Symantec framework does not

Similar Questions

• Managed Beta 2 - projects of the Entity Framework does not

  Tried to do the simplest EF test I think:
  
  1 deleted all the stuff of Oracle on my system, getting rid of the development tools and others. Reinstalled the client stock 11.2.3.0 (without tools). Installed the new managed Beta 2 in a new House, with development tools.
  2. create a new project 4 .net (c# console application).
  3. create a new Oracle connection, using the managed provider. Travelled around the work a little, and tables.
  4 create a new FE model, load the tables of the database. This also works.
  
  Where it does not, it's when I try to run and do a query, I get this:
  
  ArgumentException: The specified store provider is not found in the configuration, or is not valid.
  Inner ArgumentException: "could not find him required .net Framework Data Provider." It cannot be installed. »
  
  Explicitly adding a reference to Oracle.ManagedDataAccess and Copy Local = True parameter has not changed anything. I don't know at this point what he seeks, but is not finding it.
  
  Also tried adding a configuration section and set TNS_ADMIN, just in case it was. Who has not to solve it. In fact I had to add this to the top of the config file to make it run even after you have configured the config:
  "< name =" article oracle.manageddataaccess.client"type =" OracleInternal.Common.ODPMSectionHandler, Oracle.ManagedDataAccess, Version = 4.112.3.60, Culture = neutral, PublicKeyToken = 89b483f429c47342 "/ >
  
  I will update the post if I tell me what goes wrong here, but it seems like it should work.

  I assume that you run the configure.bat Installer script included with the installation of Xcopy. In the future, you can run just this part of the script that configures the client factory section. The installation script is commented so that you can easily discern where it is.

  In this way, you don't need to create the unique entry from factory to customer for .NET applications on your machine.

• 7.2 framework does not install under Windows 7 Ultimate

  HELP: FrameMake2 7.2 does not install under Windows 7. Near the end of the installation, it hangs with a blank dialog box and a warning. Nothing else.

  All view

  Keep smiling

  Thomas

  Hi Thomas,

  Long time no see...

  If FM7.2 is not officially supported, I think you must be in compatibility mode so that it can behave properly with Windows 7.

• 4.5 Microsoft Framework does not work properly

  First see the error when you try to run a lot of basic programs such as assistance to decision-making in charge of hp. The exact error is "c:\windows\microsoft.net\frameworkx64\v2.0.50727\mscorwks.dll is not designed to run on windows or it contains an error. I am running windows 8, and to download the 4.5 but the installer refuses to proceed because there is already an equivalent version installed. I also tried to use a tool to remove the current version of the framework and re install it but no luck yet once because the framework is always magically. I appreciate any help I can get. I could not find similar questions so I created a new, but I apologize if there is already a fix.

  How does this relate to the features of Windows Update?

  Note: Win8 is supplied with .NET Framework 4.5 already installed by default. See http://msdn.microsoft.com/en-us/library/5a4x27ek.aspx

  Is...

  • Panel | Programs and features. Turn Windows features on and off: .NET framework 4.5 Advanced Services <= this="">  

  .. checked (activated; turned on)?

• Age Of Empires Online is angry a lot and NET. Framework does not

  I'm having a problem with Age Of Empires.  He continues to display a black box around the objects of many.  As the card, the cat, units etc...

  

  Is it to do with the NET. Framework.  If so I can't download it because it repeat it cannot install net framework 1, 2 and 3. I am able to install Net Framework 1 from the website itself.  If I download Windows Movie Maker, it says that it requires net framework 1, 2 and 3.  But it is impossible to install it. Anyway this happens to me on my computer and on my pro surface.  They have all two 8 Pro 64 - Bit Windows on them.

  The default value that .net included in windows 8 is 4.5. The old version of .net is not required.

  There might be some app run at startup which is your CPU of doping use.

  Launch the game mode of boot is a way to discover the faulty app to run at startup.

  http://support.Microsoft.com/kb/929135/en-us

  Link to movie maker

  http://Windows.Microsoft.com/en-in/Windows/get-Movie-Maker-download

  Ded9

• TPT entity framework does not--&gt; showstopper

  Greetings,
  
  I am facing a similar problem that is described here:
  
  [EF and legacy - EF Possible bug?: http://stackoverflow.com/questions/11506683/entity-framework-and-inheritance-possible-bug-in-ef.]
  
