T400 - knuckle Front headphone jack iphone broke into the holder and is stuck in there... Help!

Don't know how or why it broke. So in the beginning it was just dangling near the front of the socket, I tried out with tweasers. That could not, I just pushed him further. Now it is basically on the back of the plug and I can not any sound out of my T400 because it runs there.

Any suggestion would be greatly appreciated pls

Is it possible to get there to disassemble the laptop?

What are my options? I'll try anything!

You can try taking the machine part and pushing it with a needle.

http://download.Lenovo.com/pccbbs/mobiles_pdf/43y6629_04.PDF

Tags: ThinkPad Notebooks

Similar Questions

  • No sound from front headphone jack

    Just installed Creative blaster x - fi titanium sound card in my desktop HP P7 1234.  Everything works fine except no sound from the front headphone jack.  The jacdk worked until I installed the card.  I need the decision-making to use as another line for around the music of the pool.

    Any help will be greatly appreciated

    Thank you

    Jay

    If you install a card its additrional you can only use this smart - card ports on Board will be disabled.
    You need to check if you can connect the ports of the façade to the new card - otherwise you will get a card where it would work.

    Or simply use an audio splitter (Y-cable) to connect a second audio device to the new card.

    C.

  • Front Headphone Jack does not

    I have a Pavilion Media Center a1440n.  I recently updated my OS to Windows 7 and updated the appropriate drivers.

    Everything works OK, except the front headphone jack.  Realtek HD audio recognizes the shoultd headphones connect to the Jack of the façade, but he does not see that the earphones are connected and there is no sound in the headphones.

    Is it an OS problem, or is there a setting I need to change?

    Thanks for the reply.  I tried what you suggested with no luck.

    I also had other problems, so I bit the bullet and bought a new computer.

  • My sim card has slipped the tray and into the phone and is locked how to remove

    Grandson bought a new iPhone and thought that he had to change sim cards.  He removed the sim card and tried to reinsert everything by putting the tray with the card in the phone, SIM slipped off the set and became stuck in the phone.  Any ideas how to remove?

    Take a pair of tweezers and VERY carefully and gently grasp the card and remove it. No doubt, try to avoid the contact pins that are inside the phone and touch the bottom of the SIM card when the card is inserted.

  • Firefox bookmarks bar does not allow me to drag-and - drop Web site icons. I went into the display and click on "bookmarks bar".

    Firefox bookmarks bar does not allow me to drag-and - drop Web site icons. I went into the display and click on "bookmarks bar". bookmarks bar but her but its not allowing me to drag and drop the icon on the toolbar. I tried everything it is supposed to do, but his does not work. his frustration.

    Stef. /. \

    Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible.

    • View > toolbars
    • Right click on empty toolbar space

    Use the toolbar (Customize) to open the Customize and set the toolbar to display items.

    • Make sure the "bookmarks toolbar items" are on the personal bar
    • If "Bookmarks Toolbar items" is not on the bookmarks toolbar, then FRY it in the palette of the toolbar in the window the bookmarks toolbar Customize
    • If the missing elements are in the toolbar palette then drag them from the window, customize the toolbar
    • If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar configuration

    You can check the problems caused by a corrupt localstore.rdf file if the above didn't help.

  • I just spilled some water on my iPhone 6 near the speaker and listener made holes idk if water has penetrated or does it damage my iPhone please help!

    I just spilled some water on my iPhone 6 near the speaker and listener made holes idk if water has penetrated or does it damage my iPhone please help!

    See if there is an indicator of Contact liquid on your iPhone > liquid for iPhone or iPod is not covered by the warranty

  • (Redirected) Power adapter green light turns off when the laptop battery is plugged into the laptop and does not load.

    Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.

    As you have a laptop, better make this laptop in the computer Forum post here:

    http://en.community.Dell.com/support-forums/laptop/default.aspx

    Tip: when you post a message, preferable to always include the computer model.

    Bev.

  • photos of the iPhone are on the side and I can not turn because theres a problem with the property file

    Photos imported from my iphone came on the side and when I turn and try to save, it won't let me save it like that saying "windows Photo Viewer cannot save changes to this picture because there is a problem with the pictures of file properties". What should I do?

    I don't know if the following links answer your question, but
    they may be worth a visit:

    Good luck and * proceed at your own risk *.

    FWIW... There is a very long discussion (several pages) to the
    following link:

    Cannot change the imported iPhone 4S photo
    https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

    More Discussion

    iPhone 4S image properties is not compartible with Windows?
    Editing can be done on the computer due to the error
    "Windows Photo Viewer cannot save changes to this picture.
    because there is a problem with the properties of the image file".
    Any help?
    https://discussions.Apple.com/message/17291884#17291884

    More Discussion:

    We cannot turn a few photos in Windows 7 (but can turn others)
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

    A simple solution is to open the photos in paint or most other
    digital image editor and modify it.

