command z does not not mac 10.10.5 PSC 6

Similar Questions

• Windows 7 Defrag from command line does not work

  We are running Windows 7 in a virtualized environment. When you run windows defrag hourly use of the command line, it does not work. The order that I will execute as administrator is

  C:\Windows\System32>defrag/c

  Microsoft Disk Defragmenter
  Copyright (c) 2007 Microsoft Corp.

  It displays the above message and leaves back to the command prompt. However if I run the defrag C: command it does not. Defragmentation from the GUI works so as long as both drives (C: and system reserved) are selected and when I click on defragment drives, works very well.

  I am concerned about defrag from the Task Scheduler with the command ' defrag/c' (self programmed to help set up the calendar... from Disk Defragmenter) does not work and the system never gets defragmented automatically.

  This only happens with some of the windows virtual machine 7 we have.

  There are no entries in the event log that point to defragmentation (using the Task Scheduler). Anything can happen on the ideas?

  Hello Sebastian,.

  Thanks for posting your question on the Forum of the Microsoft community.

  The question will be better suited to the audience of it professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. How to fix?

  After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. It works well to return to the grid when in the develop module. The problem was not resolved with LR 6.2.1.

  PS: Being a urser LR since 2008 I hate the new import dialog so I have stopped using the program and will do so until the classic dialogue is back. Or it won't and I should start looking for alternatives?

  Rune

  One number of others have experienced this problem - please add your vote and details of this bug report in the Adobe official feedback forum: Lightroom: keyboard shortcut 'G' does not not in the library module.

  A few others have reported that restart the computer immediately after resetting preferences seems to fix the problem.  Also note that you can use the ESC key to exit the view library Loupe return to the display of the grid.

• Macintosh: Adobe Muse; Formular Widget: Send button in Firefox does not (Mac, PC). Works in Safari (Mac) IE (PC). What is going on?

  Macintosh: Adobe Muse; Formular Widget: Send button in Firefox does not (Mac, PC). Works in Safari (Mac) IE (PC). What is going on?

  Test URL: News

  Greetings from cold Switzerland...

  Beat

  I think you have solved, as I tested it on my end and the Send button worked fine.

  Thank you

  Sanjit

• system files and command prompt does not work

  For the last two weeks, I'm having a nightmare. I disabled system restore and when I turned it on again every thing had stoped working (microsoft word and works procedssor), the user account micxrosoft help and support).

  I tried using command prompt, but it does not work properly. When I typed in the shadow of the list he has the right to copy, my name and disturbing without clichés present in this system.  When I go to system restore I just get ablank screen white. If I go into system the control panel says that my C drive is followed.

  I don't know what else to do Windows XP came with the perchase of my little computer. I only am not computer savvy very please check all instructions fool proof. Please HELP, as all I want for Christmas is saystem restoration. Thank you very much

  Please provide additional information on your system:
  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
  It seems that your system has or has had a malware infection.

  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine...

  You should be able to get your system restore calendar works again quite easily, but who will not only relieve your system of malware.

  Don't forget to fix the problem and the difficulty not only the symptom of the problem.

  If you disabled the system restore and he turned his back, which removes all points existing restoration (this is how it is supposed to work).

  I run a few scans of such malicious software indicated below, then work on all the remaining issues.

  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.  System Restore is sometimes so afflicted, you need to reinstall the system restore (you don't have to reinstall XP - just reinstall the system restore).
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  Restart your system and resolve outstanding issues.
  If your system restore calendar is always to show just a blank white screen, do the following:
  The scans using own it may also be necessary to re-register some dll (or you can do this part first, but you still have to do the scans).

  Re-record the dll is correct, even if they do not need re-registration.  You can also re-register the dll before the scans that can solve the problem, but the scans are always recommended.

  Click Start, run, and in the box enter orders following one at a time.  Click the OK button to execute each command one at a time:

  regsvr32 jscript

  regsvr32 vbscript

  regsvr32 /i mshtml

  The last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.

  Check your system restore calendar now.

  Do, or do not. There is no test.

  Someone please tell me how to make figgy pudding like these kids keep saying they won't until they get some.

  I decided to implement the points for a new puppy instead of a pony!

• Command sets does not not on ACS 5.1

  I'm under ACS 5-1-0-44-3.

  I have everything works correctly on ACS 5.1.  I want to implement the sets of commands for specific users and groups.  Under access-> Device Admin-> authorization policies I have order selected sets.  The provided cisco is DenyAllCommands.  I have this command set running on all groups and all groups is still able to issue any order they wish.  I also have a set of commands "show_only' that I issued a group and they are still able to do t conf or any other command.

  Am I missing something?

  Do you need to reference the set name command under the profiles of the shell?

  His I understand all you have to do is reference in "Authorization" in the rules under device admin.

  I can understand a defined custom command does not not because of user error but DenyAllCommands should work.

  Anyone have any ideas?

  I have re-patched GBA

  Stopped and started services.

