Commercial work with student permit

Similar Questions

• The jury of ELVIS will work with LabVIEW Student Edition 2010

  Hello

  This question was asked in the forums of LabVIEW, but no solution has been found. I have a windows 7 x 64 machine with LabVIEW 2010 Student Edition. When I try to install ELVIS 3.0.5 traditional software I get the following (no error code) message: "this Setup program requires the LabVIEW 8.5 development system or later to be present on this computer. Development system LabVIEW Base in any version of LabVIEW is not supported. Please install LabVIEW and then rerun setup of NI ELVIS. »

  I also installed the DAQ software for PCI DAQ board. I do not have access to a 32 bit machine and do not know how to get my board work (no ELVIS II) ELVIS. I have provided a screen shot of the message during the installation of the software of ELVIS.

  .

  Hey dduong16,

  Thank you very much for taking the time to provide additional information. After talking with several experts about your system, we concluded that this error is the result of an incompatibility between 3.0.5 Elvis and LabVIEW 2010 64-bit. Even the latest drivers of Elvis are not yet supported by 64-bit LabVIEW: see notes in support of the operating system on the Readme Elvismx 4.2.3

  To solve your problem, you will need to uninstall the 64-bit version of LabVIEW and install a 32-bit version. If you are a student, you should be able to get this version of your computer (it will work fine with your Windows 7 64-bit OS - it will install on 32-bit OS emulated inherent in your system). If you are not a student, please send me a personal message, and we will be working with an account representative to get you the necessary version.

  I apologize for the inconvenience, this made you and appreciate your patience. We have updated the Elvis 3.0.5 Readme to reflect this incompatibility (the change may not appear yet, because it takes time to propagate through our system), and I'm trying to create a Base of knowledge on the subject article to help future users who encounter this error.

  If there is anything else that I can help you, please you after return. Thank you!

  ~ kgarrett

• I installed Photoshop CS6 extended (student version) on my Mac in May last year. It has worked perfectly until recently when the system tells me that the program is perhaps not able to work with OSX (I have OSX 10.9.5). I have now uninstalled the PS one a

  I installed Photoshop CS6 extended (student version) on my Mac in May last year. It has worked perfectly until recently when the system tells me that the program is perhaps not able to work with OSX (I have OSX 10.9.5). I have now uninstalled the PS application and you want to reload. I have the S/N codes and redemption. How should I proceed?

  Please visit to download applications download Creative Suite 6 .

  Kind regards

  Hervé Khare

• I can stil buy Dreamweaver CS6 with a student permit?

  I can stil buy Dreamweaver CS6 with a student permit?

  You can get it here: http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_education_sl _ creativesuite6.edu.html

  If the regular pricing initially ($399,00 USD), click on the link "student and teacher pricing ' at the bottom of the grey area on the right side of the screen.

  Once the correct price is shown, DWCS6 should be $149.00 USD for students/teachers qualification.

• I have a student permit a year creative cloud, but after update, I can't access the subscriptions for all apps

  I get error 130:11 when you try to open acrobat, and I can't open my apps because it says that I don't have a subscription.  On July 1, 2015, I bought my student permit that has been for a year.  I really need access to the CC for the work.

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• I have 2 Gmail accounts that I use Thunderbird to work with. Suddenly, one of the accounts has stopped working (password requests).

  For a year I used without problem Thunderbird to work with two of my Gmail accounts without problems.
  I had been on a long trip for the last 2 weeks had not begun to Thunderbird. When I did it for the first time this morning, I couldn't work or another account with it.

  Reset, return all settings solved the problem for ONE of my accounts (the main!), but the other continues to refuse to work.
  Yes, I have IMAP and less secure device permissions enabled in the Gmail settings. I changed my passwords and their update on all ends and again, my main account works, but the other refuses to accept passwords, even though I know they are correct.

  I still get the "cannot connect to server imap.gmail.com ." Message and I am prompted for my password.

  No luck.

  Could someone help me novel?

  Thank you very much,

  Zea

  After digging around a few others, I finally managed to find the google site:

  https://support.Google.com/accounts/answer/6009563

  There is a link on the bottom, saying: "allow access". Click on this one, 'continue' and directly there after prompt to synchronize Thunderbird. That solved the problem.

