Color variable

Similar Questions

• colors of different e-mail accounts

  Before moving to lollipop my default email application showed the mails from different accounts in different colors.
  Now, all accounts have the same color. How cam I change the color of the accounts?

  Thank you. But it would be nice to add the ability to color variable.

• Assign each pixel at random one of the five predefined colors

  Hello

  I'm writing a script that sets each pixel, randomly, one of the five predefined colors.

  Not much experience with the PS scripts, but I'm a C++ programmer so know the steps I have to do a little:

  • Create a color variables that contain my colors

  • Loop through each pixel, choose a random number from 0-4 to act as an index in the table

  • Set pixel color to the value of the array variable selected at random.

  I am struggling to find the correct code/assembly syntax to put it into action, well!

  Could anyone help with a loop through 'all' or a selection, addresses of pixel, and the syntax for the assignment of color value to a pixel address.

  Thank you

  Steve

  Here's an example of creating the file in Bridge, run the following code from ExtendScript Toolkit...

  #target bridge
  //create empty bitmap
  var bitmap = new BitmapData(100,100);
  var colours = ["#ff0000","#00ff00","#0000ff","#ffff00","#00ffff"];
  var testJpg = new File( Folder.desktop + "/Bitmap Test File.jpg");
  for(var z =0;z		   

• In the components Inspector color picker

  I want to add a parameter to a custom component that uses the color picker in the components Inspector. I'd rather be able to define the parameters of the component with the class (rather than manually add/subtract settings).
  
  However, there seems to be a conflict between the 'Color' parameter type and the class Color.
  
  To reproduce this problem:
  1. define the class of a symbol with the class 'test' attached.
  2. set the component parameters in the definition of "component" for the class with the same class of 'test '.
  3. drag the symbol on the stage.
  4. click on the symbol and set the color parameter in the Component Inspector (important step, otherwise it does not try and set the color)
  5. run - receive "1067: Implicit coercion of a value of type int to type fl.motion:Color unrelated." error.
  
  The only way I can see to resolve this is more like a hack - to remove the class 'test' for the definition of component, but leave the color parameter. Now to adjust the color variable in the class of 'test' to expect an int, rather than color.
  
  However, I prefer to keep the test class in the definition of the element, instead of manually changing the settings.
  
  Feels like this area of component settings is in documentation and even maintenance margin (a sort of type this apparent conflict between the class Color and color setting).
  
  Someone at - it ideas or comments?

  I just found a good tutorial that answered a few questions I had on the custom components - including this question.

  You can separate the definition of the parameter type and the type of variable. You can do this by specifying 'type' in the tag of Inspectable. If its possible to declare a variable of type int, which includes a definition of type "color".

  You do this then: (it is essentially class dzedward where the color variable was declared as int, but with the color type that is specified in the tag of Inspectable)

• My computer hangs when you watch a movie

  original title: my computer crashes!

  Hello!  I have a

  Dell Inspiron 1564

  Intel core cpu m330

  2.13ghz 2.13 ghz

  4.00gs man

  64-bit operating system

  Whenever I play a video game about 10-15 min the screen goes a solid color (variable color) and my speakers go BAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA.

  I ran a full virus scan ect... with Kaspersky and updated all my drivers and I still get the same problem.  This computer is less in a year and has never been dropped or put Treaty anyway.  I do not smoke or drink coffee near my office, or something like that.  Whenever this happens I come closer and closer to grab a hammer and it break into pieces and then set on fire.   Are there suggestions for what I should do?  Also, I was going to run it in geek team at best buy and see if they could understand.  Someone has ideas about how something like this would cost? It should still be under warranty.   HELP HELP HELP HELP!

  It's the third time I asked this question on this forum and still get the typical answers... updated drivers, run anti-virus, ect ect...   If you actually read my post, you would see that I have done all this.

  I actually thought about it.  Want to know what it was? each my laptop was getting hot!  I started noticing that he was burning after about 15-20 min of game play video (intense use become warmer).  I put a bowl of ice cream under my fans and he collapsed since.

  You are the experts... overheating is a fairly typical problem... wonder why no one has suggested.

• Error in the labelling of the layers

  Hello world!

  I want to create a script that could analyze everything stabilized footages in my computer and

  based on the value of the "automatic" scale, he tagged every image with custom colors.

  This is the user interface of the script.

  

  So the problem is on channel 77: comparison is not successful. Isaid that the first "If" statement 135 > 120 does not work and error alerts.

