Coloring a label partly

Similar Questions

• Filter of color/side/Label/genre always grayed out?

  In my LR 3.2 (Windows 7 64), orders of the submenu sub filter by color, side, Label, genre are still grayed out, regardless of the source (even with a new catalogue) or catalog.   See the screen capture below.  I know that I can activate filters and get this functionality by other means.  But the menus are practical.  Am I missing something painfully obvious?   The aid does not seem to help.

  

  John,

  It seems that these filters can only be selected when the attribute filter is active in the filter bar (or by choosing 'Activate the filters' in the same menu).

  Gossweiler beat

  Switzerland

• Coloring slider labels

  Can I change the colors of the labels on a slider programmatically?  So far, I tried this:

  char lblArr[3][25] = { "TOP\033fg990000\033bg009900",                                      "MDL\033fg009900\033bg000099",                                      "BTM\033fg000099\033bg990000" };for( i=0; i<3; i++ ){   ReplaceListItem (g_C9492_pnl, C9492_SLIDER_RING, i, lblArr[i], i+1);   ReplaceListItem (g_C9492_pnl, C9492_LISTBOX, i, lblArr[i], i+1);}
  

  The labels in the listbox control is not replaced, but they are not colored. The labels in the slider is not replaced, but the escape sequence are included in the text of the label (and they are not colored).

  DRM for any help...

  Hi BA,.

  use escape codes for the listbox controls, you must set them before the text you want to assign. In addition, you must pass to the escape the real value of the color that you want to set (i.e. 0 x 990000), not its representation of string ("990000") as you do now. This code works colors assigned to the item in the listbox control:

  int i;

  char lblArr [3] [25];

  sprintf (lblArr [0], "\033fg%06X\033bg%06XTOP", 0 x 990000, 0 x 009900);
  sprintf (lblArr [1], '\033fg%06X\033bg%06XMDL', 009900 0 x, 0 x 000099);
  sprintf (lblArr [2], "\033fg%06X\033bg%06XBTM", 000099 0 x, 0 x 990000);
  for (i = 0; i< 3;="" i++)="">
  ReplaceListItem (panelHandle, PANEL_LISTBOX, I, lblArr [i], i + 1);
  }

  Unfortunately this is not possible on the rings of cursor (InsertListItems documentation mentions only listboxes when examining the color escape codes).

• color, PSC 2400 part #H100632782 graphics display is bad.

  Graphic color display port H100632782 number is bad. It is on the HP PSC 2400 photosmart all-in-one series. The display over a period of time just disappeared. The chassis number is CA02124640-0001 model 5610.  I found another number of piece that can work in his place, he is 7Rh100680782.  All these suppliers I checked, no longer have the part available. I use this printer for a MacBookPro.  The software is Mac OSX version 10.7.5. Any help is greatly appreciated.

  CB

  HP Partsurfer site lists the display as Q3083-60016.  It is no longer available through HP, but you may be able to find a replacement with a Google search.

• Compare a color of labels in QML

  How can I compare the color of the label in QML another color. My code below does not work as I expect. Despite the "scoreLabel" having the color "Color.DarkGray" if statements return true.

  I also tried comparing it to the color of Color.create (), but it does not work as expected either.

  if(scoreLabel.textStyle.color != Color.DarkGray/*Color.create("#f89e52")*/){
      scoreLabel.textStyle.color = Color.DarkGray;
  
  //Otherwise make it orange.
  } else {
      scoreLabel.textStyle.color = Color.create("#f89e52")
  }
  

  I'll try to experiment with the C++ export function too.

  The following code seems to work:

  // Navigation pane project template
  import bb.cascades 1.0
  
  Page {
      Container {
          Label {
              id: label
              textStyle { base: style1.style }
              text: "Label text"
          }
          Button {
              id: button
              text: "Click me"
              property variant activeStyle: style1
              onClicked: {
                  if (activeStyle == style1) {
                      label.textStyle.base = style2.style
                      activeStyle = style2
                  } else {
                      label.textStyle.base = style1.style
                      activeStyle = style1
                  }
              }
          }
          attachedObjects: [
              TextStyleDefinition {
                  id: style1
                  color: Color.create("#ff0000")
              },
              TextStyleDefinition {
                  id: style2
                  color: Color.create("#00ff00")
              }
          ]
      }
  }
  

  Exchanging directly colors should also work. Properties can be reallocated to enforcement.