    Some people have reported success using the following free download
    to remove the metadata.

    Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
    http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

    Here's a way to turn...

    Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
    the rotator Lossless JPEG free
    http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

    Free download JPEG Lossless rotating
    http://annystudio.com/software/jpeglosslessrotator/

  • When I open the games online I can't get into the game, and they will write check your firewall

    can you please answer

    When I open the games online I can't get into the game, and they will write chek your firewall

    Original title: network programs network networking Internet Web site Site Web Web Site URL

    can you please answer

    When I open the games online I can't get into the game, and they will write chek your firewall

    Hello

    I'm sorry for the inconvenience, but I should be able to help.
    Internet connection issues are widely available and vary from one case to another. Your question, however it seems that the most likely cause is that your computer's firewall prevents your applications to connect to the internet. You can check this easily by:

    1. go to the Start Page of Windows 'default Page of Windows 8.
    2 mouse hover in the top right of the screen then click on the search"" button.
    3. type in 'Control Panel' after a brief search you will see a button at the top of the page left labled 'Control Panel' click on this button and you go in desktop mode and allow you to navigate in the control panel.
    4 from there, click on the tab labeled "system and security."
    5. then, click on the second option in the list titled "Windows Firewall"
    6. the first thing you want to do is to check if you are on a "private" or "Public network" (a private network is usually the safest and although on this type of network, you are less likely to be vulnerable to attacks, Public network are accessible by anyone and give a greater risk).
    7 the right it will say Private Networks Connected / not connected and below that it will say comments or connected/not connected networks public. Most computer security settings differ based on your type of connection, if you are on a network audience of settings on your computer will be more strict and could prevent your programs connected to the internet. (Say if you are connected to a private network, you can probably exclude this.)
    8. If you are connected to a private network and your programs don't always work correctly in the top left of the window under "Control Panel Home" you want to click on the option "allow an app or feature through Windows Firewall."
    9 a list first your "Internet Capable of programs" quickly browse and find that you are having problems with and take note of the checkboxes next to them. If no box is checked, you will want to allow them to connect. Do this by clicking on the "Edit settings" button located in upper right
    10 you want then allow your program through the firewall, this by simply checking the box next to it. (Note that if the Public network that can leave your computer vulnerable or higher risk)
    11 after doing this click ok, now go back and try to run your program and see if the problem is resolved.
    12. If you cannot find your program, click the "Allow" another app... button and navigate to your programs (usually in the folder C: / drive in the folder programs.) and choose your program and adjust the settings to allow through the firewall.
    13 if this does not solve your problem, and the problem persists, try to go into Internet Explorer, by clicking on the gear in the top right and open Internet Options. Go to the Security tab and check how strict your settings are. You should be able to click on "Reset to Default" to solve this problem, if that's the problem. (Located at the right bottom)
    I hope that this helps if not let me know and I'll give you some suggestions.
    Thanks for your time, I hope this has helped.
    -Ian
  • I tried to download a pdf and convert them into excel, but the data in excellent is always to the image format.  How can I get the pdf data into the columns and rows?

    I tried to download a pdf and convert them into excel, but the data in excellent is always to the image format.  How can I get the pdf data into the columns and rows so that I can do the calculations?

    If you start the https://forums.adobe.com/welcome Forums Index

    You will be able to select a forum for the specific Adobe products you use

    Click on the symbol "arrow down" on the right (where it is said to see all our products and Services) to open the drop-down list and scroll

  • How to import the logo into the clip and display it during the full clip

    Hi all

    I use Adobe Premiere Pro CS4.

    I am now a different DVD project that I've done since the time.

    Now, I'll use these them in a commercial of things if I want to add a logo on the clips to keep my rights... etc.

    Here is the situation:-

    (1) the import of the item in Adobe Premiere Pro CS4.

    (2) import the logo image I want to use.

    (3) right click on the video file and click Insert.

    Now, I want to know how to import the image file into the video so it's being there during the full clip?

    I tried several times to import it, but found that it displays seperatey after or before the clip or in the environment I want to be displayed during the entire film.

    Also, it is great when I posted I want to resize it to be in the upper right of the clamp.

    Thank you very much

    Sorry for the bad English.

    has taken more time than I thought... and it's just basic examples... may be refined more...

    with more time and reflection... .but gives you the basic ideas of... read the caches of combat and transparency... etc...

