Color on a part of the graph is shaded - HP PhotoSmart 8250

Similar Questions

• Extraction of a part of the graph

  I need to extract a part of the graph.

  I know the start and end point in the x-axis and I need to know the values of the y-axis.

  I used express VI 'extract a portion of the signal' but I don't get the values correctly.

  There is a picture with this, in which the part in the red zone is the part that I have to extract.

  Use get subset of waveform

• delete the part of the graph

  Hi all

  I'm using LabVIEW 8.0 and I want to do is to remove a part of a chart by selecting the part to remove from the graphical indicator itself when the program is running... Can someone help me establish the property node in this... or other alternatives...

  Kind regards

  Nitzy...

  You can use the sliders to select the area you want to remove. Then get the coordinates and pet food to a deletion of table and re draw the chart.

• Display problems of color in some parts of the images

  Hello

  I use Lightroom (Current Version 6.5.1) for awhile now, but a few days ago from the colors in my photos started to get weird in some areas of the image. This effect doesn't ' affect all of them. Some are OK.  I tried closing using the graphics processor and restart, but that did not help. Last software update have also an effect.

  Here is an example:

  

  Anyone have any idea how to solve this problem?

  Thank you!

  DC

  Your photo has been damaged due to a hardware malfunction. It could be the card of the camera, card reader/cable USB/USB port, hard drive or memory.

  You will need to run some diagnostic tests to determine the bad component. Try to import photos for different material aid. If possible, bring on a completely different computer.

• Change the color of a part of the image

  CS4 4.2.1

  I want to change the color of a small circular area of the image (more precisely, a mic windguard) from white to a less intrusive darker color.  The movements of the area a bit during shooting, but not too much.    How?

  Tim,

  I'm happy to hear to remove. Who will be the best.

  Discover Track Matte Keying, because it can be very useful for all sorts of things, follow-up of blurs (think license plates and faces), to soften skin tones, to the addition of "cupcakes" to a microphone...

  Sorry for the Internet connection. I was worried that we had been so far in left field, who fled from you.

  Good luck

  Hunt

• Why do I only a part of the graph of the wave even if I added the whole wave using the shift register?

  It seems only to read 200 samples and then stop. Shouldn't get a chart to continuous wave after using the shift over a time register loop?

  You must remove VI begin to break out of the loop...
  You can not 'start' a task that is already running...

  You also remove the VI start completely from your code... If you do not use start VI, a measurement task starts automatically when executing the DAQmx reading VI.

  

  Find the attached VI.

• Save for web cut the lower part of the graph

  Hello

  I have a picture and when I use the 'Save for Web' feature (to save in JPG or GIF), I find the file that results has a little bit to cut down.

  Example: if my work is a circle, the JPG/gif the background of the circle is a little flat.

  Does anyone else know this?

  Phill,

  It looks like half of a stroke. The plan of work/culture area/crop must be set to frame the entire work.

  It is preferable to ensure that work (together) fits into the whole points/pixels, which may appear in the palette/Panel of transformation.

• Part of the wave in different colors

  Hello world

  Hope everyone is doing well. I have a little problem, I detect the valleies and the crests of the waves, I want the portion which is top or Valley to be in a different color so that the user can clearly see them.

  I use waveform graph. I enclose a photo, in that I circled the part I want to be a different color.

  can anyone help?

  RGS

  Omar

  The answer has been given above.  Here he photo and VI form (version 8.6.1), alternately colored cycles of a sinusoid.

  

  This method has the disadvantage of requiring a full set of data for each color you want to trace.  Alternatively, you can break your waveform in different pieces and ground to them as separate parcels, making sure that you set the timestamps correctly.  To do this, you will need to set the chart so that it uses the timestamps.  Click with the right button on the plot of the graph area and uncheck Ignore Time Stamp.  This will put your x-axis in times of formatting.  Click with the right button on the x axis, and then select formatting....  Choose the desired formatting, and you should be good.

• How can I change the color of line in a line graph?

  I used Illustrator to create a line graph. (Not my option you want because I normally import from R and then edit, but the manual wanted to show that you can create graphic and edit them in Illustrator)

  In any case, I did all the editing, except that I can't change the color of the line. My job requires me to match the example of manual and the manual does not provide any instructions on how to do it. I did pretty much any method I can think and the rest always gray line. I'm almost ready to give up everything and lose the points, but something as simple as the color cannot be that hard, right? Right?

  You need spend the focus from filling in the race or the color Panel, or by using the shortcut SHIFT - X. You can use Select > same > Fill and stroke to select all parts of the line and then a Cmd (Ctrl)-J to connect all the parts.

• Change the color of the graph by programming

  HIII everybody,

  I have to draw 12 plots in a waveform graph. I chose the colors in the legend of land for each parcel. But I don't want to display graph 12 at a time. I have as many checkboxes for selection as graphical user settings of the parameter to which want to see. I did what his works well.

