Command-line curl...

Similar Questions

• Creation of OAM authentication Plugins, plans and policy responses by command line

  Hi all

  I was plenty around, search the internet and MOS but did not find anything so far.

  In OAM (11.1.2.2.4) I am trying to create a PlugIn for authentication, specify the step, the config params, orchestration, and so on. It works pretty well through the GUI. However, as I have a lot of different situations to deal with, I would like to automate this, using a command line tool (wlst.sh I think).

  Does anyone know how I could do?

  Side, I would also seek the same for patterns of authentication and responses, but I hope that as soon as I know how to do it on the plugin from I can derive from those others here.

  It is doable but completely undocumented. What you need to do is wlst write scripts that access the mbean OAM, who is responsible for the update of oam - config.xml to add the required parameters.

  What I do is to capture the current settings (IE make a backup of oam-config. (XML), and then perform the configuration via oamconsole. Then, compare the oam - current config.xml with the backup and note the differences. Using wlst and OAM mbean to add these entries. This wil you require to understand how to upgrade the config.XML of oam - via the mbean and involves a bit of understanding of jython to do the job.

  For policy responses and enforcement strategies, you can use the OAM REST interface which you can drive from curl or anything that can handle http requests. It is much easier to use than rreg.

• How can I use the clang of command-line compiler?

  It is said in the new update clang is a command line tool.

  Do you have, or wish to develop, C, C++, Objective-C or Objective-C++ code you want to compile it on the command line with the clang compiler? It is a facility that is optional and not included with OS X.

• command line "install MAC OS x 10.9 Mavericks' has been accepted what then?"

  Hello again

  Always in the hope of getting help, none so far. BUT I've made some progress. Using CMD + S I'm entered in 'install MAC OS x 10.9 Mavericks' this command was excluded. Now a list of choice as follows:

  Install (-bCcpSsV) (-suffix B) (-f flags) (-Group g) (-m mode)

  (- owner o) file1 file2

  Install (-bCcpSsv) and again the f g m b

  (- owner o) file1... fileN directory

  Install d (-v) (-Group g) (-m mode) (-owner o) directory

  I'm trying to install OSX with USB - HDD

  "owner) it's me. Please how can I proceed!

  Those who are not choices. Here's the proper use of the command line, thinks you meant. But the command you entered is not valid. Simplify your life. Start the computer normally. In the eyes of Applications folder for the installation of Mavericks application. Double-click the icon.

  Note that if you have a PowerBook under Leopard, so you cannot override. If you have a real MacBook or MacBook Pro, then you have other options. But you have not provided sufficient or correct information to help you.

• Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  I mean ' diskutil cs * " and so on..."

  Yes, you must use the resizeStack command. Please see Re: how to repair fsck "your drive could not be partitioned..." Bootcamp does not as an example.

• Firefox command line option 'no-remote' launches a redirection of spam

  I set up multiple profiles in Firefox. I want to be able to run multiple profiles at the same time, so I created the shell script to start each profile; example:

  nohup /Applications/Firefox.app/Contents/MacOS/firefox Pei User01 no remote > / dev/null 2 > & 1 &

  When I do that, I get the following pop - up. The endpoint may change, but the section of domain.domainggateway.com that seems to start forwarding appears every time.

  http://11165504-364378.domain.domaingateway.com/redirect?o=0 & y = 0 & x = 0 & r=http%3A%2F%2Fpdamv.bidsystem.com%2Fppc%2Fclick.aspx < deleted long chain - c >

  I have narrowed down in determining that this will happen only when I use the option 'no-remote '.

  I suspected that I had malicious programs from a Plugin. So I carefully and completely uninstalled Firefox, twice. Yet both times I kept getting this pop-up when you start by the above command. I have not found a solution.

  I now suspect some lance this code lies in the official download of Firefox, but I don't know how to dig into that one more away. Ideas on how to figure out where it comes from and how to fix?

  Mac OS - X 10.10.5
  Firefox 4.0.0.3

  Thank you

  'Re missing you the main hyphen before '- no - remote', if Firefox thinks you want to open the remote Web site no.

