column width

Similar Questions

• Column width of the mailbox in the Mail of Sierra application

  Hello everyone,

  After the upgrade to Sierra, everything went well, but a strange and annoying defect in the Mail application: I've enabled the display of three columns (mailboxes, the list of messages, the content of the Message). Well, the column of the mailbox does not keep its width, restore continuous width stretched, whenever I close the application window.

  If I expand the column to display the full name of my multiple email accounts, this preference is lost whenever I close the window. Strangely, if I exit the application without closing the window and then that I raise, the width is maintained, but it is ready to be reinstalled the next time I have everything simply close the window... is possible to make it permanent? The other two columns do not exhibit this problem and their width is however maintained, even if I close the window or quit the app...

  Thanks for your suggestion,

  Enrico

  Hi Enrico,.

  I understand that you are having problems with the column width of mailbox remaining the same size when you close the Mail application window. I use the Mail app all the time so I can understand your concern. We will be that we can do.

  Since this problem occurs in your main user account, please start the Mac in safe mode, connect as user principal and then add to your account e-mail and then test it. Once you have tested out, just restart your computer to find your main office.

  Try safe mode if your Mac does not end commissioning

  If the problem persists in safe mode, please test this point to a different user account. This will help determine if the problem is the system level or a specific user.

  How to test a question in another account on your Mac.

  Thank you for using communities Support from Apple. Have a great day.

• How to set up excel column width

  I use the ExcelRpt_SetCellRangeAttribute function to set the width of a cell in excel.

  What vale I should switch to set the width for example 50, I tried to transmit values, but his does not work.

  After passing the values'm specifying the column containing the cell is hidden.

  pls help me

  Hello!

  I modified the sample project "excel2000dem.prj" come with the installation of LabWindows/CVI to see if I can adjust the width of the column that you have requested.

  Following the partial code successfully set the column width to 15.0 points in MS Excel 2003.

  //----------------------------------------------------------------------------------------------------------------------------------------------------------------------

  #define EXCEL_ARRAY_OF_CELLS "A2:H11".

  ...

  public static ExcelObj_App ExcelAppHandle = 0;
  public static ExcelObj_Workbooks ExcelWorkbooksHandle = 0;
  public static ExcelObj_Workbook ExcelWorkbookHandle = 0;
  public static ExcelObj_Window ExcelWindowHandle = 0;
  public static ExcelObj_Sheets ExcelSheetsHandle = 0;
  public static ExcelObj_Worksheet ExcelWorksheetHandle = 0;
  public static ExcelObj_Range ExcelRangeHandle = 0;

  public static MyCellRangeV VARIANT;

  ....... (I assume that you have an open Excel application and an active workbook already)...

  {

  Get the sheets in the active workbook
  error = Excel_GetProperty (ExcelAppHandle, NULL, Excel_AppSheets, CAVT_OBJHANDLE, & ExcelSheetsHandle);
                 
  Get the first worksheet
  error = Excel_SheetsItem (ExcelSheetsHandle, NULL, CA_VariantInt (1), & ExcelWorksheetHandle);
         
  The first sheet Active - should already be active
  error = Excel_WorksheetActivate (ExcelWorksheetHandle, NULL);

  New range open to the worksheet
  error = CA_VariantSetCString (& MyCellRangeV, EXCEL_ARRAY_OF_CELLS);
  error = Excel_WorksheetRange (ExcelWorksheetHandle, NULL, MyCellRangeV, CA_DEFAULT_VAL, & ExcelRangeHandle);

  Make the range Active
  error = Excel_RangeActivate (ExcelRangeHandle, & ErrorInfo, NULL);

  Set column width
  error = Excel_SetProperty (ExcelRangeHandle, & ErrorInfo, Excel_RangeColumnWidth, CAVT_DOUBLE, 15.0);

  ..........
  }

  //-----------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Let us know if it works for you.

