The color user-defined variables

Similar Questions

• 9144 with FPGA and SGL EtherCAT custom user-defined Variables?

  Hello

  I currently have a small instrument driver (rs485) running on a chassis of 9144. The output values are communicated to the master EtherCAT using FXP numbers. I would like to pass these FXP to SGL, since I've upgraded to SP1 2012 LV with FPGA now supports numbers of SGL.

  Is this possible? I tried several times to create the Variables defined by the user of SGL in the project, but the date type is gray.

  Greetings from Munich,

  Götz

  Unfortunately, SGL is not a data type supported for communication to and from a 9144. The types of data available for the I/O user-defined variables are:

  * Fixed point
  * Signed integers (Int8, Int16, Int32, Int64)
  * Integers (UInt8, UInt16, UInt32, UInt64)
  * 32 bit field
  * Boolean

  More information on I/O user-defined variables can be found at:

  Programming EtherCAT i/o with FPGA Intelligence to: Differences in LabVIEW FPGA programming API
  http://www.NI.com/white-paper/10618/en#toc4

• What are user defined variables (UDV)?

  I'm trying to debug an application in real time and have worked on known issues for LabVIEW Real-time 2011. There is a term called "user defined Variables (UDV)" that opens occationally document known issues with other documents. It seems that UDVs can be created under target FPGA but I am unable to find any useful information on them. I know only local, global, shared, single, variable IO process.

  Hi Lucie,.

  The /o Variables using the help documentation gives a pretty good explanation of what a user-defined variable is in the section "data i/o Variables for Custom FPGA of e/s". I hope that this documentation helps!

  Best,

  tannerite

• Extracts & user defined Variables

  After ~ 5 years not working not with any what HAT, I started a new post on 28/03/2016 and put back the trial HR 2015 a spin. I'm very excited by what I see and were able to do so far.

  I have 3 'entities' to write and I created 3 pages, one page per entity.

  Each of these presentation pages, I have this first line:

  |

  This section describes how to enter and manage [entity].

  |

  I set each [entity] as a user-defined variable. Each page with this sentence I hard-coded and added a reference to the user defined Variable and then produced output. Works great.

  Now, I'm going 'down' a level. What I want to know is how to

  |

  "This section describes how enter and manage."

  |

  be a code snippet. I want it to be an excerpt because when I write a sentence better, I don't have to make the same change on each of these presentation pages. Finally, there are 19 pages of presentation.

  
  

  Anyone who structure their content like this?

  
  

  What I want to avoid doing several manual changes. For example, if the following examples have been in a RoboHelp project, on https://support.assessment.pearson.com/x/N4Dy, there is this sentence:

  
  

  This section shows you how to manage user accounts.

  
  

  On this page - support to manage test paper - next to PearsonAccess online User Guide - Pearson Assessment - it is this sentence:

  
  

  This section covers all the unique aspects of the test paper.

  
  

  What I'm trying to do, is to have an extract which is defined as:

  
  

  This section tells you how to

  
  

  and refer to it on both pages.

  On the first page, it looks like

  from <>this section tells you how to< / endSnippet >

  user accounts < beginUserDefinedVariable >< / endUserDefinedVariable >.

  Then on the second page, I would say this:

  extract < code > This section tells you how to < / endSnippet >

  < beginUserDefinedVariable > manage paper test < / endUserDefinedVariable >.

  |

  The reason why I want it as a snippet of code is because I don't want to have to maintain "this section tells you how to" text hardcoded on each of these presentation pages. I would like to take advantage of the functionality of content reuse to avoid a bunch of copy / paste or even find / replace.

  Thanks for any help!

  Paul Hanson

  RoboHelp MVP of looonnngggg a long time ago...

  But what you might want to consider, is another variable to contain the desired text in the code snippet. This could be inserted inline. Then update you only in the variable.

  Just thinking out loud a bit.