  OK, the C++ method also works. But I think that the States is the best.

  QML:

  // Navigation pane project template
  import bb.cascades 1.0
  
  Page {
      Container {
          Label {
              id: label
              textStyle { color: Color.create("#ff0000") }
              text: "Label text"
          }
          Button {
              id: button
              text: "Click me"
              onClicked: {
                  if (app.colorsEqual(label.textStyle.color, Color.create("#ff0000"))) {
                      label.textStyle.color = Color.create("#00ff00")
                  } else {
                      label.textStyle.color = Color.create("#ff0000")
                  }
              }
          }
      }
  }
  

  Test.HPP:

  #include 
  
  class Test : public QObject
  {
      Q_OBJECT
  public:
      Test(bb::cascades::Application *app);
      virtual ~Test() {}
  
      Q_INVOKABLE bool colorsEqual(bb::cascades::Color color1, bb::cascades::Color color2);
  };
  

  Test.cpp:

  Test::Test(bb::cascades::Application *app)
  : QObject(app)
  {
    ...
      qml->setContextProperty("app", this); // <--------- ADDED
      AbstractPane *root = qml->createRootObject();
      app->setScene(root);
  

  ...

  bool Test::colorsEqual(Color color1, Color color2)
  {
      return color1 == color2;
  }
  

• Color of Label missing after upgrading to LR 2015.5.1.

  My workflow in Lightroom is essentially based on the flags and color label. After the last update LR 2015.5.1 any label of color have disappeared while the s signs always available. Should mean that all marked images are now no while flagged images are always reported correctly.

  I use creative cloud on Mac OS X 10.11.4 and did the update through the creative Application of cloud (as usual). My first idea was the issue could be assessed to the catalog. So I tried a backup of the catalog of before updating with the same result.

  Any ideas or advice?

  I thank you,

  Norbert

  In addition, select some photos that should be labeled and examine the label field in the metadata Panel:

  

  The fields are empty?

• How to change the color of a part of an object

  As you can see in the image below, I have a log on a layer in AI CC.  I want to do the part of the log that is inside the water appears blue to give the illusion of being under water.  The image below is a rough mock-up I made a screenshot of the image to HAVE in PSD.  Any ideas on how to do this in AI CC are appreciated.  Thank you.

  

  Copy the form of water and river banks.

  Apset before

  Pathfinder palette > less Fornt

  Move the new shape of water on the log, release your layers and dragging the square colored layer unlocked over the newspaper (to the right of the layers palette).

  Set transparency around 50%. Change the mode of fusion also if you wish.

  I can't hear too good on one ear, then we will have to share a nickname tag.

• What would be the best way to change the color of a part of this picture? (image attached)

  I am on XP using PS CS4.

  Please see the picture below. I would like to change the color of the shirt/deck of this lady, and I was wondering what the best way is to do it. I know that if I try to change the color, white bowls change color as well. In the past, I've isolated parts of images using paths, but I wanted to know if it was the most effective way. Maybe the masking is the answer. I just wanted to hear from the pros

  

  Thank you.

  I'm not pro, but you can isolate areas likely to be affected by the change of color. Try the quick selection tool (which detects the edges) with mask edge/refine refine to refine the selection.

• Change the color of a part of a conspiracy

  Hello!

  I'm using a graph to visualize data. There are more signals from, and I can choose which signal is sent to the chart. The problem is, I want to indicate somehow, when I change the signal, this is news.

  So here's my question: is it possible to change the chiputa of a conspiracy, but only points ' passes? So, for example, the chart shows speed in red, then I pass the position signal, and it continues to draw in blue.

