Column derived logical of the MDB - visit bounced

Similar Questions

• How to read the two columns of data from the Port series

  Hello

  I'm reading two columns of data from the serial port.

  Example:

  52439 52430

  52440 52437

  52209 52214

  51065 51070

  52206 52390

  I use the serial of Visa service and I can read the first column of data from the serial port, but I can't understand how to read the second column.

  I want to both sets of chart data.

  I enclose my VI.

  Thank you for your help.

  The analysis of string function takes a "Format string" on top (with the right button of the function and choose Help, which explains all the entries).  In particular, you can say 'Give me two numbers separated by a tab' and the output will be two numbers (whole or floating, depending on the chosen format).  In particular, %d\t%d specifies a decimal integer, , whole decimal.

• Reading of the logic of the notation software

  Try to use logic and the sounds of software included as the playback engine for my partitions created with final 2014 rating software. Find it me hard to imagine that I am the only one having this problem but I can't seem to find the answer to anywhere!

  I activated the IAC driver audio / MIDI set up and added IAC bus 1-4

  In 2014 finals, I activated the ports between applications and reading "MIDI System. I've set up my score so that all (11 litters) wind instruments are forwarded to IAC Bus 1, brass (12 staves) are routed to IAC Bus 2, strings and percussion (15 slats) to Bus IAC 3 effects / other (6 sticks) to IAC Bus 4. "Play Finale through Midi" is checked, and I have disabled human playback as well.

  Logic Pro x, I created a new project with software instruments on different tracks with different MIDI channels that match the MIDI channels I have implemented in the final (i.e.: trips the clarinet 1 in the final to IAC Bus 1/MIDI Channel 5.) In logic, track 5 is a clarinet EXS24 on MIDI Channel 5)

  The problem:

  Actually, I got it to work (it is not more) but only on the 1st 16 channels. I could not figure out how to get the IAC Bus 2 coming to the slopes of brass, the IAC Bus 3-String sounds or the IAC Bus 4 to the sounds of the effect.

  Sorry if this post is a little long and please forgive my ignorance if this question does not belong. I ask the community to Logic Pro because I don't believe that final is the issue here. Any help would be most appreciated!

  MacBook Pro 15 retina, mid-2014, Core i7 2.8 Ghz, 16 GB RAM, OS 10.10.5 (Yosemite)

  Logic Pro 10.2.4

  Final 2014

  MOTU MIDI Express

  Yamaha DX 7 II FD

  You can not. Logic only offers the possibility to receive simultaneously on 16 midi channels. Logic does not enter designations based on the port. If you're limited to 16, regardless of which port you send.

• an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  Hi mdsavol,

  Your observations are accurate. The 'suggestions' are previous entries in the same column that correspond to what has been entered so far in the active cell. The only direct user control is to activate the function turn on or off in numbers preferences > general.

  There are other ways to include or exclude items of suggestions:

  • To remove typos in the suggestions list, the user must correct the typos in the cell above the active cell. If they are more in the list, they won't be presented as suggestions.
  • To include selections added to the list, the user must enter these suggestions in the individual cells above the active cell and column where they are wanted as suggestions.

  There was a request here a while there is a list of suggestion 'live' similar to those of some websites, which offers a descending list of possible entries as a type in an input box.

  The only way I see to reach a solution similar to what you have asked is to use as many lines at the top of the non-en-tete of the table section to list the items likely to repeat in your table, and then hide the lines. You'll need a list for each column where you want to use this feature with a list previously planted. Existing items will then require a likely hit up to three, then a click to choose from a list small enough to enter a value into a cell. News he will need to enter in full the first time, but after that it will be put on the list and answer the same thing as the terms preseeded.

  While your setting upward (or decide not to do), consider going on the menu of number (in numbers), choosing to provide feedback from numbers and writing a feature in Apple request. Describe what you want. Explain how he could help the average user numbers, and then hope for the best.

  Kind regards

  Barry

• Hi, I recently bought numbers in order to create a commercial newspaper. I'm the pen and paper. I need help to create a formula. A purchase column determines if the entry price column is subtracted from the price of output column or output subtracted

  Hi, I recently bought numbers in order to create a commercial newspaper. I'm the pen and paper. I need help to create a formula. A purchase column; Determines if the entry price column is subtracted from the price of output column (buy) or subtracted from (Sell) entry exit. Thank you for your help

  Hi B',.

  Buying and selling in column B

  Price of entry in column c.

  Exit in column D price

  Formula (and outcome) in column E

  If the column will B always contained 'Buy' or 'Sell', it works. It is default to a calculation of 'sell' if sale or has been specified.

  E2: = IF (B = "Buy", D - C, C - D)

  If you want to delay the calculation until the amounts entered in C and D, use this version:

  E2: = IF (OR (LEN (C) < 1, LEN (D) < 1,"", IF (B = "Buy", D - C, C - D) ")

  If you want to delay the calculation until all three ducks are on a line (B contains buy or sell, C and D contain both data), use this version:

  E2: = IF (OR (LEN (C) < 1, LEN (D) < 1,"", IF (B = "Buy", D - C, IF(B="Sell",C-D,) "" ")))

  Third version used in this table.

