Tecra S1: How to change some keyboard keys?

Similar Questions

• How to change the keyboard on Portege M300-101?

  Hello

  I have a Portege M300-101, and I would like to know if there are instructions online for how to change the keyboard itself. Our unit comes with, I think, a Belgian keyboard installed... and a U.S. keyboard in the box. Are there instructions available for how to move on the keyboards? Also, I guess it's a good idea to switch the keyboard before turning on the laptop for the first time. Do you agree?

  Best,
  Dainis W. Michel

  Hello Danis

  Unfortunately there is no public document on this subject. You can try to do it alone, but please don t forget that on this guarantee valid path will be cancelled. Basically, the replacement of keyboard is not well complicated and technicians may need 15 minutes to do.

  In my opinion, you can take a risk and pay for replacement before losing the valid guarantee. The Portege is very expensive and of damage to property, it is very risky to be unsecured.

  If you still think that you do not write anything again.

• How to change the product key for Office 2007?

  Original title: product key used.

  When I loaded Office 2007 I used a product key with any additional use.  I try to enter a different product key, but impossible to find how to do this.  Can you please direct me to the correct site to do this?  Thank you!

  Hello

  It would be easier to uninstall it and then reinstall it by using the different product key.

  How to change the product key for Office XP, Office 2003 and for Office system 2007" http://support.Microsoft.com/kb/895456 http://www.mydigitallife.info/how-to-reset-or-change-Microsoft-Office-2007-product-license-key-or-volume-license-key-VLK/ See you soon.

• How to change my product key for Windows 7?

  I RECEAVED THE KEY PRODUCT FOR REAL WIDOWS 7 AND INSTRUCTION HOW TO CHANGE MY PRODUCT KEY

  THE INSTRUCTION SAY CLICK START AND SHORT CLICK COMPUTER, CLICK ON THE PROPERTY AND AT THE BOTTOM OF THE DIALOG BOX CLICK ON CHANGE PRODUCT KEY

  BUT WHEN I'M THERE IN THE BOTTM OF THE BOX SAY SET IT AND NOTHING TO CHANGE THE PRODUCT KEY

  PLEASE IF SOMEONE CAN HELP ME

  THAK YOU

  You have right click on computer and then select Properties.

  Please see: how your product key updated in Windows 7

  Carey Frisch

• I tried to update the drivers that I used my motherboard Asus drive and some how it changes some firmware on the operating system

  OK, my problem is that I don't have a PC before generation. It is a custom build. A week ago while I was trying to update the drivers, I used my motherboard Asus drive and some how it changes some firmware on the operating system. now that is fixed. and now, just yesterday I downloaded the Windows Essentrils to win mail. This morning I woke up and started my PC and I get a red screen saying that some unauthorized to the firmware change has been done to solve this problem, I think I have to erase my hard drive and re to stall my win 7. and how do I do with the disc because it is a refurbished lic. Windows Essentials

  Yes

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• Tecra A11 PTSEOU: Some keyboard keys not working not

  Hello

  In my Toshiba Tecra A11 PTSEOU - 08904L model, some of the keys on keyboard did not, initially, key 6 did not work. But now about 12 keys did not work.

  When I press one of these keys, I hear a single beep and nothing happens.
  Even I can't see the bios menu when you start the computer as "press f2 for boot menu".

  Is there something to do with the bios for this problem?
  I tried updating the bios, but the installation failed saying incompatible bios. Help, please

  Thank you
  Thawfeek.

  > Is there something to do with the bios for this problem?
  BIOS? Why ORGANIC?
  I assume that the problem of its equipment and you will have to replace the internal keyboard.

  Just to confirm the problem with keyboard: you can connect external USB keyboard.
  In case the external keyboard would work correctly, the problem is related to the internal keyboard.

• Tecra S3: How to emulate the keyboard Fn key

  Hello!

  I use a USB external keyboard connected to the Port Replicator port on my S3.
  Is there a way to emulate the Fn key on the external keyboard?
  I would like to have access to the NF - F [1-7] functions, for example turning on bluetooth, suspending the laptop...

  Any help is appreciated!

  Thank you and best regards,
  Fabrizio

  Hi Fabrizio

  I think that it of possible to emulate the FN key on the external keyboard.
  Toshiba HWSetup must be installed on your laptop and this tool supports several options and settings.

  Simply select the tab called keyboard and set the option
  External keyboard key FN.

  good luck and greetings :)

• How to change the keyboard on Tecra S

  Hello

  I need a little help to replace my broken keyboard.
  I have not found any procedure here or in the user guide.