  I use:
  
  Windows 7 64 bit
  ODAC 11.2 Release 5 32 bit
  Oracle 11.2 Express on localhost
  Visual Studio 2012
  Framework of the entity 5.0
  .NET 4.5
  
  Create a simple database with TPT inheritance:
  
  
  CREATE TABLE person)
  ID NOT NULL, NUMBER (38, 0)
  Name VARCHAR2 (50).
  PK100 CONSTRAINT PRIMARY KEY (Id)
  )
  ;
  CREATE TABLE Employee)
  ID NOT NULL, NUMBER (38, 0)
  JobTitle VARCHAR2 (50).
  PK101 CONSTRAINT PRIMARY KEY (Id)
  )
  ;
  ALTER TABLE Employees ADD CONSTRAINT ref_Employee_person
  FOREIGN KEY (Id)
  REFERENCE Person (Id)
  ;
  CREATE TABLE Superhero)
  ID NOT NULL, NUMBER (38, 0)
  Superpower VARCHAR2 (50).
  PK102 CONSTRAINT PRIMARY KEY (Id)
  )
  ;
  ALTER TABLE ADD CONSTRAINT of superhero ref_Superhero_person
  FOREIGN KEY (Id)
  REFERENCE Person (Id)
  ;
  -Sequence
  CREATE SEQUENCE seq_id
  INCREMENT BY 1
  START BY 55
  MINVALUE 1
  MAXVALUE 9999999999999999999999999999
  NOCYCLE
  ALL
  CACHE 20
  /
  CREATE OR REPLACE TRIGGER PERSON_BI BEFORE INSERT ONE PERSON FOR EACH LINE
  BEGIN IF: NEW.ID IS NULL, THEN SELECT SEQ_ID. NEXTVAL INTO: DOUBLE NEW.ID; END IF; END;
  /
  
  Create a console application, add an edmx file, set up heritage as follows:
  
  Diagram
  
  And I put the Id property of the Person as StoreGeneratedPattern entity identity
  
  Next, I created the following program:
  
  
  public static void Main (string [] args)
  {
  Employee
  var db = new Entities();
  EMPLOYEE e = new EMPLOYEE() {ID = 0, JOBTITLE = 'Programmer'};
  e.NAME = 'John Doe regular';
  DB. People.Add (e);
  Superhero
  Superhero s = new SUPERHERO();
  s.NAME = "Superman";
  s.SUPERPOWER = "flight."
  DB. People.Add (s);
  DB. SaveChanges();
  
  Search all people and look at the guy
  This is where I get an error:
  var allPeople DB. People.ToList ();
  
  allPeople.ForEach (x = > Console.WriteLine ("type:" + x.GetType ()));
  
  }
  
  This will raise the following error when I extract in allPeople:
  
  
  All objects of the 'Entities.People' EntitySet must have unique primary keys. However, an instance of the type "TestingTPTInheritance.EMPLOYEE" and an instance of type 'TestingTPTInheritance.SUPERHERO', both have the same primary key value, ' EntitySet = people. ID = 38'.
  
  
  Looking at the database, everything seems fine
  
  -Table of the person-
  ID NAME
  39 regular John Doe
  40 superman
  
  -Employee table-
  ID JOBTITLE
  Programmer 39
  
  -Table of superheroes-
  SUPERPOWER ID
  Flight 40
  
  If I select it that EF generates in "db. People.ToList (); "and run I get the following result:
  
  C1 C2 C3 C4 NAME
  0X0X 40 Superman
  0X0X 39 John Doe regular programmer
  
  Is this a bug in ODAC. If even there is a work around or will there be a fix soon?
  
  Published by: Amplus on 7.11.2012 07:59

  Given our generated queries are slightly different (for example CASTs on the ID column and the order of the columns in the SELECT list).
  the result of the query should be logically even.
  I ran the query generated from you on my 11.1 database, and the result is below.

  C1 C2 C3 C4 NAME
  0X1X Superman flight 66
  0X0X 65 John Doe regular programmer

  You see the 'theft' is not absent from the line of "Superman."

  If you run the generated query me on your database Oracle Express 11.2 and 'Theft' is still missing, then we
  don't know there is difference between the two databases that we use.
  The error that you got may be linked to this difference. You can confirm by trying with other Oracle database
  other than an Express database.
  Be sure to replace "SCOTT" with "TRP" in the generated query me.

• Entity Framework does not load the DB Oracle Types columns

  Hello world
  
  It is my first foray in EF and EF on Oracle, so go easy on me please!
  
  I use the ODAC beta 2 with VWD2010 and declaring my class of entity with the types of Oracle, for example. OracleString, etc. OracleDate.
  Everything seems ok, but when I insert my entity from the database, only DB columns reported in my class of entity types with .net (not the Oracle ones) are loaded.
  

  public class Customer {
  
  [Required]public string ACCOUNT {get; set;}
  
  [Required] public OracleString NAME{get; set;}
  
  }

  OracleDB _db = new OracleDB();
  
  string Account  = "TESTCLIENT";
  
  var customer = (from c in _db.Customer where c.ACCOUNT == Account select c);  

  If in the case above, the entity has only the value of ACCOUNT set. The NAME value is set to null.
  If I change the channel NAME declaration, then it loads ok.
  