• adding table to the report: different column width

  Hello

  Is there a way to set different column width when the table is added to the report VI? As I understand it, the width is distributed in evently for the Table to add to the report VI.

  I have a table with 5 colunms and to set the width of each column differently for printing of the report.

  Thanks for your help

  H. Pham

  Dig into the Table to add to the report VI as a result of the entry of the column width, you will find the Table add to the report > add text table of report VI > tables.vi > Set Table column width VI. You will find a node invoke named SetColumnWidth. Simply enter the column number and the respective width for each column.

• I use windows 7. How to change and be sure the default column width in Windows Explorer

  I use windows 7. How to change and be sure the default column width in Windows Explorer

  Hi Jimsw,

  ·         If it works well before?

  ·         You did changes to the computer before the show?

  Explorer Windows will remember changed settings, check if this not happen as planned.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest running the fix of the article and check if it helps.

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Method 2: You can increase the width of the selected columns and apply the settings to all files and check.

  a. right click on an empty space in the Windows Explorer, click on sort by.

  b. now, enter the size required in the Pixel with and click OK.

  Now, click on the drop down menu to organize and click on folder and Search Options.

  Click view and click apply to folders and click OK.

  I hope this helps.

• the CSS page model: the right side column width

  Hello APEX community,.

  We're stuck in some css stuff: we want to make a little bigger right column width (say, 300px) in the apex 5.0 page template "column on the right. Could someone tell how to do that? We have already copied the page template for editing, but we do not know what css class must edit and also where to put this information in. (in the model directly? in some clean css files?)

  Best regards

  Sebastian

  SebastianScholz wrote:

  Thanks for your answer, but with that, the problem is not completely resolved. You expand the menu actions, Yes, but the area in the middle of the page (Body) will be superimposed by the column of the action menu.

  I have attached a screenshot for better reference, as you can see that the Send button is partially hidden...

  Sorry, that I had no content in this part of the screen so did not notice that. There are a few other CSS rules that have twisted:

  .t-PageBody.js-rightExpanded.t-PageBody--hideLeft .t-Body-main {
    margin-right: 300px;
  }
  .t-PageBody.js-rightCollapsed .t-Body-actions {
    -webkit-transform: translate3d(300px, 0, 0);
    -ms-transform: translate(300px);
    transform: translate3d(300px, 0, 0);
  }
  #t_Body_actions {
    width: 300px;
  }
  

• Highlighted value in table reports using html changes column width

  I use basic highlighting using raw html SQL to select a column. However, I noticed that the column width becomes very large compared to the displayed value, maybe there also took html into consideration for length? Not sure if there is a problem with the grid itself.

  for example this piece of code, see the difference in width of columns status and status_1... Ideally I would like to see the two columns of the same size as status_1.

  select case when BP.STATUS = 'LOCKED' then '<html><body><strong><font color="blue">' || BP.STATUS || '</font></string></body></html>' 
  when bp.status = 'COMPLETED' then '<html><body><strong><font color="green">' || bp.status || '</font></string></body></html>'
  when BP.STATUS = 'PROCESSING' then '<html><body><strong><font color="orange">' || BP.STATUS || '</font></string></body></html>' end STATUS
  ,BP.STATUS STATUS
  from (select 'COMPLETED' status from dual union all select 'PROCESSING' from dual union all  select 'LOCKED' from dual) bp ;
  

  Developer SQL 4.1.1

  It's an unfortunate side effect

  We could / should have code in there to set the width based on the vs html rendering the actual html source code

  but it's a development request

• How to set the column width fixed in IR APEX 5

  Hello

  Is it possible to resolve to a specific column of an interactive report on a fixed width?

  Thank you

  Jos

  Jos Dols says:

  Theme: 42

  The column value contains HTML tags, so I updated the property escape special characters No..

  However, because of the value column extends out of the window so that the user must scroll to the right to view the columns of the other/next:

  

  So I want to report column width be less than 100%.

