com.hyperion.planning.Invalid Exception of username: user hypadmin does not ex

Similar Questions

• When you try to use the repair your computer from the advanced boot option option, it only shows a different user account and my username and password does not work

  Original title: when you try to use the repair your computer from the advanced boot option option

  When you try to use the repair your computer from the menu option options advanced startup, when it comes to the screen to select the user account it shows only a "another" user account and my username and password does not work, and the 'OTHER' this account is not on my list of user accounts... what should I do?

  Hi kennympeek,

  1. why you try to do the Startup Repair?

  You can try to perform the commissioning of repair using the audit and the disk Installation of Windows Vista.

  For estelle information links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope this information is useful.

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Active Directory users & computers does not open in MS Server 2003 Enterprise 64-bit?

  Hello

  Active Directory users & computers does not open in MS Server 2003 Enterprise 64-bit?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Possible error with module GWT.xml file. The value of time compilation agent user (ie6) does not match the value of user.agent (ie8) run time

  Hi there... How can I sort this problem as this message looks back constantly on google Account... ERROR POSSIBLE WITH GWT. The value of time compilation agent MODULE XML FILE user (ie6) does not match the value of user.agent (ie8) run time

  Hello nEve Adam,.

  Thanks for the return of the response.  Below, I've added some links Google support on this issue.  I hope this helps.

  ERROR: Problem Possible with your *. GWT.XML file module. The value of compile time user.agent (opera) does not match

  http://www.Google.com/support/forum/p/blogger/thread?TID=2d6d9bd1326a07c4&hl=en

  In addition,

  Message from Web page

  http://social.technet.Microsoft.com/forums/en-us/ieitprocurrentver/thread/53194559-306a-4ffc-a614-4bac817f178d

• my user profile does not load correctly

  my user profile does not correctly load system continues to connect with a temporary file. All I had on my screen disappeared! How can I get that back as it was? I tried to restore to an earlier time, but no luck.

  Hello

  Check this box:

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Does that help?

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• The user profile does not

  Windows vista user account does not

  ·                         Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• User profile does not load correctly, the user could not be connected.

  I tried to login to my account to administrator with my correct password and it says "user profile can be connected, user profile does not load correctly ' or something to that effect. Even when I login as a guest and enter my admin password on the user accounts settings and click ok, it won't let me access or modify accounts. Please help me, I am not able to access one of my documents or pictures of my guest account.

  ·                         Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• Yosemite user model does not

  I have 20 macs in a University laboratory image in the same way, with a user model that I created.  Worked fine for several months.  Lately, the chances that my user model does not load correctly is 50-50.  This takes the form of:

  • the loading dock is generic and does not include my shortlisted apps
  • wallpaper is the default 'Yosemite' image and not the wallpaper that I created
  • or, the mounted drives are not displayed on the desktop.

  

  Pictured above, the bottom image is what I call a wrong profile.  It is in this profile, you can see that the dock, HDD and wallpaper are not loaded; However, things like the Finder and Safari open to the correct location, based on a template.

  I can log in and out of the same machine all day and arrive at a 30 to 50% chance of the model charge properly.  However, I need this number to 99.9%

  Our laboratory is partially controlled by JAMF/Casper to load scripts at startup.   These logon scripts in the form of:

  • load the customer print PHAROS
  • load a "alert of emergency of the University" application in the dock
  • If the user has a folder on our server, xsan, Casper Mont scripts this folder on the desktop (this feature works on our Mavericks stations, but is broken in Yosemite).

  What process occurs when a user connects and the model is pulled?  Is it possible that Casper connect you scripts could be in conflict with the creation of models of the user?

  Solution: The question is a folder called Non_localized, reflect the English.lproj content with this file in template/User.

• I am the administrator on my pc. and my user profile does not load.

  recently, when I connect I get a message saying that the user profile does not, or will not, support. How can I fix it? Be admin, I can't make all the changes that my profile does not load. I can connect with my husband and children, as their loading user profiles, but, when I try to make changes and type my password properly, it won't connect so I can't do anything! Help! Thank you!

  Yes, you will lose everything when you re-install.

  If you are able to logon to an account that can back up personal files as much as you want to keep on an external hard drive, or Flash drives or DVDs.

  You will need to re - install all the programs you already have installed.

• I work to integrate AD with ADC, but there are a few users that does not appear on the ADC. Someone knows why?

  I have an ASA 5515 with module CX and I m trying to configure rules based on users of the AD. I have instaled CDA (context Directory Agent) and is integrated with AD and module CX and ASA and I have also set up rules on the ASA and module CX and works well. The problem I have is with users who does not appear on the ADC. When the user is on CDA is OK. But I should have more less 250 users on CDA and I only 171. I restart PC users doesn´t appear and after reboot, some users appear and others do not. Anyone know why this behavior?

  rgoncalves

  You can check a few things? Software version CX and your version of the ADC? Also do you have more than one domain controller in your environment? Also what version is DC?

• I want to install a trial version of indesign CC but the username and password does not work. Is my username and the same password I use to connect to Adobe?

  I want to install a trial version of indesign CC but the username and password does not work. Is my username and the same password I use to connect to Adobe?

  I work on a Mac computer

  Hi Tania,.

  He could be induced to Mac username and password.

  Kind regards

  Sheena

• User ID does not appear in the list of recipients iBot

  I want to send a user an iBot, but this person's user id does not appear in the list select the recipients.
  
  Where this list is generated from? Also, how to make the id of the user appears in the list?

  Hello

  The user must be connect once at least.

  Go--> Ibot--> beneficiaries to choose--> here not able to see the id of the user. Please check it publish to subscription below choose the recipients (here also not able to find the user).

  Note: Try connection surely meets this user on time you will get id user here.

  Hope this helps

  Thank you
  Satya

• ORA-01918: user 'APDBA' does not exist

  Hello, I have the following statement
  

  CREATE OR REPLACE FUNCTION APDBA.MUNIN_TBS_PCTUSED1
  (
    tablespace IN VARCHAR2 
  ) RETURN NUMBER AS
  A NUMBER;
   
  BEGIN 
    SELECT round(100*(sum(bytes)/1024/1024)/(sum(maxbytes)/1024/1024),1) INTO A
    FROM dba_data_files
    WHERE tablespace_name = tablespace;
     
    RETURN A;
  END MUNIN_TBS_PCTUSED1;
  /

  The problem is that the APDBA user exists in the database and I get the error ORA-01918: user 'APDBA' does not exist
  
  Thank you very much

  Hello again,

  As said, there are a few false given ORA-01918-related bugs.
  Your version seems to fit these, but you did not provide enough information to give the exact answer suffer you from one of them.

  There is no point in us trying to solve this problem, you must open a SR with Oracle.

  Concerning
  Peter

• com Apple.Preferences.Users.RemoteService does not not el capitan

  After the installation of El capitan (10.11.1), I'm removing a user. Then went into System preferences-> users & groups, and then unlocked and chose a user from other users of the section and clicked on the icon less below. After that, the system preferences panel is stuck and I couldn't click on the buttons there. Go to activity monitor, I noticed the "com.apple.preferences.users.remoteservice" process does not.

  I have to force kill that process or force the system preferences to quit smoking.

  How do I remove a user?

  If you haven't already done so, restart the computer and see if there is no change.