  Am I missing something? Or can we not use these types in EF?
  
  Thank you
  Nick

  You are not supposed to use the types of Oracle in the FE model. You use .net types and EF manages the conversion to types as necessary to interact with the Oracle database.

• Windows 7 update does not

  My entire hard drive crashed, lost everything.  The recovery process has not worked.  I replaced it with a new (1 to).  I have a HP Pavilion Elite HPE 410t with 8 GB or ram.  I have Windows 7 discs.

  I installed Windows again, but I meet all kinds of questions.

  (1) Windows update does not work - guard telling me the service is not running.  Checked, and this is according to the system.

  (2) .net framework does not install

  (3) another strange thing is that some web pages KB MS are not allowed by EI.  Very strange.

  I'm about to order the recovery media to my system via the website of HP, but I would like to hear if there are suggestions from the community.

  Thanks in advance.

  Hello

  Of your HP PC support site shows that you have an Intel Chipset. If you need to download and install this driver.

  Here is the driver download site for your PC with all the available drivers and software.

  Here are instructions on running the diagnostics of startup time.

  Let me know how it goes.

  Jaco

• The battery icon says connected does not support

  When I clicked on the battery icon that he read plugged not supported. I turned off the computer & pulled the battery, then I held the Start button for 10 seconds, put battery back in & read it plugged in charge.  The next day, it was the same probleThe computer is the Pavilion 10. Looks like a domestic framework does not work. Any suggestions would be helpful.

  Original title: battery icon says not connected charginr

  Hi nancypalmiter,

  1 - is your laptop battery charge when turned off?

  2 did you do changes on the computer before the show?

  Sometimes, the problem may be with the laptop. The battery isn't bad, but it could be a loose connection or hardware problem with laptop. It will be the right idea to get the material under test if the battery of the laptop is not getting loaded even if the laptop is turned off.

  You can also try the BIOS update and check if it helps. You can get in touch with the system manufacturer for assistance for the update of the BIOS.

  Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Reference link:

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Additional information:

  Battery not power Notebook or hold a Charge

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00259897

  Hope this helps and keep us informed if you need help.

• PS possible bug on Wondows? Value of the radius of the value 0.1 for filter | Sharpen | Smart Sharpen does not at all.

  Hello

  I'm running the PS latest version 2015.1.2 (subscription) - 20160113.r.355 x 64
  I installed it on a Windows 10 computer and on a MAC El Capitan (OS X 10.11).
  

  But there is a difference in what a certain sharpening setting does not work on the Win10 PC.
  

  I chose:
  Filter | Sharpen | Sharpness...
  

  From there everything works OK on the Mac.
  But on the PC, a framework does not at all and it is if I set the RADIUS to 0.1.
  All other values respond normally, while the 0.1 parameter is simply dead (respond well on MAC).

  I (re) installed PS in Norwegian and English (International), but the problem is persistent.
  This could be a bug in the version of PS window?

  
  Concerning

  
  Erik Aaseth

  Norway

  Solved!

  When you enable more "accurate" for sharpness (under the gear wheel), the value 0.1 works too!
  But w / just "use Legacy" checked (by default), there is not admissible.

  

• Mozilla, your last update does not include the last cert of intermediaries of extended validation from Verisign, Symantec class 3 EV SSL CA - G2, please fix ASAP

  Your last update of firefox, Mozilla does not include the last cert of intermediaries of extended validation from Verisign, Symantec class 3 EV SSL CA - G2, please fix ASAP

  Firefox never includes the intermediate certificates.
  It is the responsibility of a server to include all the intermediate certificate required to make it possible to build a certificate chain that ends with a trusted root certificate embedded.

  Note that Firefox automatically records the intermediate certificates that servers send in certificates for future use Manager (they appear labelled as 'Software security device' in the References tab).
  If a server does not send a complete certificate chain then you get an untrusted error when Firefox has stored missing intermediate certificates to visit a server in the past that a send it, but you get an untrusted error if this intermediate certificate is not yet registered.

• Flash does not not in the links of the framework

  I use flabell mp3 player on my web page, I have created frameworks for that so this mp3 player comes in frame when I click on the link of the other frame, every thing is normal but the music is not playing, this problem is with mozila only because I tried chrome and IE, it works fine with that , but mozial it does not work.

  This image has a specific CSS code?

  We have seen some reports that adding code transformation or transition to the frame is causing issues.

• Windows XP does not level net framework 3.5 service pack 1 or service pack 2. Error code 80070673. Also, don't look for new updates - error code 80070490.

