Columns of the table must have a header, or by the attribute "headerText"...

Similar Questions

• Tables: Must have text Message box appears if the totals do not agree

  I have a table that has six columns of figures. Each column is reached. I would get a text box ("these totals must agree") to appear IF (column mouse + column Rats) is NOT equal to (column B column C + column D + column E.)

  I didn't need calculate the sum of the totals of columns, that is to say, no need to know the total of mice and rats, etc.. I just have to make sure that the number of rats and mice is equal the number of category B, C, D and E pets. And to let the form user know.

  I hope that makes sense!

  Thank you!

  There are two ways to handle this.  Normally validation of this type is made when the user has finished the form and is ready to submit.  This is because in this case, validation is based on several columns and rows, so if you wanted a pop-up for the error message box, they would get a message popping up every time a number is entered until all columns are added correctly.

  It looks not to form any kind of function submit, so I got stabbed another angle.  I've added a message that is a note and a warning below the list of categories.  This is normally visible and is hidden when the columns add up correctly.  I added the validation code in the event of page layout: ready for JustifyE since it was already used another script and it fires when you need it.

  Update form is attached.

• How to find the name of the column to the attributes of the IOM?

  What is the COLUMN_NAME for attributes 'Generated password' and 'Access Console Design' in OIM 11 g?
  Also I can't find anywhere in FormMetaData.xml. A file that represents FormMetaData.xml in OIM11g?

  Sorry

  Try USR_TYPE

• EL for the attribute 'id' to the InputText component

  Hello
  
  Is it possible to assign EL to the attribute 'id' to the InputText component?
  According to the doc ADF is not possible.
  Please let me know, if a possibility exists

  According to the doc ADF is not possible.

  According to the doc of the ADF, it is not possible. 10 points for you have answered your own question.

  Doc is [url http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e12419/tagdoc/af_inputText.html] here. Note where it says 'No' in the 'Media EL?' column for the attribute ID.

  John

• In Photoshop, how can I change the background (Mount table) from black to white. I must have hit something because it changed suddenly mid-project and I cannot find anywhere in preferences to solve this problem.

  In Photoshop, how can I change the background (Mount table) from black to white. I must have hit something because it changed suddenly mid-project and I cannot find anywhere in preferences to solve this problem.

  Right-click on the pasteboard, and you should have a choice of colours from timeline menu.

  I would add that you should have a file to open it or it won't work.

  Gene

• Columns of the table model Transformation header/footer

  Hello @all,
  I'm new to this forum. I'm now starting to use Oracle SQL Data Modeler 3.1.0 - 700
  
  I found the "Table model" transformation. I use this transformation to model my header and footer columns. How can I create columns for my header on the first position of my table? Will there be another opportunity to create a header or footer?
  
  I hope you understand my question.
  
  Thank you for the help,
  
  Max

  You can use

  table.moveToIndex(column,index);
  

  to move the column that you created in the desired position - following moves the column to the beginning of the list of columns:

  table.moveToIndex(column,0);
  

  Philippe

• How to find the names of tables that have more than 100 columns

  Hi gurus,
  
  Please help me find the names of the tables that have more than 100 columns in the database.

  Below will be useful for you.

  SELECT atc.OWNER,atc.TABLE_NAME,count(*)
  FROM all_tab_columns atc
  GROUP BY  atc.OWNER,atc.TABLE_NAME
  HAVING count(atc.COLUMN_NAME) > 100
  

  Adding another point, you can use user_tab_columns, all_tab_columns, dba_tab_columns, based on your needs/access.

  Thank you
  Suri

  Published by: Suri on February 23, 2012 11:30

• Can we have hash partition and list on 2 columns in the same table. How.

  Can we have hash partition and list on 2 columns in the same table. How.
  
  Work on 10g release 2

  # List-Hash is a valid composite partitioning strategy 11 from g.

• How to have more than 20 columns in a table in the form of adobe?

