Question words of bars and tone

Hi all;

A documentary that I just finished has been accepted for broadcast by our State, which is excellent PBS affiliate.   They need me add 60 seconds of bars color and tone, but also a slate and countdown until the film begins.   I know not how to do this, but my question is this: I'm just using the bars and tone in the menu "New" in CS5.  I'm afraid that the color bars and the level of the audio tone may not be any what special meaning for the colors and the audio levels in my 57 minutes long movie.

In other words I should resolve whatever it is in the tone or bars to better relate to my film?  Or maybe I should reverse that and set the values of color and audio to the best match the bars and tone?  Or if all goes well, I can just not worry.    It's only my second documentary to be picked up by the network, so I obviously don't have a lot of experience.  For the first project in 2012, I used the bars and tone without regard to their link with the film itself, and it seemed all work out.   But I look forward to suggestions.

Thank you

Jim G.

You do NOT set the bars.  They are there as a standard "set up.  These bars because they are going to make sure that your video is played like you cc and it classified.

You may need to adjust the audio signal to match what the broadcaster use. EG-18-20,-123... I don't care.

Tags: Premiere

Similar Questions

  • Location of "bars and tone".

    I'm looking for the last 25 minutes... Where in the heck is the title of "Bars and tone"?

    It of that 'Beep' to the title screen and has green, red, orange, yellow lines down the screen... You see when a station is not broadcast or off-grid.  I had on a single video at the end, but for the life of me can not know where he is... Anyone have any ideas?

    version 7

    Thank you!

    In the project Panel, you must go to the new icon (top-right, looks like a sheet of paper, dog-eared in PRI 4) - bars and tone.

    Good luck

    Hunt

    PS - you'll also find things like black Video there too.

  • Question words of VCpu and carrots-sockets

    Hi people

    I am collecting some data of license for our TSM backup solution.

    The Auditors asked for core and taken information for our s VM as well as the ESX host they sit.

    I see that my ESX hosts have 2 ports 4 cores at each (8 logical processors), but how that translates to a VM on the host which has 4 VCPU?

    This is what have VM * 4 * carrots?

    Anyone know how to report on that?

    M

    Millardus wrote:

    I see that my ESX hosts have 2 ports 4 cores at each (8 logical processors), but how that translates to a VM on the host which has 4 VCPU?

    This is what have VM * 4 * carrots?

    In vSphere 4 a configuration 4 vCPU typically resemble the virtual machine as a single-core 4-socket actually, but it on 4.1 can be replaced (by editing the vmx file) to 1 taken with 4 hearts if you wish.

  • In earlier versions, the URL bar had this feautre where you can type in some key words or phrases, and it would take you to relevant directly, much like Google "I m feeling lucky" site feature.

    For example, suppose that you typed in 'democracy wiki' in previous Firefox versions that he would directly take me
    http://en.Wikipedia.org/wiki/democracy

    But now it gives me a regular Google search
    http://www.Google.co.in/search?q=wiki+democracy & ie = UTF-8 & oe = UTF-8 & aq = t & rls = org.mozilla: en - org.mozilla & client = firefox-a

    Another example would be the type of Word to say in "shawshank imdb.
    Earlier: http://www.imdb.com/title/tt0111161/
    Now: http://www.google.co.in/search?q=imdb+shawshank & ie = utf - 8 & oe = utf-8 & aq = t & rls = org.mozilla: en - org.mozilla & client = firefox-a

    I hope you see how the previous function was more orderly and better.

    There is a change in Firefox 4 works in rental search bar.

    • In Firefox 3.6.x, location search bar use Google search "search by name". With innovation by the name search, it will search on Google and

      • If there is a clear match he will take you on the site
      • otherwise, it shows the page of Google search results
    • By default Firefox 4 is
      • to perform a Google search and present the Google search results page If you type something that is not recognized as a URL
      • You must type a full URL, such as www.youtube.com , to go directly to the site

    To get the behavior of Firefox 3.6.x in Firefox 4. you change a hidden preference.