  Even when I swap > to < labelling does not work.

  var pal = new Window("palette","Stabilization Analyzer",[0,0,300,200]);
  pal.solidBt = pal.add ("button", [100,175,200,195],"Analyze");  // button "Analyze"
  
  
  pal.Al = pal.add ("StaticText", [10,10,100,30],"Auto-scale"); // text "Auto-scale > "
  pal.Al = pal.add ("StaticText", [235,10,290,30],"Then colour"); // text "Then Colour "
  
  
  /*Auto-scale text Inputs*/
  pal.num1 = pal.add("EditText",[10,30,60,50],"120");
  pal.num2 = pal.add("EditText",[10,60,60,80],"130");
  pal.num3 = pal.add("EditText",[10,90,60,110],"140");
  pal.num4 = pal.add("EditText",[10,120,60,140],"150");
  
  
  /*Label colours text Inputs*/
  pal.color1 = pal.add("EditText",[235,30,290,50],"1");
  pal.color2 = pal.add("EditText",[235,60,290,80],"2");
  pal.color3 = pal.add("EditText",[235,90,290,110],"3");
  pal.color4 = pal.add("EditText",[235,120,290,140],"4");
  
  
  
  
  pal.solidBt.onClick = analyzeBt_OnClick;  
  
  pal.center();
  pal.show();
  
  
  
  // Analyzing comp
  function analyzeBt_OnClick()
  {
  
  
  var myComp = app.project.activeItem;
      for (var i = 1; i <= myComp.numLayers; i++) {                                       // Selecting all layers of the composition
  
  
  var myName = myComp.layer(i);                                                                   // our layers
  var myEffect = myName.property("Effects").property("Warp Stabilizer");          //  we are interesdet in "Warp Stabilizer: effect 
  var myName = myEffect.property("ADBE SubspaceStabilizer-0017").name;       //  getting "Auto-scale (%number%)"  header from "Warp Stabilizer"
  var numIdx = myName.indexOf("(");
  
          if (numIdx > -1){
                  var myPct = parseFloat(myName.substr(numIdx+1));                    // parsing that %number% from "Auto-scale"   
  
                  alert (myPct);    // ---------- here I receive four values from my test footages (three times 135 and once 107)--------
          }else{
      alert("No percentage found.");
      }
  }       
  
  
  
  
  /*Text inputs "Auto-scale" variables*/
  
  
  var myStab1=parseFloat(pal.num1.text);
  var myStab2=parseFloat(pal.num2.text);
  var myStab3=parseFloat(pal.num3.text);
  var myStab4=parseFloat(pal.num4.text);
  
  
  /*Text inputs "Then color" variables*/
  
  
  var myLabel1=parseFloat(pal.color1.text);
  var myLabel2=parseFloat(pal.color2.text);
  var myLabel3=parseFloat(pal.color3.text);
  var myLabel4=parseFloat(pal.color4.text);
  
  
  
  
   // I don`t know why, but it says that first "if" statement 135 > 120 doesn`t work alerts an error.
  
  
  if (myPct > myStab1) {                          //  comparing "Auto-scale (%number%) with text inputs"
                 myName.label = myLabel1;    //  if true, applying  labels to our layer
  } else if (myPct > myStab2) {
       myName.label = myLabel2;
  } else if (myPct > myStab3) {
       myName.label = myLabel3;
  } else if (myPct > myStab4) {
       myName.label = myLabel4;
  } else {
       alert("Error! No labels applied!");
  }
  
  
  }
  
  

  I think one of the biggest problems is that you used the myName variable to store the layer and then reused to store the name of effect, so by the time you tried to apply the label you were trying to apply the name of the effect. I also imagine that labels must be applied on a per layer basis, which means that the bottom if instructions should actually be inside your loop of model layers.

  This should be a little closer to what you are after. If you haven't done so already, be sure to enable the javascript debugger in EI General prefs, because in this way, you will get errors that will help understand you what you're doing wrong.

  Here's a question for you... How do you put your code in an area you want to keep the formatting?

  var pal = new window ('pallet', 'Stabilization Analyzer', [0, 0, 300, 200]);

  pal.solidBt = pal.add ("button", 100, 175, 200 (195) and "Scan"); button "analyse".

  PAL. Al = pal.add ("StaticText', [10, 10, 100, 30], 'AutoScale'); text "" AutoScale > "."

  PAL. Al = pal.add ("StaticText", 235, 10, 290 (30) and then "color"); text 'then the color '.

  / * Text autoscaling entered * /.

  PAL.num1 = pal.add ("EditText", (10, 30, 60, 50) and "120");

  PAL.num2 = pal.add ("EditText", (10, 60, 60, 80) and "130");

  PAL. NUM3 = pal.add ("EditText", 10, 90, 60 (110) and "140");

  PAL. NUM4 = pal.add ("EditText", 10, 120, 60 (140) and '150');

  / * Color of the label text entered * /.

