Data storage 3.5 "Toshiba Canvio problem with permanent fade.

Similar Questions

• Toshiba 22L1334G problems with HDMI

  First of all, thanks to all for trying to help me :)

  Now let's make the problem: I bought this TV yesterday and I immediately connected on my PC (video card AMD R9 270 X) with an HDMI cable (the cable is Rev. 1.4 and less then 1,5 m).

  The global definition is very good, but I have in fact 2 problems:
  first of all, the colors are very saturated and can't do their natural even if the video card values.

  Second, the text with fonts bit if it's not black is very blurry pixeled, very difficoult to read.

  O Google searching I found similar problems for many people, but they have solved the problems, simply assign the HDMI PC input.

  Unfortunately, they used Samsung or LG screens and there in my Toshiba is not the parameter to indicate the HDMI signal PC.

  What can I do to use this device as a monitor in the right direction?

  Hello

  First of all I must say that this device isn t 22L1334G Toshiba PC monitor but it s a TV that can be connected to the computer via the available RGB (VGA) port.

  Thus, in case you want to connect a computer to this TV and want to use it as an external monitor, you should use the VGA port available

  I must say that I had the same problems in the past with blurry fonts using the HDMI port.
  I connected a device combined monitor/TV and connected my laptop to an external monitor s HDMI port.

  Blurry fonts were really a pain using office applications, but I found a solution; my device supported an additional DVI port and I was able to connect my laptop to monitor cable HDMI-DVI.

  My other monitor takes care of one other manufacturer supports additional parameters to change the sharpness of police so I can use the HDMI port.

• Toshiba RL938 - problems with Player multimedia network

  Hello, I just purchased a WD My Cloud and encountered the following problem: my TV Toshiba RL938 SMART recognizes the device, but network media player can not play videos, it begins decoding and says 'media player error. If I connect via USB, the usb media player plays all types of videos without any problem.
  Please tell us how to solve this problem. Thanks in advance.

  Posted by dmonika
  

  Hello, I just purchased a WD My Cloud and encountered the following problem: my TV Toshiba RL938 SMART recognizes the device, but network media player can not play videos, it begins decoding and says 'media player error. If I connect via USB, the usb media player plays all types of videos without any problem.
  Please tell us how to solve this problem. Thanks in advance.

  The user manual contains a list of the file types supported by the reading of network based on the DLNA specification. Please make sure, that the file types that you want to playback are mentioned in this list, otherwise it won't work.
  Also, please note that USB playback generally supports a variety of file types, for technical reasons. This has nothing to do with the brand or model, but is caused by technical limitations of the DLNA standard.

• Toshiba 46WL768 - problem with the HDMI connection

  Hello, my problem is the following:
  I have a Toshiba Regza TV 46WL768.
  I bought a Qviart Unic satellite receiver and when I connect to HDMI does not recognize.

  I tried another TV with HDMI decoder and works perfectly.

  I tried different HDMI toshiba configurations and does not.

  Connect another device via HDMI to the TV toshiba and if it works.
  I hope you can help me. Thanks in advance.

  If I understand you just all your TV's HDMI ports are working properly, no?
  In this case, you must contact Qviart Unic support and ask what may be the problem.

• Problem with Spry Fade in effect

  Hello

  I currently have problems fading in an image with a toggle. The problem is basically that the image I want to fade in and out onclick already appears onload. If I click on the image it fades in properly but I don't want the image to appear already onload. I messed around with the opacity to 0 setting, but it seems to keep the opacity to 0 all the time.

  Can anyone help?

  Thank you

  Try to give the image a class name (hideInitially) and affecting the visibility hidden as in

  {.hideInitially}

  visibility: hidden;

  }

• Problems with cross fade Transition

  Organization of CS4. Sometimes when I use a dissolve to a video black to my video action and it will restore then I get this problem.

  Can someone explain this and y at - it a work-around. It also happens with a black cover.

  I suspect it's the associated hardware.

  Here is a screenshot of what it looks like on the monitor.

  THX before any assistance that is given to me.

