Updated Windows 7 not work & Service record is missing or damaged

Similar Questions

• Windows failed to load because hal is missing or damaged

  I can't start my computer because its telling me that windows could not load because hal is missing or damaged. I tried to fix it by installing the cd to repair, but I can't restart the computer. I tried to choose different options in the menu of options advaced bood, but he always tells me the same message "windows failed to load because hal is missing or damaged. Help do not know what else to do!

  Hi Dimples328,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 2: I suggest you try the steps from the link below and check if it helps.

   

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Let us know if that helps.

• Windows xp has been partially updated and may not work perfectly

  To install the 3 XP SVC pack... Neede Svc Pak 2 do following error Yes, obtained by attempting to do so.

  Windows XP has been partially updated and may not work perfectly

  Hello

  -You installed correctly updated recently?
  -You are aware of any changes made on the computer before this problem?
  Method 1: I suggest to maintain the computer in clean boot mode and check if the problem still persists.

  Step 1: Clean Boot Mode
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, refer to clean the start link to configure the computer to normal startup mode.

   

  Step 2: Manually disable the Antivirus

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 3: Install Service Pack 2 (SP2)

  http://support.Microsoft.com/GP/xpsp2getinstall/ja

  http://support.Microsoft.com/kb/875364

   

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

   

  Include to determine which SP1 is installed

  http://support.Microsoft.com/kb/310104
   
  Method 2: Follow the steps mentioned below and check if the problem persists.
   
  Step 1: Microsoft Windows Update Agent tool
  How to get the latest version of the Windows Update Agent?
  http://support.Microsoft.com/kb/949104
   
  Step 2: Try to install the updates and check if the problem persists.
   
  Method 3: Try to download and install the Windows XP SP2 and SP3 manually and check if the problem persists.
  For Windows XP SP2:
  Windows XP Service Pack 2 network installation Package for IT professionals and developers
  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=28
  For Windows XP SP3:
  Windows XP Service Pack 3 network installation Package for IT professionals and developers
  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=24
   
  Hope this information helps.

• My product key on a new installation was invalid so then I activated by phone... now when I use windows update it does not work correctly

  My product key on a new installation was invalid so then I activated by phone... now when I use windows update it is not working properly because it says that I don't have a genuine copy of windows... But it seems that the updates don't come down... is it ok to work this way?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
   
  Windows security updates will continue to come down the pipe under automatic updates, but you cannot access the General updates until the system to validate.

• Photos may not be printed as a service that needs Windows does not work

  One morning last week when we turned on the conputer lots of things had changed.  I finally got my page online straightened out, but I could not print photos that were stored in the computer.  When I tried I got the message "Photos cannot be printed because no printer is installed or a service that needs Windows does not work.  And I wasn't able to print with my camera card inserted in the printer. I was able to print the text so that the printer is of course.  Can you help me?  I must add thaat I was able to print photos using the map to a pharmacy machine then the card is OK.

  Wendell Bard

  Hello

  1. What is the brand and model of the printer?
  2. you remember to make changes on the computer before the show?

  Method 1:
  You can perform troubleshooting of the printer and check:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  
  Method 2:
  If the problem persists, you can perform a restore of the system to the point when it was working fine and check:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  You can also check out the link:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  For more information, please see the link below:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• Updates Windows has stopped working for months in a row

  For the fourth month in a row updates windows has stopped working. When I use windows update troubleshooting get error 0 x 80070005(2016-07-13-T-02_20_41P).

  Tried to use windows update reset. I get the message, could not reset windows update due to the failure to stop bits service.

  Laptop HP 365

  Windows 7 Home premium

  I hope not. Unlike the last days of patch, KB3161608 is not an inescapable problem in preinstalling. It is a real solution. :)

• Windows aero not working not

  well my computer was fixed is not if a long time and when I got back most of the things worked very well, but the windows aero and some other stuff windows did not work how can I get the fi back aero theme is not in the choices when I go to customization, I have a dell inspiron 1545

  well my computer was fixed is not if a long time and when I got back most of the things worked very well, but the windows aero and some other stuff windows did not work how can I get the fi back aero theme is not in the choices when I go to customization, I have a dell inspiron 1545

  2 suggestions:

  1 here is a link to Microsoft FixIt:
  http://support.Microsoft.com/GP/aero_effects_not_working?EntryPoint=WHHT

  2. If the method above does not work, try this...
  Start button > Search box, type services.msc >enter key > scroll to find
  Desktop Windows Manager Session Manager. Under status, it must bestarted. Under Type of Stratup, it should be Automatic.
  Scroll to THEMES. Under status, it must be started. Under Startup Type, it should beAutomatic.
  If they are not, RIGHT click on them, make changes on the next window.
  Click OK when finished.

  t-4-2

• Updates that do not work... (66A error code): KB2518870 and KB2478663

  original title: updates that do not work...

  Hello! I try to install 2 updates for my Windows Vista and I have always this message: Code 66A Windows Update encountered an unknown error...  Can you help me?