  PAL.color1 = pal.add ("EditText", 235, 30, 290 (50) and "1");

  PAL.color2 = pal.add ("EditText", 235, 60, 290 (80) and "2");

  PAL.color3 = pal.add ("EditText", 235, 90, 290 (110) and "3");

  PAL.color4 = pal.add ("EditText", 235, 120, 290 (140) and "4");

  pal.solidBt.onClick = analyzeBt_OnClick;

  PAL. Center();

  PAL. Show();

  Analyzing the layout

  function analyzeBt_OnClick() {}

  / * Text entered "Auto scale" variable * /.

  var myStab1 = parseFloat (pal.num1.text);

  var myStab2 = parseFloat (pal.num2.text);

  var myStab3 = parseFloat (pal.num3.text);

  var myStab4 = parseFloat (pal.num4.text);

  / * Text entered variable 'then the color' * /

  var myLabel1 = parseFloat (pal.color1.text);

  var myLabel2 = parseFloat (pal.color2.text);

  var myLabel3 = parseFloat (pal.color3.text);

  var myLabel4 = parseFloat (pal.color4.text);

  var app.project.activeItem = myComp;

  for (var i = 1; i)<= mycomp.numlayers;="" i++)="" {="" selecting="" all="" layers="" of="" the="">

  myLayer var = myComp.layer (i); our layers

  var myEffect = myLayer.property("Effects").property ("stabilizer Warp"); We are interesdet in "stabilizing Warp: effect."

  If (myEffect! = null) {}

  var MyName = myEffect.property("ADBE_SubspaceStabilizer-0017").name;

  var numIdx = myName.indexOf ("("); ")

  If (numIdx >-1) {}

  var myPct = parseFloat (myName.substr (numIdx + 1)); analysis that «Auto-scale» %nombre%

  Alert (myPct); -Here I get four values of my footages of test (135 three times and once 107)-

  If (myPct > myStab1) {/ / comparing "Auto scale (%nombre%) with text entries"}

  myLayer.label = myLabel1; If true, the application of labels to our layer

  } ElseIf (myPct > myStab2) {}

  myLayer.label = myLabel2;

  } ElseIf (myPct > myStab3) {}

  myLayer.label = myLabel3;

  } ElseIf (myPct > myStab4) {}

  myLayer.label = myLabel4;

  }

  }

  } else {}

  Alert ("no percentage found.");

  }

  }

  }

• How to assign colors to a variable?

  In a project, have a dozen titles of half that divides the book into these regions.

  Only a master page, no chapters, not sections.

  The captain is inserted a variable (running heading) based on the twelve titles of half to identify each page parts (1-12)

  I need to change the color of this header running instead of creating twenty master pages.

  A to be scripted?

  I send you a private message with a link wetransfer.

• Variable display color

  With HR just reinstalled my user defined display of the variables in the same color as the rest of the text. I know there is a way to display them in robohelp as a different color, but don't remember how to do it. Please can someone advise?

  Thank you

  Hello

  Try clicking on View > Show > fields.

  See you soon... Rick

• Transfer variable color change color to value

  Hello.

  I have two variables:

  var defaultMainHexidec:Number = 0xFFFFFF;

  var mainHexidec:Number;

  If a value is not assigned to mainHexidec, I attribute the default as follows:

  mainHexidec = defaultMainHexidec;

  trace ("mainHexidec =" + mainHexidec);

  The trace returns the same value as the value returned when the default value.

  But if I use mainHexidec as the fill of a rectangle, the color is black, while the default value is white (or any other color).  If I set the color using the default variable the filling appears correctly.  If I put the number using the number traced in defaultMainHexidec or mainHexidec (she traces the same number) the color is correct.

  Someone has an idea, what happens?

  Best regards

  Chris McLaughlin

  nothing does not appear with the code - unless you create the rectangle before loadContent works?

• The color user-defined variables

  Yesterday I started using variables defined by the user in one of my projects, and whenever I inserted a variable, it was green, which was great because I could easily identify them as variables. Today, I opened my project and noticed that the variables are all normal color text. Is it possible to get them to color again?

  Hello

  Try clicking on View > Show > field.

  See you soon... Rick

• How to use a variable to specify the color when you set an attribute

  Hello
  
  We use BI Publisher (OPE) embedded in the e-Business Suite. So we are actually on version 5.6.3.
  
