Similar Questions

• Fill color changing problem after the drawing of the image?

  I use illustrator cc 2014 to draw a jpeg image. After tracing, I want to change the color of the resulting image. The default color after tracing is black but the color of picture fill shows like an exclamation mark and when I change the color of the entire artboard gray towers no matter what color I choose. I know that the document is in CMYK mode. We know what is happening here?

  Read the manual on transparent records, groups and all kinds of hierarchies that Illustrator can create. Then learn how to select things.

  If you want to make this easier, you can also take a look at edit > edit colors > Recolor art.

  Also: read the instructions on how it works. You need to "unlock" black and white to recolor.

• I use the color picker to select a background color, then try to create a new document using this background color. The appearance of the color changing at this time. It is a new problem. I have successfully used the procedure several times in the p

  My background color changes when I try to apply it. I put the color using the color picker. Then I try to create a new document with the same background color. But that change of a very different color. What I am doing wrong? I've used the previous procedure, several times, without this problem.

  The new document has a different color profile. Make sure that they are the same.

  The same result of RGB numbers in different colors in different color spaces. Or in other words, the color space defines the specific color produced by a certain set of numbers.

• HP Deskjet 3050 tri color cartridge problem

  I bought genuine HP ink cartridges to replace those I used quickly to the top. That black worked fine, but when I later put the tri color in the 'tri color cartridge problem' message came, and when I tried to print it stated that he was "damaged or did not. I tried to re-insertion and carefully clean the copper part without touching where the ink out. I don't really know what else to try, if it's just a faulty cartridge is there a way I can get a refund or a free replacement because it was pretty expensive? Thank you.

  Hi dsavz,

  I hope you were able to print correctly after changing the cartridge.

  Usually they could be exchanged for another cartridge in case of warranty.

  You can try to get back to the store to see if they'll exchange it for you.

  Because it was outdated at the time of purchase.  I would like to give it a try.

  Good day!

• Background color changes when you save a theme

  Just did a new install of Windows 7 Home Premium and has found that, when I save a theme, the background color changes from black (what it was worth) to white. Another thing to note is that when I save the generic theme "Custom Theme" (meaning an unsaved theme) remains, and the background color in the registered theme is changed and does not change when I click on the "custom theme". This is a new installation, so the only software that has been installed is video drivers, network cards drivers, the drivers of the antivirus and sounds. I've used the System File Checker, and he found no problem.

  Hello

  I recommend that you follow the steps from the link below and check if it helps.

  Create a theme

  http://Windows.Microsoft.com/en-us/Windows7/create-a-theme

  Hope this information helps.

• Color changes during the recording of the PSD to JPEG

  Hi all

  When I export the image below of psd to jpeg color changes.

  The rose becomes Purple!

  

  Any help would be appreciated

  Just to be absolutely clear on this point - the problem here is that the file is in ProPhoto RGB.

  Windows 'Photos' isn't the color management and cannot represent a ProPhoto file correctly. No more than any other application without color management.

  Convert sRGB. It is the right answer to your question (which is the error of the very common beginner, BTW).

  In Photoshop, go to Edition > convert to profile > sRGB IEC61966 - 2.1.

  If you're Using "export as" or "Save for Web", just check the box convert to sRGB.

• Colors changing when you export files HAVE in InDesign

  Hello

  Since the upgrade of CS6 CC last year, I think my profiles color or something are put in place bad between CS programs. When I'm working on a file in Illustrator (RGB) and then place it in indesign, as soon as I export the PDF the colors change. For example, a series of gray tones will be released as blue and bright orange. I'm not clued up with the settings of all programs and the inner workings, but I've never had this problem before, I've never had to change all the color settings, so think, need a new default setting I don't know.

  I understand there are a many settings that could do that. I export the PDF RGB file too, but I can't see a likely switch to CMYK. Is anyway to reset all the settings back by default so that I can at least try and get the settings I usually use with CS6.

  Don't know what to do... any advice would be much appreciated! Thanks in advance

  Your Illustrator color settings is a problem. Choose 2 North America prepress of the parameters, which will assign sRGB to new documents and allow you to assign a profile to the existing docs. You can also consider to synchronize all your Adobe applications through the bridge Edit > color settings.

  As test try to synchronize your color for North American prepress settings, create a new document, place the file I and export with the output parameters in my first post.

• color change

  Now and then my color space seems to change on its own, and I can't figure out how to recover from the previous color space.

  The last time that happened, I was 'save for web' and that he was trying different settings of sRGB checked and unchecked. This might have caused the problem, but I do not know why because it is not the color of the recorded image which is at issue. It is the color space of the PSD file that has changed somewhat. The change is that the colours are duller and seem more washed out.

