Colors and tones move when flatten image

Similar Questions

• A slight color and quality shift when viewing RAW files for the first time in the library Module.

  Hello

  I've been shooting RAW for awhile and have notice that after I import the images and then begin to view in the library Module, I see a light color and quarter of quality - almost looks like a shift in the balance of whites, but not quite.   I thought that maybe there was some preset automatic applied but I do not have all of the presets.

  I'm shooting with a Canon 1DX and 7 d.  I have not checked to see if I get this situation with the 7 d, but I know for sure that I understand with the 1DX.

  Today I have passed through a few images in Bridge and decided to open one in Camera RAW.   At that point I found out that the Style of the images of the camera settings are available, faithful, Standard, Portrait, etc..  I noticed that the images did not camera styles applied to them, but rather the Style Standard Adobe have. At this time there in RAW I chose one of the styles of the camera and the bingo that's the kind of change that I see when I first discover an image in the library of LR4.

  So I can say that the RAW images are becoming the Adobe Standard style applied in LR.   I don't know if it's a default behavior of if I did something to make.  I think also that maybe LR not necessarily applies Styles of the camera automatically even if the particular style has been in the camera - is perhaps not imported as part of the metadata during import and so the default Adobe Standard.

  I guess what I need to know a few things and I hope that someone can educate the beginner!

  1 should I expect LR4 to apply the Style in the game of the camera automatically or not at all?

  2. can I prevent LR to apply the Adobe Standard Style and apply no style?

  3. can I cause some LR apply the Style as set out in the camera for the particular image to be appied automatically when importing?

  Thanks for any guidenace you can offer.  Of course if you need further information or clarification please let me know.

  Scott

  This sounds like what you see, Scott? Why the color or tone of my image changes after import?

  http://forums.Adobe.com/thread/358016

• Color and the quality of the image information

  Happy new year

  Digital images color corrections seem to be more and more important nowadays,

  and as part of the workflow, I understand the relationship between the color information and the quality of the image correctly.

  Photoshop CC IPC States that thereon:

  Format JPEG retains all color information in an image, but it compresses the file size by selectively deleting data.

  More compression, the better the image.

  Does this mean that the quality of the image changes by the compression level (for example, JPEG), even if the same tonal RGB or CMYK range information is kept for the image in a file, regardless of the level of compression?

  Unable to find information on this in the help.

  Answers would be appreciated as always,

  EAD

  JPEG splits RGB in Y of Luminance and Chrominance Cb, Cr

  (by more precise nomenclature: coded inverse gamma numbers r 'B').

  JPEG compression does not fear the lines of Luminance and Chrominance.

  JPEG reduced the number of levels of tones of the scale, less for Y, more for Cb, Cr nets;

  mainly by reducing higher frequency components.

  http://en.Wikipedia.org/wiki/JPEG

  http://docs-Hoffmann.de/jpeg131200.PDF

  Cordially - Gernot Hoffmann

• is there a way to make the icons remain in the same places and not move when I turned off and restart my desktop computer? I like to keep the icons where I put them.

  I do a lot of important writing, and it would be so much nicer if the icons of file would be left in the same positions on the desktop, so that when I started working I don't panic, thinking that some kind an important file has been lost. Please help me understand how to set up my office to keep my icons in place, if possible. Thank you!

  Make sure the settings are as the other poster said.

  This could happen if the Explorer doesn't correctly. The positions of icons are saved at the stop.

  As an experience shutdown shut down Windows Explorer.

  • Create and position a file on the desktop.
  • Close Windows Explorer
  • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete then Task Manager.
  • Control all processes to explore are closed. On the process tab see if Explorer is displayed.
   
  Then to restart Explorer
  • Press Ctrl + Alt + Delete and choose Task Manager
  • In the Task Manager, click the file menu and then click new task (run) and enter explorer

  Is your file in the correct position?

  General Explorer Fixs

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

  You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

  If the problem affects the control panel press Windows key + R and type wercon.

