Column width classic report apex 5.0
Hello
Using the latest version of the Apex
version: 5.0.0.00.31
Information of the database: Oracle Database Enterprise Edition Release 12.1.0.2.0 12 c - 64 bit
Theme: Universal Theme,
Models Page and the region: Standard
I wanted to know what is the correct way to set the width of a column on a classic report in the new theme.
I have two columns in the classic report and uses the form fields Stretch on model options in region I need the report to take the entire length of the region.
I want to control the width of the first column to take less bandwidth. Currently, each column is set to 50% each.
Please provide your suggestions.
Hi Madhu,
Go to the Page attribute
under CSS-> Inline-> put the code below
td[headers="JOB"] {
width: 200px !important;
}
Here, instead of WORK put the column heading that you want to increase the width
Kind regards
Jitendra
Tags: Database
Similar Questions
-
How to specify the width of the column for classic report in 5 Apex?
5 apex, I click on the name of the report in tabular form and then go to the tab report attributes. When you look at the attributes column, there is a list of the database columns that are included in the report. One of the attributes is the column width. Regardless of the value, as I type, the column widths do not change when you view the results of the report.
For a particular column of data in the report, which is editable, this is show only about 20 characters and I want to show him perhaps 50 characters. It would be great if it would also wrap up the value of a new line when the size of the data is too large to fit in the allotted space.
I guess that it is a simple setting and I looking in the wrong place.
Help, please.
Thank you
Kim
Hi Kim
Bakhtiyar post is the correct answer. However, there are occasions where does not display the width option in the attributes Panel. that was the position that I assumed you are in. It depends on how the form of tables was created. If it was created using the wizard, no problem. If the form has been created manually (IE without using the Wizard), and then depending on the model used, the width option does not appear. The only way we found it is to recreate the form (using the Wizard). Or use the css above.
I hope that your form displays the width option.
Concerning
Paul
-
Select row column in classic report default beat all
Hello
Based on my previous thread how can I do the same task in classic report.
I followed your previous link to all select and clear the all check box.
even he just not all checked when the page loads.
Please help with this too.
Hi Maxence,
CORINE wrote:
Hello
Based on my previous thread how can I do the same task in classic report.
I followed your previous link to all select and clear the all check box.
even he just not all checked when the page loads.
Please help with this too.
The answer lies in the previous thread: Select the row column in report default heartbeat intractive all
I hope this helps!
Kind regards
Kiran
-
"Character String Buffer too small" classic report Apex 3.2.1
Hi all
I know it's a very old version I mention here, but that's what we have in our environment, would be very grateful if anyone can help out.
I have a classic report with the sub query in this, I have added a filter using an element from the selection list (P70_GROUP).
SELECT VWS. ServerID AS Display_ID, vws. ServerID AS ID, vws. Host name, vws. ServerStatus, vws. SiteName AS Site vws. Customer, vws. CoreHours, vws. Patch_Notes, vws. PATCH_DEP, vws. Patch_Day, vws. PATCH_GROUPID, vws. PATCH_TIMEID AS VW_Live_Support FROM Time LEFT JOIN W_Patch_Groups wpg vws WE (vws. Patch_GroupID = wpg.ID) WHERE the vws. ID = ' no AND NVL (wpg. Ignore, 'n') = ' n AND ((: P70_GROUP > 1 AND vws.)) PATCH_GROUPID =: P70_GROUP) OR (: P70_GROUP = 1 AND vws.) (Patch_GroupID IS NULL) OR (NVL(:P70_GROUP,0) = 0)) AND (INSTR (UPPER (vws. Host name), SUPERIOR (NVL (: P70_SEARCH, vws.)) HostName))) > 0 OR INSTR (UPPER (vws. ServerStatus), SUPERIOR (NVL (: P70_SEARCH, vws.)) ServerStatus))) > 0 OR INSTR (UPPER (vws. SiteName), SUPERIOR (NVL (: P70_SEARCH, vws.)) SiteName))) > 0 OR INSTR (UPPER (vws. (Client), SUPERIOR (NVL (: P70_SEARCH, vws.)) Customer))) > 0 OR INSTR (UPPER (vws. CoreHours), SUPERIOR (NVL (: P70_SEARCH, vws.)) CoreHours))) > 0 OR INSTR (UPPER (vws. Patch_Notes), SUPERIOR (NVL (: P70_SEARCH, vws.)) (Patch_Notes))) > 0)
This is when I select a group in the list, I get
"error report:
"ORA-06502: PL/SQL: digital or value error: character string buffer too small.
an unusual thing, that I've noticed here is when I select "All groups", which returns the value 0, it is works well and return of 3700 lines but when I select any group that returns 10 to 20 lines I get the above error.
does not include why it is, please help me.