  But there is a problem in the color of the graph, if I select 12 parameters at a time, then it displays with the same color I selected on the legend of the plot. But if I choose to less than 12 parameters labview assign colors in series without distinction of color affected. I have attached the VI please help me with this.

  Thank you best regards &,.

  Manisha

  Your problem isn't that you have changed the colors on the chart, it's that you have change the label.  Actually, you have restructured your table in its entirety.

  Why don't you use the Visible field? property to determine what is visible.  Now you're talking almost no code.

• How to change the plot point of the graph XY color programmatically fill?

  Hello everyone,

  I want to make a graph for my project. This graph in x axis date and there is the value. I made this graph XY.

  Now I want two conditions

  One is to draw the average value of the total value. Then traced the fill point color will change according to the average value. For example, my data values between 286 to 295 (any value present in the meantime) my average value is 290,6. So over 290,6 fills point color is GREEN and below the average value is RED. It is in fact I want. I did draw my data and also the average value. But I tried to change color, I couldn't. So please answer me someone. How can I do this task?

  Thanks in advance

  Joel M

  India

  I've attached real output and the power required

  All points of a field must have the same color.  What you can do is create a 3rd no line and red dots.  You can create a trace that contains all of the 'bad' XY pairs and intrigues.  Make sure that your parcel number is such that the red dots to draw on top of the green dots

• Table of standard color for the graph of the intensity

  Hi all

  I am trying to change the color table of a graph of intensity of some tables in color standard, such as 'rainbow', 'gray', 'seismic', 'waves of lava","hot metal","purple haze", etc.. I can't find not "Rainbow" and "grey" somewhere for the examples, but not others. I tried to generate these color tables myself using the example «...examples\general\graphs\intgraph.llb\Create Table.vi IntGraph color, but the result was far from good.

  Can someone teach me how to generate these color tables? Thank you in advance.

  

  Kind regards

  Mario

  Hi GerdW,

  I'm not sure of the exact way to do it, but I did a simple vi based on your idea. The vi to retrieve the color table I want in the table format, subject me to load the bitmap file that contains only the color scale. Some raster color table constants are included in the VI for those in need. Please see the attachments and give me your comment.

  Kind regards

  Mario

• How to change the color of a part of an object

  As you can see in the image below, I have a log on a layer in AI CC.  I want to do the part of the log that is inside the water appears blue to give the illusion of being under water.  The image below is a rough mock-up I made a screenshot of the image to HAVE in PSD.  Any ideas on how to do this in AI CC are appreciated.  Thank you.

  

  Copy the form of water and river banks.

  Apset before

  Pathfinder palette > less Fornt

  Move the new shape of water on the log, release your layers and dragging the square colored layer unlocked over the newspaper (to the right of the layers palette).

  Set transparency around 50%. Change the mode of fusion also if you wish.

  I can't hear too good on one ear, then we will have to share a nickname tag.

• Some parts of the text color change?

  How can I take a text and select different parts of the text to change the color for the selected party?

  Thank you.

  Depends on. You could do it with a gradient, which would allow you to keep the direct text, but you will need to do a bit of hoop jump to do. Not too much, but your question made me think to your probably not yet to the level of comfort with the Illustrator requires this hoop jump.

  So instead, you'll need transform the text to outlines and then cut it into pieces and pieces of color. When you do this however, you should know that the text is no longer text, it is art and therefore cannot be changed.

  Select the text

  Put contours by typing the command-shift-O (Ctrl-shift-O on PC)

  Select the knife tool in Control Panel tool (not the slice tool, which looks like an exacto blade, but the knife tool that looks like a steak knife. It is hidden under the Eraser tool)

  Drag the tool knife through your letters, making sure to start and stop outside the letters if you cut all the way through.

  Use the direct Selection tool, select the songs you want to color and choose the appropriate color swatch.

  Ta-Da

  Hope that helps,

  Michael

  http://www.learnadobesoftware.com

  Sent from my iPad

• I need to replace a color on my image with a specific part of the image color.  How do I?

  I spent over 2 hours trying to figure out how to replace a color on a part of my image with a specific color indicated on another part of the image.  So far, I was able to go to "Replace color" on my version of Adobe Photoshop, but it seems that I can only change the hue and brightness of the color that it is currently.  I need to use a specific color, so this didn't help me.  Does anyone know how to complete the task that I refer to?

  In addition, please keep in mind that I use Adobe Photoshop 6.0, not a fancy cs version or whatever it is.  So it's fairly old school...

  Any help/comments are greatly appreciated!  Thank you.

  Hello

  In fact, you can choose a specific color using the replace color function!

  Go to Image > adjustments >, replace color

  

  Select the color you want to replace. Then, click on the 'Result' box in the section of replacement (see below)

  

  A color picker dialog box opens, where you can use the eyedropper tool to select a specific color in your image, or you can enter the specific RGB/CMYK values.

  

  Please post again if you have any other questions - I use CS6, but as far as I know, this process works the same for PS 6.0.

  Good luck!