    1. Type of topic: config in the address bar and press the Enter key
    2. If you see a cautionary, accept it (promise to be careful)
    3. Opens a list of preferences
    4. Filter = keyword. URL
    5. In the lower pane, double-click that preference
    6. A small window will appear; copy one of the addresses below and paste it into the box in this window (or type it in the box in this window exactly as shown below):

    Instead of the above, you may install this extension:

    See:

    You need to update the following. The Plugin version (s) below has / have been submitted with your question and is obsolete. You need to update in order to avoid the known security issues with the version (s) you have installed. Click on 'more system info... '. "to the right of your question to see what was included with your question.

    • Shockwave Flash 10.2 r159 (update version 10.3.181.14 released on 2011-05-12)
    1. Check your plugin versions on one of the following links:

  • Update the Flash plugin to the latest version.
    • Download and SAVE to your desktop, so you can find the Setup program later
    • If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
    • Once the download is complete, exit Firefox
    • Click on the installer, you just download and install
      • Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
    • Launch Firefox and recheck your version or up to the download link below to test the installation
    • Download and information: http://www.adobe.com/software/flash/about/
      • Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
      • Use IE to go to the site above to update the ActiveX to IE
    • Download manual installers.
  • I have a HP Vista. My default Word in WordPad documents. How to make spelling and other bars and how to convert to the basic Word.

    I have a HP Vista. My default Word automatically with WordPad documents. It's terrible! How to spell check and other bars and how to convert to Word base. Thank you.

    Microsoft Word is installed?

    If so - what version (start it manually.)

  • I was typing an email that has been of about 200 words I hit the space bar and grabbed the next word and looked up the eyes and my email everything was gone.

    I'm at my wits end, HELP ME! I was typing an email that has been of about 200 words I hit the space bar and grabbed the next word and looked up the eyes and my email everything was gone! This happened to me several times and I can't ever find anywhere. It just disappears. Can someone help me? I want to know why he spends, how I can solve this problem how can I recover my work and where it went! I blame my laptop or windows or the manufacturer?

    I wrote a full description of my problem, but of course it also disappeared. I type 2-300 words and pooofff they disappear I can't explain it better or go on any more because I just it loose once AGAIN all! I tried to explain in more detail a related problem, but of course he gone too so I send this before I lose too.
    original title: email disappears

    The text turns blue, because you mentioned it.  The most plausible explanation to highlight all of the text while typing is due to hit CTRL-A, which is the same as Edit | Select all.  Then when you type a character when this text is highlighted, then highlighted (blue) text is replaced by the character you typed.  Be very careful to not press the CTRL key instead of the SHIFT key when you type a capital letter A or else which will never happen.

    If your cursor jumps around then also scan your system against viruses and malware.

    Steve

  • Hi, on some sites of adobe muse, when I load, I get a mobile version of the site (on a laptop). I tried to remove the 'phone' and the words after that on the address bar and even cleaned my browser, but the problem still exists. What can be the reason? I'

    Hi, on some sites of adobe muse, when I load, I get a mobile version of the site (on a laptop). I tried to remove the 'phone' and the words after that on the address bar and even cleaned my browser, but the problem still exists. What can be the reason? I am using Lenovo y50... help me please

    The y50 Lenovo is a hybrid and that manufacturers are especially ThinkPads, I guess that Adobe sees it as such is why you get the phone display.

    However, you can delete the 5876 to get a view of the desktop and all do it muse site

    for example, the home page

    change the /phone/index.html to businesscatalyst.com/index.html to see the office... I suppect you forgot the slash so delete/phone phone not only

    Office ex = yourweb page | Home

  • In Firefox 3, I could type history search for words in the URL bar and pressing on enter would take me directly the debates, without going through Google. How can I get 4 to do this?

    I could even find in the websites in this way, say by typing France wiki and need me the Wikipedia for the France page, even though I had never been there. (Or sometimes, if I did a search with the term wiki, it would take me to a wiki dedicated to this subject, even though I had never been to this site before.)

