'command R' does not work, I can not restore the OS

Similar Questions

• Firefox 34 does not restore the previous when tabs restart

  Hello

  After that I updated to 34.0 FF, whenever I restart my FF, it does not restore the Forelegs. Instead, he opened all my home pages.

  I went to look in the history and all the following features are grayed out: tabs to other devices; Restore previous Session; Recently closed tabs and windows recently closed.

  I went to my profile folder and found the "sessionstore-backups" folder and in it, there are two files: recovery.bak and recovery.js, both showed the latest date and time. And there is no file "sessionstore" anywhere in the profile folder.

  My question is: why are all the options under history is grayed out? I used the "Undo Close Tab" modules, but it does not work. When I click on the shortcut menu, nothing happens.

  I searched on this forum about this issue, but none of the solutions worked for me.

  Suggestions or comments are much appreciated. Thank you.

  OK, here's my latest:

  I created a new profile, copy ALL the folders and files from my old profile into it. So I delete all the files except the last one pref.js. Start FF with the new profile, guess what, everything is back to what is supposed to be.

  1 restore previous Session and recently closed tabs both work now on the history tab.
  2. I can connect to all my accounts from Chase, without using IE Tab.
  3 file and release working again.

  So, it seems that all the old files pref.js were the culprits here.

  Thanks to FredMcD and cor - el for all of your kind cooperation.

• My command prompt does not recognize the command h

  I have Windows 7 Ultimate and I tried to solve a problem without report with generated by an SD card (content appears to be empty on computer, but the exhibition of photos on a camera). Among the solutions proposed on my card SD card problem was the one who needed to enter my cmd/d/s s h commands, but I returned the text <"-h" is="" not="" recognized="" as="" internal="" or="" external="" command,="" operable="" program="" or="" batch="" file="">. I checked the path environment variables and that it contained the system32 folder, so I would know what to do in this case. What is the problem and what is the solution for it.

  I might add that I have no programming knowledge whatsoever, so I'll probably need more detailed assistance. Will you please and thank you!

  I have Windows 7 Ultimate and I tried to solve a problem without report with generated by an SD card (content appears to be empty on computer, but the exhibition of photos on a camera). Among the solutions proposed on my card SD card problem was the one who needed to enter my cmd/d/s s h commands, but I returned the text <"-h" is="" not="" recognized="" as="" internal="" or="" external="" command,="" operable="" program="" or="" batch="" file="">. I checked the path environment variables and that it contained the system32 folder, so I would know what to do in this case. What is the problem and what is the solution for it.

  I might add that I have no programming knowledge whatsoever, so I'll probably need more detailed assistance. Please and thank you

  Hello

  H s/s/d are all optional parameters can be used with a command.

  To view all the possible settings for any particular command, type the command followed by /?.

  Example: The Attrib command.

  In the command prompt, type attrib /?  Press on Enter.

  You will see the following results.

  

  This screen explains what the command Attrib and shows all the optional parameters that can be used and what each parameter is.

  Command-line reference:

  http://TechNet.Microsoft.com/en-us/library/cc754340.aspx

  Command prompt: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows/command-prompt-FAQ#1TC=Windows-7

  Concerning

• Why the firefox profile is messed up and does not restore the tabs when you replace the Windows shell with something like bbLean

  I use Windows 8.1 x 64 but I can replace the Explorer bblean shell and when I do that firefox has issues with the profile such that cancel last closed tab or not to restore the tabs at startup.
  I was able to use the replacement of shell of bblean for years in previous versions of Windows, but he always had a weird behavior with firefox. Of course, I am currently in contact with bbLean developers working on the problem, but I would also like to hear what may be the cause of this.
  Thank you in advance.

  @guigs2
  Thanks for responding but I solved it somehow.
  'Replace the shell' means that I have deliberately change value in HKCU NT\CurrentVersion\Winlogon\Shell so it does not point explorer.exe but blackbox.exe.
  After the reset of my installation of windows and get rid of all programs, including firefox now I use firefox portable (not installation of vanilla from the original site) and found, I have no problem with profiles so far.

• Does not restore the values of form for the restoration of the tab

  Part of my Web site uses a large number of forms on a single page. On the page, you can filter items (each item has its own form) and modify them. One entry looks like this: [name] [select status] [other Select]. Other important things are that the document has an expiration date in 1981 (to apply a page always up to date) and that change the value in the select results in the triggering of an AJAX function.

  It works perfectly, except for one thing. When filtering State id 1, you get back a little of the element. Let's say that the result of the filter are input 5. Change entry #2 status, which triggered an AJAX function. It works very well, but here's the problem: when close the tab and re-opening with Restore tab, select values become disheveled.

  Due to the execution of a fresh copy of the page, the browser will get a new copy of the page. Entry #2 is now gone (I'll keep calling it that, even if she disappeared because of the filter). Now, here's the problem: Firefox is attempting to restore the value to select it. Entry of the status #3 now has the same status of entry #2, #4 a #3 status and so on.

