Comments Script Manager - cannot set Windows IP

Similar Questions

• Error: The installer cannot set Windows XP required configuration information during the upgrade to Windows XP Home SP3 of Windows XP Pro.

  Original title: OEM Windows XP Home SP3 update XP Pro

  Here is a compilation of the messages from another forum regarding
  My problem:
  ---------------------------------------------------------------

  I'm trying to upgrade a Windows XP Home Sp3 OEM system to
  Windows XP Pro. (There are a few Pro features
  that are not available in the House I now need: (1) the files offline and
  (2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
  I don't want a clean install, but an upgrade. I bought a Windows XP Pro
  Upgrade CD on Ebay that was Windows XP Pro
  Gold (v2002). I'm sure that's true for the following reasons:

  It has been listed as an upgrade, but the CD is not labeled "Upgrade".
  It seems very authentic with all Microsoft holography.
  He came in the standard package of Windows XP (without box),
  and it was sealed.
  The name of volume for the CD is WXPFPP_EN. The Internet,.
  It is the retail of Windows XP Pro RTM (gold)!

  Here are things I tried initially.

  (1) I tried to upgrade to Pro from the purchased CD. It is immediately
  has refused to upgrade indicating the upgrade OS (Pro) is older than the
  installed OS (home)...

  (2) I read about "slipstreaming". "Slipstreaming" allows to integrate
  a service pack with an earlier version of the operating system. I created a
  upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
  Autostreamer later, but it made no difference) from the purchased CD
  and a file containing SP3.

  After you burn the CD and start the upgrade
  (Windows installation), the upgrade process
  product through "information collection."
  "Dynamic update" and "Preparation of Installation" with
  no problems. My computer restarted and returned to
  "Installation preparation". A progress bar called 'Progress '.
  quickly filled to about 90% and the hanging system
  at that time there for about 15 minutes.
  Then, I got the following error message:

  Setup cannot set the required Windows XP configuration
  information. This indicates an internal Setup error.

  This is where I am stuck. I had to leave the installation at this point.
  My drive is starts raining and I had to restore a backup.

  (3) just for the heck of it, I formatted my hard drive and
  reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
  I immediately used my XP CD slipstreamed Pro to try one
  upgrade to XP Pro and IT WORKED! I need to find out why the
  properly clean XP Home OS upgraded to XP Pro but my pre-existing
  (with the files users, drivers, etc..) XP Home OS does not level
  successfully to XP Pro.
  -------------------------------------------------------------

  Another post:

  Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
  I continue with installation of all the essential and the add-on
  pilots (essentially all my original version). Then, I
  set up a network connection and firewall. With this configuration,.
  I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
  success (even if the upgrade not configured my graphics
  card properly). I guess my current problem is either the registry,
  the WINDOWS, some user file or parameter file.
  ---------------------------------------------------------------

  Another post:

  I made a file and the backup of the folder C:\Windows folder
  on my system that is pre-existing (OEM XP Home Sp3). I also did a
  separate the backup the State of the 'system' on my pre-existing system.
  These are added my full image backup of her pre-existing
  system a month ago.

  I did a backup image of my system (minimum fees OEM XP Home
  SP3 with all the original installed drivers over a network configured
  connection and a firewall configured). This system will upgrade
  XP Pro with XP Pro SP3 slipstreamed CD successfully.

  Experiment 1:

  I've restored my minimum system. I then restored the C:/Windows folder
  and the State of the pre-existing system backup system. A startup
  has managed (with a minor irritant). I had to activate Windows.
  Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
  at the same place during the upgrade and gave the same error as before:

  Setup cannot set the required configuration information Windows XP.
  This indicates an internal Setup error.

  Experiment 2:

  I've restored my minimum system. I then restored the system state only
  the backup of the pre-existing system. After startup I was asked to
  activate Windows, but answer Yes to the question would be to disconnect me
  the system. I couldn't get connected to try the XP Pro upgrade.

  Experience 3:

  I've restored my minimum system. I then restored only the C:/Windows
  the backup of the pre-existing system folder. Once again, as in experiment 1,
  the upgrade failed at the same place with the same error message.