Kind regards
Tauceef
Hi all
I am able to solve the problem by referring to the link below:
What I am able to solve without even changing the item type. Things are working fine now, but it would be really helpful if someone could give me their expert commentary on the solution above.
Is this feasible? I'll be able to solve the problem forever, or it will cause problems again in the future?
Kind regards
Tauceef
-
Link of the conditional column in classic report
I am tring to display a link in a column only if another column has a value in the same row. However, the column, I try to display conditionally must call a javascript function when the click on (it pops up a modal window) and it must include an image.
My report request is
Select
AC. C001,
AC. C015
apex_util.prepare_url ('f? p = & APP_ID.:4: & SESSION.: &. DEBUG: P4_PARCEL_ID:' | ac.c001) LINK_URL,-my link conditional image onclick
Of apex_collections ac
WHERE collection_name =: P3_COLLECTION_NAME
Report of the attribute COLUMN BINDING settings are:
LINK ATTRIBUTE: < img src = "" #WORKSPACE_IMAGES #fff_report.png "/ >"
URL: javascript:mymodal('#LINK_URL#','View_Comments')
It works, but it shows the picture report.png on each line of the report. I need to combine the link attribute and the url in the statement select with a CASE to view statement conditionally cela but I can't get the good constructed string... can help any one?
I'm looking for
SELECT
case if ac.c015 is not null then
apex_util.prepare_url ('f? p = & APP_ID.:4: & SESSION.: &. DEBUG: P4_PARCEL_ID:' | ac.c001) LINK_URL (add on the image and appeal of javascript...?)
on the other
null
end LINK_URL
Of...
Thank you
Andy
Hi Andy,.
It works for me, it will help to prepare the good instruction box with pictures and without images
Select '
' of the double-Sunil Bhatia
-
How to set the column width in the classic report.
Dear friends
I use Apex 3.2.
I created Clasic report and I have the analytical column in my report this column I description of the problem, so I want to set the width of this column nn classic report.
I try a code in the expression of html
style = "width: 480px;" display: block; space: normal; do-size: 11px; ' >Dear Newcomb, greetings! Thank you very much for the new request, and we are pleased to confirm the availability of a single cabin in all three categories of cabin on the M.V. Mahabaahu. We wish to inform you that two departures on October 15, 2013 & 29 October 2013 (golden triangle with Cruise) are operational and attached are the prices for your kind attention. As a special promotion for October 15, 2013 start only, we offer 100 USD by reduction of the person on the triangle of gold, combined to the cruise portion. Please review and advise us to block accommodation as a result. Cordially... pepette<span>style="width: 480px; display: block; white-space: normal; font-size: 11px;">#ACTIVITY_SUMMARY#</span> {code after apply abovemention code that display me in my summary like this and not manage width of column.How to fix Width of column in classic report. ThanksHi najet
Try this
#ACTIVITY_SUMMARY#the * > * is removed.
Kind regards
Kees Vlek
-----
Company: http://www.orcado.nl
Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek
Twitter: http://www.twitter.com/skier66
If the answer to question please change replied and mark the appropriate post as correct / helpful. -
Classic report with column LOV
I have simple classic report (Apex 4.2.4) with two columns. One is to main table and shows the ID; another column is LOV that contains detail table names, which must FK main table.
Table structure:
master_table (id NUMBER);
detail_table (detail_name VARCHAR2 (50), master_id NUMBER);
Source report looks like:
Select
ID,
lov_column null
of master_table;
lov_column is defined as a query in function LOV and query looks like:
Select detail_name from detail_table
where master_id = #ID #.
But the application does not recognize the values #ID #? Can I use it without the WHERE statement, but in this case in LOV, I got all the records, and that I want in a folder have values only for this ID.
