Pictures in bursts when the timer is active

Similar Questions

• Problem sending pictures through texting when the WIFI

  I recently move carrier to Cricket wiresless (Yes uses AT & T network) of the Sprint. Since I made the change, I had problems sending pictures through texting when the WIFI. I contacted the Cricket Wireless support and they had me reset the APN settings, he has to work because I also disabled WIFI at the time. Since then, I realized that I don't have the problem, when I cut the WIFI.

  Someone at - it similar problems?

  I found the resolution on Adroid Central:

  Wow! Presented this to the customer service email of Cricket and they responded in 12 minutes confirming:
  Billy M. (Cricket Wireless)
  16 Dec 08:46

  Hi Evan,

  Please contact the Support of Cricket. I'm sorry to hear about the problems you are having with your MMS then on the WiFi. Our team of network has been aware of this problem and is currently working on a resolution. In the meantime, you can use one of the IP addresses below in your MMS proxy under the APN settings that should solve the problem.

  192.168.196.78
  192.168.196.79
  192.168.196.117
  192.168.196.118

  Thank you
  Billy
  Looks like the guys from reddit were correct and the IP addresses are legitimate.

• I want to activate my window vista business, but when the window is activated, I have a problem and it is error code is 0xC004C020

  I want ro activate my vista Enterprise window, but when the window is activated, I have a problem and it is error code is 0xC004C020

  Visit: http://www.microsoft.com/genuine/diag/> and click on "start the Diagnostics.

  `~`

  0xC004C020 error code

  Symptom

  When you try to use a MAK to activate one or more computers, you may receive the following error message:

  0xC004C020
  The activation server reported that the Multiple Activation key has exceeded its limit.

  Cause

  The MAK has exceeded the activation limit. By design, MAKs have a limited number of activations.

  Workaround

  Contact the product activation call center to obtain a new MAK or to increase the limit on the existing MAK activation.

  `~`

  What type of license you have?

  If you have an OEM or FPP product, then you should have your license key on your computer or on the packaging. Contact the Microsoft Activation Center to find out if your product key is valid:

  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4. take the phone activation option and brace yourself for a real person.

  `~`

  During the activation of the phone

  Go to Start

  Click run

  And type SLUI 05

  In the drop-down list, select the name of the country you live. This is important because depending on the country you select, you will assign a number to call.

  Click the nearest location > United States

  Click Next

  This window contains all the information you need.

  Step 1 contains the number you call.

  Step 2 contains a series of unique numbers, you will need to provide the series of numbers to the operator (don't make any mistakes).

  Step 3 If everything is Ok, the operator will provide you with a confirmation ID, you will need to enter numbers in the boxes in step 3 and press ENTER.

  Activation of the telephone process is simple, try to use common sense in his answers.

  If the confirmation correct what ID provided it must be welcomed by a new window confirming a real installation.

  UTC/GMT is 23:00 on Saturday, November 19, 2011

• Having a problem in DateFormat when the time zone is changed...

  Hi, the following code converts a Date string to a Date which I am able to successfully... The problem I am facing is when I put the Moble zone as the format of Casablance (GMT) and my Format for a Date string is "2009-09-27 03:02:00:00 of" "" then I am to get the hour of the date as "kills Sep 27 03:02:00 GMT 2009", but when the time zone is changed to Canberra, Sydney (+ 10), the Date is "Mon Sep 28 19:37:13 Australia/Sydney 2009"... which is not the correct date in strgin Format ' "» nicely in this matter helps no matter what time zone after the conversion, I should get the date given to a string date... help kindly with respect to thei...

  public static Date getDateTmeFrmStrgFormat(String strDate)
       {
  
           Date date;
           String month,day,year,hour,min,sec;
                       month = strDate.substring(0,strDate.indexOf("/"));
              if(month.length() < 2) month = "0" + month;
  
              strDate = strDate.substring(strDate.indexOf("/") + 1);
  
              day = strDate.substring(0,strDate.indexOf("/"));
              if(day.length() < 2) day = "0" + day;
  
              strDate = strDate.substring(strDate.indexOf("/") + 1);
  
              year = strDate.substring(0,strDate.indexOf(" "));
  
              strDate = strDate.substring(strDate.indexOf(" ") + 1);
  
              hour = strDate.substring(0,strDate.indexOf(":"));
              if(hour.length() < 2) hour = "0" + hour;
  
              strDate = strDate.substring(strDate.indexOf(":") + 1);
  
               min = strDate.substring(0,strDate.indexOf(":"));
              if(min.length() < 2) min = "0" + min;
  
              strDate = strDate.substring(strDate.indexOf(":") + 1);
  
              sec = strDate;
              if(sec.length() < 2) sec = "0" + sec;
  