  Phil

  It only flashes on for just an about 100th of a second.

  Hello

  Since you are not really familiar with your general hardware stuff... in the meantime, while you look at this info more... maybe you can try to use your own keyframes in your panel of 'effect' (opacity)...

  make your black video, overlap your avi file... use manual keyframes for opacity to fade to black and wither in avi... as shown in the picture... ensure that keyframes match (on top of the other in two clips) so the angle of the slope (bland) is equal both for a walk ' manual cross dissolve «...»»

  

  PS... also, if your black video and avi are on the SAME channel instead of stacked video, you'd probably get better results in the dissolution of the 'EFFECT' crossing... Auto .the one you use now... because it seems to me that you are going through dissolve video black nothing of fundamentally... and there you have a few videos under him to finally get revealed.

• Firefox 5 is originally my Intel graphics driver (this is updated) crash - never had a problem with Firefox 2, 3 or 4.

  After repeating intel graphics accelerator driver crashes - the screen goes black and it retrieves - get the small screen of error as it happened. Frequently. I did scans of driver and everything is up-to-date. Did not have this problem with firefox 4

  You can simply turn off graphics acceleration temporarily until it's settled.

  Orange Firefox button or menu Tools > Options > advanced > "Général" mini-onglet of > uncheck use hardware acceleration when available

• Problem with connecting to the DB

  Hello world
  
  I try to configure DB Oracle 11g network for duplication of the DB and respectively for DATA GUARD and I face the problem with the network of the DB. I can't realize the basic problem. The problem is that after I connect to the DB with the name of the network service, I can't do anything. I get ORA-01034: ORACLE is not available
  Please help me solve this problem. I already do several times in 11.2.0.3.0 without any problem. :(
  
  Oracle DB 11.2.0.1.0
  OEL OS 5.7
  
  env

  [oracle@occ ~]$ echo $ORACLE_SID
  ROCKS
  [oracle@occ ~]$ echo $ORACLE_UNQNAME
  ROCKSU
  [oracle@occ ~]$

  init file
  

  [oracle@occ dbs]# cat /u01/app/oracle/product/11.2.0/db_1/dbs/ROCK.ora
  DB_NAME='ROCKS'

  startup mode

  SQL> startup nomount pfile='/u01/app/oracle/product/11.2.0/db_1/dbs/ROCK.ora'

  Listener.ora

  [oracle@occ ~]$ cat /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
  
  SID_LIST_LISTENER =
    (SID_LIST =
      (SID_DESC =
        (GLOBAL_DBNAME = ROCKS.oracle.cloud)
        (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
        (SID_NAME = ROCKS)
      )
    )
  
  LISTENER =
    (DESCRIPTION_LIST =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
        (ADDRESS = (PROTOCOL = TCP)(HOST = occ.oracle.cloud)(PORT = 1521))
      )
    )

  tnsnames.ora

  [oracle@occ ~]$ cat /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
  
  ROCKS =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = occ.oracle.cloud)(PORT = 1521))
    (CONNECT_DATA =
       (SERVER = DEDICATED)
       (SERVICE_NAME = ROCKS.oracle.cloud)
       )
    )

  lsnrctl status

  [oracle@occ ~]$ lsnrctl status
  ................
  Service "ROCKS" has 1 instance(s).
    Instance "ROCKS", status BLOCKED, has 1 handler(s) for this service...
  Service "ROCKS.oracle.cloud" has 1 instance(s).
    Instance "ROCKS", status UNKNOWN, has 1 handler(s) for this service...
  The command completed successfully
  [oracle@occ ~]$

  Local connection

  [oracle@occ ~]$ sqlplus / as sysdba
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  SQL> select status from v$instance;
  
  STATUS
  ------------
  STARTED
  
  SQL>

  Connection with the service name

  [oracle@occ ~]$ sqlplus  sys/engine@ROCKS as sysdba
  
  SQL*Plus: Release 11.2.0.1.0 Production on Sat Apr 28 18:53:06 2012
  
  Copyright (c) 1982, 2009, Oracle.  All rights reserved.
  