  • https://developer.Mozilla.org/Command_Line_Options
  • nohup /Applications/Firefox.app/Contents/MacOS/firefox-aucun-distance Pei "User01" > / dev/null 2 > & 1 &

  You can add - no.-distance to the command line to open another instance of Firefox with its own profile and run multiple instances of Firefox at the same time.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • https://developer.Mozilla.org/Mozilla/Multiple_Firefox_Profiles

  Note that you can not open external links in a Firefox instance started with the - non-interrupteur remote, usually it is recommended to launch default profile without the - No.-remote switch unless you are never to open external links (by clicking on a link in an email) in Firefox.

• What is the parameter to specify on the command line for thunderbird automatically send email.

  I do apply to using macros Calc and precise automatically send emails, I know it's possible, to inform the parameters through a command line, but Thunderbird does not send automatically receives them, only the parameters, fill in the fields, but the send command are required manually.

  Thunderbird does not authorize this transmission stripped.

• Update to the ARD El Capitan command line

  I use the ARD to manage a growing number of Mac on a single network.  I'm up to 40 now and I'm looking to upgrade the existing installation of Yosemite to El Capitan.  I googled high and low and can't seem to find an answer - the question is-

  With the help of the ARD-tools (installation and unix command line, etc.) is there an effective or recommended to upgrade all 40 machines without having to touch each?

  ARD is really updated the operating system as possibly other related - including applications Apple components. There is a major difference between the upgrade and update and if you tried to use ARD to the upgrade you would effectively disable the client ARD, stopping the upgrade.

  There are a number of ways to all of your mac estate 'upgrade' without needing to touch each one, and most will involve having a NetInstall/NetBoot server on your network. TheNetBoot Service comes with the.app that buy you from the App Store. All methods will be asked to download the installer from El Capitan first. It's to you how you want to go about this, but using the network, but also the OS X Server to deploy the upgrade, as well as the wealth of other services and tools available once you move to the server can be a little too far - no insult intended - for all of your skills? If this is the case for you then maybe simply by downloading the installer once, the cloning of an external hard drive (or a number of external hard drives) and to upgrade as it would be best for your situation?

  Apple gives the the terminal commands for the creation of a bootable El Capitan installer in this article:

  Create an installer for OS X - Apple support bootable

  Tony

• Command line to install a safety device

  Is there one was to install security via command line?
  Example: ActivClient (acpkcs211.dll) in order to allow the CAC/PKI authentication.

  Normally scrolls the Options - tab - certificates - safety in the graphical interface of advanced devices.

  Thanks for your support!

  You will need to do this, use the specific NSS utilities.

  • https://developer.Mozilla.org/NSS/tools
  • https://developer.Mozilla.org/NSS/tools/NSS_Tools_modutil
  • https://developer.Mozilla.org/NSS/tools/NSS_Tools_certutil

• Command line for multiple accounts

  Hello

  When I started using thunderbird, thunderbird load time was quick.
  Currently, I have 12 e-mail accounts and now when I run thunderbird it takes almost a minute before thunderbird is fully charged.

  My question:

  Is it possible to create separate 12 "'profiles', each profile represent an email account.
  Then, start thunderbird command-line and the desired email account.
  Example: thunderbird.exe /profile_1

  Profile_1 contains an e-mail account.

  This way I always start with an email account (an Inbox) and thunderbird starts up normally.

  Thanks and regards,

  Ron

  "C:\Program Files\Mozilla Thunderbird\thunderbird.exe"-e:\my_profile profile will launch Thunderbird with the profile stored at e:\my_profile

• A black bar with command line down load automatically - how to remove

  Some time ago I noticed that a black bar began to appear at the bottom of the firefox window. There > > brand on the left, a suite command line to report without delay, which allows me to write, and an icon key and 'x' on the right. When I hover the mouse over the key, he says "switch developer tools" (or something similar in the sense - I translate from Polish). I spent the better part of an hour to seek solutions on the web, but I'm at my wit's end now - I don't know yet what we call this bar! Whatever it is, I would be eternally grateful for any advice on how to remove this terrible thing my browser (the more permanent solution, the better it is). Thanks in advance

  Try to go into Tools> >Web Developer> > now uncheck all options

  More:

  • Create a screenshot of the problem

• Windows of different sizes from command line

  Hello

  I'm running Firefox and - width - height of command line options. The problem I have is that these settings are ignored if a Firefox window is already open. In this case, all of the following windows are open with the size of the first (original) window. It does not matter what I type for width and height. These parameters are used only for the first window, when Firefox is actually started.

