Color ring or enum control instead of text

Similar Questions

• Remove the check mark a ring or an Enum control

  This was requested previously by others, but I've seen a complete response. For a control ring (or enum), a check mark appears next to the current item / selected when you open the menu drop down. Is there a way to remove the check mark? I would like to just a menu drop-down regular and unadorned.

  

  A similar feature exists for context menus in LabVIEW using the terminal "checked" to the "Set Menu Item Info" feature. Is there something like this for the drop-down lists of the rings and enumerations?

  I am aware that a combo box doesn't have these marks, but the drop-down list box is undesirable because it does not open the dropdown menu unless you directly click the drop down arrow. Think of almost any online form you had to fill out and you probably encountered a drop down menu like that I try to recreate, for example:

  

  Thank you!

  Never actually noticed this check until you brought it to the top! A hack that you might try is to change the drop-down list box control, so that the button that goes down the list covers all of the control. You can make transparent and "bring to front", so that if the user clicks on the box, the menu drops down. You can add a small triangle black, just to make it obvious to the user that it goes down.

• How can I do a multiple selection in Enum control or control of the ring or control Combo box

  How can I do a multiple selection in Enum control or control of the ring or control Combo box

  You can not.

  You can use a listbox control.

  An alternative solution is to write the code and each selection, the user gives an enum, for example, can be send to a table and invite the user to continue to select...

• IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

  IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

  Have you checked the obvious things? E.g.Ring/Silent switch on the left side is not on? Control the volume of ringtone under settings/sounds?

  If they are not serious then have you tried power the phone off and on again? Other sounds work fine, or if all sounds are dumb? for example can play you music through the speaker?

• HP 8620:8620 does not correctly print the documents: @PJL lines, scratches stuck instead of text

  Just received this new HP instead HP 8600 8620. Former had some mechanical problems, as it will not load paper or stuck all the scans, well, it may be "just a wear and tear".

  Then, I installed the new HP 8620, connected instead of 8600 to the LAN via a port Ethernet, a new IP assigned.

  Then installed the new software on the users PC.

  Windows XP test page was printed allright, but then...

  Random MS Word 2007 documents will not print. There is a page with @PJL GAME JOB NAME = "Microsoft Word", @PJL lines of COMMENTS and the second page with a few scratches distorted instead of text.

  More interesting, it is - sometimes, it prints to the right. The same document, the same PC, the user-only sending out to print again and voila - document done right.

  Any suggestions?

  Voxel7 wrote:

  I'm having the same problem.

  I'm on Windows 10 & Word 2007. The problematic files contained Hebrew characters in the file name. Rename the file to a name that contains only English letters solved the problem, but this isn't a work around convinient. HP should provide the update of the driver.

  It happened with the default driver that windows installed 10 automatically and complete driver, I downloaded at HP.

  An update:

  Called HP support. They told me to find the IP address of the printer and then go to the Control Panel, the printer settings and to add a printer via the IP address, but not to install the driver automatically to add manually in a list.

  The name of the driver is "driver of HP Deskjet PCL3 class" (use as default printer).

  Yes, it's Deskjet, Officejet and its "HP Deskjet PCL3 class driver ' and not 'HP Deskjet PCL3 class Driver2.

  That fixed the problem.

  HP, please update the original drivers.

• Get points of exclamation instead of text in Safari

  Instead of text showing, all see is exclamation as the screenshot below points. It just started this week and I have to restart the computer and it still appears like this. Very well, things work in Chrome. Any ideas?

  Data sheet:

  OS X EL CAPITAN 10.11.4 version

  Version of Safari 9.1 (11601.5.17.1)

  

  It is an indication of a police problem.

  Launch the police book app located in your Applications folder.

  In the menu bar of the book fonts , click on book of the fonts > Preferences and select: resolve duplicates by moving the files to the trash

  
  

  Quit and then restart Safari to test.

  If that doesn't help you, with the open font book application, return to the menu bar click file > restore fonts Standards

  
  

  Be aware, third party fonts will be placed in a folder 'Fonts to remove' next to the fonts folder.

  Quit and then restart Safari again.

  If this does not help, start in Safe Mode delete font caches.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key. You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  
  

  Then try Safari.
  

  On Safe Mode

  * published by; CS

• Why empty boxes appear instead of text on many web pages?

  Several months ago, we started to have pain on our desktop Mac OS X with Firefox. On many web pages, including the Home Support of Firefox page, I see empty boxes instead of text. The boxes have not all the letters in them. If I copy and paste boxes in MS Word it translates them in the text, but not on the web page.

  You can do a check for fonts corrupted and other police issues:

  • http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html - CreativeTechs Tips: garbled fonts Troubleshooting Guide
  • http://www.thexlab.com/faqs/multipleappsquit.html - help book 2.0 fonts: looking for damaged fonts

• How do 'Enum Control' disabled during the execution of an executable application and make activated when the application is stopped/abandoned?

  Hello

  I use a "Enum control" on the façade of an executable application built with application builder for LabVIEW 2013 full professional development system. I want Enum control remains activated prior to execution of this request so that I can choose any value from the list of available numeric values, but when I run this application; Enum control should become disabled so that the user can not select another value in the list of data during application execution values so that the default setting remains unchanged during the execution of this application. Enum control must also be activated when the application is stopped/abandoned so that the user can select any value.