              //sec = "00";
              date = new Date (HttpDateParser.parse(year + "-" + month + "-" + day + " " + hour + ":" + min + ":" + sec));
              //date = new Date (HttpDateParser.parse(year + "-" + month + "-" + day + " " + hour + ":" + 00 + ":" + 00)); 
  
              return date;
          }
  

  Like this.  This code is NOT tested, it is presented only to explain the use of the calendar in this situation.

  public static Date getDateTmeFrmStrgFormat(String strDate)     {         String month,day,year,hour,min,sec;         month = strDate.substring(0,strDate.indexOf("/"));         strDate = strDate.substring(strDate.indexOf("/") + 1);         day = strDate.substring(0,strDate.indexOf("/"));         strDate = strDate.substring(strDate.indexOf("/") + 1);         year = strDate.substring(0,strDate.indexOf(" "));         strDate = strDate.substring(strDate.indexOf(" ") + 1);         hour = strDate.substring(0,strDate.indexOf(":"));         strDate = strDate.substring(strDate.indexOf(":") + 1);         min = strDate.substring(0,strDate.indexOf(":"));         strDate = strDate.substring(strDate.indexOf(":") + 1);         sec = strDate;         Calendar cl = Calendar.getInstance();         cl.set(Calendar.YEAR,|Integer.parseInt(year));         cl.set(Calendar.MONTH,|Integer.parseInt(month)-1);         cl.set(Calendar.DATE,|Integer.parseInt(day));         cl.set(Calendar.HOUR_OF_DAY,|Integer.parseInt(hour));         cl.set(Calendar.MINUTE,|Integer.parseInt(min));         cl.set(Calendar.SECOND,|Integer.parseInt(sec));         return cl.getTime();     }
  

• Calling a function only when the State is active

  I turn to find the event just to call a function only when the status is active. In fact, I created a State to display the 'product details' click and once the system changes to this State - I have to perform a function.
  
  Here's the context:
  
  Let's say that you are on the home page where you will need to click on a product to see details. By clicking on the product, the State to view the details of the product will be activated and a variable inside the new state you will receive all the data (from the class of product). But I discovered Flex run all States at the beginning and we need to watch how declare our function to make sure that we do not have a null to a variable/object reference. Given that value is moving to the State only when the click event to occur, the process of globalization, execution of all States at the beginning will not have any value yet (for the specific product to deal with in the State of the productDetails). So I can't use creationComplete to perform a simple function like setSpecs(), where all the values (for example, width, height, circumference, diameter, price, etc.) will be instiate specific labels.
  
  What event to use to call a function internal once we are in the State? Just using the creationComplet and stated if he check the currentState = that I have to work on is not enough. I tried 'activate', 'show', 'enterStage' and many others, but without success. I tried to search the Internet, but it seems that this problem is not popular enough to generate sufficient results.
  
  But I know that it is possible in the case otherwise it will be is not logical and since Flex work very well with the event, I found the right event. It's something basic I know, but when you do not know, it seems difficult to find! ;-))

  Thanks Greg!

  I agree, this is a better method. So I'll change my SENSITIVITY to use viewStack instead of the State. But the problem persists what that, if we use the viewStack State to launch an event only when the State/viewStack is displayed on the screen.

  I found something that works very well for me: updateComplete.

  First of all, I found this before reading your information about viewStack so it worked very well for the method of the State. That I decided to do a test to viewStack and made the necessary changes to the code to reflect a viewStack navigation and make sure the updateComplete was not within my component (stateProduct.mxml). The system was not able to view the specification as the setSpecs() function was not instantiate when displayed. I added the updateComplete = "{setSpecs ()} ' and everything worked great!" So I conclude that no matter if you are using a viewStack State, the updateComplete event can be used to run or functions only when the component is displayed on the screen.

  Now, I have to make my transition between the State working with viewStack effect! ;-))

  Thanks to Greg for this useful tip!

• White screen when resume from hibernation when the graph is active (DM4)

  I configured and purchased a HP DM4t with 512MB ATI Mobility Radeon (TM) HD 5450 switchable graphicst.  My problem is that when the laptop goes to sleep (for example when I close the lid), it will sleep for a while (I think his suffering at 6 p.m.), after which she'll take back and hibernate itself (hybrid sleep option).  I like this feature because it allows to save battery power, however, when I try to resume from hibernation when the ATI Radeon graphics card is active, all I get is a black screen.  I can connect using the fingerprint reader, (I hear Windows making the connected to the carillon), but I don't see anything on my screen.  If I do this same scenario using the Intel graphics card, I will not have this problem.