  Synchronize Thunderbird now until my two accounts again.

  Thanks for all the help and all the world looking in there, I hope this helps the other 3 who clicked on they have the same problem.

  PS: In your web browser, you must be connected to the Google account with disorders!

• How can I run two different versions of Firefox, the last does not work with a site important I need to use?

  With the latest version of Firefox, I can't ' fast email ' to my students through the ANGEL of the College System. I had to uninstall and go to an earlier version. I prefer the new rev.

  A way to run two different versions. It doesn't have to be simultaneously. Seems to be a problem on the Mac and my XP systems.

  Thank you
  Kim

  You can install the portable version of Firefox 3.6.x to access Web sites that don't work with Firefox 5 +.

  • http://PortableApps.com/apps/Internet/firefox_portable#legacy
  • http://PortableApps.com/apps/Internet/firefox_portable/localization#legacy36

• IWeb will work with OS 10.11?

  I tried to run my copy of iLife ' 08 iWeb (v. 2.0) to El Capitan on my Mac Pro and seem to have problems to use it from the beginning.  I suspect that it was designed for PowerPC and that it is not compatible with Intel.  Is this a known issue?

  Otherwise, I always have my 10.4.11 (Tiger) G4 running operating system and want to use iWeb to build a site on it.  I have looked around in the help of support here and see recommendations to spend more to update, the creators of commercially available (and expensive) sites, but other sources suggest iWeb is still used.  I built a site with it under Tiger, about 3 years ago, and it was fine (although now taken down).  Would like to know in advance, if possible if, after spending the time to build the site, I can actually put it online (my domain to my site Web Yolasite name change).  I am skilled enough with the Pages, I like working with iWeb for ease and similar flexibility.

  Thank you

  This is just a screenshot of what past when I open iWeb and chose the model of 'modern' framework - which is not at all what I expected (and I also had problems to enter content in the text boxes, problem with the color, which was negative, and that's all, when I leave!)

  

  iWeb 08 certainly do not work and yes that is why you have problems with it.  At least, most of the people updated their iWeb to use iWeb 09, which is version 3, however, you may be out of luck if you want to buy is not been sold or supported by Apple for the last 4 years or more and has not been updated for 6 years.

  The only way you can get iWed 09 is to look on Amazon and see if they have the old iLife 11 or iLife 09 converted (boxed) sets for sale that both contain iWed 09, however, I don't see that it's wise to spend money on an expired product somehow.

  At some point, you'll have to buy another software, because there will come a time where iWeb work not at all, as you have already discovered with iWeb 08.  There is nothing that you can do with iWeb 08 and you will have to go back to your old machine if you insist on using it.

  Unfortunately, you will find that all new software will be of a similar price and EverWeb are priced at £79 is in no way over the top.  Is an also smaller learning curve, because it is very similar to iWeb next, feeling and function.

  You can take a look at the Freeway Pro/Express - they sometimes offers that make it more affordable and I have to tell you that Freeway is more expensive than EverWeb - they had an offer on last year, where you could get Freeway Pro for £69.  Take a peek inside.

  There is also a flow 6 or 4 WebAccapella you can take a look at, but at some point, you'll have to bite the bullet and spend.

  Nothing you can do with iWeb 08 - go back to your original like that computer won't work with something else.

• I found flaws in all of the calendars and the scientific calculators of Apple products. How can I send you my report pages 20 as a matter of course. Who should I go. This is a real case, and I am willing to work with Apple on this issue.

  Dear Sir/Madam,

  Topic: Default in some Apple products (important issue).

  This is not an unsolicited idea or suggestion (Please read)

  First of all, allow me to introduce myself as a teacher of mathematics, with more than 20 years of experience in the teaching of mathematics in Jordan.

  I take the liberty to write to you on a very delicate issue regarding the above topic. I'll try to be direct and fertilizers to point.

  Eight months ago, I have established contacts with the customer at Apple and succeeded to in explaining my intention to work with Apple on the flaws I found in all the following Apple products:

  -Scientific calculators built into the Apple iPhones and other products like Mack book pro (13 keys/operators applying bad mathematical concepts).