  Close the browser and start a command prompt

  • Close Windows Explorer
  • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete then Task Manager.
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
   
  Then to restart the Explorer after trying all of the following
  • Press Ctrl + Alt + Delete and choose Task Manager
  • In the Task Manager, click the file menu and then click new task (run) and enter explorer
  Reregister the shell registry entries
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   
  regsvr32 /i shell32
  regsvr32 /i urlmon.dll
  regsvr32 RPCRT4.dll
  regsvr32 PROPSYS.dll
  regsvr32 MSCTF.dll
  regsvr32 cscui.dll
  regsvr32 rsaenh.dll
  regsvr32 timedate.cpl
  regsvr32 ATL DLL
  regsvr32 OLEACC.dll
  regsvr32 actxprxy.dll
  regsvr32 USERENV.dll
  regsvr32 msshsq.dll
  regsvr32 NaturalLanguage6.dll
  
  regsvr32 thumbcache.dll
  regsvr32 WINTRUST.dll
  regsvr32 MMDevAPI.DLL
  regsvr32 audioses.dll
  regsvr32 audioeng.dll
  regsvr32 ExplorerFrame.dll
  regsvr32 msi.dll
  regsvr32 FirewallAPI.dll
  regsvr32 netshell.dll
  regsvr32 pnidui.dll
  regsvr32 QUtil.dll
  regsvr32 c:\windows\system32\wpdshserviceobj.dll
  regsvr32 WINHTTP.dll
  regsvr32 C:\windows\system32\qagent.dll
  regsvr32 C:\windows\system32\portabledeviceapi.dll
  regsvr32 wbemprox.dll
  regsvr32 wbemsvc.dll
  regsvr32 fastprox.dll
  regsvr32 imapi2.dll
  regsvr32 wshext.dll
  regsvr32 gameux.dll
  regsvr32 msxml6.dll

  regsvr32 vbscript.dll

  regsvr32 jscript.dll
  regsvr32 wshext.dll
  regsvr32 wshom.ocx

  regsvr32 wshcon.dll

  regsvr32 scrrun.dll

  Delete folder settings
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f
   
  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

   

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f
   
  Delete the thumbnail and icon Caches
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

   

  del "% userprofile%\AppData\Local\IconCache.db".

   

  del "% userprofile%\AppData\Local\*.db".

   
  A boot is a way to explore
   
  It can be caused by a shell extension.
   
  The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.
   
  • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
  • Close Windows Explorer
  • Start Autoruns by right-clicking and choose run as administrator
  • Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
  • Go to the Explorer tab and uncheck everything to the left.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete and choose Task Manager.
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
  • Click the file menu and then click new task (run) and enter explorer

  and if it helps, re-enable one by one to identify the who.

• text and tables move when the browser is resized

  Hello

  IM fairly new to using dreamweaver, but im having this problem because I use photoshop as sort of my background (before saving for the web - where it converts to HTML) before you create layers on dreamweaver to enter text.

  Here is the problem im seen, when I resize the browser (firefox or IE), the text is moved along horizontally instead of being "fixed" in the background.

  Ive attached some screenshots for you guys to understand what im say better.

  (1) the gif file called "enlarged browser" shows how the site looks like when brower is enlarged,

  (2) gif file titled "resized browser" shows how the site looks like after that I have resize the browser. (same thing for IE and Firefox).

  Please let me know what im doing wrong. Greatly appreciated, thanks in advance!

  -Andrew

  What you're doing wrong is unable to understand how to work the "layers". Older versions of Dreamweaver call a layer is a div absolute positioning of elements that are positioned in absolute terms are removed from the normal flow of the web page and placed in the window of the browser in determined points. Everything that is not in a 'sex' is still fluid. So what you see is your resizing tables being reorganized as the size of the browser window is changed, the "layers" are still at their fixed location. Although it seems that the 'layer' is moving, it's the other way around. Everything else is moving, but the layer remains in place.

  Read about the issues of working with absolute positioning here: http://apptools.com/examples/pagelayout101.php.

• Question words of bars and tone

  Hi all;

  A documentary that I just finished has been accepted for broadcast by our State, which is excellent PBS affiliate.   They need me add 60 seconds of bars color and tone, but also a slate and countdown until the film begins.   I know not how to do this, but my question is this: I'm just using the bars and tone in the menu "New" in CS5.  I'm afraid that the color bars and the level of the audio tone may not be any what special meaning for the colors and the audio levels in my 57 minutes long movie.