  My windows xp tried to upgrade with the 3.5 framework - net framework 3.5 SP1 update family (KB951847) x 86 since 07/08/09.  History shows that he has failed every time.  He also tried to install service pack 2 (KB948465) since 07/08/09 and has failed each attempt.  When I try to check new updates, it says "windows has not can find new updates" with an error code 80070490.  When I try to upgrade with the framework 3.5 service pack 1, it says "some updates were not installed" with an error code of 80070673.  History shows that all other updates have been installed successfully.  Please let me know what I need to do to fix this problem.

  Read the article (I posted the URL): http://support.microsoft.com/kb/958044

  You will need to fix the OS before trying to fix the rest of your problems. If the OS is unstable, then nothing else will matter. Make sure you have backups up-to-date of all your personal stuff and know where the product keys etc in case you should reinstall. That your OS is stable/fixed you can follow instructions from PA Bear re updates of the framework.
  
  Windows 2000, Windows XP and Windows Server 2003 to resolve this issue, use the System File Checker to check that the correct versions of the file system are present. To do this, follow these steps:

  1. Click Startand then click run.
  2. Copy and then paste (or type) the following command in the Open box, and then press ENTER:
     cmd
  3. At the command prompt, type sfc/scannow, and then press ENTER.

     Note If you are prompted for your Windows XP CD, insert the CD into the CD drive.

  4. Once completed the System File Checker, try installing updates again.

  For more information about the System File Checker, click on the number below to view the article in the Microsoft Knowledge Base:

  310747 (http://support.microsoft.com/kb/310747/) Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  If the System File Checker does not resolve the problem, you must perform a repair of Windows XP installation.

  For more information about how to perform a repair of Windows XP installation, click the number below to view the article in the Microsoft Knowledge Base:

  315341 (http://support.microsoft.com/kb/315341/) how to perform an upgrade on the spot (reinstallation) of Windows XP

  Once installation is complete repair, try again to install updates.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer. TaurArian [MVP] 2005-2010 - Update Services

• Error installing Microsoft NET Framework 3.5 Service Pack 1 Setup program has detected that this computer does not meet the requirements to install this software

  I need to install Microsoft NET Framework 3.5 Service Pack 1, as it is necessary to perform a Dell diagnostic Test, but I've been advised that: Setup has detected that this computer does not meet the requirements to install this software. Requirement: Windows install 3.1.

  However, when I look at the download page of Windows Installer 3.1 is not actually as for XP with SP3. I tried anyway and: Setup has determined that the version of Service Pack for this system is newer than the update you are applying. There is no need to install this update. Well actually it is there...

  Is there a way to get around this?

  See below articles for solution

  1 system requirements for the .net framework

  http://msdn.Microsoft.com/library/8z6watww.aspx

  2 download links for .net framework

  http://www.Microsoft.com/net/download

  or

  http://msdn.Microsoft.com/en-us/library/5a4x27ek

  3. top 8 resources for .net framework

  http://www.Microsoft.com/net/itprofessionals

  4 dependencies and Versions of .NET framework

  http://msdn.Microsoft.com/library/bb822049.aspx

  5 frequently asked questions
  http://msdn2.Microsoft.com/en-us/netframework/aa497323.aspx

  6. management of versions, compatibility and run side-by-side in the .NET Framework
  http://msdn2.Microsoft.com/en-us/netframework/aa497340.aspx

  Good luck

• Windows Update KB953297 (Net Framework 1.1) does not install

  Hello

  Windows Xp Sp3

  Procedure of common windows update wants to install update KB953297 security

  Updated download and inilialises, but refuses to install.

  What's wrong?

  What is the solution?

  Keith Keith

  Thanks Adamjy12345!  Amazing!  After spending a whole day with MS support yesterday, January 27, 2010 and getting nowhere, I followed your suggestion today and it seems that my troubles with the issue of the kb953297 are more.  I just rebooted and checked, and this time I have not asked me to update .net framework (953297 KB).

  I don't I remember exactly what I've done since the shock of seeing "installed successfully" hit me.  However, for others, I say lets find the netfx files after you run the dotnetfx.exe first the search option of windows classic.  Research others (I am running windows XP PRO) does not work, because I believe that it does not immediately again locate files.  Also, I do not see the file named netfx.msi when I did the search.

  Wait now, new information appears: my memory starts to come back, and I think remember me that * NPD1 * successfully completed the second time I tried without me having to tell her where the * netfx files were; so NDP1.sp1 - KB953297 - X 86 .exe found the files there without my help, even though I've never actually seen the netfx.msi file location!  I hope you have the same chance.  Don't forget to run dotnetfx.exe first, then run the NDP*.exe file at least twice, if it doesn't work the first time.  I know it's illogical, but well, these things are too complicated for me to describe with precision.

  p.s., Adam - I don't know how "mark you' but of course you deserve.
  Update - I've tagged you 6 to 7.  Hope it's what you mean. (Jan 28/10 @ 1115hrs.)
  Greetings to all.