  I see that there is limitaion of not having more than 20 columns in my table in the form of adobe, is it possible that I can have more than 20 columns in a table in the form of adobe in landscape mode.

  Hello

  Which applies only to the Table Wizard. Once the table is placed on the page, you can add columns manually in the menu or by right-clicking a column.

  You can also use fields in a repeating subform (rather than the object of the table).

  Good luck

  Niall

• In setting tables, how to set the level of adjustment? I must have clicked on something because now my level of setting on the temperature of the sample is +/-5 and exposure + /-10. How can I change this?

  I must have clicked on something because now my level of setting on the temperature of the sample is +/-5 and exposure + /-10. How can I change this to her by small increments like him to be?

  Could you explain in more detail. (screen another-clip)

  0.10 your screen-clip shows exposure value is 1/10th of a judgment. How do you see the 10 stops of exposure to change?

  The Temp slider is "1" If you look at a JPG image so the cursor should go around 100.

  Based on the will of the 'Slow Down' shift sliders for a more small movement of the slider.

• Disable the column in a table.

  Hello
  
  How can I disable column in a table.
  in collaboration with 4.1 and I Assistant founded in table form.
  
  If I entered the value in a column second column must disable and vice versa?
  
  
  
  How can I do this?
  
  
  
  Thanks and greetings
  CORINE

  CORINE wrote:
  Hello
  Could you help me to write the code. My column in a table are 13,14,15,16

  If I type in field 13 then 14 and 16th column should turn off and
  If I go should disable the value in field 14 and 13 and 15 column.

  How can I do this?

  Thank you & best regards
  CORINE

  I have not tested this code; but the following may be your approach:
  In the field 'Attributes of the element' of column 13, you can call a javascript function:

  onblur = "javascript:updateCols(this);"
  

  In your browser, right click on each of your columns (one at a time) and select "inspect element" to check the attributes of the HTML element. Assuming that column in the form of your table 13 is rendered in the HTML like f13, 14th column as f14, 15 columns as f15 and 16th as f16, write this JS function in the HTML page header:

  The JS function above is triggered when the user moves out of column 13. The function then checks the length of the value entered by the user in column 13. If the length is greater than 0, it disables the columns 14th and 15th. Otherwise, it allows them.

  The code above is for your first scenario:

  If I get home should disable the value in the field column 13 then 14 and 16

  You can do the same for the other scenario.

  Hope this is clear. Or otherwise, give me access to your workspace and I try the here above.

• Trying to hide a column but the header reappear on the following pages

  Hi all

  Here is my little problem, I have a table, a bit normal. What I try to do is the following:

  I wish I could hide a full column based on the data. I was actually able to hide a column, but my problem is that when the table breaks into a second page, "header cell" on the second page of the column I hid reappear.

  Here's how I did my stash:

  -In table Initialize script, I check a condition, and if this condition is met, I'm hiding the header cell.

  If (Verif.name4_we.rawValue == "" or Verif.name4_we.isNull) then

  HeaderRow.Cell3.presence = "hidden".

  endif

  -For normal lines, I always check the same exact condition and if the condition is met, I hide the cell.

  If (data. Page1.test.Table1.Verif.name4_we. RawValue == ' ' or data. Page1.test.Table1.Verif.name4_we. IsNull) then

  .its presence $ = "hidden".

  endif

  This facility works pretty well if I only have one page:

  
  5 is my header name (I know it might be confusing, I'm sorry), it's page 1, column 6, and 7 are in fact hidden.

  It's what happens on the following pages:

  
  As you can see, only the header reappear, you can clearly see that the elements are still hidden, but because the header appear, it looks
  as there was a full column.

  Does anyone have an idea of what could be my problem?

  Thank you very much!
  Max

  Are you able to change the width of your columns?

  This is the last trip, I did:

  You must first, double-click the rule to open the palettes of drawing AIDS (or go into the top-> palettes-> drawing AIDS menu) and set the units to Points.

