Combining AIRHelp to help Help Viewer Wizard of RoboHelp 8 does not work.

Similar Questions

• Shortcuts mouse to "Open the link in a new tab" help "Middle-click on the link" does not work on 10.0.1

  Shortcut of mouse to "Open the link in a new tab" help "Middle-click on the link" does not work on 10.0.1, it worked on version 9.0.1.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Help with the Printer Spooler service does not work error

  How can I fix printer service spooler does not work error? My two printers won't work now, and re - install the printing software produces error messages. Tried to use microsoft fix - it for printers without result.

  Thank you.

  Hi elvenlord21,

  See the article below which has some useful suggestions to fix the print spooler error.

  You cannot add a printer and you receive Printer Spooler error messages in Windows XP
  http://support.Microsoft.com/kb/324757

  See also:

  Error message when you use the Add Printer Wizard: "Operation could not be completed.
  http://support.Microsoft.com/kb/314876

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help.My HP8660 all-in-one does not work correctly.

  When I use color scanning and copying, the book came out with a lot of vertical colored lines. But it works fine if I copy in black and grayscale scanning.

  

  Hello

  Try to connect the printer directly to a wall outlet, remove any strips, surge protectors, extensions, etc...

  This is likely to happen due to power problems.

  If this does not help, try following these steps:

  http://support.HP.com/us-en/document/c04422559/

  Shlomi

• Help... Cs6 Illustrator does not work... lack of plug-ins?

  Hi, HELP! I have a problem with my version of illustrator cs6 when I try to open up jobs for which I worked on, on my computer, it says now that I have lack of plug-ins, PDF? and don't let me open anything? Please can help you, I am half way thorugh a project and need to work on the program now... thank you for your help...

  Restart your computer.

  If this does not resolve the problem, reinstall illustrator on your current installation.

• Help! WRT54G2, RELEASE/RENEW DHCP DOES NOT WORK!

  Hi, I need help with my router WRT54G2, its been 2 days now that I can't connect to the internet. When I checked my ISP, internet was ok, when I checked my router, release then renew DHCP, nothing on my survivor, I can't get a new DHCP configuration. All I got is '0 '.

  Help, please! Thank you!

  Thank you guys for help. He is now back to normal, the problem was with our ISP, I published the old IP, but on their end, he pondered again the old IP that I published already. And they have set. Thanks for the help.

• The help procedure to remove a bookmark does not work.

  I follow the procedure, click on the bookmark you want to delete. Click on bookmarks and it's still there.

  grayghost2,
  Thank you very much, who fixed it!
  Best regards, DKPL

• Help... My Flash does not work!

  Test Page here
  
  Weird, it worked a week ago?
  
  The flash is very good:
  Test Page here
  
  I hope I am doing something stupid, that we can all have a good laugh!
  
  Thank you
  Richard

  You have the problem of "standard". Open the page in the browser and notice that
  you immediately see a javascript error.

  AC_FL_RunContent is undefined
  [Break on this error] AC_FL_RunContent)
  'codebase',' http://download.macromedia.com/pub/shockwave/cabs/...

  This means that your Scripts folder is not where the code says it is. You
  It's here-

  but it's not - it's here.

  http://www.adelantedesign.co.UK/scripts/ac_runactivecontent.js

  (outside the "root" of the current page)

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "RICH POW" wrote in message
  News:g9jiei$BH6$1@forums. Macromedia.com...
  > No, not a model.
  > This is a single page. Big big background image and a .swf file.
  >
  > Just for the discussion with the customer at the moment.
  >
  > Rich

• In google maps, after seeing satellite or view, links on the map does not work, I have to charge google maps and start all over again

  When I open google maps, the links displayed on the maps can be used. However, if I change to a view street or satellite view and then return to the display of the base map, links displayed on the map is no longer working. I have to leave google maps and reload to get the links to work again.

  Hello peterronald, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Trying to download my pictures from an iPhone 3G, the link to user advanced in XP Windows Wizard scanner and camera does not work. Is there a solution?

  There are about 1500 photos in the film and about 1000 other photos.  It worked when the film was smaller.

  I'm not sure if you are saying that the wizard will not start
  or the wizard launches, but will not download pictures.

  Might be worth trying to manually launch the Scanner and
  Camera Assistant:

  The executable for the scanner and Camera Wizard is:
  wiaacmgr.exe

  If you connect your camera via USB, turn it on and and
  Reach... Start / run... type the following and press on... Come in...
  To start the wizard:

  C:\Windows\System32\wiaacmgr.exe

  Also... with the camera connected and turned on... If you
  Reach... Start / my computer... is the recognized camera
  with the letter t? If_Yes_you can copy and paste photos
  from there to a folder on your hard drive.