  Hi JoannieGrenier,

  Thanks for posting your question in the Forum of responses of Micrsoft.

  Follow the troubleshooting updates the steps described in this document to resolve the problem with the installation of .net Framework.

  If your prefer assistance in French, see the message below:

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

• Video preview of AE cs6 window does not work.

  If the after effects cs6 preview window does not work. It shows just the black screen. I need quick help.

  The example PIC: http://gyazo.com/d1219b0b95d7b2bd59e0980506db7c95

  Why am I not surprised? Yes, the effin ' mess they made with the OpenGL drawing. To update your graphics driver and configure it properly. If it is supported, it should work, otherwise the program will / should turn off automatically. Trash the prefs after the pilot started day so AE scans again.

  Mylenium

• I have windows xp I deleted rundll32.exe now my windows will not work please help.

  I have windows xp. I some how deleted rundll32.exe now my windows will not work or open. system restore not working anymore.

  http://www.computing.NET/answers/Windows-XP/deleted-rundll32exe/168958.html

• Defender of the window does not work.

  I recently had the Vista antispyware 2012 the virus.  I was able to get rid of it, but now the Defender window does not work.  When I click on the icon I get a pop up msg: "failed to initialize: 0 x 80070006.» The handle is invalid. "How to operate?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/why-does-my-Windows-Defender-not-work/a9c81020-cf8d-4149-8B4B-bc059ecf500a

  But you should also read this:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/Windows-Defender-and-Microsoft-Security-Essentials/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

  Norton, AVG and McAfee, MSE will disable Windows Defender for dreaming of potential conflicts with their respective programs.

  I hope this helps...

• I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/

  If this fails, attach a screenshot of the error message if it is in English.  otherwise, quote it.

• Update/install updated C3 does not work

  Update/install updated C3 does not work.

  Computer is an Apple C5 Desktop OS 10.5.8, Dual 2.7 GHz PowerPC, 3.5 GB of DDR SDRAM.

  I use applications Adobe C3, which now requires updates.  When an Adobe product needs an update, an update notification dialog box appears.  I click ok to download and install the Adobe updates to all my products.  I saw preferences indicating the C3 and a number of other applications.  I click on continue and the download begins.  Installation does not seem to happen or at least it is / was no indication except noting a percentage of completion passing.

  The problem is that this process continues and continues and continues during and in the course of every time I clicked on continue.

  When I could see the preferences once, I deselected all downloads there.  I then clicked on continue.  Unfortunately, the process has continued and continues and continues whenever I clicked on continue to download, but not to the best of my knowledge.

  There is no error message.

  This problem occurs for every download of the update.  I have to click Cancel to stop this process so that I can continue work on computer.

  Help, please.

  Bud Willner

  Many gave to the buggy auto update and go to the page updates, get them from there and run them locally.

  http://www.Adobe.com/go/gntray_dl_updates

• This update of the 7 week window do not work

  This week I have 3 update for Windows 7 pro, but ther are not working
  every time that I have try tell me to reboot is not to stop computer as update are installing
  evil
   
  Bring it to 14% so tell me it failed and goes back to the old ver of window before the update
  I try it a few times now with the same result, and once he scare the _ out of me like he jam just your job don't move any of this because of their update
   
  updated IE8 KB978506
  Windows 7 KB976972 update
  update of window 7 KB 977074
   
  something is very wrong with them to update

  Well I finally got the update no work - no thanks to window update - after is not bad some time I tried to download all 3 at the same time, but that did not work well seem ther love to be installed one by one - out further and it works after a lot of testing

  I've opened Incident of Service Support Microsoft online

  and here what ther me has said - but not a bit of it worked for me

  Microsoft online please contact the Support Service.

  From your description, I understand that there are 3 updates failed to install. If I misunderstood your concern, feel free to let me know.

  I understand the inconvenience that this matter has caused. Rest assured that I will do my best to help you solve this problem.

  This problem may be caused by the following factors:

  1. some third-party programs affect.

  2 corrupt Windows Update temporary files.

  In order to narrow down the cause of this problem and solve it, please refer to the following steps. After completing each step, please check the result again on the Windows Update Web site.

  NOTE: Some third-party programs can affect the Windows Update service. If you run third party applications such as web accelerators, Internet or Spyblocker (programs designed to improve the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend temporarily disable us or to stop and then try to access Windows Update later, please understand that we are disabling these programs only for troubleshooting purposes and we can re-enable these programs after that we finish troubleshooting.

  Step 1: Clean boot

  ==============

  This method will help us determine if this issue is caused by a loader program or service. Please, perform the following steps:

  1. click on the "Start" button, type "msconfig" in the search bar and press ENTER.

  Note:, please, click on continue if the "User Account Control" window appears.

  2. click on the 'Services' tab, check "Hide all Microsoft Services" and click on 'Disable All' (if it's not gray).

  3. click on the 'Startup' tab, click 'Disable All' and click on 'OK '.

