Combining a WD N900 router and a Linksys E1200

Similar Questions

• Can someone help me to establish a wireless connection with an Android Cruz Tablet and a Linksys router?

  I have a Linksys WRT54G2 V1 and received a Velocity Cruz T301 and cannot figure out how to configure this wireless, I don't have the cd or the manual that is supposed to come with her. Any ideas on how to solve this problem? I've got Linksys plugged into my desktop ok, but when I try to access the installation page that says let him the empty user name and use admin as password should it take me to the installation site. That is not the case, that is to say invalid.

  Tablet turns on fine and shows different connections wireless with little locks on them. The 1st time I tried to set up a connection, he showed with others, but it has a lock on it and wants to know the password. He used the name of my computer not the Linksys.

  My computer is hooked on one of the 4 ports and says that I have excellent connections. There is a Linksys right below that, but he said connection is bad. It is not locked, but is not strong enough to get even on the tablet of the Cruz connection.

  Now I know why I've always had wired connections, cause it makes me crazy. If anyone can help I'd be very happy. If only I could get across to the top of page the things would be very different, I'm sure, but it is just let me access it. I tried 3 different browsers. My computer Windows Vista on a Dell vostro 220 desktop is connected to the Linksys router and works fine.

  Hello

  Please see the link below.

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

  I suggest also please contact the manufacturer of the Tablet for assistance.

• I bought a wireless linksys at a friend's router and I need help

  Hi the router's model #: WRTP54G and I'm connected to the internet right now with her via a wired connection to my pc.

  But when I try to put my PS3 wireless wonder a WPA - PSK key, and my friend doesn't remember the key.

  Is there a way I can put in my own.

  I try to go on 192.168.1.1 and internet Explorer can't find the page, so I tried 192.168.15.1 and I get the Linksys page

  I wonder username and password, leave the empty user name and password, I type admin but it tells me I can't leave username

  empty.

  What can I do?

  Thanks in advance

  Put the username and the password as "admin" in the lower case. This should work if the router password has not been changed. If this does not work then, you need to reset your router and the re - set...

• I have a desktop with windows 7 and a linksys E1000 router and you want to connect a laptop with windows 8, it will work router?

  I have a desktop with windows 7 and a Linksys E1000 router and you want to connect a laptop with windows 8, it will work router?

  Yes, it should work perfectly, if wired (Ethernet) or wireless.

  Click on the network icon in the Notification area

  Click on the available wireless network that you want to connect

  In the list of available wireless networks, click a network, and then click on connect.

  Some networks have need a network security key or password. To connect to one of those networks, ask the network administrator or service provider for key security or password.

• Cisco linksys router and cannot access the wireless network

  We have cisco linksys wireless router.  When we installed everything first, we could connect our wireless laptops to the network.  Now, however, the network is detected, but there is no access to the internet.  We have even a guy from ATT were out and he said that the wireless router has been installed backwards?  He installed a dsl fast access on our laptop icon, and now we can access the wireless network but only if we connect as the first.  We can also connect iPod to the wireless network.  They detect the network, but when we enter the password cannot connect.

  Hi JC_3094,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you aren't able to access the Internet.

  The likely causes of this problem is if the router is not configured properly.

  Here are some steps that should help you to solve this problem.

  Method 1:

  Check if the router is configured properly to get access to the Internet.

  Method 2:

  Try the steps mentioned in this link and check:

  This tutorial is designed to help you identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows.

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

   

  If there is a frequent disconnection try to update the firmware on the router and check.

   

  In addition, visit these links for more information:

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  Hope this information helps. Respond us if you have any questions with windows and we will be happy to help.

• I have reset my etec router and now I can not past the prompt 192.168.1.1. My pc is 8 years old and very, very slow

  I tried for two days now to restore my internet connection.

  I tried for two days now to restore my internet connection.

  192.168.1.1 is probably access your router's IP address and it could be a Linksys.

  If you reset your router, we help can'r you. You will need to access the router and configuring PPPoE username and password.

  Call your service provider.

  Why in the world would you reset your router if you didn't know how to put in place a new or know what to do then? It's like taking something apart and not knowing how to wind again.

• I can't connect to my router and my system XP Pro/SP3 has NOT installed the automatic Wireless Configuration service. How can I get that re-installed?

  I have the latest driver for my Linksys WPC54GS PCMCIA card. The Linksys software does not support WPA security, which supports my rout (and I do not want to use WEP).  The zero wireless Configurator, this is what I need, but the service is not installed on my Windows XP Pro w / SP3 System.

  Hello

  You need not be. I posted a link to google cache, so keep scrolling down, the answers are displayed below. It contains details on the manual creation of the registry key for the zero configuration service.

  You can also export to a working system.

  See you soon.

• Could get a new router block printing? We had a lot of problems with the computer in the last week and a half. Bought new router and now the printer does not print. :-(

  (1) we went to DirecTV. Then the same day, our internet computer is down. I asked our current provider, Suddenlink, to let them know we had them to another - but we wanted to keep for the internet.

  (2) called DirecTV to investigate why our internet went down at the same time they installed? They said that they did nothing to cause that. We waited 5 days to make out and also install the third TV that was promised. The second tech gave things a lookover and said, once again, that there is nothing unusual during their passage to cause the problem.