    -----------

    samples
    white background... .with hide by approach
    becomes transparent... letters, Black opaque, translucent gray

    transparent background
    black and white letters are shown as is with no cache by approach

    transparent background with matte...
    now white letters serve as mask and allow the image through only the white letters

  • ODI can load data into the planning and REPLACE the existing data?

    Hello
    ODI (9.3.1.1) can load data into the planning and REPLACE the existing data?
    Currently of our ODI by "ADD" load to existing data data - so that is I accidentally run the load twice, it would be double planning numbers. I don't know how to do it to REPLACE so that running more than twice has no effect.

    With the help of the essbase adapter you would use a rule of load, in the State of charge, you can set whether to replace or add to existing values. It is not difficult to pass.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • With no headphone jack, how to use the iPhone in my car 7

    Okay, so here's the challenge.  I have a power source and a headphone and not Bluetooth.  It works perfectly with iPhones before 7.  But with 7, it isn't possible to use the same configuration I had for years.  I own my car, and I have no interest in buying a new car just to support a new phone.  And since this will be a problem for the years to come if I stay with Apple, I would like to know what are the solutions are available.

    So, how to use the new iPhone 7 while remaining responsible and using my car speakers?  Dongles Bluetooth that I need to reload, it's probably not.

    Thus, looking for ideas that might have people.  I can't be the only one with this concern.

    It's almost a certainty that a third party adapter will appear quickly. The new Macbook has a single port usb - c and people asked the same question, 'how to load and use USB at the same time." There are today dozens of solutions for the Macbook, and then it will be with the iPhone 7. An adapter with a 3.5 mm jack and a port of loading Lightening would be my guess. Kickstarter entrepreneurs are probably already working on it.

  • Headphone Jack, not to let the two devices at the same time - work Realtek problem - Dell Audio is unusable

    A copy of my post TomsHardware, where no one was trying to help:

    "To begin with, no thread any where online have solved my problem. My problem in the simplest possible terms:

    -J' bought a Razer right headphone, it does not work when it is connected.

    -J' spent the next 4 hours of downloading, re - download, install, uninstall and reinstall the Realtek drivers, because everybody says I had allow a setting or a related subcontractors as struggling separate devices or something, and I do not have the Realtek HD GUI; at least, I don't think so...

    - Then I discovered that Dell has decided to replace GUI from Realtek with "Dell Audio", which had two options, one of them being that it should even display settings or not.

    -J' took a few steps in Dell Community site and spent the Realtek driver with the Microsoft driver, and that got the headset to work.

    -My headset works fine, but the microphone is not yet detected.

    What I have relevance: right Razer headphones + microphone detachable; Dell Inspiron 15 w / only, audio unified; each unique Realtek and Microsoft audio driver compatible with Windows 8.1.

    What I don't have: the Realtek audio Manager.

    What I wish I had not: Audio from Dell.

    Someone please help me on this, because I have just fired over $100 for it, and I intend to use it for professional players and podcasting; no microphone is not cut it.

    Sorry if I look really angry at the moment, but I think we've all been there...

    Thank you. »

    The main issue: there is a definition of Realtek Audio Dell only exists to ban, I need to change that. I need to configure it to allow two different devices to use in the same decision, and Audio Dell replaced Realtek GUI with its own, which is pretty... Pretty useless. The two parameters, as there, one of them is "Show advanced settings", so congratulations to anyone who decided to do this monstrosity.

    EveryNameWasTaken
    Every post that I found online said that the Realtek HD GUI is the way to go

    Since you can't have the DD Realtek Audio Manager in a Dell, one wonders how they determined it was the answer.

    EveryNameWasTaken
    I just need a way to access

    My question is how to get all these other people. I think that probably they were not talking Dell laptops and their solution applies to some other manufacturers products.

    EveryNameWasTaken
    Please provide another way to separate input devices that are entered into the same outlet

    A headset devices are already separated in the properties. A helmet is an input device, microphone, which can be set as the default device in the properties (Control Panel > sound > recording tab > micro). It is for the internal microphone until an external microphone is connected. The other part of the headset, the headset is governed by sounds > playback > speakers. Who controls the speakers until the headphones or external speakers are connected.

    EveryNameWasTaken
    Inspiron 15 3542

    Thank you. I wanted to know because a couple of the Realtek drivers have a problem with the headphones or the part headphones headphones. Headphones are recognized by their impedance detection and I think that some of the drivers have their settings come down a little, or too narrow. None of the Realtek for the Inspiron 3542 versions are known to be bad for me, but if you get audio in the headphones using the native driver but not as the pass of the Realtek driver then I feel that the fault is with the Realtek driver. You can see all the drivers that comes from Dell for your model in the Inspiron 15 3542 html page. There is audio for Win7, 8.1 and 10 pilots. "WB" means 8.1 and 'WT' 10. I think that there are 2 of each. Try the two for any operating system you have. (If you have10 which, in itself, could be the problem - other people have said they have started the headphone problems when they installed 10) You should not try to install an older version of the driver on a newer version. First remove the newest one in the control panel.