    I really do not understand how this feature works, but can I turn it on for firefox 4?

    The change between Firefox 3.6. * and Firefox 4 is how the location bar search. In Firefox 3.6, it uses Google search "search by name". With innovation by the name search, it performs a search on Google and if there is a clear match he will take you on the site, otherwise, it shows the Google search result. With Firefox 4 it performs just a search on Google, if you type in something that is not recognized as a URL.

    To get the behavior of Firefox 3.6 on Firefox 4, you must change a hidden preference.

    1. Type of topic: config in the address bar and press on enter
    2. Accept the warning message that appears, you will be taken to a list of preferences
    3. Locate the preference keyword. URL, double-click it and change its value on the link below

    http://www.Google.com/search?ie=UTF-8 & oe = UTF - 8 & SourceId = navclient & gfns = 1 & q =

    If you prefer, you can also do this by installing traverse it by extension - https://addons.mozilla.org/firefox/addon/browse-by-name

  • Is it possible to display an image full screen; in other words, how to switch all the toolbars - including the status bar and the task bar?

    I found a few larger images (986 x 1024 and 2420 x 2514) I'd like to see on the entire screen. Is there a way to do this by enabling / disabling (then restore it later) of all toolbars - including the status bar and the task bar? Or is there an FF extension that will make perhaps even easier?

    Press F11 or select "full screen" in the menu. (If there is still floating toolbars around after that, do a right-click on the toolbar and remove the checkbox.)

  • How can I create a link or an installer that will open the bookmarks somebody bar and add some bookmarks?

    The goal is to embed a link in a word which, when clicked, opens the bookmarks bar and adds some bookmarks in the document. Another option would be that the link create icons from desktop to Web sites. The main deal breaker is we do not want to change the registry for this. All creative solutions are welcome.

    Thank you

    If it's for users as a whole and not in a given organization, forget the idea of profile, that would be much too intrusive.

    As noted by cor - el, an extension would have privileges to perform these changes. Some resources on developing extensions, since it is beyond the scope of this forum:

  • When you click on the name in the address book - email address looks different in the email address bar and can not be sent - why?

    I've been using thunderbird for a few years - in the last month when I tried to send e-mails, I have a problem with some of them as part of the email address changed when I insert it ino the address bar and has quotes around the first part of the address before the @. I tried to remove the addresses and re - insert them but the same thing happens. If I go to the address bar and delete the commas that the email is sent - can I overcome this problem without having to enter each email? I send emails to many people and change each one who has the problem takes a lot of time. Not all e-mail addresses has this problem. Many thanks - Tim

    The space is not evident.

    The most common and probable cause is you copy paste the email address.
    This can very easily copy paste an empty space and empty spaces do not appear as an easily detected error. But this is the only scenario that I found which produces the question you had - incorrect address Contact framed by double quotes around part first - pre @ but the blue link is good.

    It does not occur if you have an e-mail address is sent to you in an e-mail and you use the left click on the email address and select "add to address book".
    It should not happen if hand typed unless an error is made.

  • The menu bar and HUD elements are unusually high in 22 FF.

    In the new version, the size of the menu bar and toolbars following seems to have increased slightly. This also seems to have forced the icons on the toolbars to expand it, forcing to be blurred as they are displayed in a normal resolution.

    In addition, the zoom level (size of text and element) for many Web pages has increased. Manual reset with ctrl + scroll down works, as well as the pages retain their correct size, but it is frustrating to repeat this for each Web page.

    I checked that the size of text in the Options setting has not been changed.

    What can I do to cancel this change in appearance?

    See

  • My mac does not start, stuck on the loading bar and I can't reinstall OS as it says disk is locked!

    Hello

    my iMac running mountain lion refusing to start, it sticks on the apple logo and progress bar, and the spinning wheel. My files are backed up and sure if this isn't a problem I tried disk utility to reinstall the OS but when I pass the single player is HD recovery and it is blocked! What should I do?