  See you soon... Rick

• Flash Wrapper and access user-defined variables

  I'm working on creating a Flash AS3 wrapper to combine several files cpativate.  I am able to retrieve system variables, but I'm not able to recover the user-defined variables.  I have a variable that is defined by the user in my Captivate called passedScore, in my Flash script, I have the following...

  var mcLesson1:MovieClip;

  btnHit.addEventListener (MouseEvent.CLICK, test);

  var vLoader:Loader = new Loader();

  vLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, swfLoaded);

  vLoader.load (new URLRequest ("untitled1.swf"));

  function swfLoaded(e:Event):void {}

  mcLesson1 = MovieClip (vLoader.contentLoaderInfo.content);

  vLoader.contentLoaderInfo.removeEventListener (Event.COMPLETE, swfLoaded);

  addChild (mcLesson1);

  }

  function test(event:MouseEvent):void

  {

  feedback1. Text = mcLesson1.cpInfoCourseName;

  feedback2. Text = mcLesson1.m_VarHandle.passedScore;

  }

  retroaction1 correctly displays the name of the course, however, for feedback2 it errors saying a term are indefinite (referring to m_VarHandle)

  try to use mcLesson1.cpEIGetValue ('m_VarHandle.passedScore');

• RH6: User Defined Variable: how to change?

  QUESTION
  Is it possible to change the value of a variable that is defined by the user in RoboHelp 6? If so, please describe.
  
  QUESTION
  After you change a RoboHelp project, I want to update the value of a user-defined variable, but I don't see any way to do this.
  
  BACKGROUND
  My PC is under Win XP SP2. I use RoboHelp 6 to create a HTML Manual. I have several subjects; each topic has its own model. A common feature of each model is a version number. I inserted a variable defined by the user to the version number in each model. RoboHelp pushed successfully this version number to all my subjects.

  If you double-click on the user defined Variable in the project manager, you can change the default value here. I think what you want but is a different value for different generations. In the first page of the wizard when you build there is a button of Variables, you can change it there is for this build.

  You can create different configurations for different versions and each will retain its own value. Craig Clarke wrote an article on what will soon be published on the Adobe site. Hope this helps until then as I know that Craig, who has more knowledge of this area, is currently on holiday.

• Addition of registered symbols and TM for user-defined Variables

  Is it possible to add nurses or symbols marks to the value of the User Defined variable? All our help files are single originating in 2 or more brands of products, so I'm excited about this new feature RH7 (I upgraded x 5). But if I can't add these symbols, then this function is also useful for me as the new logo of HR.

  Hi Eilan

  I just tried a unicode character and it seems to work both webhelp and CHMS very well.

  I went to start. Run and enter "charmap". Selected a symbol and it is entered as the value of the variable. In the variable dialog box, it appeared like a square, but HR, it displays correctly in the WYSIWYG editor, preview, webhelp and in a CHM.

  The fact that the symbol is not correctly displayed in the list of variables can be overcome by a skilful titration of the variable.

  And what is the problem with the logo? :-)

• Red dot on the user-defined variables.

  At the risk of looking like an episode of Seinfeld, there is a red dot on some of my variables defined by the user, does anyone know what this could be?

  

  Thanks for any help,

  Hello

  The red dot means that the variable is set in the defined variable. Without the dot variables are in the variable defined the same as in the definition of the default variable.

  Take a bow

  Willam

• Research of the IOM user-defined field

  Hello
  
  I installed IOM connected to OID.
  
  Now, if I want to create a new field defined by the user (in the creating user profile) to say... Employment-Band (and fill in the drop down for Job-band with the values A, B, C, d, etc), what steps should I follow.
  
  Edited by: Nelly Saluja on February 7, 2010 22:29

  Hello

  If I understand your question, you want to create a new UDF (user-defined field), I have the user profile for this to cretae a udf from the console design, in your case, you have to select the users in the form of name that you want to add a field in the profile.
  Select Search in the field type after that click on the Properties , you need to attach research corresponding to this in the the search code, for this, you must create a search with your values that you want to display the values. Here, you attach it.

  Hope this helps you
  Concerning
  VM

• Extraction of the smartview user-defined fields

  I used fields that are defined by the user to create lists. Does anyone know a way I can extract these fields of HFM using smartview?
  
  Thank you.

  According to Guide of Smartview, user-defined attributes are available for Essbase and HFM no

• I have two docs Illustrator by using the same user-defined palette, but the colors do not match.

  I have similar graphs using 80% of the same color (CMYK) spot such as defined in a saved palette, but it is noticeable darker than the other.

  You have discovered a very powerful feature of Illustrator. You can assign attributes to the level of the group. Alternatively, you can assign attributes to the layer, character and type. Look at your appearance to confirm palette that you assign the assignment.

