-Command prompt Aspnet_compiler

Similar Questions

• How to save passwords after you said 'no' to the command prompt

  How save passwords after you said 'never' at the command prompt.

  I tried again and again and again, and none of the solutions suggested on the internet works. And there is also something too complicated for me.

  Hi, jscher2000:

  Yes it's MARKET! Thank you very much for your help!

  I'm not all pages to remember my password I just want some specific pages to remember passwords. for example. for now I only need craigslist login page to remember my pw, not other login pages.

  If this is the case, then it is a perfect solution for me.

• Re: Satellite Pro C660 - how to do the recovery with command prompt disc?

  I have a brand new Pro C660 of Satellite. It worked fine for a day, now it will not load windows. I don't have to create the recovery disks, as I only had a few hours (Yes, Yes, I know, should have been the first thing I did). All data are present (but backed up just in case USB) and I can see the folder HDDREcovery with all data intact. However, I can't run the application to create recovery discs. Does anyone know how to extract the images and create the media using only the command line? (I can go into command prompt by booting from the Windows 7 disc a friend). All options fail own laptop startup disks. It says 'Windows does not load' and I try startup repair, but it detects no error. Any help/thoughts on this will be greatly appreciated!

  Hey,.

  It of not possible to create the drive with command prompt recovery. You must use the Windows Toshiba Recovery Media Creator.

  Now it s too late for you, but you can order a disc here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Pavilion Elite HPE-170 t: need help with the result of a command prompt to Power Options

  I have recently upgraded to Windows 10 in Windows 7.  Like so many thousands of people, I problelms of sleep mode.  Mine will not be auto-sleep.  It has been suggested that I saw to run command prompt: powercfg-applications

  It supposedly will list the items running on your computer which can now be auto-sleep to work.  I tried several times and up to now, I get the same item displayed each time.  This is what is displayed: \device\harddiskvolume2\windows\sysWOW64\svchost.exe (hpqddsvc) is followed by this message: a file delete operation is underway

  My first thought is that if there is an operation to remove file in progress all the time, it's maybe the reason why my computer is not auto-sleep.  If there is someone out there who can shed some light on this situation, I would appreciate the help.

  EUREKA * SOLVED
  

  I found the answer to my problem!  After using the control system: powercfg-query and get the answer: \device\harddiskvolume2\windows\sysWOW64\svchost.exe (hpqddsvc) delete file operation is in progress

  I started looking for whatever it is associated with the answer above.  In the Manager of tasks in respect of the services, I found the name of the file hpqddsvc, with a description of HP CUE DeviceDiscovery Service was running.  When I stopped the task and re-tried in opt power standby mode, it worked correctly.  In the Configuration of the system (by typing msconfig at the run prompt) on the Services tab, I unchecked the box for HP CUE DeviceDiscovery Service and rebooted the computer.  The service is no longer running.

  I'm sure that this Service has been added to my computer when I downloaded the hp.com/support product detection tool .  The tool scans your computer to detect and identify HP products.

  This can be useful to others who have the problem of the auto-sleep I've had.

• How can I add a Web site to the popup blocker exceptions list by using a command prompt?

  I have a lot of users with Firefox 2. I need a specific web site to allow for pop-up windows if their Blocker is enabled. I need to be able to run this command in a script that runs from a command prompt when the user connects.

  I don't think that you can do.

  However Firefox 2.0 version use a hostperm.1 of text file to store the exceptions.

  See http://kb.mozillazine.org/hostperm.1

• Re: How to run the update to the BIOS of the DOS - Satellite A100 PSAA8A command prompt?

  I'm having some trouble with my GF Satellite A100 (PSAA8A). When installing a new HARD drive with a clean install of XP, I flashed by chance, one of the BIOS when installing drivers. Its kind of bricks now.

  Using a floppy disk CD boot, combined with the update of the V6.00 BIOS, I goes to a DOS command prompt, but not sure where to go now.

