I look for in the Illustrator's SVG export option? Should I code something in the html file? Is there a solution?

  Thanks for the help!

  Here's the code I used to fix some problems with layer names. You can use 1 or 3 depending on what you need, but your question use number 1 and change the last line accordingly.

  sym.setVariable ("selectedPart", event.target);

  REMOVE UNDERSCORE

  newText var = (event.target.id) .split ("_").join("");

  DELETE NUMBER A DUPLICATE LAYER NAME IF

  var newText2 = (newText).split("1").join("");

  REMOVE UNNECESSARY SPACE

  var newText3 is.split("").join("") (newText2);.

  You can then use this
  SYM. $("selectedPartTxt") (newText2) .html.

• Coding for static form

  fill out questionnaire?

  I've created in Flash CS4 (AS3) of static type form for a Web site that I pursue. The questionnaire is used to determine if a person is sensitive to the abuse of drugs and alcohol with a postive (not likely to develop substance abuse) response or a negative response (likely to develop substance abuse)

  He has answered six questions on the form, which MUST be either Yes or no.

  I created the form with all the buttons and art and it is ready to apply to Dreamweaver but necessary to writing scripts for doing work.

  The six buttons YES receive cb1 instance names, cb3, cb7, cb9 and cb5, cb11

  The six NO button receive names of instance of cb2, cb4, cb6, cb8 cb10

  and cb12.

  When the responses of participants all six questions or whether they will hit a Submit button (with an instance name of submit) who will lead them to a new page web/flash with the appropriate response.

  If the participant meets TWO or more questions with YES and submit a success, they will go to a new page/doc in the website of the negative response.

  If the contestant answers ONE YES and click on submit that they will be directed to a new page/doc in the Web site with a positive response.

  If the participant meets all THE numbers and click on submit that they will be directed to a new page/doc in the site with the same positive response that answer with a YES of answer.

  I guess it's a coding problem very complex. I am a person flash Tango beginner/INTERMEDIATE with novice extreme understanding of coding. I know what stop(); done in AS3 and understand "clickTAG" simple coding etc.

  Would appreciate any help with AS3 coding for this document.

  I used to find coding on forums like these and articles online - but I don't know even where to start looking.

  Thank you

  on the timeline that contains your buttons:

  var yesNum:int = 0;

  var noNum:int = 0;

  submit_btn.addEventListener (MouseEvent.Click, submitF);

  for (var i: int = 1; i<>

  If (1 %2 == 0) {}

  This ["CB" + i] .addEventListener (MouseEvent.Click, noF);

  } else {}

  This ["CB" + i] .addEventListener (MouseEvent.Click, yesF);

  }

  }

  function yesF(e:MouseEvent):void {}

  yesNum ++;

  e.currentTarget.removeEventListener (MouseEvent.CLICK, yesF);

  }

  function yesF(e:MouseEvent):void {}

  noNum ++;

  e.currentTarget.removeEventListener (MouseEvent.CLICK, noF);

  }

  function submitF(e:MouseEvent):void {}

  {if(yesNum+noNum==12)}

  take appropriate action based on yesNum and/or noNum

  } else {}

  error.  all unanswered questions.

  }

  }

• Image on site not displaying on Firefox

  Hello

  I have problems with an image on my website www.sanomag.com.au.

  The image in the left sidebar (green 'all-in-one advertising' ad-box) does not appear on Firefox. It seems in good condition on Google Chrome and Internet Explorer. According to me, what we could do with a coding problem because I checked and the images are not blocked for the site or any site on Firefox.

  Can you please help me?

  Thank you!

  No problem with this image in Firefox.
  
  This image was "ad" in the name, so make sure that you have no ad-blocking software or extensions which have rules that are triggered by such a name.

  • http://www.SANOMAG.com.au/images/advertising-02.jpg

  It is usually best to avoid names that are automatically blocked in extensions such as Adblock Plus popular filter sets.

• Gibberish, loading up on some Web sites

  So, for some time now, some Web sites have been appearing as pretty much gibberish. Just a series of things of brand black diamond-question thoes. I thought it was a problem of encoding, but I couldn't fix it, so I just used chrome for the weird site, I needed. In any case, now it has began to appear in more and more Web sites, and now finally it appears when I try to access my google account, making access to my impossible Email (on firefox). Here's a screenshot.

