Comment to install boot camp on my mac?

Similar Questions

• Is it possible to install Boot Camp and use window only with an external hard drive, so it doesn't take much space on my Mac?

  Is it possible to install Boot Camp and use window only with an external hard drive, so it doesn't take much space on my Mac?

  No. Windows cannot be installed on an external drive, or start from a.

• Can I install Boot Camp/Windows 7 completely on an external drive?

  My MBP has an inside 128 GB SSD, and insists on the creation of a 50 GB partition on it in order to install Boot Camp Boot Camp.  This would force me to erase most of what I have installed.

  Is it possible to force the Boot Camp Assistant to install on an external USB3 Western Digital 1 TB Passport drive I have?

  Thank you!

  N ° Microsoft does not allow for Windows must be installed on external drives, which is the reason why Boot Camp requires you to create a partition for Windows on the SSD.

• Stuck Installing boot camp software support on Windows 10 for Mac Pro mid-2014

  Hello world.

  I have a mac pro mid-2014.

  I installed windows 7 using boot camp and all worked fine

  But my SSD has had some problems so I took it to the shop they replaced the SSD.

  SO now I have a blank disc. I restored time machine (I deleted the windows partition when I back up)

  now, I have just a single partition being original, I started to install Windows 10 by boot camp as usual. every thing works,

  created the USB (I used a disk portable 1 TB, I bought recently), downloaded software and then prompted me to make the partition.

  subsequently handed over running and starts the installation. window has installed fine and started, the boot camp installation window pops up and I click Next.

  now, he will be always stuck to the point trying to install realtek audio.

  no progress, no error report. I had to close the installation later, may not close properly due, try force end it.

  have tried mnay times, tried windows 10 business and education. they are all stuck at the same point

  I don't see how I was wrong.

  someone at - it had the same question or idea on how I can fix this?

  Thanks a lot in advance, really frustrating one simple thing I had tried two days after work. ;(

  Please see Bootcamp 6.0 driver install interrupted .

• How can I disable the Windows of Parallels key for use with Boot Camp instead (same Mac)?

  I have a Windows 7 key I used with Parallels (on my Mac). I was unable to uninstall Parallels, and now I want to use my key Windows with Boot Camp instead. How can I turn off the key to the prior use (same computer)? Is this possible?

  Unfortunately, I am not able to return to Parallels. (I upgraded my Mac o/s to an incompatible version with the version of Parallels, I had installed).

  Thanks for the suggestion, if!

  I'll try MS service the customer the morning... wish me luck!

  Just proceed to install Windows 7 in Boot Camp and reactivate by telephone by following the instructions.

• Impossible to install Boot Camp support software

  I have a MacBook Pro retina 13 end of 2013, running the Mavericks 10.9.1.

  I installed the latest version of VMWare Fusion (6.02), then install version 8.1 of Windows Pro 64-bit. And I installed VMWare tools in Windows.

  When I try to use the external Superdrive (USB) drive in windows, I get a message from VMWare saying I need to download Boot Camp support software to be able to use the Superdrive drive.

  I followed the instructions, first of the Boot Camp Assistant, then downloading the software from Apple support. When I try to install the Boot Camp support software in Windows, I get the following error:

  "This version of Boot Camp is not intended for this model of computer." I've attached a screenshot of the error.

  The version of the software support that Apple, I downloaded is 5.1.5640, which says it is the right version for my MacBook and the version of Windows.

  I'm not under Boot Camp itself. I want to just install the supported drivers, by what VMWare me.

  Is there a solution?

  Try to simply execute the file AppleODDInstaller64.exe to: Boot Camp > drivers > Apple

  From the AppleODD64.inf file, which I extracted the file above:

  

  FWIW, I've never had to install a driver for my SuperDrive drive in a normal file Virtual Machine based on, not to use Boot Camp, and I can't read/write CD/DVD without any problem when connecting to the host.  Normally if I just leave it plugged into the Mac and the customer can see the disc fine.

• When I go to install boot camp my mouse and keyboard is missing

  Hi, when I start Win10 installation using Boot Camp assistant after preparing the partition and start the installation of Win 10 the first configuration screen is coming, my magical keyboard and magic mouse 2 disappeared. I had no possibility to make comments like clicking or typing. No luck. What I am doing wrong?

  Thx for the support.

  Is this an iMac model 2015 or later?

• Install boot camp drivers not entirely

  At first I have problems with igdkmd64.sys, then I reboot to win and to reinstall the boot camp drivers. Probably all the drivers been installed except audio drivers. I have no audio output settings.

  I try to only install the audio drivers, but it has not been installed.

  What version of Windows? Do you have any unknown devices in Device Manager?

• Used to install Boot Camp 6

  Hello! Because Setup installation of Boot Camp 6 would hang on to Realtek Audio, I thought that my problem could be solved by this: Re: boot camp installation hangs at realtek audio stepSearch or ask a question. I followed the answer to Apple-recommended, but then the configuration would result in this:

  

  Note that notification of weird error with no words. After I pressed the OK button, this will be shown:

  

  It is said that Boot Camp has been installed successfully. But even after reboot, it seems that I have no Boot Camp in my Program Files folder. I tried to redo the installation process, and I continue to meet on this issue.

  For this reason, I begin to doubt my understanding of the answer to Apple-recommended. Please check these specific steps that I do to fix the Realtek Audio:

  1. start the installation of Boot Camp - everything seems normal until he begins installation of Realtek Audio and crashes it.