  I called HP tech support and their solution was to disable hybrid sleep feature.  I was not satisfied with this solution, because it does not save the battery of the laptop must sleep for a long time.  My solution is to disable auto graphics card change, and I just go to the ATI Radeon manually if necessary.  The problem with my solution is that it forces me to remember to turn off the discrete graphics when I'm actually (I tend to forget).

  Is there a solution to this problem that will allow me to use the gfx ATI card AND the hybrid auto sleep function?

  I was finally able to update ATI graphics driver on my laptop.  This seems to have solved my out of the hibernation problem.  The version of the driver that I'm on is 8.741.1.1000 with a date of version of 21/06/2010.

• Cannot answer calls when the screen is active

  When my screen is active and someone calls, I see the floating bar at the top of my screen with drop or answer displayed. By pressing or the other option has no effect. In the case of lucky and keep tapping answer it could possibly answer the call, but most of the time the person hangs up before he does.

  Start in safe mode and try to answer it.

• Event when the time changes?

  I want to be able to perform a function at an exact time specified by the user. The time will always be an exact hour and minute, so I think that I just need to check once per minute. But, I want it to be just at the point where the minute changes. For example, if a user sets time for '04:30 ' I want the function to run when the clock on the PlayBook goes at 04:30 (preferably as close as possible). But if my timer runs a function listening every minute and it starts between the minutes for example "2:00:30" then he know what "02:01" until he has "2:01:30", exactly one minute after it starts.

  I could run a function on each picture, but I didn't it would be the best way to do it.

  EDIT: I guess the obvious solution for some could be just check once a second, but this really the most effective way?

  Is there some sort of time, or in some other way event listener to do?

  This is not tested, but it might do what you want:

  import flash.events.TimerEvent;
  import flash.utils.Timer;
  
  ...
  
  var secondsTimer:Timer = new Timer(1000);   // 1000 milliseconds or a second delay
  secondsTimer.addEventListener(TimerEvent.TIMER, onSecondsTimer);
  secondsTimer.start();   // start timer
  
  ...
  
  secondsTimer.stop();    // stop timer
  
  private function onSecondsTimer(e:TimerEvent):void
  {
      var currentTime:Date = new Date();  // get current date/time
  
      if(currentTime.getHours() == userSetHour && currentTime.getMinutes() == userSetMinute)
      {
          do something
      }
  
  }
  

• screen saver stopped working setting changed forever appear to work then check the app does not start when the time is in demand

  The screen no longer works check all setting is very good and pictures are included in the window but will not start us time is programmed was working fine but stopped for no apparent reason

  -Try to start safe mode and normal mode then

  OS x: what is Safe Boot, Safe Mode?

  -Then try to delete the .plist preferences system

  Removal of the preference of the system or another .plist file

• Writing data to the file when the trigger is activated?

  Hi all

  I'm quite new in lab mode, and I find it difficult to find a solution to this problem quite simple. I installed a gauge on a tank, and each time, he reached the limit of overflow of the VI should write all data to a file. I implemented my data tables, but I am struggling to find a way to have the VI writing the data when the specific trigger (the tank overflow) occurs. I'm sure the solution is quite simple, but was faced with this during a few days now so I decided to ask for help.

  See you soon,.

  Gasim

  Gasim wrote:

  Seems to work, but the program stops when the trigger activates and asks you a file name to write on and then reset the whole process. Is that anyway so he can write the data automatically, without any interruptions?

  Yes, simply son by the name of desired file in VI of file write. If a cable it won't entice.

• What is the easiest way to toggle meter terminal when the time is up in the complete example of PWM?

  I successfully downloaded and run this: http://www.ni.com/white-paper/2991/en

  and I know it works because I can see the pulse train on channel #1 on my osciloscope.

  I modified the code example from the Web site to use width and pulse rate buttons which can change dynamically:

  

  What I want to do, it's the 'Dev1/ctr1' to choose ' Dev1/ctr0"every 10 seconds.  I studied in the express vi "Time expired" and I am able to correctly count the number of times the elapsed time, however when 10 seconds have elapsed I can't just update input toggle "CO Pulse Freq" with a different counter of entry because he has already spent this object and is busy running in the loop above.  How can I reset the pulse to run with a different counter entry?

  In short, the express VI time works perfectly in itself, but once the time how can I force the restart of the train of pulses with 'Dev1/ctr0?

  Assuming you want to toggle the control from 1 to 0 and all ten seconds back and reset on the other channel... index in the array to write values to one or the other channel.