  I've mitigated it wrong before with javascript used in web pages to resize the window to the document load event. Now I have to upgrade to the latest version and resizeTo does not work on windows that are not open via window.open.

  What are the options I have to open multiple windows of Firefox with different sizes? They all use the same profile.

  We use a very specific environment, closed and controlled with a web server and not internet access. There was no need for update of Firefox 4. Now, we want to upgrade, but this change in functionality prevents us from the upgrade. Because the computers of our customers are on CentOS 5, we would be upgrading to Firefox 17 which is part of the standard CentOS 5 distribution.

  I wrote a bash script that made a list of the windows, firefox lance made a list once again. It then searches the differences in the lists of before and after opening firefox. In the end, the script uses wmctrl to change the size of the window which were found also recently opened. There is a small chance that some other window might appear while the opening of firefox and it will be be reduced too. However, in our case, this probability is very low and it is not worth.

  Here is the script which takes 3 parameters: width, height, URL.

  #!/bin/bash
  
  diff(){
    awk 'BEGIN{RS=ORS=" "}
         {NR==FNR?a[$0]++:a[$0]--}
         END{for(k in a)if(a[k])print k}' <(echo -n "${!1}") <(echo -n "${!2}")
  }
  
  window_count=$(wmctrl -l | wc -l)
  
  windows=()
  
  wmctrl -l > output
  
  exec 0<output 
  
  while read id type machine name
  
  do
  
    windows=("${windows[@]}" "$id")
  
  done
  
  # width and height in this call are ignored if some other firefox window is already open
  
  /usr/bin/firefox -P profile -width $1 -height $2 -new-window $3 &
  
  new_window_count=$window_count
  
  while [ "$window_count" -eq "$new_window_count" ]
  
  do
  
    #echo waiting...
  
    sleep 1
  
    new_window_count=$(wmctrl -l | wc -l)
  
  done
  
  new_windows=()
  
  wmctrl -l > output
  
  exec 0<output "$id")="" "${differences[@]}"="" $i="" -e="" -i="" -r="" 0,-1,-1,$1,$2="" <="" differences="($(diff" do="" done="" for="" i="" id="" in="" machine="" name="" new_windows="("${new_windows[@]}"" new_windows[@]))="" pre="" read="" type="" while="" windows[@]="" wmctrl="">
  
  done
  
  I had to do some tweaking in the script to fool the HTML editor. Some formatting of text is performed, that is not source friendly. That is why the script might look formatted strangely.
  
  </output>

• How to reset Firefox from the command line (without a mouse) on Linux?

  I use Firefox for automated desktop screenshots xvfb virtual. There is no mouse. So I need to reset Firefox from the command line. Uninstall a re - install led again to the window "reset".
  I use Ubuntu Server Edition 13.04.

  Otherwise, without a keyboard and a mouse, you can just reinstall and delete. / mozilla folder.

• Command line

  Using Firefox, Aurora and all night on the same machine:

  Path for Firefox is: "C:\Program Files\Mozilla Firefox\firefox.exe" p - Ian
  Path for Aurora is: "C:\Program Files\Aurora\firefox.exe" PEI Camelot
  Path for every night is: "C:\Program Files\Nightly\firefox.exe" PEI conducting

  It is, if Firefox is running and as I click on the icon of the Aurora, another Firefox window opens and not Aurora; for even if I click on the icon for every night, another Firefox window opens and not every night. The paths are clearly separated. The Profile Manager has the correct user name.

  How can I set the three concurrent sessions to be opened on a single machine with their username each? Am I missing something?

  You use the -no-remote command line option to open a second instance of Firefox using another profile and the target application. For example, if "C:\Program Files\Mozilla Firefox\firefox.exe" p - Ian is open, use this command line to start your profile conducting:

  "C:\Program Files\Nightly\firefox.exe" -p BetaTest -no-remote
  

  For more information, see http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• How can I enter in the start page of the command line "firefox.exe"?

  I want to write a script to use firefox to download information about a series of addresses on a street. For example: 101 State St, 102, 103 State St State St,... etc. The script will travel addresses and streets, on interest. Firefox.exe accepts command line parameters that define a web page specific and data to be filled in this page?

  You can start Firefox to open a specific web page or a local file by adding the url to the command line, but you cannot specify the data to display, unless these data does not appear in the page source.

  • https://developer.Mozilla.org/en/Command_Line_Options