  Thank you:

  Waszil

  Hi Waszil,

  It is not possible to give different colors for a single parcel, but you can write in a new path and give this color into another.

  Mike

• Color on a part of the graph is shaded - HP PhotoSmart 8250

  HP PhotoSmart 8250

  I try to print a graphic 4 "X 8" (shiny postcard) of a PDF file, but a part of a section of the image on one of the ends (1/3 of the printing area) is partially shaded transparent gray - in particular 1/2 of a face.

  Picture of the subject's head is placed in an oval graphic. The upper part of the grey area is a straight line that runs under the nose of the subject, and the lower part follows the edge curved graphic border (the face and the background resemble the entire bottom half is immersed in a water tank - like the person is in a fish bowl).

  I have test-print a 4 "X 6" photo on a similar document, and it prints well. I ran a test print, which was very good, and I downloaded an updated driver, but there is no improvement.

  It is quite frustrating! Thanks for any help you can give. -Cheryl

  Thanks for the suggestion. I tried the first driver that you recommended, but he offered no paper that I need - 4 X 8 inches. So I re-downloaded the drivers tried and original. I played a bit with the printer and Adobe settings (printing was worse the JPG file), and I managed to get a pretty good quality for printing. Fortunately, it was a one-time project, and print photos of standard size very well. I appreciate the input! -C

• Display problems of color in some parts of the images

  Hello

  I use Lightroom (Current Version 6.5.1) for awhile now, but a few days ago from the colors in my photos started to get weird in some areas of the image. This effect doesn't ' affect all of them. Some are OK.  I tried closing using the graphics processor and restart, but that did not help. Last software update have also an effect.

  Here is an example:

  

  Anyone have any idea how to solve this problem?

  Thank you!

  DC

  Your photo has been damaged due to a hardware malfunction. It could be the card of the camera, card reader/cable USB/USB port, hard drive or memory.

  You will need to run some diagnostic tests to determine the bad component. Try to import photos for different material aid. If possible, bring on a completely different computer.

• How color just a part of an image in white?

  I have a white plane image all and I try to color just the Red of engine nacelles.  No idea how to do this?  Thank you!!

  

  

• Change the color of a part of the image

  CS4 4.2.1

  I want to change the color of a small circular area of the image (more precisely, a mic windguard) from white to a less intrusive darker color.  The movements of the area a bit during shooting, but not too much.    How?

  Tim,

  I'm happy to hear to remove. Who will be the best.

  Discover Track Matte Keying, because it can be very useful for all sorts of things, follow-up of blurs (think license plates and faces), to soften skin tones, to the addition of "cupcakes" to a microphone...

  Sorry for the Internet connection. I was worried that we had been so far in left field, who fled from you.

  Good luck

  Hunt

• Color Sampler script part 2

  Ok. So I'm back at it. Here's what I have a problem to find now any help would be appreciated of course.

  When I use the colorSamplers script I am able to get information on a single point. However, when you set the sampling points there is the possibility to select the single point, 3 by 3 average, 5 by 5 average 11 of 11, etc., and the average number is shown in the Info Panel. But, the script always returns the information of single point and not the average. Is it possible to obtain this information using another script that through every point with the colorSamplers [0] .move () and make the calculation in the script in order to get the average? This is how I do it now, but for large surfaces, it can become slow.

  Any advice?

  No, I don't mind at all. You can replace your scriptlistner turn off with the method DOM comes to make the code a little tighter.

  activeDocument.selection.deselect ();

• Cascades label background color.

  Hello

  Is it possible to set the background color of the label? I would like to simulate a highlight on some of my labels but can't find anything in the docs that can do.

  Thank you!

  It is possible to style HTML text (I never got any work), but if you put the label in its own container, you can then set the background for the container.

  Container {
     id: bunchOLabels
     Container {
        background: Color.Yellow
        Label {
          text: "Yellow"
  
        }
     }
     Container {
        background: Color.Blue
        Label {
          text: "Blue"
        }
     }
  }