• Graphic CVI axis only updated when the Panel is active, but updated waveform is in the inactive Panel

  Hello

  I have a problem when I want to save a screenshot of the Panel with the GetPanelDisplayBitmap & SaveBitmapToPNGFile functions. The screenshot of the Panel is done when the Panel is hidden or inactive. Thus drawing events don't have facts.

  Please take a look at the attached screenshots:

  (1) manual measurement and life-saving operation, the saved data is ok

  (2) measure hidden and functioning economy, the saved data is not correct, the axis were not my updates

  (3) bring the Panel forward, axis had been updated

  Is it possible to force an update of the axis without back panel to the front or set it as active panel?

  Best regards

  Vitali

  1)

  

  2)

  

  3)

  

  I think that it is a bug of the CVI.

  This is how it works:

  -SetCtrlAttribute (Panel, control, ATTR_ZPLANE_POSITION, 0);  without this step the axes will be not updated!

  -for each channel {PlotWaveform ;} (.)

  - ...

• U410 - cannot connect after Windows Update after restore factory when the time zone is not UTC-8.

  Steps to reproduce the error:

  1 use OneKey recovery to restore the initial factory settings.

  2. on the initial setup of Windows screen, select a time zone to UTC - 8, UTC (London)

  3. connect to Windows, open the Windows Update control panel and click on "Install updates"

  4 restart the computer to complete the update.

  5. on the login screen, try to connect or shutdown the computer.

  Result:

  Computer is blocked with the only desktop wallpaper and mouse pointer visible. Does not meet all the keys. By pressing the power button sleep machine. Press again on he wakes the machine in the blocked State.

  I have reproduced this problem 3 times for initial help restore every time.

  Wordaround:

  Before starting the factory restore processes, set the clock of system by 24 hours. After the end of the restoration of the factory, set the system clock to the correct time.

  Otherwise, wait 24 hours between a factory reset and try to install the Windows updates.

  Analysis:

  This problem is caused because of the way that Windows stores time. It assumes that the system clock is set to local time rather than UTC. When you use the OneKey recovery system he doesn't know what time zone of the system clock is set on, and so it assumes that it is set to UTC - 8. If it is in fact the UTC value, OneKey Recovery creates files with a time stamp of 8 hours in the future. This causes the Windows Update to fail.

  One step that I forgot to mention, that may be important:

  After the installation of the plant, during the initial configuration screens, I updated the time zone GMT London.

  Since the OneKey recovery uses GMT - 8, this can cause some files to have a timestamp of 8 hours in the future. Maybe if I waited 8 hours before the update of this problem would not occur. I'll test this by setting the clock system for 1 week in the past, make reset factory and then it retroactively to the correct date before the update.

  EDIT: Test successfully. This workaround works.

• Lead to a new page when the time is up

  Hi guys,.
  I managed to get the "Countdown" by using javascript.
  I have 2 doubts
  1. once the time, say 10 minutes more, I get a pop-up indicating that the time is up. When you press the OK button, what I really need, it's a page-re-direction.
  2. the condition that the values that have been seized by the needs of users who will be sent in PDF format without storing in the database
  
  Is it possible, please let me know.
  
  If a question has the answer, it's also ok...

  OK, I think that you are missing the call to the javascript timeout function. Replace the function "repeat" with the one below.

  function redo() {
    secs--;
    if(secs == -1) {
      secs = 59;
       mins--;
    }
  
    document.cd.disp.value = dis(mins,secs); // setup additional displays here.
   if((mins == 0) && (secs == 0)) {
      if (window.confirm("Time is up. Click OK now, else you will be disqualified from the test.") ) {
        alert('OKayed');
        doSubmit('SUBMIT');
      }
      else {
         alert ('Cancelled');
         doSubmit('CANCEL');
      }
   } else {
    cd = setTimeout("redo()",1000);
    }
  
  }
  

  CITY

• Windows media center (vista) makes a gurgling noise in speakers when the display is active.

  Buzzing noise disappears in WMC is reduced to the minimum. In addition, no noise present during the use and display of windows media player or any other application. Only when WMC is displayed. All other inputs and outputs (line, microphone, etc.) are set to 0 and muted. Buzzing noise is not loud, but are noticeable between tracks, or when the song is paused. Noise does not increase or decrease with volume changes.

  Hello

  I suggest you follow the steps below.
  Try to install the latest driver for your soundcard for computer/card mother/sound card provider and check if that helps.
   
  For your reference: updating a hardware driver that is not working properly.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  I hope this information is useful.