What can I do?
Thanks in advance.
Kiran I thank you for your care, I finally found the solution.
Apex.Oracle.com cloud works with Apex5, it is not possible to obtain a classical column LOV relation, but it is possible to do this by using APEX_ITEM. SELECT_LIST_FROM_QUERY. And so I did in my application.
in the statement I wrote:
Select
Mt.ID,
apex_item.select_list_from_query (1, null, "select dt.detail_code d, dt.detail_code r detail_table dt where dt.master_id = ' |") Mt.ID) retail
of master_table TM;
And it works!
-
How to dynamically generate columns in conventional reports
Hi all
How to create dynamic columns in classic reports.
I need to create these columns that depends on the difference of the date column start date and end date.
for example: 4 November 2015 start_date and end_date is November 7, 2015
I show the columns Day1, day 2, day 3 and day 4.
and the values of these columns are checkboxes.
Kind regards
Arianne.
Hi ujwala1234,
ujwala1234 wrote:
How to create dynamic columns in classic reports.
I need to create these columns that depends on the difference of the date column start date and end date.
for example: 4 November 2015 start_date and end_date is November 7, 2015
I show the columns Day1, day 2, day 3 and day 4.
and the values of these columns are checkboxes.
The old packed timesheet application has the tip for how to display the day of the week selected by the user in the form of columns in the tabular presentation.
Reference: old packages of timesheet Application
That's how I'd do:
- Select the range of dates populate the days between the date columns range in a collection of the APEX.
- Display the columns as editable using the APEX_ITEM API.
NOTE: Application of time sheets there was select list for weeks, so always the number of dynamic columns would be 7 + column code time.
Also, the maximum number of modifiable columns, you can use on your page APEX is 50.
Kind regards
Kiran
-
How to adjust column widths individual classic SQL report
Hello
I use Oracle APEX v4.2 with IE8 browser and basically tries to adjust widths of individual columns in my classic SQL report. Basically, I have three columns I want to spacing, so that the width of the entire region for the report is used, but am not sure how to proceed.
I drilled in individual columns and specified the column widths as the element, but in vain.
Would appreciate help on how to do this for each column and hope that I do not need to change the model of report (if possible).
Thank you.
Tony.
Tony F. says:
I use Oracle APEX v4.2 with IE8 browser and basically tries to adjust widths of individual columns in my classic SQL report. Basically, I have three columns I want to spacing, so that the width of the entire region for the report is used, but am not sure how to proceed.
There is an element of uncertainty in what we suggest as well, because you have not specified the theme and the report of model that is used. This information is required for any question of formatting or the visual layout.
I drilled in individual columns and specified the column widths as the element, but in vain.
Report in some themes templates may be missing in the #COLUMN_WIDTH substitution string # required for use of the declarative column widths, as shown here: Re: width of column in reports
I don't know why it would be missing from a theme of so-called "modern" (perhaps the lack of documentation affects even the Oracle theme designers), but you can add it to the models listed in this thread.
Width of the element applies only to controls on a form in a table.
Would appreciate help on how to do this for each column and hope that I do not need to change the model of report (if possible).
This can be done using selectors CSS attribute (for the themes of quirks mode non-traditional, because you are using a legacy version of IE). Add a style sheet in CSS Inline property page:
#ALIAS, td[headers="ALIAS"] { width: 40%; }where the
ALIASvalue in the attribute selector matches the required column alias, and the width property specifies the column dimension required and the units.Note that the percentage widths will be compared to the width of the report table. Therefore, it may be necessary to also specify widths (100%) for the table of report and its components. Exactly how is based on the report, the region and the page templates and theme used, information that was not provided.
-
I'm on version 4.1.1.00.23 of the APEX. I've created a classic report and I am trying to sort. Here's how I'm trying to sort by column name. I have TotPGPV with sorting sequence 1 desc and NewTOTPGPV with sorting sequence 2 desc. I have Count1, Count5 with the sort column. What I'm asking is when the report is run can column sorting to default Count1 and Count5 descending instead of the ascendant. I don't see anywhere to set the default value for the sort column.