  2. run installation of Realtek Audio (file called RealtekSetup) - when he asks if I want to restart my computer now, no, I chose "restart my PC later" then I press 'Finish' to close RealtekSetup.

  3 open the Task Manager to close the Boot Camp installer - after manual installation of Realtek Audio, installation of Boot Camp is still stuck so I close with the Manager tasks.

  4 restart the Boot Camp Installer.

  Later, I meet the weird error shown in the photos above. I did steps 1 and 2 except that I closed RealtekSetup by using the Task Manager (where RealtekSetup was called Setup.exe (32 bit)) but Boot Camp, the installer is still blocked eventually. Right now, I don't know what to do so I need to post my situation here. I hope you guys can help me. Thank you!

  Hello Hello I actually fixed me already haha. I just removed my drivers RealTek, and then everything went well. I now control panel of Boot Camp lol

• Install Boot Camp with windows 8.1 already on iMac

  I had windows 8,1 of 10 Parallels and somewhere he stopped. instead of going through the same hassle that I got with parallels and not wanting to spend 50 another... I removed Parallels but still 8.1 of windows on the drive.  How can I use this file with Boot Camp?

  To specify the computer is correct-10 Parallels disappeared and I've updated to El Capitan. not resolved

• Installed boot camp at halfway and do not appear in disk utility. But it takes place in the hard drive.

  I am really frustrated and tried to solve the problems of this days no result. Would be very grateful for advice please!

  So I went before partition my MacBook Air using boot camp. It only allowed me to partition of 22 gb because of space constraints. While he was the partitioning, I forced to leave bootcamp as I changed my mind and I wanted to clear more space before partitioning. However, my watch storage now that 22 GB is used up (probably the bootcamp partition). However because I left bootcamp while partitioning, I couldn't find bootcamp on my disk utility partition. How can I delete the bootcamp hidden partition? It takes too much space on my hard drive. Help, please! Thank you very much!

  Same thing here!

  Can someone help us please?

• Windows xp is installed using boot camp on a Mac platform, problems when entering in the keys.

  Hello

  I write on behalf of the customer that has problems by typing the keys using Windows XP is installed on a Mac platform using bootcamp.
  The customer typed letters, but the result is the number buttons. For example: "' d l5k3 you French fries."

  Help, please.

  Thank you

  Hello

  Follow these steps and check if that helps.

  Step 1:

  I suggest to use the keyboard of the screen and check if you are facing a similar question.

  http://Windows.Microsoft.com/en-us/Windows-XP/Help/on-screen-keyboard

   

  Step 2:

  I suggest you try to uninstall and reinstall the keyboard software and check if this may help

  http://support.Microsoft.com/kb/307970

  I also suggest to post your query at Apple support for assistance.

  http://www.Apple.com/support/Bootcamp/

• Display extended when using Boot Camp

  Hello

  I need MS Access for some time and will (need to but don't want to) install Boot Camp on my Mac Book Air from mid-2012.

  Because it's only a 13 "screen on my Air, I'm hoping to connect it to the screen on my iMac 27" end of 2013 with a Thunderbolt cable.

  This will still work when I run Windows, please?

  Thank you.

  Yes it will support multiple display in windows

  But if you don't have access while you can with just install windows on a machine virtual it's easier and you don't have to worry about drivers and getting data to and from osx to windows and switching between them is instant

  the only 2 reasons you need bootcamp is

  1. If you don't have much memory because when the virtual machine is running it and osx share memory between them.

  2 If you need to run the fancy or 3d modeling 3d games as a virtual machine is not video card drivers using it does not activate the video cards to use 3d features.

  If you want to know more http://www.macworld.co.uk/how-to/mac-software/run-windows-10-on-your-mac-using-v irtualbox-3621650 /

• 'Boot Camp 6' will not install the drivers of "Key board" on windows 10!

  Hello

  Yesterday I received my installation "Windows 10" doesn't work anymore, when I tried to boot into windows, a BSOD.

  It's the error: "(KeyMagic.sys) System_Thread_Exception_Not_Handled.

  I tried several solutions, but none of them helped.

  I removed my boot camp partition and to install windows again and this time it's the same thing when I was installing boot camp drivers after a successful News '10 Windows' installation!

  After reboot I reinstalled successfully boot camp drivers, but the function of the keyboard keys does not work, in fact it completely does not recognize the keyboard!

  What can I do to solve this problem of blue screen of death?

  Finally, I was able to get my problem is solved as follows:

  1. I removed my existing Windows Partition

  2. I installed all the updates that are recommended for my 'Mac OS X' of 'Mac App Store'

  3. I created "Support of Windows Setup" again, using "Boot Camp Assistant".

  4. first of all, I checked the first 2 options to create 'Windows Installer' and 'Download Support Windows software' and then after that it's over, I did it again "Boot Camp Assistant" and I chose only 3rd option to create a partition and install windows

  5. Once successfully installed Windows, I installed "Boot Camp" without any problems and everything works fine!

• Installation of Windows 7 in Boot Camp on 5K new Retina Display Mac computer

  I am installing Windows 7 in Boot Camp on a Mac new 5 K in Retina display. I can't do it in front of the window that is captioned, ' where do you want to install Windows? When I select a partition for the installation I get this message: "Setup was unable to create a new partition system or locate an existing partition in the system." What should I do next? Is there an incompatibility known between Windows 7 and the new Mac desktop?

  Please note that the 5K iMac only supports 64 bit versions of Windows 7 and Windows 8.1:

  So make sure that you run this architecture:

  https://support.Apple.com/en-us/HT204048