  You need tables and a structure, a table which will show real information and a structure that will be imported into your program with the correct width (column DialogResult.Cancel will have a value of 0.001 in the structure). The structure is hidden in the page layout.

  In your table initialize script, write something like this:

  Set the width of columns by using our structure.//Empty imported have a width of 0.001

  var width = Concat (data. Page1.struct.Col1, "pt."

  data. Page1.struct.col2, "pt."

  data. Page1.struct.col3, "pt."

  data. Page1.struct.COL4, "pt."

  data. Page1.struct.col5, "pt."

  data. Page1.struct.col6, "pt."

  data. Page1.struct.col7, "pt."

  data. Page1.struct.COL8, "pt."

  data. Page1.struct.col9, "pt."

  data. Page1.struct.col10, "pt")

  Table.columnWidths = width

  Explanation: You concatenate each rawValue of your table that contains the width of your columns with "pt" (the unit), in this way, you can set the widths of all columns in a single command (Table.columnWidths = width).

  This should resize the entire column, including the header. (It works on my side)

  Don't bother to ask if you have any other questions

  Max

• How can, during the collection of data, start a new column in my table every 100 data points?

  Hello! I have a problem with my data - I get in a wide range of 1 x 1000, but it's the repeated measures, each taking about 500 data points. I want to break this table for this data string start a new column in my table every 500 points given. I don't know how to do it-please help!

  datacompiler100 wrote:

  Hey thanks for the sponsor and the first off I must apologize for the State, I am attaching my VI. I put the part of the VI that I am working on (my team has access, so didn't post everything here) and also attached the data file (when just written in a spreadsheet file, not through the attached VI). I want to convert the long row of data and then start a new column every 50, 100, 5 points (user-defined).

  Using the data from the file, you can reshape everything simply (as you already!), followed by transposition (since you want columns instead of rows). 2D arrays must always be rectangular, so the last column is filled with zeros if necessary. Is that what you want?

  

  Of course if you try to add a new column in a file, that will not work. You can only add lines in an existing file because of the way the data is organized. To add columns, the entire file must be read, intertwined and all re-written new data in the file.

• How to write express line and column of the tables headers to a file

  HI guys, I work with that express table and display data using the express table. What I want to do, is that when I press save button results data in the specific table must be written to a text file. I am able to write the text file, but only the data is written. Y at - there a possiblity that I can also write lines and column headers and the data in the text file. Kindly guide me in this regard as soon as possible. I enclose the image also. Please watch this and guide me.

  Cordially Ehtisham Safdar.

  Hello

  Sorry for the late reply. Here is the VI, I hope it works for you. Rather than each element of the index and the addition of the row header, take advantage of the available icons and play with the nodes of property for a good solution.

  Concerning

  Gaze

• [OBIEE 11 g] Create customized to group columns in a table view column header

  Hello world

  I got a requirement to group certain columns in the table view with a custom column header name (for example to create a two-level header).

  The layout I have now:

  [Jan]     [February]     [Mar]     [Apr]     [May]     [June]     [Jul]     [August]     [Total sales]

  -----------------------------------------------------------------------------------------------------------------------

  1          2          3            4          5           6           7          8           36

  The layout I want to achieve:

  [                  Q1                    ] [                   Q2                   ]    

  [Jan]     [February]     [Mar]     [Apr]     [May]     [June]     [Jul]     [August]     [Total sales]

  -----------------------------------------------------------------------------------------------------------------------

  1          2          3            4          5           6           7          8           36

  I use Table View, is it possible to get the above provision? Any comments appreciated. Thank you.

  See you soon,.

  Kayip

  Hello

  It is a simple parameter, it is unpacking already...

  

  The property "of the topic folder" of your columns allows you to enter the required text.

  PS: Do you really have columns in your field with the name of the month? Is it not something better managed with a hierarchy of real time and using a pivot to display the month columns? In this case the grouping of quarters is already there...