Similar Questions

• Colors change when the downloaded on Youtube (desaturated)

  I found an old discussion about the same question, but it was not an answer.

  My videos colors change when I upload them on Youtube. Colors are desaturated roughly. I can solve the problem of really saturated video rendering, but y at - it another way to avoid the colors to change?

  I use first cs6 and Windows pro. I used the h.264 settings, but I think that I had this same problem with other parameters too (but not sure). Should I try with other rendering parameters or wrong my creation parameters?

  Thank you!

  Problem solved! Somehow, the problem was my internet browser, Google Chrome. With other browsers, I don't have the problem of color. And after you reinstall chrome it works also very well with Chrome.

• Class derived from LabelField with custom font color, but when focus not only

  Hello

  I have some problems with the LabelField-derived class. I want it has customized color background and police, but only when it does not have focus.

  I tried to do the following:

  protected void paint(Graphics g) {
      if (isFocus()) {
          super.paint(g);
      }
      else {
          final int bgColor = g.getBackgroundColor();
          final int fgColor = g.getColor();
  
          g.setBackgroundColor(backgroundColor);  // from member
          g.setColor(fontColor);  // from member
  
          super.paint(g);
  
          g.setColor(fgColor);
          g.setBackgroundColor(bgColor);
      }
  }
  

  but the final effect is that this field has the custom until the first focus/unfocus font color. When I do not check the isFocus(), police have custom color when the field has focus too.

  Similar do in drawFocus (Graphics g, boolean on) does not solve the problem either.

  I target BB > = 4.6.0.

  Do you know how to do properly without calls drawText custom?

  Kind regards

  Piotr

  What happens if you replace

  If (isFocus())

  with

  If (g.isDrawingStyleSet (Graphics.DRAWSTYLE_FOCUS))

  and (maybe - I'm totally guessing here) substitute drawFocus doing nothing?

  BlackBerry GUI has many peculiarities, so you never know what path is right.

  A word of caution: most likely, you will have also to invalidate() field when it changes its "focused" State Don't do this in onFocus() / onUnfocus()! Those (especially the onUnfocus()) are not always correctly called (BB frame problem). Make your field implement FocusChangeListener and make these invalidations in the method focusChanged() (using setFocusListener (this) somewhere in the constructor).

• Theme font size changer, I downloaded but it won't install

  I use Thunderbird on a laptop running Windows 7. I want to increase the size of the text in the Inbox and other folders. I downloaded the theme font size changer add to my desktop but I don't get an option to install in Thunderbird. Can you help me?

  1. You open Thunderbird
  2. Press Alt or F10 to see the menu bar, then Tools > > modules
  3. Click Extensions, in the top right of the screen you can see a gear wheel, click on it and select install module file...
  4. Then select the xpi file you download, then install it just

• Background color changes when you save a theme

  Just did a new install of Windows 7 Home Premium and has found that, when I save a theme, the background color changes from black (what it was worth) to white. Another thing to note is that when I save the generic theme "Custom Theme" (meaning an unsaved theme) remains, and the background color in the registered theme is changed and does not change when I click on the "custom theme". This is a new installation, so the only software that has been installed is video drivers, network cards drivers, the drivers of the antivirus and sounds. I've used the System File Checker, and he found no problem.

  Hello

  I recommend that you follow the steps from the link below and check if it helps.

  Create a theme

  http://Windows.Microsoft.com/en-us/Windows7/create-a-theme

  Hope this information helps.

• Colors changing when you export files HAVE in InDesign

  Hello

  Since the upgrade of CS6 CC last year, I think my profiles color or something are put in place bad between CS programs. When I'm working on a file in Illustrator (RGB) and then place it in indesign, as soon as I export the PDF the colors change. For example, a series of gray tones will be released as blue and bright orange. I'm not clued up with the settings of all programs and the inner workings, but I've never had this problem before, I've never had to change all the color settings, so think, need a new default setting I don't know.

  I understand there are a many settings that could do that. I export the PDF RGB file too, but I can't see a likely switch to CMYK. Is anyway to reset all the settings back by default so that I can at least try and get the settings I usually use with CS6.

  Don't know what to do... any advice would be much appreciated! Thanks in advance

  Your Illustrator color settings is a problem. Choose 2 North America prepress of the parameters, which will assign sRGB to new documents and allow you to assign a profile to the existing docs. You can also consider to synchronize all your Adobe applications through the bridge Edit > color settings.

  As test try to synchronize your color for North American prepress settings, create a new document, place the file I and export with the output parameters in my first post.

• You can control changes when downloading?