    Installer Lion through Mavericks scratching

    Make sure that you back up your files.

    1. Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the Apple logo appears. Wait for the Utility Menu to appear.
    2. Select in the main menu disk utility and click on the continue button.
    3. After disk utility charges select the volume (this is the entry indented, usually Macintosh HD) in the list to one side. Click on the Erase tab in the main window of disk utility.
    4. Define the type of Format Mac OS extended (journaled). Click on the apply button
    5. When the process is complete, quit disk utility and re-enter the Utility Menu.
    6. Select reinstall OS X and click on the continue button.

    This will install the version of Mac OS X, you had installed.

    HD Recovery must be locked but always bootable. If it's not bootable then the problem is with the drive, but you have not provided sufficient information such as the exact iMac model you have and what you have tried to do, and how you did it. You will need to provide the exact wording of error dialogs that you received. You can try the following, if the disc is locked because of permissions is set incorrectly.

    Set Permissions to a locked drive

    Enter the following commands at the command prompt. Press RETURN after each.

    chflags 0/Volumes / *.

    chmod a + rx/Volumes / *.

    You will need to boot from the HD Recovery to perform the above, because you can't boot OS X.

    Start at the HD Recovery:

    1. reboot the computer.

    2. immediately after the ring, press and hold the

    Keys 'Command' and 'R' together.

    3. release the keys when appears the utilities Menu.

    4. in the Utilities menu in the menu bar select Terminal.

    5. Enter the lines above in the Terminal.

  • I accidentally deleted my tool options bar and can't get it back.

    I tried to delete a toolbar different but clicked on the tool options bar and I can't get it back. Help, please!

    It is not a Toolbar Options.

    For the fi menu bar back its lack, try pressing Alt, then V T M, at the time, in that order, in a new tab.

    Then view-> toolbars to find a turn on the Menu, Navigation and bookmarks toolbars.

    If it does not try to use questions to troubleshoot Firefox in Safe Mode to reset toolbars and controls, from the dialog box shown here: https://support.mozilla.com/en-US/kb/Safe+Mode#Safe_Mode_window

  • How can I recover my address bar and toolbar?

    How can I recover my address bar and toolbar? I is not a place to type the URL, or that you don't have the File, Edit, View, Options in the drop-down menus.

    Menu bar (File, Edit, View, history, Favorites, tools, help)

    Press Alt V T M on your keyboard. This should restore the menu bar (Firefox 3.6)

    Other toolbars

    View | Toolbars | Select the desired toolbar

    Other measures to try

    If you lack the specific icons (e.g.) the arrow back), try to restore the default value set by going to display. Toolbars | Customize | Restore the default set

    Safe mode

    You may need to reset toolbars and controls through Firefox in Safe Mode troubleshooting questions
    Make sure that completely close Firefox first. When you get to the Safe Mode window, select controls and then make changes and restart and reset toolbars.

    I hope this helps!

Maybe you are looking for

  • iCloud and Apple ID servicesafter updated to iOS 10

    I have upgraded to iOS 10 on my iPad 2 Air. Since then, I am unable to connect to the services using iCloud or Apple ID. Does not load App Store, iTunes Store does not load, verification for the two-step verification code are never sent. When I try t

  • Browse clear history

    How delete/delete all history to browse with a single click?

  • Late 2009 iMac Memory Card Slot Gone Bad?

    My memory card seems to have stopped working. Is there a way I can tell if it's the memory real slot hardware vs whether software or my SD card. I have reset PRAM and SMC. I had to reset the PRAM periodically to retrieve my startup chimes. I was wond

  • Poor performance with the slate of HP 7 2800

    Do or can techs HP make remote access with your 7 2800 HP Slate Tablet? I do not use too much according to that I first bought and don't think to ask for a refund. Too late. However, perhaps a remote connection would allow the technicians HP Tablet c

  • Filmmaker, not accepting only not the .mp4 files

    Filmmaker, not accepting only not the .mp4 files