  Connected to an idle instance.
  
  SQL> select status from v$instance;
  select status from v$instance
  *
  ERROR at line 1:
  ORA-01034: ORACLE not available
  Process ID: 0
  Session ID: 0 Serial number: 0
  SQL>

  . / Thank you

  __OUTSIDER___ wrote:
  Can you please suggest me something on?

  RMAN-05535: WARNING: all the log files have not been defined properly.

  bcm@bcm-laptop:~$ oerr rman 5535
  5535, 3, "WARNING: All redo log files were not defined properly."
  // *Cause: It was not possible to define all the redo log files.  This
  //         can occur when LOG_FILE_NAME_CONVERT initialization parameter is
  //         defined but fails to match all the names or causes names to be
  //         created that are not in valid directories.
  // *Action: Query the V$LOGFILE view to see what redo log files are defined
  //          after DUPLICATE has completed.  Use the
  //          ALTER DATABASE RENAME FILE SQL command to correctly
  //          name the existing redo log files.
  bcm@bcm-laptop:~$ 
  

• Problems with 'background' JFrame focus when adding a modal JDialog

  Hi all
  I am trying to add a modal JDialog to my JFrame (to use for the data entry), even if I have problems with the JFrame "focus". Basically, at the moment my program starts the JFrame and JDialog (loading program) very well. But then - if I move to another program (say, my browser) and then I try to go back to my program, it only shows the JDialog and the main JFrame is nowhere to be seen.
  
  In many ways the functionality I'm looking for is that of notebook: when you open the Find/Replace box (even though it is not modal), you can switch to another program, and then when you switch again Notepad the two main frame and "JDialog" - esque box is always on display.
  
  I tried to make it work for a couple of hours, but can't seem to. The closest I got is to add a WindowFocusListener for my JDialog and I hide it via setVisible once triggered windowLostFocus() (then my plan was to implement a feature similar in my class JFrame--though with windowGainedFocus - to redisplay the JDialog, i.e. once the user switches to the program). Unfortunately, this doesn't seem to work; I can't seem to get any window or window focus listeners actually pull all methods, in fact?
  
  I hope that this kind of sense lol. In short, I'm looking for the Notepad CTRL + R-esque functionality, but with a modal box. With regard to a 'short ': code list
  
  Main.Java
  

  // Not all of these required for the code excerpt of course.
  import java.awt.BorderLayout;
  import java.awt.Color;
  import java.awt.Component;
  import java.awt.Dimension;
  import java.awt.GraphicsEnvironment;
  import java.awt.Rectangle;
  import java.awt.event.ActionEvent;
  import java.awt.event.ActionListener;
  import java.awt.event.ComponentAdapter;
  import java.awt.event.ComponentEvent;
  import java.awt.event.FocusEvent;
  import java.awt.event.FocusListener;
  import java.awt.event.WindowAdapter;
  import java.awt.event.WindowEvent;
  import java.awt.event.WindowFocusListener;
  import java.awt.event.WindowListener;
  import java.beans.PropertyChangeEvent;
  import java.beans.PropertyChangeListener;
  import javax.swing.JButton;
  import javax.swing.JFrame;
  import javax.swing.JPanel;
  import javax.swing.JSplitPane;
  import javax.swing.UIManager;
  import javax.swing.plaf.basic.BasicSplitPaneDivider;
  import javax.swing.plaf.basic.BasicSplitPaneUI;
  
  public class Main extends JFrame implements ActionListener, WindowFocusListener, WindowListener, FocusListener {
  
       static JFrame frame;
       private static int programWidth;
       private static int programHeight;
       private static int minimumProgramWidth = 700;
       private static int minimumProgramHeight = 550;
       public static SetupProject setupProjectDialog;
  
  
       public Main() {
  
            // Setup the overall GUI of the program
            // ...
            