  Who is screwed, I have to remove to change the keyboard?

  Thanks for your help

  Yves

  Myself and others here are not clairvoyant so maybe you could post your model of laptop. ;)

• Tecra A10 - how to change the RAM?

  Hello

  I was wondering I just bought a new Toshiba Tecra A10, I just wondered how the change of the RAM, it comes with 1 GB of Ram I want upgraded to 2 GB or 4 GB.

  The RAM slots are located at the rear of the Machine or below the keyboard?

  Any help will be appreciated.

  Thank you.

  Hello

  Memory module compartment is placed at the bottom of the unit.
  You can remove the screw clean the lid in plastic and then you will be able to remove this cover and access locations of memory.

  AFAIK, you can upgrade the memory for max 8GB (2 x 4 GB), but it's not necessary you can upgrade to 4 GB RAM and it is more than enough

  Welcome them

• Tecra A9 - how to change the DVD?

  Can someone help with instructions how to change DVD for Tecra A9 model PTS52A please. Thank you

  Hi t.,

  As far as I know the laptop is fixed with a screw on the lower side that you can remove. But I think we should remove the keyboard as well to remove what the CD/DVD drive. So if you are not familiar with the disassembly of the laptop, you will have to help a technician for laptop.

  Otherwise, you can search with Google to find Web sites, they show how to disassemble the laptop. ;)

• How to change the product key from a pre-installed windows 8 single language x 64

  "My PC manufacturer has made a change of material on my laptop and now it is not activated' this product key is already used on another PC (error Code: 0xC004C008). They gave me a new product key and I tried it. My laptop accepts the key product, but after some time, he is back with the old key and is not activated. Is it possible to change my product key? Thank you.

  Press the Windows key + X

  Click prompt (admin)

  At the command prompt, type the following commands:

  slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)

  xxxx-xxxx-xxxx-xxxx - represents your product key

  Press enter on your keyboard

  Leave the command prompt

  Restart your computer

  Try again activate by phone:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  
  

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Tecra S2: How to change the card Nvidia Geforce Go 6600 64 MB to 128 MB

  Can anyone here help me how to change toshiba tecra S2 vga nvidia geforce go 6600 64 MB to 128 MB?

  Please help me, it's important to me.

  Best regards

  Thank you... for everyone

  Well, what to say.
  A GPU upgrade is usually undesirable because no one can tell if the laptop would be stable after this replacement. So generally I would not recommend doing these upgrades.

• Tecra A11 - how to change the sensitivity of the touchpad?

  Our company has recently bought some Tecra A-11 to replace some of the old Pros of Satellite. We have noticed that there is a tendency for the mouse cursor jump from one place to another on the screen while typing causing major issues when coding and writing emails. Sometimes you just type in a place and not notice while other times it will select and remove chunks of text without noticing your.

  We can lower the sensitivity or what options do we eliminate this problem.

  Hi CGAdjensen,

  Yes, you can change the sensitivity of the touchpad, that s no problem. Also, I did this because the default is too sensitive for me.

  So go to control panel > hardware & sound > mouse > advanced > advanced feature

  Check this box!

• How to change the product key Vista Ultimate to a real?

  I want to remove questionable files and activate vista Ultimate edition with my correct key, anyone know how to do this? Thank you

  * original title - I downloaded a full activated Vista Edition, version now, I bought a key and want to make it genuine *.

  Hello

  read this

  http://pcsupport.about.com/od/productkeysactivation/HT/changevistakey.htm

  http://www.lancelhoff.com/how-to-change-Windows-Vista-product-key/

• How to change the product key because it uses the product key previous I have used before

  Original title: Windows Anytime Upgrade

  I used an upgrade product key to Windows 7 Ultimate edition. However I had problems with it so I want to use another, but whenever I click on it, he's trying to update with the previous key. Is it possible to "get rid of" the existing key out there so I'm able to use my new?

  Hello eemiaturner,

  I usually don't link to the non-microsoft pages, but I couldn't find a 'How To' with screenshots.  The following URL shows how get you to the section change the product within Windows 7 key.

  http://www.sizzledcore.com/2009/10/26/how-to-change-Windows-7-product-key/

  You can also try the command line to change the product key:

  1. Click the Start button, and then type: CMD (in the field "search programs and files" in the Start Menu)
  2. The Start Menu displays "CMD.exe."
  3. Right click on the file CMD.exe and select run as administrator.
  4. In the CMD window, type: slmgr.vbs - ipk
  5. To activate windows after changing the key, type: slmgr.vbs - ato

  I hope this helps.

  Marilyn