  

  Kind regards

  Barry

• Error reading the attached viSA-1073807339 using Subvi, but why?

  Hello

  First of all, thanks to all who respond!

  I read N9020A Agilent MXA Signal Analyzer data.  It is successful if a Subvi is used to playback VISA; otherwise "Read Error-1073807339 VISA' rears its ugly little head.»  The Agilent gives the message "REQUEST not COMPLETED" just as endearing.

  The on error-1073807339 OR Knowledge Base article talks about the need to put an end to the chain of command correctly and explains how to check it by double-clicking the control of chain of command on the front and changing the display of '-' Display Mode of the Codes.  I call the VISA Read VI in the block diagram; It does not have a chain of command of front panel control, so I don't know how to apply these tips.

  In any event using a Subvi to perform the Read VISA takes care of the problem, but I have no idea why.  The VI image that does not work is "Agilent MXA Sig Gen vi.png."  A big thank you to Mike on the Agilent forum which provided workaround.

  Nina

  Mark, Fan of the crows and any other interested person:

  I found the error in Agilent MXA GIS Gen.vi.  There is typo in one of the VISA WRITE commands.  Originally, it was

  : MMEMORYATA:? "D:\TEST. PNG"

  It should be

  : MMEMORYATA? "D:\TEST. PNG' (remove: before?)

  Your comments have been invaluable.  Thanks a lot for your help and your patience!

  Nina

• The VI "VISA set up the Serial Port" will only work at 9600 baud

  I wrote a Serial Port RS232 RW.vi monitor of ' "which works for most. The problem is that it will not meet the alternative port configuration settings... For example: the default RS232 serial port configuration is:

  (COM1, 9600 baud, 8 data bits, 1 stop bit, no without parity)

  As a test, I use a Null Modem cable to connect to my LabView Com1 port to another PC running RealTerm Serial Port Monitor... Using my "RW.vi RS232' newly designed with the port settings of (COM1, 9600 baud, 8 data bits, 1 stop bit, no without parity), I can send and cannot receive data back throughout the day no problem...

  However, if I configure the port "RW.vi RS232" all other configurations, such as (COM1, 2400 baud, 7 data, 1 stop bit, odd parity bits)... He will not take the expected risks and continues to operate @ 9600 baud rate etc.

  Then, I changed the settings default "RS232 RW.vi" (2400,7,1, Odd)

  He still refuses to derogate (COM1, 9600,8,1, no...)

  I also went in the Device Manager of Win XP on the system of LabView and configured manually Com1 2400,7,1, Odd

  and yet,... work at the "RS232 RW.vi" @ 9600,8,1, none

  Everyone can test my VI in the car and see if they have the same problem of not being able to see the new changes in the Port configuration settings... other than (COM1, 9600,8,1, no...)...?

  FYI... Unfortunately my LabView runs on Version 6.0, you may need to up-conversion of the attached vi

  Instead of simply appreciate the comments, you need to implement.

  Having closed VISA inside the loop is definitely the problem.  And Crossrulz is 100% correct about the problem being that the serial port gets zero to default baud rate after the closure of the port.  Here's the proof.

  

  Note that while may have set the port settings manually in the Device Manager, these parameters are reviewed by the pilot VISA.  If you look in the measurement and Automation Explorer under devices and Interfaces > serial and Parallel, you'll see the default settings using the VISA driver.  If you change this setting, your program will work as desired.  But this is not the appropriate fix.  The correct solution is to get the VISA close out of the while loop.

  The port settings are established in this order.

  1. by Windows device drivers.

  2. by the VISA driver as set in MAX.  Since you are using VISA, these settings will be automatically replace #1.

  3. by the port settings, you set programmatically in your LabVIEW program.

• Can I do regular expressions or Boolean logic in the search?

  Can I do regular expressions or Boolean logic in the search? (Windows + F) Suppose I want to search pdf files or text files. I can go * .txt | * .pdf?

  I searched for about an hour for a simple answer to this and this is the closest, I came, but it still not answering the question.

  Can I use expressions simple boolian in instant search and if yes what are.

  I think that AND and WOULDN'T cover 90% of what I want.

  I want to search for emails for things such as [Minutes AND project x]

  Currently, this property returns all the messeges with minutes and all messages with project x.
  Since I have minutes of many projects, and many emails with project x not the minutes that returns are many.   I would use a simple AND to get the intersection.

  If and expression exist, I have found no reference to it.

  According to me, the back had these expressions in the search function.

  Thank you

• I am trying to install a plugin for WMC, but there is no column of extras in the program.

  Options column does not appear in Windows Media Center

  I am trying to install a plugin for WMC, but there is no column of extras in the program. I followed a troubleshooting thread where he has proposed to delete a file in ehome, and then restart the PC, but it did nothing and the Extra option is still not there.

  Any ideas?

  No hope then?

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.
  http://support.Microsoft.com/kb/929833

• column headers dynamically change the date filter-based selection? in obiee 11g Analytics

  Hello

  I work an analytic of obiee 11g.