  And it seems that the sets of commands is the only one not referenced in newspapers

  paste your router config AAA and check in authorization Ganymede + aaa if orders are checked and so on.

  concerning

• apply the filter command button does not

  Hello experts, I have the code to apply the filter of order button below, but when I click on the command button, it runs under code but works.   Array is not be filtered:

  {} public void applyTableFilters (ActionEvent actionEvent)

  FilterableQueryDescriptor qd = (FilterableQueryDescriptor) myTable.getFilterModel ();

  QueryEvent queryEvent = new QueryEvent (searchResultTable, qd);

  myTable.queueEvent (queryEvent);

  AdfFacesContext.getCurrentInstance () .addPartialTarget (myTable);

  }

  < af:commandButton text = "ApplyFilter".

  ID = "applyFiltersCB" styleClass = 'blue '.

  actionListener = "#{viewScope.myBean.applyTableFilters} '"

  Binding = "#{viewScope.myBean.applyFilterCB} '"

  immediate = "true" >

  < / af:commandButton >

  < af:table value = "#{bindings.myList.collectionModel}" var = 'row' "

  Rows = "#{Bindings.myList.rangeSize} '"

  emptyText = "#{bindings.myList.viewable?" "{'No RECS found': 'Access Denied.'}".

  fetchSize = "#{bindings.myList.rangeSize} '"

  disableColumnReordering = "true" rowBandingInterval = "1".

  inlineStyle = ' height: 400px; "

  filterModel = "#{bindings.myListQuery.queryDescriptor} '"

  queryListener = "#{bindings.myListQuery.processQuery} '"

  filterVisible = "true" varStatus = "vs."

  selectionListener = "#{viewScope.myBean.currentSelectionListener} '"

  rowSelection = "#{viewScope.myBean.rowSelectionMode} '"

  ID = "t1".

  Binding = "#{viewScope.myBean.MyTable}" >

  < af:column sortProperty = 'year' filterable = "true" sortable = "true".

  shortDesc = 'AnnΘe Prg'

  headerText = "Year" Prg"id = 'c4' >

  < af:outputText value = "#{row.yearCode}" id = "ot6" / > "

  < f: facet = name 'filter' >

  < af:inputText label = "" id = "it1" shortDesc = "Prg Yr Filter" "

  value = "#{vs.filterCriteria.yearCode} '"

  maximumLength = "5" >

  < / af:inputText >

  < / f: facet >

  < / af:column >

  ......................................

  < / af:table >

  Appreciate any help.

  Finally it worked.    The question is the table PPR using backing bean does not display the filtered data rather than it shows full data.  If I use UI PPR, then apply filter method works very well.

• SRA command "queryInfo" does not return a response

  Hello

  Try to install NetApp SRA in MRS.  SRA detected the NetApp controller at the remote site, but I'm not going on the local site.  I always get this error message: cannot load the SRA to "C: / Program Files (x 86) / VMware/VMware vCenter Site Recovery Manager/storage/sra/ONTAP '." SRA command 'queryInfo' na not return a response.

  I tried to uninstall/reinstall SRM, SRA, Perl: nothing changed.  If anyone has any idea on what could be the problem, it would be great to share it here.

  Thank you

  Hi JD,

  Thank you for your comment.  The service does not start with the local administrator account, but with a domain account that is a member of the administrator group local in the service started, SRA in functional in SRM.

  I guess that the system account is missing certain rights...

  Thank you very much.

• Lightroom DNG "Edit In" Photoshop CC 2014 5.5 does not (Mac)

  I just upgraded to 5.5 of Lightroom and Photoshop CC 2014 today and now in Lightroom when I select a DNG file and click "Edit in Photoshop CC 2014", Photoshop appears but nothing else happens. The file does not open.

  I can copy the DNG file to my desktop and open it with Photoshop directly and that works. In addition, by selecting a PSD file in Lightroom and make the "Edit In" Photoshop work. Only with files DNG is 'Edit In' inoperative.

  It worked before the big update of today.

  Any ideas? Thank you!

  Lightroom 5.5 (Camera Raw 8.5)

  Photoshop 2014.0.0 (Camera Raw 8.5.0.236)

  Mac OS X 10.9.3

  Just after I posted my question, I thought to uninstall Photoshop CC 2014 and reinstall it. That fixed it.

• Whose action command button does not redirect me to another page. Why?

  Hello
  
  I have a command button in a jspx page and an unlimited workflow with two pages, where there is a rule of flow control between them, which needs to redirect the user from the first page to the second page. However when the user clicks the button, the updated page actually without having to navigate to the second page. Why does this happen?
  
  Here are the details:
  
  ADFC-config:
  
  <-flow-control id rule = "__42" >
  <-activity-id id = "__43" > first < /-activity-id >
  < control-flow-case id = "__44" >
  < result id = "__49" > go < / de-results >
  <-activity-id id = "__45" > second < / to-activity-id >
  < / control-flow-case >
  < / control-flow-rule >
  
  command button:
  
  < af:commandButton text = 'Go' id = "cb1" action = "go" / >

  Well, can you give more details?
  Jdev version?
  You start the app with a url ending with ".jspx' by chance?
  If so, you must remove this ".jspx" ending as it does not start the workflow.