  I know that this has happened when I was not "save for the web." It seemed to me that I was trying to copy or paste or by using a different combination of keys when all of a sudden all the colors changed and I could not get back them. Cancel or cancel using the history does nothing to recover the original colors.

  It drives me crazy. I just spent an amazing amount of time - week (Yes, weeks) in fact - perfecting of colors for a site color scheme complex and out of nowhere my colors are completely foires. So I understand what happened and get back my original colors.

  I read in the forum about the possibility of having changed color settings; so I saved the file under a new name and tried other color settings, but that has not changed a thing. And if I look at the other files based on the file that has messed up (but which have original colors), color in both files settings alike. I also watched test and test colors and saw that the settings are the same as in the other case where the colors are not screwed up.

  Any help will be greatly appreciated.

  Thanks for the tips. But I has not changed anything in the color settings except in the window of the Web. That's when I left the save for web I noticed that all my colors had changed. But then again, this happened with other files and seemed to have occurred after use of key combinations such as cut and paste. I must have clicked the wrong key. But even when I closed the file without saving changes and then reopened, he still had the washed out colors. So SOMETHING changed, I just can't understand what this thing.

  ************************

  FOUND ANSWER

  It's embarrassing, but in this case, I found out something that I had moved into my open file was applied curves that touched all colors because it was near the top of the layers. I guess I didn't notice because I was zoomed in on an element. After I saved for the Web and closed the window, I noticed the color changes. In this case, it was an easy solution. But what happened before and I know it wasn't because of the curves or similar settings. Something happened which washed out/desaturated colours. I'll figure that one another day.

  But thanks to all who responded. At least I learned a few things

• The objects will not retain any color defined when the surrounding objects have their color changed

  Just Illustrator CC 19.0.0 was downloaded to me. When I place a line and then set its color, close objects can also have their color changed. This includes the items in the file of until I added the line, not on the same map-art objects. It is not universal, nor is it compatible. Objects already in the file are perhaps there for months, but a change is close will change their.

  The Illustrator files can still be an earlier version, and there were a number of illustrations that had black lines and text to white turned a few months back. As these illustrations are for a book, being unable to guarantee that the colors will stay together long enough to complete the illustration and export it tends to make unusable Illustrator for tasks of editions. I hope that InDesign and Photoshop do not have the same questions!

  nwjh,

  You must update to 19.1 (or 19.1.1 for Windows) or 19.2 (lattethe has some problems, then you can start with the former).

  If 19.1 (or 19.2) does not appear, disconnect and then reconnect the creative cloud application. After that, the 19.1 update must be visible in the creative application of Cloud.

• Colors change when the downloaded on Youtube (desaturated)

  I found an old discussion about the same question, but it was not an answer.

  My videos colors change when I upload them on Youtube. Colors are desaturated roughly. I can solve the problem of really saturated video rendering, but y at - it another way to avoid the colors to change?

  I use first cs6 and Windows pro. I used the h.264 settings, but I think that I had this same problem with other parameters too (but not sure). Should I try with other rendering parameters or wrong my creation parameters?

  Thank you!

  Problem solved! Somehow, the problem was my internet browser, Google Chrome. With other browsers, I don't have the problem of color. And after you reinstall chrome it works also very well with Chrome.

• Font color changes when downloaded

  Created a new site. seems perfect locally in the browser. During the site build DW "closed unexpectedly. After uploaded to the server of my ISP and read in the browser, certain colors of fonts has changed. I deleted and published to the server several times... same results. I posted another copy of the site... same thing... change of font color.

  I tried to download with FileZilla and had the same problem of font color change.

  My system: version 10.6.8 DW CS5, FireFox, Mac.

  How can I fix?

  Thank you

  Brown text, 'Topic Spangler and son', should be red.

  Nope, it's good Brown, since the rule for #content h2 in tan.css replaces the same rule in styles.css (the link to tan.css occurs later in the code than that of styles.css). Same reason for the

  tag. Remember the rule of the greater specificity in the CSS!

• Help with unexpected photo color changes when loading

  Hello

  I have learned things for a few years and doing pretty good to the mounting

  photos like portraits.

  Recently edited portrait high key, when I compared the RAW CR2 file in flt along the side of the photos

  converted to psd Adobe, colors where change after the opening and saving to the psd format.

  The thing is that I did no changes.  I just open the raw file, then click Open edit thought go in ele.

  Once it opens as a psd, the colors have changed.