  I'd like to conditionally set the cell background color attribute in a table by using a variable reference. something like this (the sense in which I tried):
  
  <? attribute@InContext:background-color;$exEmpBGColor? >
  <? attribute@InContext:background-color;' {$exEmpBGColor}'? >
  
  The 'standard' to do this way:
  <? attribute@InContext:background-color; '#CCCCFF'? >
  
  Can someone please help? (i.e. is it even possible?)

  http://winrichman.blogspot.com/2008/09/how-to-set-dynamic-color-based-on-XML.html

  http://winrichman.blogspot.com/search/label/formatting

  http://winrichman.blogspot.com/2009/09/column-formatting.html

• Change the color of Clip from movie with the external Variable

  I have a movieclip in my flash file (WhiteBarMC) I want to be able to change the colors on the use of a variable (hexadecimal number) assigned from an external file. I found a script that comes close to what I want to achieve, but I don't know how to run the changes I need to make it work.
  
  on {(overview)
  var colorful = new color ("_root. WhiteBarMC");
  colorful.setRGB (0 x 006699);
  }
  
  It is narrow because it changes my object/Movie Clip on roll. BUT I have two problems...
  
  1) I want to set the hexadecimal color code in an external file as a flash variable retrieves and then applies to this movieclip. If it helps to explain why, it's because I have multiple variants of this swf throughout my site with a different text that just overlap the coloured bar movieclip (i.e. galleries, contacts, subject, etc.) So, with a change in an external file, I have the ability to change the color bars in the world to match the changing colors on the site.
  
  I created an external file ".txt" with only "myColor var = CC0033" in the file. I don't know if it's right, or even the wrong way, but I thought it help those smarter about what I'm doing.
  
  (2) I don't want my viewers having to "roll" to activate the change. I want it to happen during loading.
  
  
  Anyone who can help is a hero. Don't forget, I'm not this control to the action script, so a little guidance and clarity in your response will allow immensley! I owe you a dinner!

  Place this code on the root timeline containing your video:

  my_lv = new LoadVars();
  my_lv. OnLoad = function (s) {}
  If (s) {}
  var colorful = new color (_root. WhiteBarMC);
  colorful.setRGB (this.myColor);
  } else {}
  trace ("failed to load the file");
  }
  }
  my_lv. Load ("Colors.txt");

  Where colors.txt is a file with: & myColor = 0xCC0033 & (as kglad said)

• Variable color point cloud

  Hi all,

  Has anyone ever put in place a class derived from point cloud which could have different colors? What about the different width of stripe?

  See you soon,.

  Cyrille

  Hi CD,.

  The problem you see is the result of the configuration of the pen. EndCap property is essentially the brush tip style you are using. In my view, that the default is flat, which causes your line look like his zig zag. Instead, use a round tip and you will get a much smoother looking line.

  Dim myPen As New Pen (col, 20)
  
  myPen.EndCap = Drawing2D.LineCap.Round
  
  e.Graphics.DrawLine (myPen, pt1, pt2)

• laserjet pro m176n mfp variables: 0 documents pending of hp color laserjet pro m176n mfp

  Dear Hi

  Print spooler list 0 documents pending after you have sent the print job

  Product name: HP Color Laserjet m176n mfp pro

  Operating system: Windows 7 (64-bit)

  I have re installed my HP Color LaserJet m176n mfp pro to my office. The printer is connected with my laptop with a USB cable. Now I can't print documents from any product of MS Office, but I can print the following file types:

  .jpg
  .PNG
  .gif
  . TIF
  txt.
  .PDF

  The printer will also print content of page Web of Internet Explorer 11. He could not print any format MS WordPad.

  I already uninstalled and reinstalled the software and Ms office several times. I also uninstalled all HP files.

  I tried the convenience of installation HP, HP Print and Scan doctor, HP Support Solutions Framework. I tried to manually re-install all the drivers, I tried every resolution of Microsoft printing problems,

  Thank you for your response about the solution

  Thanks for providing this information houda.

  It may be a problem with user accounts, please try the following to see if it will be useful.

  Go to start, Control Panel, user accounts, change account settings, then drag the slider down to never notify, and then restart the computer and try to print again from the Office again.

  If problems persists, please contact Microsoft to see if they have any other suggestions.

  Please let me know the results. Thank you.

• Police characters &amp; change of color when the Variable entry

  I have a text entry field that should turn "BOLD" & red IF an ID > = KK1 and < = LL2 entered.

  Is there a way to do this?

  1 million thanks!

  Nevermind, I got it on my own.  Here is the code I wrote to make this field works correctly:

  This will change the font color and weight of the S/Ns that have to be reported - DNLE

  (stg2whl_sn.rawValue > "KK31800" & stg2whl_sn.rawValue)<>

  stg2whl_sn. FontColor = "139,0,0";

  }

  on the other

  {

  stg2whl_sn. FontColor = "0,0,0";

  }

  If