  I managed to solve this problem on other browsers (Chrome, IE) with this little piece of jQuery:
  {$(document) .ready (function ()}
  {$("form[class^='startingformname']").each (function ()}
  This.Reset ();
  })
  });
  It works perfectly, except for Firefox, which seems to ignore the call to reset...

  As this text is quite long, I'll keep my short question: How do you keep Firefox restore the values of the form (preferably: keep them on the selected item in the HTML)? Now, the user always gets a new copy of the page, and Firefox is trying to restore the old values on this page, even though the HTML code has changed.

  I think your two choices is:

  (1) prevent Firefox from page caching, or
  
  (2) use a different event to trigger your reset function

  As I understand it, the function $(document) .ready jQuery () raises the event DOMContentLoaded (or equivalent, if not supported by the browser). If the tab is cached in its ' cache fast back-forward ", Firefox can not fire this event when the user returns to the tab, just like Firefox does not always raise the load event in such cases.

  Discover the event more described in the following article and see if you can use it to trigger your reset function in Firefox: https://developer.mozilla.org/docs/Using_Firefox_1.5_caching

  Who is?

• does not restore the system files after clean install

  When I click on the HARD drive which has my backup file, it says that "windows could not find and backup sets on e:\.» Please selection elsewhere. "When I click on"Refresh"this disc shows up... again.  When I look at the contents of the disc there is a file named: N360_BACKUP, however it will not recognize it, so, not restore it.

  Is there another way to restore my files? I was really counting on this form of backup, and if I can't restore it, I lost all my emails, email addresses, contacts and favorites for the past two years, no to the meniton photos, music, etc.

  I have looked at similar positions here and tried the suggestions in them with no luck.

  Hello Terryjoe,

  Thank you for your message.  The N360_Backup referred to Norton 360.  We will be more than happy to help you to restore your data, please answer a few questions first well.  What version of Norton 360 backup/restore are you using?  Below are the steps for version 2:

  1. go to the folder C:\Program Files\Norton 360\Engine\3.x.x.x, you will find a tool Arestore.exe (3.x.x.x allows 3.0.0.134 or 3.0.0.135 depending on your version)

  2. navigate to the folder C:\Program Files\Norton 360\MUI\3.x.x.x\09\01, you will find an Arestore.loc file ((3.x.x.x allows 3.0.0.134 or 3.0.0.135 depending on your version)
     
  3. copy Arestore.exe and Arestore.loc to the root directory where you saved the backup created using Norton 360 (the long file aside the N360_BACKUP) and run Arestore.exe.  It will look in the N360_BACKUP folder to your backup set.

  In your case, you must copy Arestore.exe and Arestore.loc to the external hard drive where you have the file N360_BACKUP. Double-click on Arestore.exe, it will work and restore all your saved data.

  If this does not work, go to the next series of steps...

  4. If she fails to find your backup set, you must delete the corrupted catalog file.

  To delete a catalog file corrupted, go to the N360_BACKUP folder.  There should be a folder with a long alphanumeric name, open that folder.  You can see a file named backup.@db.  It is the catalog file.  You must move this file in this directory (put on your desktop for added security).

  5. Once backup.@db has been deleted, go back and try to run Arestore.exe from the root directory.

  Note: This process may take some time.

  http://community.Norton.com/Norton/board/message?board.ID=Norton_360&message.ID=14505

  See you soon

• Firefox does not restore the previous session in the same window?

  Hello

  Everytime I open Firefox and click on the button restore previous session inside that nothing happens. This is the first part of the problem. Then, when I click on my history and click on restore previous session, it does but they will open in a new window. Ago only 3-4 days it started to arrive. I would like to change what is causing this back to how it was such that it is quite annoying when I pinned tabs and I have to keep re pinning.
  I am running the developer version of Firefox.

  Thank you.

  Turns out after some updated, it resets some general settings include the opening to the top of the front legs "at the start of Firefox Developer Edition:

• System Restore does not restore the susccessfully, the restore point was damaged or removed during the restoration

  How am I to fix this?

  Just a dinosaur on the computer!

  Thanx

  Hello

  
  (1) what is the operating system that you use on the computer?
  (2) what is the reason for you to do a system restore?
  (3) do you have other problems with your computer?
  
  Method 1:
  (1) you can try to restore your computer to a restore point different from refer the below link:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
  (2) you can also check out the link below:
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
   
  Method 2: Try to do a restore of the system in safe mode by following the link below:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
  I hope this helps!

• Windows 7 Defrag from command line does not work

  We are running Windows 7 in a virtualized environment. When you run windows defrag hourly use of the command line, it does not work. The order that I will execute as administrator is

  C:\Windows\System32>defrag/c

  Microsoft Disk Defragmenter
  Copyright (c) 2007 Microsoft Corp.

  It displays the above message and leaves back to the command prompt. However if I run the defrag C: command it does not. Defragmentation from the GUI works so as long as both drives (C: and system reserved) are selected and when I click on defragment drives, works very well.

  I am concerned about defrag from the Task Scheduler with the command ' defrag/c' (self programmed to help set up the calendar... from Disk Defragmenter) does not work and the system never gets defragmented automatically.

  This only happens with some of the windows virtual machine 7 we have.