  ----------------------------------------------------------------

  Before the experiment 3, I hoped that 3 experience would succeed so I
  could conclude that I had a registry problem. I'm not sure now.
  I don't know what to try next. Take the minimum system and reinstalling
  my files of the user is not an option that my hard drive has over 200 GB of
  programs! If I restore all files and folders of my pre-existing
  I would still have backup to restore a system state the reliable (read the registry).
  ---------------------------------------------------------------------

  Sorry for the length! If anyone has any ideas I would appreciate your responses.

  Thank you

  Hello

  This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.

  For more information, see this link:

  Error message: Setup cannot set the required Windows XP Configuration information

  Hope the helps of information.

• error - bunch of comments script manager - vRO 6 during execution of the script

  Hello

  Lately, I've been making a mistake during a running script in a guest. Linux as well as Windows servers is affected.

  I use the package to change the password root\admin as a day 2 after commissioning a system with vRA. The script simply runs 'passwd root' or 'net user administrator [paqssword]' on the new server.

  The error is on Linux:

  "A general error has occurred: the url generation failure (Workflow: copy of the file of comments to the vCO / Scriptable task (item1) #9).

  

  the vCenter report to event log "comments authentication operation failed to create the temporary directory for operating on a virtual machine [vmname] '.

  The nested workflow that throws the error is 'Copy of the file of comments to the vCO' workflow, the line of code that indicates the error is:

  var ftInfo = fileManager.initiateFileTransferFromGuest (vm, guestAuth, guestFilePath);

  The value of guestFilePath is imported from the attribute scriptOutputFile = / tmp/vmware-root/vmware160/vco_vmware185

  Under Windows:

  A general error occurred: could not generate URLS (workflow: copy file of vCO for host / Scriptable task (item1) #11)

  

  This time, the "file copy of vCO in the comments.

  var uri = fileManager.initiateFileTransferToGuest (vm, guestAuth, guestFilePath, attr, srcFile.length, overwrite);

  The value of guestFilePath comes from cmdAnsiGuestPath = C:\Users\[username]\AppData\Local\Temp\vmware20\cmdANSI.exe

  Is could someone please help me solve this?

  After checking the js - io - rights.conf still (permissions properly), under the chmod + x o vRO temp folder and restart the device, the workflow now works on all hosts.

  Why he has managed to work on the only two hosts in the past, I did not find.

• Windows boot manager / cannot start windows

  I currently have windows vista and at startup, I get the following message. Windows could not start. He recommended I insert the installation disc and restart my computer, but my computer (gateway) came with vista installed.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  Read the above about gateway Recovery Options.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot set Windows Explorer to use Acrobat to open PDFs

  I have CS4 x 64 Windows. Because Acrobat 9 crashed at least every 10 minutes and it has downgraded features (for example, you can no longer replace a page in the page window by dragging a page from another document and the applicant on the page number), I reinstalled 8. The only problem was that I had to start 8 before double-clicking in Windows Explorer to open a pdf file, if not 9 to start Windows. So, to take care of this, I uninstalled 9, but then disappeared the pdf printer. So, I did a repair of 8 installation. Now explore will NEVER open a pdf file. When I open with, or when you try to set the open with option of files / File Types, I select the version 8 of acrobat.exe, but just explore ignors the selection, as if I had simply cancelled out to... window. 8 works fine when I drag a file from the Explorer and drop it in Acrobat. I don't know there's a difficulty lurking somewhere thanks in advance and help!

  I suggest to uninstall Acrobat 8 and then reinstall Acrobat 8.  I hope that it would create your file associations correctly.  Good luck!

• x 34 predator - cannot set windows 10 to 100 hz?

  Hello!

  Just got my X 34.  During the execution of the games in full screen, I am able to use the overclock of 100 Hz.

  HOWEVER, as most of the other players, I like to run in full screen mode so I did not tab out / minimize the game whenever I want to do something outside of the game.

  When running in full-screen mode my monitor reports that its operation at 60 Hz.

  When I go into the NVIDIA Control Panel > Reso.ution change and try to change the default value to 100 Hz to 60 Hz, nothing happens when I hit apply.  No matter what I do, I can't get this parameter in order to be actually set at 100 hz.  It comes down to 60 Hz.

  

  Solved!