  I still think that it is a coding problem, but my infernal fiddeling doesn't seem to be changing anything at all.

  Any help would be great. I do not like the idea of switching to Chrome.

  You can check the preferences of network.http. * on the subject: config page and delivery to zero all users "BOLD" network.http set prefs by default via the context menu-> reset.

  • http://KB.mozillazine.org/about:config

  Check at least:

  • Network.http.Accept - encoding: gzip, deflate

• 'error' is not like a sub - VI

  Hi people:

  It's probably more a basis LavView coding problem. I'm having a strange problem where Labview 13.0f2 is not my 'mistake' sub vi as output to continue my bus error string. I have attached the .vi for all who want to take a look and state the obvious for me. Keep in mind, I'm a n00b LavView so be gentle. It is a sub .vi who wrote in data acquisition, and I try to bring to DAQ - mx. Feel free to make any comment about the .vi as a whole.

  Thank you.

  Andrew

  You just right-click on the icon.  You right-click on the part of the connector.  From there on, spending Patterns and the 4x2x2x4 pane is in the bottom row, third from the right.  You will then want to reorganize where your controls and indicators are connected on the side of the connector.  It is recommended that your error is in the lower left corner, and your error is on the lower right corner.  Then on the left, outputs on the left.

• Is there a way to find an evolutionary gap?

  Hello

  I am currently a large amount of data points, recording 1 out of every 1000 points to a spreadsheet and save the last 1000 points to record in a spreadsheet when the program is finished.  I wish I could know the overall variance of all the points (points of data about 36000000, which I'll save only 36000), but I will save all the data points.  Is there a way to close the gap (all points, not just the ones I save)?

  I know I can find the exact average by totalling the continuously and then dividing by the number of points taken.  I also know that if the average remains constant, I can start with a gap, find the sum of squared residuals and add new residual for each data point.  The problem is that the average is changing, so whenever a new data point is added, the residue of all previous points are also changed.

  I'm sorry if this is more a problem of math than a coding problem, but I thought it might be a way of approaching in LabVIEW.

  Thank you

  Broken Arrow says:

  What of the VI Point by Point SD?

  Well, it's exactly what the OP did not want...

  (quote: I would like to be able to know the total of all points variance (data points about 36000000, which I'll save only 36000), but I will save all data point.)  Is there a way to close the gap (all points, not just the ones I save)?)

  However, you pouvez use the standard_deviation_ptbypt to get the overall value without a lot of memory in defining the length of the sample to zeroeffect.

  Of course, my example can be simplified futher as it is attached. (The previous version was a verbatim report of the article). Modify if needed. I also added the ptbypt version. You can look at the code of the ptbypt version, it's quite similar (see the case of "infinite horizon"). Personally, I prefer to use a size = 3 table instead of several scalar shift registers.

• Clean the Surface 3D

  I played with this 3D-graphics and hoped that someone could have a look at this problem.

  Note: I tried the two former 3D graphic methods and new and taken through the forums or google for similar issues - still need to find a solution;

  Link to the chart: (also in attachments)

  http://i.imgur.com/93H6Inx.PNG

  Link to the Code: (also in attachments)

  http://i.imgur.com/xDJESK0.PNG

  The question is therefore, I'll run VI once, and it works as expected.  The second time I run it, the curve has still the 3D surface of the previous race and fair draws on top of it.

  The tables with time/frequency/power values are deleted when the VI starts, and I'm running the graph by a node to erase data.  Even manually by clicking on the graph and it reset to the default value is not clear of the surface.

  It does not erase if I close and reopen the VI.

  It also clears if I make changes to the block diagram.

  Any thoughts?

  Thomas,

  I was put aside with the other projects for a while - finally had time to get back to that.

  I tried rewritten with the 3-d surface chart and 3D ActiveX Surface graph and still has problems - even if I managed to get a semblance of functionality out of it.

  I decided there must be something fundamentally wrong somewhere else and noticed something stupidly simple I'd forgotten - which I exected a posteriori, since 99% of the coding problems are like that.

  I was not properly initialize arrays of Maj I use to build the chart, even when the cancellation of the data correctly, the bays of the shift were always old given undesirable.  Stupid mistake.

  http://i.imgur.com/fAkofnQ.jpg

  ^ This small change corrected, now works like a charm.

  Thanks for the help though - your suggestion at least forced me to rule out any possibility.  I really learned to start looking for small mistakes first.   D