       }
  
       private static void createSetupProjectDialog() {
            // Now open the 'Setup Your Project' dialog box
            // !!! Naturally this wouldn't auto-open on load if the user has already created a project
            setupProjectDialog = new SetupProject( frame, "Create Your Website Project", true );
  
            // Okay, for this we want it to be (say) 70% of the progamWidth/height, OR *slightly* (-25px) smaller than the minimum size of 700/550
            // Change (base on programWidth/Height) then setLocation
            int currProgramWidth = getProgramWidth();
            int currProgramHeight = getProgramHeight();
            int possibleWidth = (int) (currProgramWidth * 0.7);
            int possibleHeight = (int) (currProgramHeight * 0.7);
  
            // Set the size and location of the JDialog as needed
            if( (possibleWidth > (minimumProgramWidth-25)) && (possibleHeight > (minimumProgramHeight-25)) ) {
                 setupProjectDialog.setPreferredSize( new Dimension(possibleWidth,possibleHeight) );
                 setupProjectDialog.setLocation( ((currProgramWidth/2)-(possibleWidth/2)), ((currProgramHeight/2)-(possibleHeight/2)) );
            }
  
             else {
                 setupProjectDialog.setPreferredSize( new Dimension( (minimumProgramWidth-25), (minimumProgramHeight-25)) );
                 setupProjectDialog.setLocation( ((currProgramWidth/2)-((minimumProgramWidth-25)/2)), ((currProgramHeight/2)-((minimumProgramHeight-25)/2)) );
             }          
            
            setupProjectDialog.setResizable(false);
            setupProjectDialog.toFront();
            
            setupProjectDialog.pack();
            setupProjectDialog.setVisible(true);
  
       }
  
  
       public static void main ( String[] args ) {
            Main frame = new Main();
            frame.pack();
            frame.setVisible(true);
            
            createSetupProjectDialog();
       }
  
          // None of these get fired when the Jframe is switched to. I also tried a ComponentListener, but had no joy there either.
       public void windowGainedFocus(WindowEvent e) {
            System.out.println("Gained");
            setupProjectDialog.setVisible(true);
       }
  
       public void windowLostFocus(WindowEvent e) {
            System.out.println("GainedLost");
       }
  
       public void windowOpened(WindowEvent e) {
            System.out.println("YAY1!");
       }
  
       public void windowClosing(WindowEvent e) {
            System.out.println("YAY2!");
       }
  
       public void windowClosed(WindowEvent e) {
            System.out.println("YAY3!");
       }
  
       public void windowIconified(WindowEvent e) {
            System.out.println("YAY4!");
       }
  
       public void windowDeiconified(WindowEvent e) {
            System.out.println("YAY5!");
       }
  
       public void windowActivated(WindowEvent e) {
            System.out.println("YAY6!");
       }
  
       public void windowDeactivated(WindowEvent e) {
            System.out.println("YAY7!");
       }
  
       public void focusGained(FocusEvent e) {
            System.out.println("YAY8!");
       }
  
       public void focusLost(FocusEvent e) {
            System.out.println("YAY9!");
       }
  }

  SetupProject.java
  

  import java.awt.event.ActionEvent;
  import java.awt.event.ActionListener;
  import java.awt.event.WindowEvent;
  import java.awt.event.WindowFocusListener;
  import java.awt.event.WindowListener;
  import java.io.IOException;
  import java.net.URL;
  import javax.imageio.ImageIO;
  import javax.swing.JDialog;
  import javax.swing.JFrame;
  import javax.swing.JLabel;
  
  public class SetupProject extends JDialog implements ActionListener {
  
       public SetupProject( final JFrame frame, String title, boolean modal ) {
            // Setup the JDialog
            super( frame, title, modal );
            setDefaultCloseOperation( JDialog.DISPOSE_ON_CLOSE );
  
            // Bad code. Is only temporary
            add( new JLabel("This is a test.") );
  
            // !!! TESTING
            addWindowFocusListener( new WindowFocusListener() {
  
                 public void windowGainedFocus(WindowEvent e) {
                      // Naturally this now doesn't get called after the setVisible(false) call below
                 }
  
                 public void windowLostFocus(WindowEvent e) {
                      System.out.println("Lost");
                      setVisible(false); // Doing this sort of thing since frame.someMethod() always fires a null pointer exception?!
                 }               
            });
  
       }
  
  }

  Any help would be very greatly appreciated.
  