  (3) called Suddenlink. They said it was the router. Called the people of Netgear. They said that the router was too old. We needed to pay an exorbitant sum for support and when I told him I'd rather just buy a new router and get free technical support for 90 days... and I personally do not have the credit cards in that time. (it's my mother s equip and I wonder it for the computer) when the guy told me that he could help and hung up on us, even though I was pleading for him to wait until I put my mother on the phone. (I'm in my 40s... not a kid).

  (4) Suddenlink called a few days later, when we got a new router (netgear brand NO!) Installed and I noticed that the 'ready' light was not 'on' on the modem. Their technology has said that he would check and call us in a few minutes. He did not.

  (5) the next day I called Suddenlink AGAIN. This time, I got a really nice customer service agent. She said she would send someone to check on it. It turns out that they had disconnected when I had called to pass only the TV.

  (6) in any case, we are finally online... only now... I can't the printer to work. :-(  This has worked before.  Could it be caused by the different router? I don't know about these things. I didn't even know what it was until someone at Radio Shack has explained to me. (I was not about to buy one at Wal-Mart - these poor people). The printer is a Canon Pixma MX340. We love him. The only thing is that it is difficult to clear the tasks or to reset. The only way to really do that is to simply pull the plug, unfortunately and restart the computer. But hey, it's a great printer, better than HP.

  We are under vista. The router is a Linksys wifi (which we have) N300 model E900.

  Of course I appreciate any help you can give. God bless you!

  Michelle and Ruth.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problems with the printer in Windows Vista.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the steps in the link.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• Reserve an IP address on a router from Linksys E1200

  Hi, I'm putting our Outback Mate 3 controller with a fixed ip address and the port forwarding on a router Linksys E1200.  So we can check on our wide network remotely.  I put in the DHCP reservation page and enter the ip address and mac address but when I go to save, it shows the hexadecimal value is incorrect.  Configuration of the IP address on the 3 Mate, it can only 192.168.001.xxx and reserving the address on the Linksys, it only allows reserve 192.168.1.xxx.  These are not values?  Any advice?

  Yes, they are the same. If it shows the hexadecimal value then most likely there to talk about the address.which of mac is in hexadecimal. Make sure the format matches and no additional spaces etc.

• Router and Modem terms as device NAT Double - Solutions?

  Two questions I have about DSL/PPPoE

  (1) look in these forums, it is said that if you have a DSL modem, then you need to change your IP 192.168.2.1 could someone tell me why just for my own knowledge?

  (2) another question I have is what I use PPPoE if I have a DSL modem? Changing automatic DHCP to PPPoE willl solve my problem with my xbox not finding online games?

  (3) what I need to change my router in Bridge mode and is the same thing as mixed? If not how can I change due to bridge mode I've read that my router and modem are could act as a double NAT that could cause problems for the xbox?

  Any help would be welcome because I don't have any idea how to solve this

  Problem solved! Combination of mode Bridge and address static ip assigned to the xbox. Thank you guys

• Can ping the router and the computers to the network, but not beyond router

  I have 2 computers in linux and 3 Windows XP computers.  All can ping the router and inside my network.  Anyone can browse the internet.  None can ping outside my network (google.com or its IP address) if connected directly via the switch or router.  Traceroute shows stopping at the router.  Router firewall is disabled.  Ping on the router tool not working anymore. Linksys WRT54G Router is and I've just updated to firmware 4.21.1 but the old firmware is has never worked. I use 192.168.1.1 for the router.  Linux has some IP fixed all the other usind DHCP.  ISP is a provider of mobile phone to the modem.  Just like cable or DSL, I guess.  I've looked everywhere with no solutions.  Anyone have any ideas?

  Yes, contact your ISP to get it resolved.

• I just installed an airport extreme router and WiFi works, but the status light still flashes.

  I just installed an airport extreme router and WiFi works, but the status light still flashes.

  Open airport utility... Click EI... and see what the cause of the problem. It will give the list of questions on the summary page. Click on each of them and he will offer you even solutions.

  for example the firmware needs to be updated... nothing major... or DNS is wrong or double NAT...

  Without our crystal ball, we do not know what is the issue.

• I just upgraded to a pace 5268AC router and can connect is more to my Airport base station. It does not appear in Airport utility. Any suggestions?

  I just upgraded to a pace 5268AC router and can connect is more to my Airport base station. The base station does not appear in Airport utility. Any suggestions?

  Whenever you change the modem or modem/router to which the airport links... or... change your Internet connection process, the airport must be reset to the default settings and then set it up again to work with the new device.

  Your message did not mention if you did that, but if not... to perform a Hard Reset on the router of the airport would be the first thing to do, to follow in setting up the airport once again, just as you would if the airport was new and connection to your modem/router for the first time.

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• Bridge mode... Router and TC

  My internet does not work if I have my xfinity on bridge mode router and my TC on mode bridge?

  Bridge on the modem/router and Bridge Mode on the TC will not work.

  Xfinity modem/router must be configured as a modem only simple only (in bridged Mode), and the TC must be configured in router Mode of DHCP and NAT

  or

  Xfinity modem/router must be configured normally as a modem/router, and the TC must be configured in Bridge Mode