Hi - on the report of the page attributes - that you show in your attached screenshot - you can select the columns to sort on the sort sequence as well as the direction of the sort, i.e. for a given column, you can choose to allow sorting on this column, what position this column must be in the sort sequence and whether to sort Ascending or descending by default (i.e. '1' means sort this column first and bottom-up and "1 desc") sort this column first and downhill). Don't forget that once you click on one of the headings of column during execution, it changes your sort settings and these settings are stored in your preferences, that is, they are used again the next time you log in your application and rerun the report.
Kind regards
Marc -
change the color of line based on the value of column 5 Apex in the classic report
Version of the apex 5.0.0.00.31
Standard universal theme
Page theme default template
Classic report
Foldable report template
Hello
I know this question has been asked several times here, but I'm working on 5 Apex and need to know the correct way to do it in this version.
I need to change the color of the text of the entire line (no background color) based on the value in one of the columns of the classic report. I have just two conditions, if the value of column = Yes, color should be red, otherwise it must be green.
I am new to jscript and css, so appreciate if someone can tell me the solution with steps.
I have already checked this link that changes the value of the column, need to do something similar to the whole line.
https://tylermuth.WordPress.com/2007/12/01/conditional-column-formatting-in-apex/
Hi coolmaddy007-Oracle,.
Here's an example set up on the apex.oracle.com according to the specifications you gave: https://apex.oracle.com/pls/apex/f?p=35467:1
Version of the apex 5.0.0.00.31
Standard universal theme
Page theme default template
Classic report
Foldable report template
Here is how it is done:
Create a dynamic action with the following specifications:
Name: Give the appropriate name
Event: After refresh
Selection type: region
Region: select your region classic report
Condition: No strings attached
Action: Run the JavaScript Code
Fire on loading the Page: Yes
Code:
$('td[headers="JOB"]').each(function() { if ( $(this).text() === 'MANAGER' ) { $(this).closest('tr').find('td').css({"color":"red"}); } if ( $(this).text() === 'SALESMAN' ) { $(this).closest('tr').find('td').css({"color":"green"}); } if ( $(this).text() === 'CLERK' ) { $(this).closest('tr').find('td').css({"color":"blue"}); } });NOTE: Download the selector appropriate for your knowledge $('td[headers="JOB"]') case using firebug/browser development tools.
Items concerned: leave blank.
PS: Changed the example to change the color of text instead of the background color.
I hope this helps!
Kind regards
Kiran
-
How to avoid the total general of the classic report when the column break is installed in the Apex
Hi all
I develop application using Oracle Apex 4.2.0.
I created the classic report Page.
That I have summarized a column by selecting the check box check sum for the column.
His shows the Grand Total.
Then I chose the columns to break to the first column.
His show the total groupwise and total as well as great as image below.
My requirement is
Need to hide total(Total:)) GroupWise or total general. I need to show any a total, not both.
How to do this?
Thank you
Su.GI
Su.GI wrote:
Hi, thanks for your response.
I use theme - productivity Application - issue 26
-Standard model
Report - report of Standart for classic report model.
The above CSS code where I want to use in the page or report or model region.
Specify a static region ID for the report area and put the following CSS rule in the CSS Inline property page:
#static-region-id .uReportStandard tr:last-child td { display: none; }where
static-region-idis the ID specified for the region. -
Columns group apex 4 classic report
Hello
Does anyone know how to group the columns classic report? I use 4 Apex.
Thank you.
AndySimple. Create a named column (model line). Use the col/colgroup HTML and th elements and the colspan attribute to structure the headers and column groups in the definition of the model lines before :
Group 1 Group 2 Empno Ename Job Mgr Hiredate Sal Comm Deptno Complete the rest of the model if necessary.
How to create a column width fixed in an interactive report 4 APEX?
This thread is a continuation of {message identifier: = 9191195}. Thank you fac586.
Partial success: the following code provided by fac586 limit the width of the column of the Apex 4 interactive report as long as the data in the column contains a white space in a browser Firefox 3.6:
< pre class = "jive-pre" >
< style type = "text/css" >
e #T_DESCRIPTION {}
Width: 300px;
}
TD [headers = "T_DESCRIPTION"] {}
Width: 300px;
dressing: break-Word;
}
< / style >
< / pre >
Notes:
1. the above code is placed in the HTML header for the page section.