  In other words I should resolve whatever it is in the tone or bars to better relate to my film?  Or maybe I should reverse that and set the values of color and audio to the best match the bars and tone?  Or if all goes well, I can just not worry.    It's only my second documentary to be picked up by the network, so I obviously don't have a lot of experience.  For the first project in 2012, I used the bars and tone without regard to their link with the film itself, and it seemed all work out.   But I look forward to suggestions.

  Thank you

  Jim G.

  You do NOT set the bars.  They are there as a standard "set up.  These bars because they are going to make sure that your video is played like you cc and it classified.

  You may need to adjust the audio signal to match what the broadcaster use. EG-18-20,-123... I don't care.

• Screen turns all different colors and hot flashes

  Screen turns all different colors and flashes quickly when I plug a flash drive on USB Port. If I stop and restart, it works perfectly once and will do it again.

  Your question has been moved to a more appropriate forum. Please provide more information.

• Keeps changing between the stroke color and fill color? Help!

  Hello world! While working, I have will have to draw the outline of something and then changes to color in, and as I do, I'm changing the fill color using the eyedropper tool, or the Swatches palette. Still my color doesn't seem to change.

  I expect the colors chosen, and it's because for some reason, the program has my color trait selected automatically, even if I use the paint bucket tool, which means that me changing colors is only to change the line color and so, having no effect on the fill color - so I'm frantically clicking to color something with my newly selected color , with does not, because that I do not change the fill color as I thought I did.

  What it seems to boil down to is, SOMETIMES when I draw or change a line, he commutes to line color, and change back when I use the eyedropper and paint bucket tools, as it did in Flash, nice and convenient. Is there a way to prevent it from doing this? Is there a way to make it how it used to be? It really starts to get exasperating.

  Other than I really like the new step up to Animate - the new tools and little more pleasant little General updates do and I want to thank Adobe for him--and make it clear that I am not at all ungrateful for her.

  Thanks in advance.

  Colin thanks for the tip, I could now clearly see the video!

  As Colin described - to 0.34 video, you select the part of the circle (stroke) that modifies the active fill color to the color of the outline (you can identify the active color looking at the State of the fill/stroke button in the tools Panel or color)

  The choice of the color swatch in the swatches Panel is the color of the outline (i.e. to the active color). You can just click Fill on the stage with the selection tool to change the active color to fill and begin your selection Swatch reflects in the painting of your filling.

  The main thing is, if you select only STROKE on stage the active color is set to the race and if you select only fill then the active color is the Fill value. Swatches Panel and color Panel will work to the active color.

  I hope this helps.

  Thank you!

  Mohan

• Why my colors and background image disappear when I saw my site?

  When I check the preview I got the warning saying that some files in my being incorrect or missing on the server. I've been using hexadecimal codes for colors, and my background image does not load. The rest of my content loads perfectly well. Help?

  Hello Monicagrace,

  At what stage you get this error?

  When you click Preview with Muse, on file > Site overview in the browser?

  Are you the same error when publish you on BC? To check this you can publish British Colombia by clicking file > publish to Business Catalyst.

  So what is happening locally (preview or preview in the browser page) then I you advise to clear cookies and cache of the browser and then try to preview.

  Kind regards

  Vivek

• RGB PDF color move when published online

  Hello everyone, this if my first post a question online like this. I would be grateful any advice!

  I created a document in InDesign, which is intended to be uploaded/published for viewing online. A lot of colors and transparency effects applied throughout. I took care to use RGB images and use the Document RGB transparency merger space since the intention for online publication.

  I played with the settings of PDF export over time and get good results with one exception. When the client downloads the final PDF (which correctly sees on the screen)... While it is open in the viewer online, some unwanted color changes are occurring on all pages where a color photo of reform took a transparency (in particular the 'brightness' effect) effect applied to it. Shadows are not a problem... not all the effects seem to provoke the question, but the brightness and I think that multiply and probably a few others along these lines, cause the color change.

  The client has done a workaround to solve the problem by taking the problematic PDF pages, their opening in Photoshop, save in JPEG format (i.e. the page Flattening), then import these JPEG files into an INDD file and re - export to PDF.  So, it seems that the flattening of the image is at stake.