    EveryNameWasTaken
    It befuddles me that Dell would give us a different GUI that has so few options

    I don't know if Dell Realtek & made that choice for technical reasons or something. I think that some of the laptops did not have the Realtek Manager when Dell has started using Realtek as a supplier, but that changed. Of course no one is happy to have fewer options, but yours is the first post, I've seen that reported to the mic. Many other posters have been unhappy, because Dell's Audio Manager does not provide a way to separately control the volume of the headset which is a problem because they can be much too strong, but the real Realtek Manager has an option to display ' phones as a separate device from the speakers.

    EveryNameWasTaken
    I did not buy a $100 laptop, I bought the headphones for $100

    I thought that you had purchased a used laptop. Some of the older 15 Inspiron are probably pretty cheap now.

    EveryNameWasTaken
    -A system restore will not change anything

    I run a retrieval system to remove windows or configuration problems, but that's just me.

    EveryNameWasTaken
    decision does not have a headphone and microphone with any device I checked

    If the plug does not work with any headphone it either because of the Realtek driver fails detecting the defective hardware or it. You should report to technical support if you have an extended warranty.

    EveryNameWasTaken
    "and I used an adapter USB jack to try my usual Microsoft LifeChat headset).

    Is an adapter USB jack of the same thing that the USB input audio in my previous screenshot? A usb plug avoids the problems of the Realtek combo decision-making because the USB does not use Realtek hardware or driver from Realtek. Headset LifeChat know either, but if they are a usb headset while they should work. USB audio devices are as separate sound cards - each device contains its own audio codec, even the small usb Jack. If a device usb audio does not work, it has nothing to do with the hardware, driver or Realtek Manager.

    EveryNameWasTaken
    Another laptop, an HP G62 old without a grip combo under Windows 7 Ultimate, could run them all very well

    You me lost there. The headphones you have tried in the Inspiron have a single plug for a headset jack (4 segments - TAKING), that looks like this?

    and you connected to a microphone jack on a laptop with the separate mic Sockets & normal headset?

    EveryNameWasTaken
    each response that I get from either Razer themselves or now these forums was condescending.

    Your two posts today have assumptions that make it difficult to formulate a convincing answer, but I I don't think I'm condescending. I try to avoid the annoyances that we see in so many forums. However, they are your feelings and you have a right to them.

    When I said to forget taking combo, I wasn't brushing off the problem, while recognizing that these mic combo jack issues are difficult, in large part because we can't use the native driver to test the Realtek driver, so we can't easily determine if it is a driver or a hardware problem. It is much simpler to use usb audio, but as I said I don't know what are the special features are required for your purposes of pod casting.

  • My laptop broke into the four seasons "by Vivaldi.

    My laptop broke into four seasons of Vivaldi. He lasted maybe a minute. I could hear a camera click in the middle.

    Can anyone tell me what causes it? I have windows 7! Thanks in advance

    http://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/i-cant-get-rid-of-a-virus-that-plays-random-music/eed76ec8-575e-4AC5-988d-44e9c4430592

Maybe you are looking for

  • divide the internal sample clock (VCXO)

    Hi all I want to divide clock source internal sample of my high-speed 5122 digitizer PXI card. 5122 PXI, 200 MHz internal clcok source example. I want to taste my data at 10 MHz. So I want to divide down the clock of internal sampling by a factor of

  • Reconciliation of analog output NI USB-6210

    Using Labview, I am currently using an NI USB-6210 to produce a signal that a BOP of Kepco 50-2 M feeding programs. Unfortunately, this device NOR produced no analog voltage. Is it possible that I can use the digital output or against the unit OR to

  • PSC1410: Printer print is no longer

    All-in-one HP PSC 1410 (printer, Scanner, copier) I installed Windows 10 about a week ago everything (including the printer) worked perfectly. Yesterday, I had to change the ink cartridges and now, even if the printer is working, it won't print or co

  • call the owner VI several times

    Hi all I try to call the owner VI several times and was not sure if it's possible. I try to call the same VI in a VI with different condition. I have this VI as active with reentrant template (VI_1), and inside the loop, he calls another instance of

  • Cannot open in only two JPEG files.

    I was not aware of this problem until recently, so I can't tell you when it failed.  I went to search for images in the file and now they won't open. I tried in the Gallery of photos, paint and PhotoShop CS2.  I get errors of each of them as written