  Thank you!
  Tristan

  Set the image as the owner of the dialog box when you create the dialog box:

  JFrame frame = new JFrame();
  ...
  frame.setVisible( true );
  
  JDialog dialog = new JDialog(frame);
  ...
  dialog.setVisible( true );
  

• problem with the storage of the data in the table

  Hello

  I'm having the problem on the storage of data in the table. My problem is that whenever he makes a loop, the table just keep replacing them rather save to the next index. At 0, the value is 123, and 1 is 234. But I saw that all the data capture all crush to 0 until the last data see the 0. How can I fix this problem?

  
  

• Problem with Mail storage on the iPhone 6.

  OK, I have a problem with my mail. That is, it uses 1.2 GB of data. I cleaned all my emails and deleted all the big files. Nothing has changed. So I deleted all e-mail accounts. Still no change. When I plug my phone in iTunes, it says there 2.49 GB free yet my phone says I only have 337 MB of free space. Yes, I tried to sync and see if that has nothing and he did not. No idea what continues?

  Try to reset your email account in this order.

  First close your Mail application completely from the window of the selector app by double clicking the Home button and drag the email preview pane up until it disappears from the display. Then go to settings > Mail, Contacts, calendar > find your e-mail provider and click on the account. On the next page, delete the account. Then perform a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Then go to settings > mail... and to add the account.

  iTunes and iPhone storage almost never fit. The amount of iTunes is an estimate, the phone is the exact amount.

  Different amounts of 'Available' reported by iPhone and iTunes

  If the above is not enough, you may need to do a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

• External Toshiba HDD problem. Something wrong with Windows I think.

  Toshiba ALU 3.5 "1.5 TB external HARD drive problem
  Hello!

  I'm having a problem with a new external HARD drive, I bought a couple of months.

  The HARD drive is recognized by Windows XP as a disk 3,5 '' HARD, but then he invites for drivers and never.
  They say drivers should be on the HARD drive itself, but my computer does not access the drive and never
  He attributes a letter or anything like that.

  The disc works on all the other computers I've tried with. My computer is since 2006, so maybe
  It is an age problem. I do not know.

  I drive came as FAT32 and I tried to format it in NTFS, but it does not work.

  I have completely updated the DELL drivers (bios, chipset, etc) and Microsoft (SP3/etc), then it cannot be a problem of drivers, it can?

  MORE DETAILS:

  Hey guys, it seems that the problem is more complicated. Here are two other discoveries that later, I did:

  I accidentally uninstalled a USB root hub, and all of my usb devices stopped working. I had to read on how to re - install, and most of the people, said that Windows should do it by itself. There can be no. So the next thing I did was uninstall all the USB controllers, on the assumption that Windows XP should reinstall automatically thereafter. Windows did not have this too!

  Although Windows has detected something, it does not recognize as a controller and have not installed the drivers for them. I had to manually tell Windows to look in C:/windows\system32\drivers and C:/Windows/c:\windows\servicepackfiles/i386 to each controller. It was tiring.

  I finally reinstalled all my usb controllers and my webcam works well again. But has not fixed the problem HARD drive.

  This is related somehow the problem of HARD drive, because I plugged my hard drive to a friend's computer and tried to put my computer on a USB key. Guess what, the USB is noticed by windows, but not recognized or installed in 'my computer '. The same story!

  I must tell you that in early December, I removed an old Go 700 Siemens drive of my system without "Safely uninstall" and it crashed HARD drive. Now, I realize that this accident probably missed my copy of windows, or my computer. I'm not sure of that... ?

  I believe that all these problems are related. It seems centered on the ability of Windows to detect large storage via USB devices. My webcam, for example, works very well.

  Well, I'm always working hard to solve this problem, but if you have any ideas, please let me know!

  All the best,
  M.

  It seems that you have already started the discussion on the same issue in another thread:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=198714

  Please don t create several threads on the same topic and follow the first thread to avoid misunderstandings!