  Under * Tradional BIOS update *.
  See the link: [http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS & FID = TRO0000000b07]

  It is said:
  + 1. Extract the zip file containing the BIOS upgrade to a temporary folder. +
  + 2. Three subfolders will be generated in the temporary folder. "docs", "update - 3.5' disc', 'Update - CD - R or CD - RW +.
  + 3. Insert a 1.44 MB diskette formatted in the floppy disk drive. +
  + 4. Run the *.exe file in the folder "" Update - 3.5 disk ". Follow the instructions on the screen. A BIOS update diskette will be generated. +

  But there is no 3 folder. There is only a single called S10VWF that contains Winphlash etc. (see photo url). As far as I know, I can only run Winphlash Windows environment due to its GUI. Then what should I do? Help!

  http://img.Photobucket.com/albums/v259/tRUkbOY/S10SWF.jpg

  Hi Brett

  There is a little thing that you have forgotten or supervised.

  The BIOS you downloaded is a version of BIOS to WIN. It s not traditional BIOS update!

  The description published in your ad describes the update using the traditional BIOS.
  But the Toshiba driver page only provides updates of BIOS based VICTORY. The BIOS can be upgraded only from Windows operating system running.

  Please don't mix these two possibilities of updates!

• Satellite keyboard is not working and flashes the command prompts

  Hello world. I hope someone can help... my laptop has suddenly decided to some how turn off the keyboard. No key does not work. The touchpad mouse seems to work very well. Started once w7, a lot of windows boxes flickers between them. Command prompts to do the same thing and I cannot click on any admin agrees with the cursor ect.

  He will not simply accept. I tried the system restore ect but cannot place orders, when similar probs in Device Manager. For example, the cursor jumps oddly at the bottom of any list that I pull up and I can't ride him. The same things happen with another hard drive in the laptop. I scanned with several brands of security too... clear at all. IM wondering if its hardware, not software.

  I even re formatted the hard drive of w7 since another laptop and started again but still the same thing. I have also attached another keyboard to the live system with the same problem. USB keyboards work but still control problems. USB mouse even.

  Thanx

  I understand your question, the internal keyboard does not work, but you can use the external USB keyboard properly... don't you?

  Well, in this case, the question is clear to me: the problem is caused by the fault of the internal keyboard.
  From my point of view of the few he has no alternative option but in order to replace the internal keyboard.

• Satellite L - can I add new accounts via the command prompt?

  Is it possible that I can add new accounts to the machine via the command prompt on the screen of "recovery"?

  (When you start in recovery mode and select command prompt)

  I tried the normal commands "net user username / add ', but the accounts are not added to the machine.

  Y at - it another command which can be used?
  Thank you.

  Hello

  I don't know if it will work using the in my opinion Mr. recovery console, it is not possible.
  As far as I know that you can add the user and the password using the CMD, but this might work only when the Windows operating system has been loaded.

  In this case, you can use this command to add the user account: + net user username / add +.
  If you want to add a password for the user account, then you must use this way: + net user username password / Add +.

• ReadyShare drive unusable in the DOS command prompt

  I have a Nighthawk C700 - AC 1900 WiFi cable router Modem where I configure drive ReadyShare USB access.

  When I type the UNC "\\READYSHARE\USB_Storage" and type the Admin password for write access - I "can" see the files/disc in Windows Explorer. I can map the UNC path as a player U:\ and I can see/access it very well in the GUI.

  However...

  Once I go to a CMD command prompt (even tried as admin) - I see 'no' this player U:\. Error message = "system cannot find the drive specified."

  ReadyShare drive is a USB 2.0 disk formatted in Win7 to NTFS 2 TB external.

  I'm on Windows 10 v1607.

  If I connect the USB directly to my computer - I can see/access this drive U:\ locally and use the CMD utilities against it very well (robobopy.exe).

  Anyone working on this issue and or knows how to get CMD to use/see the ReadyShare full-access/write?

  Thank you...

  Peter

  Update: it's working now. ?

  I've upgraded to the latest version of Windows (1607.14951.1000) 10.

  I also upgraded Netgear engineering to v2.4.32.

  I "can now use/see the drive Readyshare in a CMD Shell."

  I can run normal DOS commands on this very well mapped drive.

  I had to modify my script robocopy to remove the /COPYALL and /ZB settings as I guess that Linux/NAS does not support these settings, but I can now, with the click of a shortcut on the Desktop - Sync/restore my files the on the network to the NAS drive.