  Camera is set to Adobe RGB.  ELE set to manage colors for printing.

  Is this normal, or something I'm doing or not doing.

  Suggestions and recommendations requested.

  Txz.

  Will be

  I understand that you compare side by side on-screen:

  -l'image in the ACR dialog, without any changes

  -l' new image observed after opening in the editor and saved as psd and reopened in order to be able to compare side by side.

  I agree that you should not see any significant color change.

  Notes about your settings:

  -Camera set to Adobe RGB: good for parameter ignored with raw files, JPEG files (PSE, the choice between sRGB or aRGB ACR depends on the second parameter in the Editor: always optimize for printing). Are not relevant to your problem.

  -Always optimize for printing: refers to the raw data will be converted to aRGB for printing and shown according to your screen. This is the right setting, if you want to print in ARGB.

  So, there's nothing wrong with your settings.

  Y at - it a bad screen color profile saved on your computer? Which could happen with other software or screen attempt calibration tools...

  I can't help much in this situation, but it might be useful you have described the color differences s two views. For better visibility compare colors, beware of the surrounding parts of images: If you're on a light background (ACR) and the other in a dark (editor), you see exactly the same colors.

• Lightroom 3 and CS5 color change when recording to JPEG

  Desperately need help on this one...

  In a nutshell if I use lightroom 3 only and print the images printed images are exactly the same on the screen - so I guess the calbration of the screen is correct.

  If I use lightroom 3 and export to CS5 to continue to make adjustments more when I save the image in jpeg, it seems to have saved well. However if you then maximize the photo in full-screen colors change - radically. Basically, they look aweful. They become quite dull and lose it saturation settings (which were made originally in Lightroom). They print this much too.

  It drives me crazy. I don't think that it has nothing to do with the calibration because it is OK when just using LR3.

  I played with it quite a bit to try to find a solution and have found that if I export for CS5 and Lightroom makes no changes to the photos but just save - she always changes the colors

  Sorry - if it makes a difference... may not, but I have not exported from lightroom for CS5.

  Everything I do is select the right click, click on edit in the > Adobe Photoshop CS5.1...

  Then in CS5 it opens and appears exactly the same as in LR

  From there, I click on file > save under > Jpeg formats and there is an another labeled checked - ICC profile: Prophoto RGB (not really sure what it is and there is no other options to change)

  I tried to show a difference in color by joining the photo.

  Photo right is edited in Lightroom. These colors are what you see when it is maximized on screen and the colors print correctly too. This photo has been open and then in CS5 (photo left) (with LR adjustments) and saved as jpeg and you can see how to change the colors. But you do not see the change unless the screen is completely optimized - and she that prints a lot too.

  I don't know what to do someone had similar problems?

  

  Yes.  Had something similar last night, but with LR 4.1. I suspect that we each have a color profile mismatch, although I had no time to solve my problem yet.

  My first thought is that the native LR color space is Prophoto default, but PhotoShop must have its 'working color space' specified by the user.  Unless Prophoto is specified in PS, there will be differences in color on a Prophoto image scale (sensitivity) of color-travel will vary from one image to the opening image.

  To change the workspace in PS, pull down the Edit menu and select "color settings".

  Don't forget to check the box to inform you and ask how you want to handle the inadequacy of the color profile.

  As the previous poster said, prophoto is a bad choice for the use of the web.  probbaly the most commonly used color space sRGB is relatively low

  Good luck.

  Jerry

• drop-down button: menu question text color change

  Hi guys,.

  I made a menu flash; four buttons each with a roll on the menu drop down.

  I am able to change the color of the buttons of reversal, but I cannt figure out how to change the color of the text within a button, on turnover.

  Here's what I mean: under the portfolio, the text color changes from black to white on each button.

  Can someone explain?... Please?

  create a button.  in the high setting add text static with what ever the properties you want.  in the framework add static text with different properties.  Repeat the test.  any problem?

• Strange color fill problem

  I'm having a strange problem in my version of Fireworks MX 2004. When I try to color fill a selected area of an existing image and I chose a specific web-safe color, filled it with a completely different color. For example, I am filling my bitmap with a green color (#666600), but it is filled with a blue color (330066 #). If I select another color in green, the color to another color changes. This problem occurs with the color fill tools... Paint bucket, Brush tool, pencil, etc.
  
  I have no idea why this is happening, so if anyone can help me, it would be greatly appreciated. Thank you.

  I found a work around for this problem, and I thought that after she. I saved the image to gif, then selected and filled color area. It has worked well. I guess it was something to do with her being a bitmap image. In any case, it's all good. Thanks anyway.