  Then, restart the computer. When the "System Configuration utility" window appears, please check "don't show this message or launch the system.

  4. check if we can upgrade the system to boot.

  Note 1: Temporarily disable the startup only, group prevents the loading at startup, startup programs. This should not affect the system or other programs. We always run manually these programs later.

  Note 2: We can check on start up Normal in the general tab to return to the Normal Mode after that we get this issue is resolved.

  If the problem persists, please continue to try step 2.

  Step 2: Rename the folder C:\Windows\SoftwareDistribution Windows Update

  ================================================

  This problem may occur if the Windows Update, software distribution folder was damaged. We can refer to the following steps to rename this folder. Please note that the file will be re-created the next time we visit the Windows Update site.

  1. close all open windows.

  2. click on the "Start" button, click "All programs" and click on "Accessories".

  3. right click on "Command prompt" and click "run as Administrator".

  4. in the window "Administrator: command prompt", type "net stop WuAuServ" (without the quotes) and press ENTER.

  Note: Please look at the cmd window and make sure that it is said that he was arrested with success until we try to rename the folder. However, if it failed, please let me know before you perform other measures and include any error messages you may have received when it failed.

  5. click on the button 'Start' in the 'Search' box type "%windir%" (without the quotes) and press ENTER.

  6. in the opened folder, find the folder named "C:\Windows\SoftwareDistribution".

  7. right click on the folder, select "Rename" and type "SDold" (without the quotes) to rename this folder.

  8. still in the window "Administrator: command prompt", type the command "net start WuAuServ" (without the quotes) in the window to restart the service Windows updates.

  Note: Please look at the cmd window and make sure that it says it has successfully launched. However, if it failed, please let me know before you perform other measures and include any error messages you may have received when it failed.

  If the problem persists, please collect the following information for further research.

  How to capture a screenshot

  ======================

  1 when the error appears, press print screen (print screen) on your keyboard.

  2. click on the "Start" button, type "mspaint" in the search bar and press ENTER.

  3. in the Paint program, click on the "Edit" menu, click "Paste". Click on the "File" menu, and then click "Save".

  4. the dialog box "Save as" appears. Type a file name in the "filename:" box, for example: "screenshot".

  5. make sure that "JPEG (*.)" JPG; *. JPEG; *. JPE; *. JFIF)"is selected in the box"Save as type", click on"Desktop"in the left pane and then click on"Save ".

  Please send this JPEG file to my email

  How to retrieve system information

  =============================

  System information can provide us with more information about the current state of the system. I would check for you. Please send it to me using the following steps:

  1. click on the "Start" button, type "MSINFO32" in the search bar and press ENTER to start System Information.

  2. on the pop-up window, in the menu bar, click on 'File' and click on 'Save', type a file name and choose NFO as "Save as type", click on "Desktop" in the left pane and click Save.

  Please send it as an attachment for further research.

  How to recover the WindowsUpdate.log file

  ================================

  1. click on the "Start" button, type "WindowsUpdate.log" (without the quotes) in the search bar and press ENTER. We will see a file named "WindowsUpdate.log".

  2. now click on the 'File' menu and click on the "save under".

  3. in the left pane, click "Desktop" and click the "Save" button.

  The file will be saved to your desktop. Please send the file

  Note: When you attach files to emails, the process will vary depending on the used e-mail application. While you compose the message, the most applications will provide you with a 'Join' button or paper clip icon click to attach a file. After clicking on this button/icon you need to navigate to the file you want to attach and select it by either double clicking on it or by clicking on it once, then clicking on the button "join".

  If please try my suggestion and let me know the results soon. If you have any other questions, feel free to let me know.

• File server for Windows does not work after security update

  I just upgraded the security update that was released last week and all of a sudden the computers windows cannot access the server. I'm under 10.11.6 and everything was great until we started windows computers today. They can ping and access the internet, but they cannot access SMB on the server.

  Macs have no connection problems in the SMB and AFP.

  Any ideas, what has changed? Users of server are all still there and it seems like it should work. I can access the web page of servers too.

  Make sure you are including the domain in the user name when signing in. for example USER: groupe_travail

  Also, check that your windows machine has the correct set of LM compatibility level. For El Cap servers must be set to 3.

  Follow the instructions below to change the Windows security settings to allow Windows SMB connections.

  1. Click on the Start button and in the bottom search bar, type regedit . Select search results regedit and the registry opens.
  2. Using the folders on the left side of the screen, navigate through the tree to the following location: \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
  3. In the right window, find the following DWORD value: LmCompatibilityLevel . If it exists, double-click it and set the value to 3 (in decimal).  If it does not exist, right-click in an empty space in the right part of the window and create a new DWORD value called LmCompatibilityLevel and set its value to 3 (in decimal).
  4. Restart the computer.
  5. Re-try to connect to the server via the workstation.

  NOTE: The versions Home of windows may not the ability to set the LM, and unfortunately I have not found a way around that.