  -Calendars integrated into Apple iPhones and iPads (after a certain date).

  -Most of the calculators downloaded on Apple iPads (application).

  With my main concern during the final user, I already have reports submitted to Apple on the six keys with solid evidence and evidence supported with excerpts from various reliable resources that are no doubt as to the failure of these keys. I also presented copies of the date on which the calendar goes off track.

  Now iPhones for new generation of Apple (6s and 6 s-Plus) have already been launched on the market, keeping the same flaws, I decided to start contacts with Apple once again, hoping to succeed in reaching the right people at Apple to continue my rage in finding that the right to address this issue. I hope that you will respond positively.

  My worries and concern are oriented towards the end user and, in particular, students who take the responses of these calculators for granted when they are wrong and they don't realize.

  I have prepared a 20 page report although detailed on these defects and how to correct function solid evedence of reliable math textbooks. I'm ready to send this report to the person/department concerned, on which they can check and verify my claim with any or all of the following:

  ·       Apple/mathematicians engineers.

  ·       The mathematics books that are published by well known/good reputation

  publishers.

  ·        Calculators Casio or TI as the most reliable calculators in the world.

  ·        Reliable sources of mathematics of the internet.

  ·        Presentations power point math on YouTube.

  .        Math teachers well known working in renowned universities

  ·        American Mathematical Society.

  I reiterate my willingness to cooperate on the question above so that the genetions coming Apple products will be free by all means!

  I look forward to your positive reply,

  Sincerely,

  Nael

  < personal information deleted by host >

  This is a user to user forum.  Your message must be addressed to the Apple company.  Maybe a letter to Cupertino, California, is in order.  Your letter will receive no valid response here about your concerns.

  Ciao.

• search for a driver external hp555s updatewon can't work with windows 8

  Hi, my cd/dvd rewritable external drive does not work with windows 8, is there an upgrade for this writer, had it for a few years, worked very well with win.7 but can be used with win.8, need help! Thanks Gloves54

  Hi, my dvd/cd external driver problem has been resolved, I chatted with the Acer support assistants (my laptop with the problem), they gave me a link to the microsoft driver which solved my problem. My external cd/dvd drivers are now recognized by my computer and can be used. Thanks to the honor student for trying to help me with my problem.  Happy holidays!

  Gloves54

• Cannot access files on hard disk on windows xp, after I worked with it on win 7.

  Cannot access files on external hard drive on windows xp, after that I worked with him on Victory 7.I can see the file, but he says "is not accessible. access is denied. " Can someone help me?

  As you can guess, this is a permissions problem.  Here, it makes a difference if you have XP Home or Pro you have to safe boot mode to change permissions in the House.

  My crystal ball says that your external drive is formatted with the NTFS file system.  When you connected to Windows 7 (or any other computer besides), the files have been added that this user permissions apparently understood that only Win 7 has access to.  There are several ways to handle this...

  Is to save on all your files and reformat the external hard drive with a FAT32 file system and then support files.  You will have no problems of permissions with FAT32, but you can't have any higher than 4 GB single file either.

  Another way is as an administrator, to 'Ownership' of all the files on the disk
  "How appropriate a file or a folder in Windows XP"
     <>http://support.Microsoft.com/kb/308421 >
  but this could get old if the drive moves back.

  Yet another approach is to give "Everyone" full access to everything on the drive.  This may or may not protect against new folders or files added, but may be worth a try:
  As a user administrator, open a command window:
  Start-> Run-> "cmd".
  Then, enter the command:
  CACLS E:\/t/e/c/g everyone: F
  (where I am assuming that your external drive is mounted as "E:" - change of real player)

  I hope that something more top is useful...
  JW

• HP officejet 6500 a printer works with Mac Mountain Lion but scanner is not

  had a 10.6.8 imac and I used and scan with hp printer HP officejet 6500 a.

  Just got a mac mini 10.8.4 and the wizard migration used to move all my programs and information.

  The printer works just fine but the scanner does not work.  When I try to start the scan by pressing the printer screen it says computer no. detected as part of the message.

  If I click on the scanner icon on my dock it says

  HP Scanner 3 cannot be opened locks of Aproblem.  Check with the developer to make sure that HP Scan 3 works with this version of Mac OS X.  You may need to reinstall the application.  Don't forget to install the updates that are available for the application and OS X.  There is also a report I can click on and sent to apple.