  Add a static ID to the IR column and set the column width required using a style sheet in CSS Inline property page:

  th#static-id,
  td[headers="static-id"] {
    width: 16em;
  }
  

• How to adjust column widths individual classic SQL report

  Hello

  I use Oracle APEX v4.2 with IE8 browser and basically tries to adjust widths of individual columns in my classic SQL report. Basically, I have three columns I want to spacing, so that the width of the entire region for the report is used, but am not sure how to proceed.

  I drilled in individual columns and specified the column widths as the element, but in vain.

  Would appreciate help on how to do this for each column and hope that I do not need to change the model of report (if possible).

  Thank you.

  Tony.

  Tony F. says:

  I use Oracle APEX v4.2 with IE8 browser and basically tries to adjust widths of individual columns in my classic SQL report. Basically, I have three columns I want to spacing, so that the width of the entire region for the report is used, but am not sure how to proceed.

  There is an element of uncertainty in what we suggest as well, because you have not specified the theme and the report of model that is used. This information is required for any question of formatting or the visual layout.

  I drilled in individual columns and specified the column widths as the element, but in vain.

  Report in some themes templates may be missing in the #COLUMN_WIDTH substitution string # required for use of the declarative column widths, as shown here: Re: width of column in reports

  I don't know why it would be missing from a theme of so-called "modern" (perhaps the lack of documentation affects even the Oracle theme designers), but you can add it to the models listed in this thread.

  Width of the element applies only to controls on a form in a table.

  Would appreciate help on how to do this for each column and hope that I do not need to change the model of report (if possible).

  This can be done using selectors CSS attribute (for the themes of quirks mode non-traditional, because you are using a legacy version of IE). Add a style sheet in CSS Inline property page:

  #ALIAS,
  td[headers="ALIAS"] {
  width: 40%;
  }
  

  where the ALIAS value in the attribute selector matches the required column alias, and the width property specifies the column dimension required and the units.

  Note that the percentage widths will be compared to the width of the report table. Therefore, it may be necessary to also specify widths (100%) for the table of report and its components. Exactly how is based on the report, the region and the page templates and theme used, information that was not provided.

• Column width set to 0 when printing to PDF format

  Oracle Application Express Version: 4.2.0.00.27

  Apex listener Version: 2.0

  We have a classic report with 20 columns. Out of them, few are conditional.

  We use attributes of the print to print the report in PDF format. The problem with the PDF and printed, it keeps the column width of all the columns in the PDF file, even if they are hidden. We put the column width for all columns of 20 in the print attributes section.

  Can we set the column width to 0 in the PDF output for columns that have hidden due to the State?

  HI - so what you are trying to accomplish? The conditional columns are not included in the PDF file. And the column width for the PDF file is set as a percentage of the available space. So I guess that what you need is for the remaining columns, i.e. those who are included, to fill the available space, but is not because even if the conditional columns are not displayed, they still use place. Unfortunately, there is currently no way to conditionally set the column width, or update the width of the columns according to the conditions. You can try your own custom report layout, or use the APIs of printing for export and under certain conditions using different presentations.

  I'll take a good score to see if we can improve the logic using the layouts of integrated report to be a little smarter on the use of space when the columns are excluded under certain conditions.

  Kind regards
  Marc

• Smart see question 'Adjust column width is activated. "

  We get a question Smart view "column width Adjust is turned on. I enabled this option in Smart view, but still getting the same problem.

  This error is only coming to the office in 2013.

  
  

  Thanks in advance
  

  Office 2013 not supported with 11.1.2.3.100

  Mohan

• How to make a script to expand the column width

  Hi experts,

  Is it possible to make a script to expand the purpose of column width to let the poster any overset text columns?

  Respect of

  John

  Hi John,.