  There are no entries in the event log that point to defragmentation (using the Task Scheduler). Anything can happen on the ideas?

  Hello Sebastian,.

  Thanks for posting your question on the Forum of the Microsoft community.

  The question will be better suited to the audience of it professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. How to fix?

  After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. It works well to return to the grid when in the develop module. The problem was not resolved with LR 6.2.1.

  PS: Being a urser LR since 2008 I hate the new import dialog so I have stopped using the program and will do so until the classic dialogue is back. Or it won't and I should start looking for alternatives?

  Rune

  One number of others have experienced this problem - please add your vote and details of this bug report in the Adobe official feedback forum: Lightroom: keyboard shortcut 'G' does not not in the library module.

  A few others have reported that restart the computer immediately after resetting preferences seems to fix the problem.  Also note that you can use the ESC key to exit the view library Loupe return to the display of the grid.

• I can't download to work - it does not copy the mp3 files to my location (as defined in tools/options) - it gives me a new window with a player - no dwnlo

  I am running windows xp sp2 and I put my site to dowload under (Tools/options), but when I select an MP3 file to download, firefox does NOT copy the file to my location of choice on my HD - instead, it opens a new window with a 'player' of fortune and starts to load the player with the MP3 file. The problem is that I have no idea where on my system, firefox has copied this file, so, I can't leave and come back later and read this MP3 file using winamp. I need to hear right then or lose - if I close this new window (with this puny little ' player'), then I lose the download, there where to put firefox on my PC (I have no idea where it is). It's all under firefox 25.0

  I also use FIrefox 12.0 on an older windows 2000 machine and that works perfectly - I can download any MP3 file, I want to, and downloads of firefox 12.0 (on win2k, sp4) to my location (on my HD), and it gives me the download window so I can watch its progress and have some control over break and resume , and, when it's done, the download window offers me the option 'open containing folder' so I can make sure that where I wanted. In other words, Firefox 12.0 on WIn2k, sp4 works better than firefox on winxp sp2 25.0! What gives? I went through and set up my options for XP just like I did with Win2k and everything looks good, but firefox 25.0 don't know just my chosen and always default place to give me fortune player and I am not able to actually copy the mp3 files on my hard drive - it's firerox almost unusable 25.0 since downloading mp3 files is a big part of my use firexfox - please help. I am not able to upgrade windows at this time, and since firefox 12.0 still works fine on win2k, I do not understand what has happened to firefox?

  Hello littleberry, you can click on the link that leads to an mp3 file or right click on the drive in firefox and choose to download the file like that...

• On another PC I want to save my favorites, but my browser Firefox does not work how can I make the backup, before I reinstall Firefox

  On another PC I want to save my favorites, but my browser Firefox does not work how can I make the backup, before I reinstall Firefox.
  Firefox cannot renew its tabs and now won't run and let me do a backup

  This may be considered to be solve my problem.
  I decided to uninstall the rogue program Firefox download and reinstall the same version (No. 8). I used Windows XP Add Remove programs who asked if I wanted to save the settings of Firefox until I uninstalled Firefox. I said yes and operated with the uninstall. I couldn't find a Firefox 8 so I went for the 12 version and installed on the laptop. This version 12 now works with all the passwords one favorite of the uninstalled 8.
  Thank you for all your help and advice.

• I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the

  I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the file at all, I tried to turn the file. Fortunately, he rotates the photo and turned it back. Why the program allow me to create layers?

  You click on Expert in pse before trying to add layers?

  Or it is possible that the image is 16-bit/channel.

  In photoshop elements go to Image > Mode and click on 8-bit/channel and see if that makes a difference.

• After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but not joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing work

  After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but still no joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing works. WHAT?

  Print to Adobe PDF? Why the * & ^ * & ^ V_ $ didn't pay a lot more money to Adobe for an Adobe program that does not work with another Adobe program? Oh, right--they want to move me up (buy) the new Adobe graphics programs. I'll keep sweating this point and will no doubt wind up forking over a thousand$ $$ or so for 'new' stuff I don't need.

• Hello! I restored my iPhone 5 because IOS 9.2 does not work well, and now the IPhone does not recognize the SIM CARD ☹️ please someone help me! What can I do?

  Hello!! Recently, I have restored my iPhone 5 because IOS 9.2 does not work well. But now my iPhone does not recognize the SIM CARD.

  I Don' t know what to do, help me please

  You get an error message?

  What did he say?

• my task manager on windows vista family premium does not show the tabs before and used to work properly.

  my task manager on windows vista family premium does not show the tabs it used to, when I used to open the Task Manager it would be things like 'process' 'services' 'preformance' ect. in the tabs. but now when I open it it shows just a window that has two columns, one labeled task, and other labeled status. It shows what im running, but there any options at all as the winger treat ect. the window is not even an exit or minimize the icon as other windows are in the upper right. the only way to close it alt f4 do - what I do? Ive already tried to restart the computer, and I'm on the only account to administer it. I have a screenshot of the new manager of task here: http://i1119.photobucket.com/albums/k621/a_bakedpotato/vistataskmanagerisue.jpg

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  I hope this helps. Good luck.