  I got a free mini mac technical support - they helped me with the migration, and then a few days later, I called for what they help me with things that were not working as before.  All resolved but this.  They said contact that HP may be there is something that I can download to make the scanner work?  Hope I don't have to buy a new printer.

  Thanks for the tips .

  Hello

  Yes, go ahead and put this folder in the trash, I would also suggest restarting the Mac and repair disk permissions in order to avoid any possible permissions errors that can impact on the installation:

  Hello
  Follow the steps below to repair disk permissions:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Once you have finished my steps above to reinstall the software.

  Shlomi

• I have a windows vista desktop computer. My usb adapter see all fi networks wi and the lapttops work with it, but it says that it cannot connect when I try to connect. What is my settings on my pc?

  My computer settings re-put recently. It's not the adapter I bought a new and the wi - fi works very well. Help, please! I already did the thing where you go on manage wi fi represents and has deleted information and tried again, but they don't seem to work.

  Hello

  
  

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  
  

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

• Why my webscan on HP 6700 won't work with mac OSX Mavericks?

  I have a new mac mini, a new HP Officejet of 6700. Everything works on the officejet except the webscan, the only way I can scan is at the front of the printer and only in color which is a big problem. I downloaded the new version of the drivers that supposed to solve the problem of the Mavericks, but still cannot use the scan in the program function. Help, please! I need to scan documents in black and white or I will have to return the printer to the store and buy another brand that works with Mac.

  Hello divegirl7,

  Welcome to the HP Forums!

  I understand that you are unable to Webscan using the award-winning Officejet 6700. I will do my best to help you! For this printer, it is the full features software that will allow you to use the HP software. Please follow these steps:

  Make sure your Apple to complete on your computer updates. Please follow this document Apple here to help you. Then, you want to repair the permissions of the drive to your computer here.

  If you are still unable to use the scanning software, then I recommend uninstalling the software. Once this done, please install full software features on the HP site here.

  Please post your results, I will be looking forward to hear from your part, have a great day!

• Get EqualLogic to work with Ovirt

  If anyone has any questions get Ovirt to work with EqualLogic the following link may be useful:

  https://sites.Google.com/a/Keele.AC.UK/partlycloudy/ovirt/gettingovirttoworkwithdellequallogic

  Ovirt is a very good free alternative to many commercial vm management solutions.

  One thing to change is the path_checker in/etc/multipath.conf.   There is a bug in Multipathd, manifested with the EQL firmware 7.0, since it's 4K sector.  When you use readsector0, it causes a protocol error just after the connection.  Change readsector0 "tur" or "arm."

  It's what I generally use for EQL in /etc/multipath.conf

  the default is {}

  udev_dir/dev

  polling_interval 10

  path_selector ' round-robin 0 ".

  path_grouping_policy multibus

  getuid_callout "/ lib/udev/scsi_id - list blanche--device=/dev/%n.

  path_checker tur

  rr_min_io 10

  setting 8192

  rr_weight priorities

  immediate restore

  no_path_retry fail

  user_friendly_names Yes

  }

  Also make sure the interface file at the same time iSCSI_ifacename and net_ifacename

  Cat/var/lib/iscsi/ifaces/eth0

  # BEGIN 6.2.0 - 873.2.el6 RECORD

  iface.iscsi_ifacename = eth0

  iface.net_ifacename = eth0

  iface.transport_name = tcp

  iface.vlan_id = 0

  iface.vlan_priority = 0

  iface.iface_num = 0

  iface. MTU = 0

  iface.port = 0

  # FILE END

  A couple of current settings of /etc/iscsid/iscsid.conf

  ################################

  session and device queue depth #.

  ################################

  # To control how many orders the session queue together

  # node.session.cmds_max to an integer between 2 and 2048 is also

  # a power of 2. The default value is 128.

  node.session.cmds_max = 1024

  # To the queue of the device to set depth node.session.queue_depth control

  # to a value between 1 and 1024. The default value is 32.

  node.session.queue_depth = 128

  node.session.iscsi.FastAbort = No

  Kind regards