  Click with the right button on bottom > display settings > Advanced display settings > select the x 34 > view the adapter properties > Monitor tab > change to 100 hz

• Cannot set Windows 7 share contingent.

  I have a ReadyNAS DUO with 2 TB drives RAID5 and Frontview shows 49% used. But in Windows Explorer in Windows 7, it shows only 781GB total size on each backup and media and these are the only two 12.5 GB free.

  I checked Quota tab in the properties of each mapped drive, but the Show Quota Settings does nothing. I don't put anything into action in Frontview.

  How can I use the rest of the storage?  How do share the Quota of work settings?

  Thanks Jim

  Hi Jim,
   
  Thanks for posting your question in the community of Microsoft Windows.
   
  According to the description of the problem, it seems that you are facing problems affecting Windows 7 share of quota and would better fit the question you posted on TechNet forum.
   
  I suggest you to post the question on the link below:
   
  Windows 7 networking:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
   
  I hope that the information above helps you.
   
  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

  could not access vb run time for custom action script

  I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

  Hello

  I suggest you run the fixit and see if it helps:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  It will be useful.

• ADFC-10004: cannot set property managed bean "autoquery.

  Hello
  
  I'm trying to deploy and run an ADJ application that was built with JHeadstart. Initially, I came across the question which the application appears to hang in the browser when I first tried to see. The URL change the request parameter and a reload triggered JavaScript happens constantly - page content is empty. I could solve this problem by using the suggestion offered in this thread:
  
  Re: JDeveloper 11.1.1.2 group patch
  
  After the page is loaded (Yes!), but when I tried to load the next page making connections to database tables, I get this stacktrace and the page remains empty:
  
  Caused by: oracle.adf.controller.ControllerException: ADFC-10004: cannot set property managed bean "autoquery.
  at oracle.adfinternal.controller.util.Utils.createAndLogFacesException(Utils.java:184)
  at oracle.adfinternal.controller.beans.ManagedBeanFactory.setSimpleProperty(ManagedBeanFactory.java:316)
  at oracle.adfinternal.controller.beans.ManagedBeanFactory.setManagedProperties(ManagedBeanFactory.java:262)
  at oracle.adfinternal.controller.beans.ManagedBeanFactory.newInstance(ManagedBeanFactory.java:203)
  at oracle.adfinternal.controller.beans.ManagedBeanFactory.instantiateBean(ManagedBeanFactory.java:860)
  at oracle.adfinternal.controller.state.ScopeMap.get(ScopeMap.java:82)
  at javax.el.MapELResolver.getValue(MapELResolver.java:164)
  at javax.el.CompositeELResolver.getValue(CompositeELResolver.java:143)
  at com.sun.faces.el.FacesCompositeELResolver.getValue(FacesCompositeELResolver.java:72)
  at com.sun.el.parser.AstValue.getValue(AstValue.java:118)
  at com.sun.el.parser.AstNot.getValue(AstNot.java:46)
  [snip]
  Caused by: java.lang.NoSuchMethodException: unknown property 'autoquery.
  at org.apache.commons.beanutils.PropertyUtilsBean.setSimpleProperty(PropertyUtilsBean.java:1741)
  at org.apache.commons.beanutils.PropertyUtils.setSimpleProperty(PropertyUtils.java:577)
  at oracle.adfinternal.controller.beans.ManagedBeanFactory.setSimpleProperty(ManagedBeanFactory.java:308)
  ... more than 232
  
  I checked in JDeveloper properties JHeadstart ask "Change the JHeadstart Application definition". Looking at my details group values, I see that the "automatic query" is checked in all cases. I tried to remove the check mark and redeployed, but the same error happens again.
  
  At the moment I don't know how to debug this more. The last error is possibly caused by the fix that I applied (removal of the filter to ADF faces)? Any ideas how to proceed are welcome. :)
  
  Environment:
  JDeveloper Studio Edition Version 11.1.1.2.0
  JHeadstart 11.1.1.2.37
  WebLogic 10.3.2.0, running locally on my Windows XP machine

  To start, can you still run the application within JDeveloper?
  Second, switch to a later version of JHeadstart recently?

  In the past, the JhsSearchBean used to have an autoquery property. If your managed bean definition still contains this property, you get the error you mentioned.
  You must remove this property of any beans that are controlled using the JhsSearchBean class.