  Could someone pls suggest a solution to this problem?  If I select the active state' to 'Disabled' in appearance tab then all listed values becomes disabled.

  Concerning

  Jamal

  I suggest to use the node property of persons with reduced mobility.  You can then disable the enum at the beginning of the program and then activate it in the judgment.

• I have problems with your e-mail via a web client is sending no text in the body and sending HTML instead of text.

  I have problems with your e-mail via a web client is sending no text in the body and sending HTML instead of text.  I am told that this problem is because of the BING toolbar on my browser - is this correct?

  original title: Messaging with the BING toolbar problem

  I suggest blind carbon copy yourself e-mails coming out in the future to check for other errors and if they happen then find a new Web hosting provider.  They should have been aware of the conflicts, one would presume.

  Steve

• I find I have been circumvented, however, and am now relegated to 'standard user', preventing parental control instead of applied

  original title: darn childrenI

  I recently had to spend money to have a password reset and to establish myself as an administrator of the machine.  I find I have been circumvented, however, and am now relegated to 'standard user', preventing parental control instead of applied.  How did do it? and how can I, short to wrest from the computer (what I did) restore my admin status?

  We run vista.

  No, you're right.  My point was that I should have created while I still had the power. but I did not dumped.

  2 suggestions...

  1. take your child to the computer, tell him to change your user account to the administrator account while you watch. It is the one who started the mess, make the child facing the music.
  After you're back as an administrator, you can now look at what is a "strong" password and CHANGE your password.

  2. If you are unable to run the routine 'tough love', take your computer to your RELIABLE computer store and the set.

  We cannot help you switch user account to the account admin unless you have the admin password that apparently you have more. We can, in the worst scenario, excluded from this forum if we show you how to do it without admin password.

  t-4-2

• Obtain small squares instead of text on different sites

  It was suggested to me to go to downloads.com so my laptop can read the DVD.  Since it download I get little squares instead of text on some pages for various sites... Even when to go looking for help troubleshooting I get only places.  If I open a new window (new tab) I have graphics but all text has been replaced by small squares.  Help!

  1 try to do system restore to a date prior to this problem.

  2. scan your hard drive using your favorite antivirus (avg free avast home, avira free, mse).

  3 install the mediaplayer from microsoft (windows Media Player) or as software:

  http://filehippo.com/download_klite_mega_codec/

  http://filehippo.com/download_itunes_64/

  http://filehippo.com/download_itunes_32/

  http://filehippo.com/download_vlc_32/

  http://filehippo.com/download_winamp/

• Entry type field that email instead of text

  Hello

  In my form of Muse, I want the input field type to be "e-mail" instead of "text" - like HTML5 mobile type of entry (for example, the info here: entry Types: give users the right keyboard on Mobile Forms - UX movement) so that the messaging keyboard appears on the device instead of the regular keyboard - in the 'Phone' of my site version.

  I have this in a text outside the Muse Editor, after saving the project and the Muse out - but can't find a way within the Muse to change the type of field in a form (without the insertion of HTML and lose the convenience of form widget).

  Is it possible to do this inside the Muse, by using the form widget? Here and on Google search gives me no useful result.

  It's much easier forms for users get right - especially in their email address, that is the question that I most want them to get the right!

  I can do - outside the Muse - but it's painful for my workflow and means manual intervention whenever I publish/Export.

  Thank you

  Dean

  I don't think you can change the type of data entry, unless you make changes through the html of the form section.

  Thank you

  Sanjit

• How do you change the font color in CALL coming OUT of the text boxes in PRO XI?

  How do you change the font color in CALL coming OUT of the text boxes in PRO XI?

  Select it and press Ctrl + E to open the properties bar where the first

  option is the color of the font.

• AAAAAs instead of text in the latest version of Safari

  I get chains AAA surrounded by boxes instead of text in my browser - mainly in the ads and videos that use Flash.  I use the latest version of Safari on my model iMac 2013 27 with OS Mavericks (last update installed) and the latest version of Flash (all this starting from 14/11/14). Anyone else have this problem, and if yes have you been able to solve the problem?  I talked to Apple, who, as always, they spent a lot of time trying to find a solution, but nothing is. After spending a lot of time with a very friendly and knowledgeable advise, they suggested to contact Adobe, and if they do not have a solution, they (Apple) gladly would continue to work on this issue with me.

  I have no doubt that his is a Flash related problem! Thank you!

  Yosemite now installed, I checked on the URL I sent you earlier and no. AAAAAAAs. So far. I hope that this upgrade cleaned some mess caused the problem, but I will not completely convinced until I used some time.  Once again, thank you for all your help with this problem! You're my good Samaritan of the month!

• Extend a control of the ring or enum

  I have rings and enumerations on my front which is disabled and grayed out.  When I click on one of them I turn it on.  However, because it has been disabled in the first drop-down list does not open upward.  I want the box to open on click, rather than having to click again.  I searched through the properties and nothing jumped out at me.

  Anyone know of a solution?

  Thank you.

  Hello

  I took a quick glance to your problem, and I think that's what you want. After your first click, the structure of the event creates a programmatic mouse click at the same place in order to open the menu items. This is done by calling in user32.dll and generating a click of the mouse. After the first click of mouse, the structure event sends another top click on, then start it down and to the top of sequence.

  -Zach