  I would like to be able to control the changes on the site when downloading via FTP and not business catalyst.  Apparently, the feature is available on BusinessCatalyst, but not a 3rd party server.  What is happening is that if I load the website of different machines, home and work, while all the progress and the files downloaded to work have erased if I download the site of the House.

  A feature that allows you to keep the work done and just add new files would help my productivity a lot.  I have remotely to the office to work on site.

  Thank you for this comment. We changed the behavior for the next major release as Muse does not remove a file from the server resource just because the link to the download file is broken in the active panel when the upload/publish. The file will be left on the server until it is explicitly removed from the active panel (by selecting and clicking on the trash can icon).

  Until this change is available, the only solution is to add a link to download all assets in the active panel before online or editing. This means that any method that you use to move your project between your work and your home computer must include all related components files (or at least those who have the arrow "upload" next to them in the Panel active and all files .oam of edge animate).

  The best way to achieve this would be to put all these files in a folder in the same location as your .muse file. If you move a .muse file and a folder in the same location between machines, Muse will be automatically re - link files. However, if the linked files are not in a folder that is located in the same location as the file of Muse, you have to manually re - link files in the components Panel (since Muse won't be able to find them).

• The font is changed when I look in the preview

  Hello together

  Does anyone know why the font is changed? In the muse program it looks good, but when I look in the preview, it looks terrible, look at the pictures below:

  Police how it looks in the Muse:

  

  Police how it looks in the preview of the homepage:

  

  Hi Julia,

  You must check the code in the HTML embed boxes you may have on the pages.

  - Abhishek Maurya

• Help with unexpected photo color changes when loading

  Hello

  I have learned things for a few years and doing pretty good to the mounting

  photos like portraits.

  Recently edited portrait high key, when I compared the RAW CR2 file in flt along the side of the photos

  converted to psd Adobe, colors where change after the opening and saving to the psd format.

  The thing is that I did no changes.  I just open the raw file, then click Open edit thought go in ele.

  Once it opens as a psd, the colors have changed.

  Camera is set to Adobe RGB.  ELE set to manage colors for printing.

  Is this normal, or something I'm doing or not doing.

  Suggestions and recommendations requested.

  Txz.

  Will be

  I understand that you compare side by side on-screen:

  -l'image in the ACR dialog, without any changes

  -l' new image observed after opening in the editor and saved as psd and reopened in order to be able to compare side by side.

  I agree that you should not see any significant color change.

  Notes about your settings:

  -Camera set to Adobe RGB: good for parameter ignored with raw files, JPEG files (PSE, the choice between sRGB or aRGB ACR depends on the second parameter in the Editor: always optimize for printing). Are not relevant to your problem.

  -Always optimize for printing: refers to the raw data will be converted to aRGB for printing and shown according to your screen. This is the right setting, if you want to print in ARGB.

  So, there's nothing wrong with your settings.

  Y at - it a bad screen color profile saved on your computer? Which could happen with other software or screen attempt calibration tools...

  I can't help much in this situation, but it might be useful you have described the color differences s two views. For better visibility compare colors, beware of the surrounding parts of images: If you're on a light background (ACR) and the other in a dark (editor), you see exactly the same colors.

• Lightroom 3 and CS5 color change when recording to JPEG

  Desperately need help on this one...

  In a nutshell if I use lightroom 3 only and print the images printed images are exactly the same on the screen - so I guess the calbration of the screen is correct.

  If I use lightroom 3 and export to CS5 to continue to make adjustments more when I save the image in jpeg, it seems to have saved well. However if you then maximize the photo in full-screen colors change - radically. Basically, they look aweful. They become quite dull and lose it saturation settings (which were made originally in Lightroom). They print this much too.

  It drives me crazy. I don't think that it has nothing to do with the calibration because it is OK when just using LR3.

  I played with it quite a bit to try to find a solution and have found that if I export for CS5 and Lightroom makes no changes to the photos but just save - she always changes the colors

  Sorry - if it makes a difference... may not, but I have not exported from lightroom for CS5.

  Everything I do is select the right click, click on edit in the > Adobe Photoshop CS5.1...

  Then in CS5 it opens and appears exactly the same as in LR

  From there, I click on file > save under > Jpeg formats and there is an another labeled checked - ICC profile: Prophoto RGB (not really sure what it is and there is no other options to change)

  I tried to show a difference in color by joining the photo.

  Photo right is edited in Lightroom. These colors are what you see when it is maximized on screen and the colors print correctly too. This photo has been open and then in CS5 (photo left) (with LR adjustments) and saved as jpeg and you can see how to change the colors. But you do not see the change unless the screen is completely optimized - and she that prints a lot too.