  For example, if you had a rectangle file with a transparency of 50% of a spot color, and then pull it together you and affect 50% of group, your end color transparent would be 50% of the spot color.

• Could not create the user-defined variables. Help, please.

  Hello. Maybe I will have a PET of brain, but when I click on the double gears (see illustration) to create a new variable, nothing happens. I can create sets of variables, but not UDVs. Anyone know what gives?

  THX.

  -KUrt

  

  My guess is that it's because you have a named Variable set to the specific point. Click on the sample "ke" drop-down and changes to focus the and you should be golden.

  See you soon... Rick

• Conditional User Defined Variable in the table of contents to RH10

  Hello

  I have a unique project created with tags of conditional compilation for a product in several countries. The name of the company was the same in all three countries, but now the name of the company in a country is about to change. I created UDVs with conditional compilation of tags to apply the appropriate name when aid is produced (Yay for RoboHelp 10 for allowing this).

  There are 58 topics in the table of contents that include the name of the company in the title of the topic. My problem is, if I include the UDV to the title of a page in the table of contents, conditional text is ignored.

  I guess that's because the table of contents allowing in conditional constructions apply to the page or the book itself and no text in the name of the page or the book.

  Please can someone confirm that this is the case? If so, I'll make a suggestion to Adobe.

  Thank you.

  Hello

  I hope that Willam won't mind my expand a little on the issue.

  I note that you already seemed to be aware that the UDVs are possible in the text of the table of contents. And if I understand correctly, your problem here is that you want to condition the UDV in the table of contents, right?

  Certainly a way to do that would be to have two different TOC entries. And apply tags to each, so that one or the other would be excluded. But to be honest, I always avoided tagging the elements of the table of contents that I saw myself mixed results.

  The thought here for me is that I wonder why you feel the need to apply a condition to a variable? Why not use a different version of the variable? Of course, you create variables and insert them, but you can actually create different sets of variables that have different values, then when you create your output you simply choose the Variable you want to use.

  See you soon... Rick

• How to get the system user-defined font

  Hi all

  I'm looking for a way to get the font defined by the user in the features of the device.

  My requirment is to check if the user sets the size of the police over 11 or not.

  If the user sets above 11, say to 13 or 14, in my application, I need to change it to 11 vice versa.

  But the application must support the change in size of the font up to 11.

  Please help me through this, if someone has an idea.

  Thank you

  Abhishek

  http://www.BlackBerry.com/developers/docs/6.0.0api/NET/rim/device/API/UI/FontManager.html#setApplica...

• 10g - hide, the report contains the oracle user-defined function

  Hi, experts,
  
  of http://obiee101.blogspot.com/2008/07/obiee-cache-management.html
  
  Reasons why a request is not added to the Cache:
  
  
  
  •The-cacheable SQL element. If a SQL query contains Current_Timestamp, Current_Time, Rand, Populate, or a parameter marker, then it is not added to the cache.
  
  •The-cacheable table. Physical in the Oracle BI Server repository tables can be marked "cacheable". If a query refers to any non-cacheable table then the results of the query will not be added to the cache.
  
  •Cache hit. In general, if the query gets a cache hit on a previously cached query, then the results of the current query are not added to the cache. The exception is query that is aggregated at winding hits hits.
  
  Result set is too large.
  Query is canceled. This can happen by explicit cancellation of Oracle BI Presentation Services or Administration, or implicitly through timeout tool.
  
  •Oracle BI Server is clustered. Queries coming into family "seeding cache" spread in the whole of the cluster. Other queries continue to be stored locally. Therefore, even if a query may be cached on the Server BI Oracle 1 node, it can not be on the node Server BI Oracle 2.
  
  
  
  
  I would like to know
  If the application (report on the dashboard) calls a function defined by the user to oracle, the cache can be created and saved for this report?
  
  Thank you very much!

  Hello stephen,.

  If the application (report on the dashboard) calls a function defined by the user to oracle, the cache can be created and saved for this report?

  Yes, it is cached... function defined in the database is called OBIEE is cached and saved.

  More information and example can be found here http://oraclebizint.wordpress.com/2007/09/10/oracle-bi-ee-10133-support-for-native-database-functions-and-aggregates/

  Hope this helps you. Check answers to any other questions you have posted?

  By,.
  KK