  I looked online and tried to do some research to see if I can take care of flattening, etc. on my end if the client does not... but I'm not find definitive answers. I think my main questions are:

  1. can I export a PDF RGB flattened directly from InDesign

  OR

  2. can I I tweak/flatten my PDF in Acrobat Pro before sending it to the client?

  Thanks in advance for anyone who can point me in the right direction. I am generally able to understand these things on my own, but this one gives me the penalty.

  You can flatten on export by changing the compatibility Acrobat 4 setting, but it is probably better to do it in Acrobat Pro using the PDF Optimization tool.

• My destop all icons are colored and when I try to make crystal or visible, I can't change

  My destop all icons are colored and when I try to make it transparent or visible, I can't change

  Click the Start button, select Control Panel

  Check points: -.
  1. in the performance and Maintenance/adjust Visual effects or if you use the classic theme - settings/system/advanced/performance
  'Use the shadows of the desktop icon labels -' must be checked
  2. right click on the desktop, point to arrange icons by and ensure that items Web Lock on Desktop is unchecked;
  3. If you have content web on your desktop, transparency does not do a right click on the desktop. Select properties, then go to the Desktop tab.
  Click on the button customize the desktop, and then open the Web tab.
  Uncheck everything in the box of Web Pages
  Press OK, then apply and OK again.
  4. you can't have a file html as wallpaper, it must be an image file.
  It is sometimes necessary to restart to take effect, sign out and then sign back in.

• Along with color and star of the bridge do not appear when importing - but after import

  Hello

  I searched through many posts online with the same issue and have not found a viable answer.

  My files have a color and a star rating created in Photo Mechanic or bridge, the two are identical regarding

  like the color and name both appear in each other when opened.

  When I import into LR, I want to only import my color and/or selects stars. None of these labels appear at all

  in the import dialog box. However if I import all the images, they start import, the color and the sides

  appear.

  It seems that LR is reading the files during the import, but not before that.

  How can I make this work?

  Hi Davstr,

  The sides and the color attributes are mainly used to organize images.

  I would like to inform you that it has no option to see the sides or color labels in the Lightroom Import dialog box.

  You can go ahead and post a feature request.

  Feature request/Bug Report Form

  I hope this helps.

  ~ UL

• I merged / flatten image in any way I can get to and one layer seems to keep rev

  I merged / flatten image in any way I can get to and one layer seems to keep back to 'normal' instead of 'linear light' mixture, it was set to.  Help!

  View actual Pixels (100%) is the only way to see what really happens when you edit. Zoom 100% every pixel of your digital file is displayed by a corresponding pixel on the monitor. This is a 1:1 view.

  For some reason (you need to ask an engineer PS) when you merge or flatten, the preview may change. But to be seen (the other before and after merge/flatten) is not accurate. Only the 100% view is accurate. This is particularly evident when you have a drawing the stroke or certain effects or filters that create a lot of detail or contrast.

• How is it when I "Flatten Image" I lose all of my properties of layer Style?

  I have an image in Photoshop.  I click on the text icon and type my website in the photo url.  I then select 'Layer Style' and do some fancy cloak of gout and bevel and Emboss to make the text more.  I then highlight the text layer and the background layer amd select 'Flatten Image'.  When I do this, the text goes back to the default initial value without the Layer Styles, I put for her.  Someone knows why?  Even if I do not choose 'Flatten the Image', the computer it automatically flattens when I save it and that's why, if I open the image you saved it again, it's always the same problem... the text I added appears without the Layer Styles, I've done for her.  Anyone know why or how to fix this?  Thanks, Blake

  As long as you have things to work the way you want I'm happy.

  I apologize for my confusion, but I think that when I stumbled a bit in communication has been saving the actual layer style (for example, so that it can be modified more far, disabled, etc., for a future version of the image) is not the same save the appearance of the layer style in a 'flat', as a JPEG picture.  What I meant is that you can save real nappies and the style settings, etc in a PSD.  Of course, you can record the appearance of having applied these styles in JPEG format.

  -Christmas

• Why has my watch has lost its color and is visible only in the gray tone?

  Why has my iwarch loses its color and is only gray showing tone?

  Hello

  On your iPhone, in the application of the watch, go to: Watch My > general > accessibility > under the title of 'Vision', uncheck / disable the grayscale option.