  I don't know if it's the change in Windows or in engineering who has been around.

  hope this helps others too.

• How to hide the command prompt window when using exec system

  Hello, I use the exec system VI to do some transfers of files for a LabVIEW application.  I'm afraid that the black white scroll text command prompt window that appears when exec system is called might scare users this LabVIEW application non-tech savy.  Is there a way to hide the command prompt window?

  Feed a REAL running reduced entry.

  Mike...

• Execution of multiple lines of command at the command prompt (windows)

  Hello

  I'm vascular using the command prompt in the windows to try to send a command to the microcontroller that is connected through TCP connection.

  I am able to use the normal cmd.exe to send the command but I am unable to send the command all successfully using labview.

  The Vi. I use the exec.vi system found in the labview connectivity section.

  Basically, I want to send is 'telnet A1' motion in the cmd.exe to establish a connection to the microcontroller, followed by "For A1 100 GO," which will be performed by the microcontroller to do what is necessary. But currently, the problem is that I can only establish a connection using the exec.vi system but can't send the second part of the message 'for A1 100 GB".

  My command line, I tried typing is cme.exe /K telnet A1 & for A1 100 GB. It seems that labview is only able to run the first part of the command. Y at - there no alternatives?

  Thank you for all your help.

  I suspect that there are problems of synchronization with this code. Forst, you should clean it to the top because it is very difficult to follow. Cables are hidden under objects, this is a lot bigger than a view type and the code is usually very disorganized. I also suggest that you look at using a state machine, but also a structure of the event to intercept the user interface events such as the Start button.

• Update Live from the command prompt

  Hello

  I create an executable whose purpose and to make the creation of a winPE bootable USB key easier.

  To create the key, I need to run multiple commands with the systemexec.vi. Many of these commands take ages at the end so I need to know whether or not the command is still in progress.

  What would be great is to have a live update from the command prompt. I guess there should be a way to insert the command line in a secondary or other container?

  

  Best regards

  Try to redirect the standard output to a file, as in this example:

  ping 192.168.0.46 > out.txt

  If your utility supports redirection, you can read the contents of the file at any time.

  Be careful to choose a working directory where your username has write permissions.

• command prompt in the start menu goes directly to the control box black small and not big box

  Page product HP supposed to go to the start menu and type command prompt and choose Run as administrator.  There was a break in the screen of the typical white box with blue borders with a list of options.

  I typed in it and click on command prompt and I immediately had the window of small black command promt.

  I had to end up with a box by C:\. SFC\ and type SCANNOW after the.

  I can only see C: \USERS\OWNER >

  How can I get the usual box of options?

  Hello viewerx. C: \USERS\OWNER is always the default value in Windows Vista or later, even if you change it manually. You try to perform a file system check? If so, the command is "sfc/scannow" without the quotes.

  If you have any questions or concerns, please let me know. I'm only here to help!

  Mario

• LabView program in command prompt

  Hi all!

  First of all, here is my config:

  -Dev PC: Win 7 32-bit

  -Target PC: Windows XP - 32 bit

  -LabView 2009 - 32-bit

  I need to design a program which one will be interfaced with an ERP. So it should not have a GUI and must be controlled by sending to command (MARKET / STOP / ABORT...) and send some status info (data of 10 or 15). For now, I'm only able to launch my program of command prompt and of the arguments passing. But I'm not able to send orders after this and disable the HMI.

  Is it possible to do it with LabView? If yes how? If not, how can I interface my devices to LabView and manipulation program of these devices in another type of program that allows you to do?

  Best regards

  Harold.

  On the only way that I know of to two programs to reliably talk to each other is using TCP.

• Run as administrator command prompt using the exec.vi system

  I have an application that will not open unless it is executed via the administrator command prompt.  I found a way to add a shortcut on my desktop to open (Administrator: elevated command prompt) but do not know how to open programically this program.  Does anyone have a quick and easy solution to this?  I want to open the administrator: elevated command prompt and then start writing my orders.

  Thank you!!

  Difficulty with the command line: cmd/r 'Elevated Command commandes.lnk ".