• Windows View customer-non-interactive flag does not work

  I use the windows 32 bit Horizon View Client (latest version) in a program to automatically connect to a virtual machine.  The '-not interactive "flag is supposed to remove the error messages, but not the session time-out error is deleted even when this flag is set.  The syntax I use is "wswc.exe - non-interactive - unattended - serverURLxxx.xxx.xxx username - password desktopName xxxxx-xxxxx - xxxxx".  Am I missing something?

  The official word from VMWare: "The - non-interactive option suppresses the error message boxes when starting the Client view and would not remove a mistake during a view as a session time-out error."

• DVD player does not work error code 36 please help

  I have a computer toshiba laptop satellite my dvd rom is not working, it does not give me the error code 36

  Hello

  In addition to the BIOS settings the player himself could have problems.

  -------------

  This instrument requires a PCI interrupt but is configured for an ISA interrupt (or vice versa).
  Please use the computer's system setup program to reconfigure the interrupt for this device.
  (Code 36)

  Interrupt request (IRQ) translation failed.

  Try to use the BIOS Setup tool to change the settings for IRQ reservations (if such options exist). The BIOS can have options to reserve certain IRQS for interconnection of peripheral components (PCI) or ISA devices. For more information about changing the BIOS settings, see the documentation for the hardware.

  On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard.

  --------------------------------

  Check with Toshiba support

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  ===========

  If you have problems after checking the BIOS settings:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My internal Webcam does not work (Windows 8 / PB Easynote) * help *.

  I have a TE Packard Bell's Easynote running on Windows 8. It has built in webcam (a generic unit named WeCam HD). But right out of the box, whenever I run an application that needs to use the webcam, it says "no device detected Webcam. If you are using a built-in camera please turn on"or other similar term. There is absolutely nothing in the user guide/documentation to explain how to do this.

  I went a little further and checked the Device Manager and there are the most recent drivers for this device all present and correct. And in some ways to make worse it, most of the time it doesn't work and it just worked last week. My son took a load of pictures of himself using the webcam internal to give me a new nice screen saver (red led light has been released top the camera was on and work) so I know that he has the opportunity to work. It's not fair. We tried to retrace his steps I guess all that I need is a key command to move the camera power switch (there is no way to access the device that I can find in windows 8). I tried fn & the keys function, Alt or Alt GR and the function keys, the windows key and all the keyboard shortcuts I know, but nothing seems to work. Please is - can someone help or give advice. It drives me crazy

  I think that I finally discovered it. Well, it seems to be correct.

  When you launch the video camera app or app camera for the first time as long as the laptop screen is far enough back the laptop recognizes the webcam and it turns on automatically,

  If you run the application with the screen in an 'L' (side view), then it does not work, it does not recognize the webcam. But if tilt you the screen a bit more far back it seems to work.

  Crazy. But maybe theres an internal sensor or something. Well now worked two times...

  unless it's just a loss connection internal as Douglas says. I'll just keep my fingers crossed that this new crazy method continues to work. If that's all, that's when I'll eat my hat. I've seriously been pulling my hair out over this. Looking at / installation of hardware drivers. Research and try millions of combinations of different keys. Trawling through information about Windows 8 & webcams. And it turns out that, if all goes well, it's just something simple like this...

  But thanks for your colleagues at the time. Appreciated.

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• I have two versions of the same book on my iphone and ipad.  I want the same book, so I can study on each device.  I tried to remove the books and start again.  It does not work.  Help.

  I have two versions of the same book on my iphone and ipad, which are not synchronized with the other.  I want the same book on each device, so I can study on one or the other.  I tried to remove the books on my phone, ipad & itunes and start again.  It does not work.  Help.

  Hello david.hogan87,

  Thanks for posting about what is happening. If I understand you correctly, you have a book you want on your iPhone and iPad, but neither is synchronizing correctly to have both.

  Have you checked every device to confirm that the same identifier Apple is signed all three?

  iPhone and iPad: head to settings > iTunes and App Store

  iTunes: on a Mac, it's under account or installed depending on the version of iTunes store.  On a PC, it is also under account, and if you don't see the menu bar, click on the triangle in the upper left corner to view the Bar Menu or CTRL + B on the keyboard.

  If all 3 have the same signed Apple ID, post the version of iOS and iTunes for all three devices here, please.

  Best regards.