  Sorry about that, try this, it will count through all tables in your document.

  myTables = app.documents[0].stories.everyItem().tables.everyItem().getElements();
  
  for (var t = 0; t < myTables.length; t++) {
      BE_resizeColumnsToFitContents(myTables[t]);
      }
  
  function BE_resizeColumnsToFitContents(tableToEdit) {
      for (var i = 0; i < tableToEdit.columns.length; i++) {
          while (tableToEdit.columns[i].overflows === true) {
              tableToEdit.columns[i].width += 1;
              tableToEdit.columns[i].recompose();
              }
          }
      }
  

  Brett

• Set the column width in the report

  Hello

  I have a standard classic report in one of my applications.

  I want to set the width of the column of the report and but not in pixels, it should be in percentages (%)

  In the attributes report in each column, there is a column width text field, but it accepts only the pixels and percentages.

  Last Version 4.1, database 11g

  Thank you

  RameshP, OracleAPEXDeveloper wrote:

  I have a standard classic report in one of my applications.

  I want to set the width of the column of the report and but not in pixels, it should be in percentages (%)

  In the attributes report in each column, there is a column width text field, but it accepts only the pixels and percentages.

  Use CSS. Add a style sheet in the header HTML property page:

  th#ALIAS,
  td[headers="ALIAS"] {
    width: 40%;
  }
  

  where the ALIAS value in the attribute selector matches the required column alias.

  Please note that the specified percentages compared to the width of the report table. Therefore, it may be necessary to also specify widths (100%) for the table of report and its components. Exactly how is based on the report, the region and the page templates and theme used, information that was not provided.

• A gallery of fluid from MySQL using PHP and various column widths

  I decided to try the new option of fluid page layout in Dreamweaver. I pull information from a (MySQL) database and use php to present.

  To view a gallery, I pull the info and use repetition code and something as horizontal repeat of Tom Muck script to create a gallery. Images should be indicated with other text information (not only a legend). However, the script of HR is a fixed amount of columns - and I want the number of columns to change depending on the width of the browser.

  So it's more than a gallery - pulling images from a database with title = 'x' would be a stylized DIV repeated with multiple fields of texts and styles to the breast.

  For example, a site of car dealer that it must show the image of car, price, year, description etc all fonts of different style so it may just be a legend in the image.

  If the options are:

  A fixed number of columns for each width: Mobile Monitor, 5, 3 shelves, 1. This can be done by having an "IF" statement in the code, if width = x use this version of the horizontal repetition?

  A fluid version which has 6 columns and do you drag the width of the browser, you can see the Gallery less than column width until it reaches 1 for mobile.

  The fluid version would be better.

  Any link to a tutorial or an example would be most appreciated.

  Thank you very much

  HVR

  The only problem with the use of instead of a table to create columns of the grid is that you need to set a minimum height on the to keep them all at the same depth, a bit like a construction of table cell looks and behaves. If you do not set a minimum height that the grid will look all shredded MORE the very big disadvantage is that the will not clear if another

  has more content in there that's going to happen if you include a 'description' of the car because it will never be the same length unless you are prepeared to edit the text.

  See sample of fluid below: you can simply fill in the of your database and the loop through them

  

  Price

  £8500

  Year

  2009

  Description

  This is a description of the car

  

  Price

  £8500

  Year

  2009

  Description

  This is a description of the car

  

  Price

  £8500

  Year

  2009

  Description

  It is a description of the car. It is a description of the car. It is a description of the car.

  

  Price

  £8500

  Year

  2009

  Description

  This is a description of the car

  

  Price

  £8500

  Year

  2009

  Description

  This is a description of the car

• How controll in the report column width?

  Dear all,
  
  I created the classic report, but here the column width is too large.
  I want to the column width of the control in the report.
  
  How can I do this...
  
  
  Thank you

  I use Apex 3.2.

  It's a shame. Just try to change:

  Report--> Column--> column formatting attribute--> Style CSS

  for width: 100px

  Also make sure that your text to column heading to enough short to fit into the column.

  Rod West