• Some problems with Toshiba TV 47L 6453

  Hello

  I have some problems with this TV, as follows

  -I need to re tune the tv several times a day to receive a complete list of channels.
  -The guide shows a TNT channel with program information, when a program is selected, I get a message indicating that the channel can not be tuned. However when I touch the channel it displays the string correctly.
  -Program data is not displayed on several channels. Sometimes this can be improved in re-tuning.

  Can I have a TV that is defective, or is it considered normal for this toshiba tv. I have a lot running off the same ariel who doesn't have these problems of adjustment so I know that it's not that older television.

  Any help here then. Just to add insult the YouTube app decided to stop working. This TV keeps guessing you as to what will work on any given day.
  Without a doubt the worst little waste tech, I had the misfortune to buy for many years. It has a large image. Such a shame, he struggles to view freeview channels, or smart TV applications.
  I will never buy an another Toshiba product again. The previous 7 years tv, that I had to be upgraded is far superior to this piece of unreliable junk. Hope this helps someone to make a wise buying decision. Do not buy this TV and become another victim of toshiba.

• problem with storage space - iPhone 4 - 32 GB

  Hello, I have an iphone 4 32 gb. I'm having a problem with storage space. A few days ago, that even though I was taking 5 GB of empty space, a notification appeared that storage is almost full. I deleted about 2 GB of photos and videos. He showed me 2 GB of free space, but after 1 hour again the same notification appeared. As soon as I have emptied my space with about 1 to 2 GB by deleting photos or videos, it is completed with other data.

  How should I solve this problem?

  Thank you.

  What is the exact wording of the message? Could he be referring to iCloud storage?

  Also have you withdrawn your recently delete pictures and videos? Deleted ones is 'saved' for 30 days or more unless you intentionally delete/remove

  Why my iOS device I have more pictures that I can find?

• Problem with Toshiba authorized service providers

  I have a laptop Toshiba Satellite A300-17.

  Recently, I had the following problem: while the laptop was running normally, whenever I opened it I got a black screen (Please note that the output sound was normal). When I connected the laptop to an external monitor (VGA), I myself went to be normal for her and so I was able to work without any other problems.
  After a while, I decided to get the laptop for service providers authorized by Toshiba in Greece.

  They told me that the problem was the motherboard, that sounded really strange because I had no problem with starting. When I went to get the laptop on their part, I discovered that the computer cannot start.

  So I asked why this is happening and why it worked before and it doesn't work now.
  Their response was that my motherboard was "die slowly" and that they did not open the laptop to check what was wrong with her, but only an online diagnostic test.

  Of all the foregoing, I believe they have done something to my laptop and caused the problem with the motherboard. I tried to contact Toshiba Europe and inform them about the behavior of their authorized service providers by sending an e-mail in Germany ([email protected]), in the hope that they would do something in this regard. Unfortunately, I had no answer.

  Please note that I am a PhD student and my laptop is necessary for my research activity. All this delay has a major impact on my work.

  Who do I contact in order to bypass this?
  Is there anyone in the treatment of cases like that of Toshiba?
  Is it possible that a company like Toshiba just don't care about their customer satisfaction?

  How long should I wait before this problem is solved?

  Hello

  It of really hard to tell how much of the material could be faulty, but if the laptop does not start, then a serious problem of material is possible.
  You said that the internal screen was dark, but you could work with an external monitor attached to the laptop.

  > When I connected the laptop to an external monitor (VGA), I myself went to be normal for her and so I was able to work without any other problems

  Well, that means the motherboard and graphics card might be ok and that the internal display will be affected.
  However, only a technician of the laptop could provide more details, after the material has been checked, so I would say you should get in touch with the guys once more in order to get the extract.

  I found these contact data for the Greece page ASP from Toshiba:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

  + Ideal Electronics S.A. +
  + www.toshiba-computer.gr+
  [email protected]+
  + P: + 30 2105 193 900 +.
  + F: + 30 2105 193 921 +.

  Good luck