2 T_DESCRIPTION is defined as VARCHAR2 (2000).
3. the above code works in Firefox 3.6.12 browser but does not work in the browser Internet Explorer 7.0.5730.13.
I tried to add "float: left;":
< pre class = "jive-pre" >
< style type = "text/css" >
e #T_DESCRIPTION {}
Width: 300px;
}
TD [headers = "T_DESCRIPTION"] {}
Width: 300px;
dressing: break-Word;
< font color = "red" > float: left; < / police >
}
< / style >
< / pre >
Notes:
1 "float: left;" requires no white space and successfully splits the column between the characters instead of whitespace.
2. "float: left;" reduces the height of the cell and allows the page to show through... could not determine how to solve this fundamental problem.
3. the above code works in Firefox 3.6.12 browser but does not work in the browser Internet Explorer 7.0.5730.13.
I've did some more research, but I've yet to discover how to create a fixed-width column in an interactive APEX 4 report that displays correctly in Internet Explorer 7 browser.
Ideas and help will be appreciated.what theme are you using?
A customized version of the 15 theme.
You said you were using APEX 4.0, if I was testing on 4.0, but using one of its new themes based on the standards. 15 theme is a theme of legacy from older versions of APEX, mainly to ensure a certain level of support for the despised IE6 browser. The new themes are designed to restore mode standard and those inherited mode quirks (This is explained here). Firefox (and Safari, Opera and Chrome, and...) for your application, it's academic: all the required CSS: selectors attribute, the property max-width and dressing work in two modes.
Enter Microsoft. They decided that in IE7, backwards compatibility meant that new CSS features would be supported only in standard mode, even if they had never been implemented in older versions, with no previous, behavior that may break. Go figure. Yes, even so the dressing will work in quirks mode (no surprise - Microsoft invented), attribute selectors, and max-width only. The latter is bug in standard mode, so I tried using widthworkaround, but who has always used an attribute selector, which of course is ignored, there are no selectors of friendly quirks mode in uneditable Oracle IR of supplement.
The best 2 options are:
1. stop using IE.
2. use a theme based on standards.
Less satisfactory would be:
3. change your theme custom (or some of its pages) in standard mode (but it could break him other stuff).
4 throw some JavaScript to fix the problem (I'll sleep on this one).
Column classic report - export - not visable (APEX 4.1)
I have a problem with export to excel classic report file.
I can't do a single column to export, only that one does not work, all the other columns in the report are exported.
In the column definition value include in exports is set to Yes.
SQL query is defined as pl/slq body return the sql query.
It's report
http://www.deviantpics.com/images/2013/08/14/report.jpg
It comes to excell
http://www.deviantpics.com/images/2013/08/14/Excel.jpg
No, there is no condition on the column, I have reproduced report on the same page with the same set upward and it works on this report.
I was not able to understand why it does not work on trees report so I recreated all the columns in this report and now it works.
In addition, there is problem when I get to this site, I can not export the values. I see values in the report, but when I export them in they are not excel file.
I solved that with refresing region and submit all items that I use in this query, then all values are excellent file.
Maybe you are looking for
-
Bios update HP consumer Desktop PCs (ROM family SSID 8184)
I recently bought a new HP 260-a010 Slim desktop computer and have had only a few days. So far, the majority of the updates installed correctly, but this one, on that I wonder is to be a problem. I made 3 attempts to install, each attempt to take mor
-
How to add photos in a smart album to a book project?
I have created a book project and wanted to use all the photos I have in the smart albums. Is there a way I can import the photos in an album?
-
Tecra A7 T2500 x 1400 ATI card fan making lots of noise
Why makes the fan noise so x 1400 ati card if the power cord is being used? Without - on battery - the fan breaks down and it seems to be like my old one - tecra a4 p760. Need a special tool to turn off the x 1400? PowerSaver is not enough.
-
tried to turn on my 4 k xbr65x900a and all I get is 4 flashing red flags and rehearsals flashing all the seconds. At this point I can just unplug the tv to get rid of the flashing. any help will be great. 4 k tv bought in November of 2013
-
For the past year, I had to press the switch further and further in the bezel at the top of the page in my DV6125 Pavilion notebook to turn on my computer. It got to the point where I can no longer use my finger and have block a key or a coin on it