  I have my report coulmns five... who are the branch, district, DS, current year, the previous year.

  based on the article on the query filter, column headings change dynamically.

  column headings are current, previous year Yes r;

  current month, previous month;

  current week and the previous week.

  for example, if I select the year 2016.

  column headings are Branch, district, DS, 2016, 2015 will change dynamically in the analytical report...

  Please help me,

  I tried, but I do not have...

  Please help me,

  A.Kavya.

  I'm not really sure what you have, but assuming that you have a command prompt of dashboard with the year of the column, define a variable presentation for this column (pv_year) and then in the report, for the columns you want, set the column as header @{pv_year} and @{pv_year-1}.

  He must pick up the values from the command prompt and dynamically set in the column headers.

• Column ' provisioned on ' in the tab accounts

  Hello

  can you help me identify which table contains the column "put into service the ' that we see in the tab accounts.

  Thanks in advance.

  Attribute ' provisioned on "is taken from the table of ORC. 'ORC_CREATE' is ' provisioned on "any instance of account.

  OUEDRAOGO, oiu_prov_start_date, and oiu_prov_end_date terms of commissioning start date and end date of account/payment.

  

  __

  When closing a thread like a response please do not forget to mark the messages correct and useful to make it easier for others to find their

• At what stage of the treatment we use a rule to update to apply logic to the way the data are updated in the database?

  Hello

  At what stage of treatment do you use a rule to update to apply logic to the way the data are updated in the database?

  Rahul

  Hello Rahul,

  Update the existing record or a data object

  Thank you

  edynamic expert Eloqua

• Involuntary and moving the hidden columns after correction in the SQL

  Hello

  I am very new to the APEX and created an interactive report. I was to adjust manually using SQL column name in the Source of the region box and noticed one of my columns moved to the right of the report.

  When I unstapled "column_name" AS "column 1" disappeared from the column of the report.

  I cannot find any setting where it is specified as hidden, and when I click to filter the report via the Actions button, it appears under the section 'Other' under the section 'displayed '.

  Is there an easy way to display this column?

  Thank you very much

  Matthew

  1135826 wrote:

  Please update your forum profile with a recognizable username instead of "1135826": Video tutorial how to change username available

  Always include the information referred to in these guidelines when you post a question: How to get the answers from the forum

  I am very new to the APEX and created an interactive report. I was to adjust manually using SQL column name in the Source of the region box and noticed one of my columns moved to the right of the report.

  When I unstapled "column_name" AS "column 1" disappeared from the column of the report.

  I cannot find any setting where it is specified as hidden, and when I click to filter the report via the Actions button, it appears under the section 'Other' under the section 'displayed '.

  Is there an easy way to display this column?

  After adding new columns or change the names of columns in an existing IR, you must select them for display as developer and Save the new report as the default main.

• Where to place business logic in the following case.

  Hello

  The user interacts with a button on the user interface. The business logic is to call a web service and do some simple calculations and then return the result in the same page.

  The web service is already available on the server of the soa. Where should I put my business logic? Call POJO (who hold the business logic) managed a bean method related to the user interface button?

  Create a service in AM method and call the pojo holding business logic? Business logic should go in the template project? If its model in how I access it on a click on the button in the view?

  Please help and made me know the flow and the right place to include business logic.

  Concerning

  As its name suggests, the business logic belongs to the model layer. Separation of concerns must be in this case too.

  You implement a method in the module of the application that does all the work and returns the answer to the view layer where show you. In this way, you can change the implementation without changing the substance of the user interface. The interface is the method with its parameters.

  ADF allows you to call a public from the application module method as for example the commit method. You drag the operation of the data control to the page and drop it as a button. This will create the necessary liaison and a block on the button calls the method.

  If you call a web service, a good practice is to wrap the web service in a pojo to add a layer of abstraction that you can then use to implement advanced logic. The pojo belongs to the model layer.

  Timo

• I have the table of 3 columns A, B, C. I want to store the sum of columns A B in the C column without using the DML statements. Can anyone help please how to do. ?

  I have the table of 3 columns A, B, C. I want to store the sum of columns A B in the C column without using the DML statements. Can anyone help please how to do. ?

  11.1 and especially you have virtual column

  SQL> create table t
    2  (
    3     a number
    4   , b number
    5   , c generated always as (a+b) virtual
    6  );
  
  Table created.
  
  SQL> insert into t (a, b) values (1, 2);
  
  1 row created.
  
  SQL> select * from t;
  
           A          B          C
  ---------- ---------- ----------
           1          2          3
  

  Before that, a front insert - trigger

  SQL> create table t
    2  (
    3     a number
    4   , b number
    5   , c number
    6  );
  
  Table created.
  
  SQL> create or replace trigger t_default before insert on t for each row
    2  begin
    3    :new.c := :new.a+:new.b;
    4  end;
    5  /
  
  Trigger created.
  
  SQL> insert into t (a, b) values (1, 2);
  
  1 row created.
  
  SQL> select * from t;
  
           A          B          C
  ---------- ---------- ----------
           1          2          3