  Steven Davelaar,
  Jheadstart team.

• Error - ' Manager of power strategy cannot set the regime... two revision levels are incompatible "when trying to save the scheme in power options.

  Original title: cannot set a power scheme in Power Options

  Cannot set a power scheme. When I try to save the scheme, "Manager power strategy impossible to define the... two revision levels are incompatible."

  How can I fix it?

  Hi BernieHopkins,

  1 have you properly previously defined the power scheme?

  2 have you made any hardware changes or software on the computer before this problem?

  3. What is the full error message that you receive?

  If you receive the same error as mentioned in this link, you can follow this link & check if the problem persists.

  Error message: Power Manager political unable to define a strategy. Indicates two revision levels are incompatible

  Hope the helps of information.
  Please post back and we do know.

• Windows Script Host - cannot find the file script 'C\Users\Shootea\AppData\Local\Microsoft\CDBurning\desktop.ini '.

  My laptop is upward lately since January 3, 2015 and a startup displays message - Windows Script Host cannot find script 'C:\Users\Shootea\AppData\Local\Microsoft\CDBurning\desktop.ini' file - I google a couple of information how do I get rid of it. I tried to open msconfig and then disabled under Startup in the Configuration of the system. 'Normal Start Up' is selected in the general tab slot. After I turn it off and restart my laptop the same pop-up message shows no more, but whenever I surf the net or you open an app, my phone now shuts down randomly. Is there something I did which could spoil? I appreciate any useful information to resolve this problem. Thanks a lot :) :) :)

  Hello

  As to what you were doing in msconfig to spoil anything, we don't know what you have disabled in msconfig.

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  See you soon.

• Windows script host cannot be reached on this computer

  Windows script host cannot be realized on this computer, for further details, contact the system administrator

  (I used google trnslate for massage, there might be some difference between this and the ouanoufi one), (I am the administrator)

  This thing pops up evry 2 mins and its relly scared me to please you relly please I really need a solution!

  Original title: windows script host

  Hi Quti,

  Thanks for posting your question on the Forums of community of Microsoft.

  I appreciate your efforts to explain the matter in English.

  1. You did it of any significant changes to the computer before this problem?
  2. What anti-virus program is installed in your system?

  Windows Script Host (WSH) enables scripts to be run directly in Windows by double-clicking a script file or by typing the name of a script file at the command prompt. Such as Microsoft Internet Explorer, WSH is a controller of ActiveX script engines and the scripts are written in Microsoft Visual Basic Script.

  So, this could be the visual basic script that loads the background that is causing the problem. By starting the computer in selective startup with only necessary Microsoft services in operation, we can refine the question of which program is the cause. This process is known as a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Trying to open my samsung cell phone program Kies 'cannot set owner property to a window that has not been demonstrated previuosly.

  Have used the Kies program to access samsung mobile and my PC today, I get this message when you try to connect to sync

  "Cannot set owner property to a window that has not been demonstrated previuosly"

  Hello

  1. have there been recent changes to the computer before the show?

  I suggest to uninstall and reinstall Kies program you and check if that helps.

  Hope this information is useful.

• He cannot get set Windows Update to download. Receive error code 80072EFE?

  Original title: Carol

  He cannot get set Windows Update to download. Receive error code 80072EFE.

  https://support.Microsoft.com/en-AU/KB/818018/en-AU how to troubleshoot problems connecting to Windows Update or Microsoft Update

  Do not trust article on the fixit.

• Cannot set a default for documents pdf Acrobat XI.  Wants to stay with Microsoft Edge.  16 Windows.

  Cannot set a default for documents pdf Acrobat XI?  Wants to stay with Microsoft Edge.  16 Windows.

  Hi tenleyvan,

  Could you please if you want to XI default Acrobat open pdf documents?

  Or do you want to open pdf in Microsoft Edge?

  Do XI Acrobat default to open the PDF, right-click on any pdf file > click Open with > choose another application > select Adobe Acrobat in the list > check "Always use this app to open .pdf files" > OK

  It goes the same for Microsoft Edge, select Microsoft Edge in the list instead of Adobe Acrobat.

  Let us know if you face any problem.

  Thank you! Shivam