  Timo

• 'command R' does not work, I can not restore the OS

  iMac11, 2

  OS X 10.8.5

  3.06 GHz Intel Core i3

  4 GB at 1333 MHz RAM

  Macintosh HD 999,35 GB

  HD EXT Toshiba 749,81 GB (Time Machine)

  Unfortunately, I installed "Guardian of Mac". Although I have not activated my iMac has become very slow. Someone told me that I could solve the problem by getting the old version of the Time Machine OS. I tried several times, but the 'command + R' didn't work. He starts trying to connect somewhere (globe spinning on the screen) and after about 15 min, the Apple logo appears on the screen and stays there forever and nothing happens. He was supposed to appear a window of the utility of choice, isn't it? Can you help me, please?

  Thanks in advance.

  José Francisco

  If your profile is correct and that your Mac running 10.6.5 then there not a Partition recovery which is required for the command + R to work.

• When you try to import the bookmarks to an html file, the command import does not appear in the toolbar.

  I have a desktop Mac running 10.7.5 and tries to import favorites from Firefox on an old Mac running 10.3.9. I exported the file to bookmarks to a file html with success and copied this file to the new Mac.
  The suggestion of using Firefox, I then tried to import the bookmarks into the html file but when I went to the bookmarks toolbar, there is no import option of any kind shown to proceed to the next step. What's wrong?

  In bookmarks (library) Manager is a tool bar with back and next button and three other buttons (organize, view, import, and backup).

  • The first button (gear) is organizing with base change the menu items for the bookmarks
  • The second button is the button in the view which allows you to change the sort order for the visualization of the purpose (sort is not permanently).
  • The third button (Star) is the import and backup button that allows to save and restore a JSON backup and import and export an HTML backup and import bookmarks from other browsers.

  Place each button to display the ToolTip or click on each one to see what they do.

  • https://support.Mozilla.org/KB/how-do-i-use-bookmarks

• Photosmart 7520 does not Mac since Yosemite print

  My 7520 continues to run wireless on my home network to print from a computer laptop Windows 7 and via an iPhone 8 ongoing iOS AirPrint.  But it stopped working with my desktop Mac since installing OS 10.10 Yosemite yesterday.

  After the installation of Yosemite, I also installed v3.0 available in the App Store HP printer drivers.  The Mac indicates now "the printer is not connected", and in the print queue, my print job appears "Printing - in search of printer".  When I open the preferences system, printers and Scanners, printer appears but cannot read ink levels and the utility cannot connect to the printer.

  I have reset the printing system, downloaded again the version 3.0 drivers and reinstalled them.  The 7520 appears in printers and scanners so I can press on the + to add the button, but the system again said that it cannot connect.  The HP lists utility connection type such as Hello and the driver "HP inkjet 4 4.2.1 driver", but the other entries as a model, ID Service, etc., are listed as 'unknown '.

  Would be grateful of any advice to resolve this; Thank you.

  The solution seems to be to turn off the power to the printer, Mac, and router and get them all again.  Working so far.

• My command prompt does not recognize the command h

  I have Windows 7 Ultimate and I tried to solve a problem without report with generated by an SD card (content appears to be empty on computer, but the exhibition of photos on a camera). Among the solutions proposed on my card SD card problem was the one who needed to enter my cmd/d/s s h commands, but I returned the text <"-h" is="" not="" recognized="" as="" internal="" or="" external="" command,="" operable="" program="" or="" batch="" file="">. I checked the path environment variables and that it contained the system32 folder, so I would know what to do in this case. What is the problem and what is the solution for it.

  I might add that I have no programming knowledge whatsoever, so I'll probably need more detailed assistance. Will you please and thank you!

  I have Windows 7 Ultimate and I tried to solve a problem without report with generated by an SD card (content appears to be empty on computer, but the exhibition of photos on a camera). Among the solutions proposed on my card SD card problem was the one who needed to enter my cmd/d/s s h commands, but I returned the text <"-h" is="" not="" recognized="" as="" internal="" or="" external="" command,="" operable="" program="" or="" batch="" file="">. I checked the path environment variables and that it contained the system32 folder, so I would know what to do in this case. What is the problem and what is the solution for it.

  I might add that I have no programming knowledge whatsoever, so I'll probably need more detailed assistance. Please and thank you

  Hello

  H s/s/d are all optional parameters can be used with a command.

  To view all the possible settings for any particular command, type the command followed by /?.

  Example: The Attrib command.

  In the command prompt, type attrib /?  Press on Enter.

  You will see the following results.

  

  This screen explains what the command Attrib and shows all the optional parameters that can be used and what each parameter is.

  Command-line reference:

  http://TechNet.Microsoft.com/en-us/library/cc754340.aspx

  Command prompt: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows/command-prompt-FAQ#1TC=Windows-7

  Concerning

• command prompt does not work well. He is unable to run the commands like 'help, tree, ipconfig, netstat', n many more

  the command prompt in my system has attracted some problem. A few months ago, it was all fine. BT now its disturbing. do not run the commands of other than "exit".

  even in the bar of tasks run these commands will not be executed.

  Type has the VALUE

  Copy the output and post with your response.