  I don't know what to do someone had similar problems?

  

  Yes.  Had something similar last night, but with LR 4.1. I suspect that we each have a color profile mismatch, although I had no time to solve my problem yet.

  My first thought is that the native LR color space is Prophoto default, but PhotoShop must have its 'working color space' specified by the user.  Unless Prophoto is specified in PS, there will be differences in color on a Prophoto image scale (sensitivity) of color-travel will vary from one image to the opening image.

  To change the workspace in PS, pull down the Edit menu and select "color settings".

  Don't forget to check the box to inform you and ask how you want to handle the inadequacy of the color profile.

  As the previous poster said, prophoto is a bad choice for the use of the web.  probbaly the most commonly used color space sRGB is relatively low

  Good luck.

  Jerry

• How to keep link text fonts to change when it is associated with an object?

  Greetings.  Using Dreamweaver cs5 and would like help with a simple problem.

  I am discovered late text flash broke and if I change links in html format.  The problem is that when I connect text to an object, another web page, the police link the two changes of fonts and colors (blue).  I suspect it's maybe because I have an attached css style sheet.  I guess that means that I have to change the properties of the link of the page through the page properties, which I believe is supposed to replace the css stylesheet.  Appears not to be the case, I applied the changes and change of police remains.  What I am doing wrong?  Thanks for your help.

  I think I get the question now. The links are intended to be grey, good, not blue?

  In this case, you have all these styles in the linked stylesheet "subpages.css" that affect the links.

  a: link {color: #0033CC; make-weight: normal; do-family: Verdana, Arial, Helvetica, without serif; do-size: 1em; text-decoration: none}
  a: visited {}
  color: #993366;
  text-decoration: none;
  do-family: Verdana, Arial, Helvetica, without serif.
  do-size: 1em;
  make-weight: bold
  }
  a: hover {make-weight: bold; color: #000000; text-decoration: none; do-family: Verdana, Arial, Helvetica, without serif; do-size: 1em}
  a: active {}
  color: #FF3300;
  text-decoration: none;
  do-family: Verdana, Arial, Helvetica, without serif.
  do-size: 1em;
  make-weight: bold
  }

• calendar legend font color changes

  Hello
  
  Is - it normal that when I option legend and nothing to do but change the color of the font, the calendar of the legend changes?
  
  Can I do to stop this?
  
  Gail

  Gail,
  You can click on the Options menu (top of screen) and uncheck the calculate caption Timing

• Why are my page and font-size changes when I go to games on fb

  For the last few weeks, when I access games FB, my fonts and page size change and make unusable games. I can load the page, but cannot play the game because the entire screen will not be can not show.

  Reset the page zoom on pages that cause problems: view > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)

  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• How to avoid color changes when I copy and paste between projects?

  Change colors when I copy/paste the logo between open projects, as well in RGB - how to avoid that?

  Other users have solved the problem by clicking on the color chart, select tones and choose "use Lab values... ", but that doesn't change anything for me.

  So it is somehow necessary to export the corresponding shades as well as the logo - and if so, how do I that?

  OK sorry, I was an absolute fool:

  I assumed I was in RGB mode in the receiver project, because the samples were in RGB. But indeed, the project itself has been in CMYK, therefore all the colors of imported logos looked like they were mixed with milk or something...

  Sorry for wasting your time.

• Button color change when the user clicks on

  I am a new user of Captivate 9 (no experience Captivate). I have a project with buttons to trigger changes multistate and navigate between slides. In most cases, the buttons change to a red/pink color when clicked. How can I control the style/color of a button when you click it to prevent this? I have the same result with an overview of the project and the published file. Thank you!

  Check the object for the buttons styles (you don't say what kind of button that you use) in the Style of the object (to be found in the preferences) Manager:

  

  Look for the button type you use (the screenshot is for the default Quiz button, you see there is also a button to default text style, and style to the other type of buttons, all forms have both possible States because they can be used as buttons). Expand the style (by using the triangle) and watch the rollover State. You can change this State, in a low State as well. It's not clear your question if you speak the turnaround or the Down State. It is the States integrated for the buttons. The color you see in the States depends on the theme you use in your project. Each theme has a theme color palette.

  It is normal that a button has these States, why would you want to have the same status for the three: normal, rollover, down? I have published a few articles to CP9, where you will see different types of States of the buttons, here are two links:

  Play with Captivate 9 - Captivate blog

  1 share = 5 buttons toggle - Captivate blog