Commissioning a public SIP server for Jabber user doen't seem to work

Similar Questions

• How to register ActiveX exe server for all users

  Hello

  I'm aware that with newer versions of the CVI and Windows when you generate an ActiveX exe server, it records only the server for the user profile.  I read one white papers OR who said that computer administrator may register the server for all users.  I am an administrator for the development of PC we use.  I went to the command and he ran as the administrator of the PC.  I then navigate to the path of the exe.  I published the regserver command.  Unfortunately, I am unable to distinguish if the server exe was registered for all users or if it combined again to my user profile.  Our server exe is called by another program of the CVI.  To validate if the server exe had been registered for all users, I had a user who had not built server exe on the development PC connection and try to start the server within its own CVI program exe.  When this has been attempted, the user receives an error "class not registered".  The user was not able to successfully launch the exe of the server until it has built on the PC itself.  It does not appear that the administrator regserver command worked to save the exe file of the server for all users.  Is anyone aware of any steps that I may have missed?

  I'm working on a Windows 7 with Service Pack 2 for LabWindows/CVI 2013.

  Thanks in advance.

  You will probably have to use Google.

  http://social.msdn.Microsoft.com/forums/en-us/0022ca21-CAA2-4be5-b519-757ff9daf7fb/how-to-register-3...

  or maybe http://social.msdn.microsoft.com/Forums/vstudio/en-US/4fb96971-53a1-4e25-bc75-b49cfaf4d574/problems-...

• Webcam stopped working for one user, still works for another user

  I use 2 UserProfile on my laptop.
  For 1 user, software of the webcam works as expected.
  For 2nd user webcam no longer works.

  For this user:
  -Webcamsoftware automatic start does not (traybar).
  -Manual start does not work either.
  -I can see that for each attempt, conhost.exe starts but no traybar.
  -In the systray, I see the icon that appears, but after a few seconds it disappears.
  -In syslogs, following error:
  Naam van toepassing met doing: traybar.exe, versie: 1.5.4002.79, tijdstempel: 0x46e9fe5c
  Naam van module met doing: traybar.exe, versie: 1.5.4002.79, tijdstempel: 0x46e9fe5c
  Uitzonderingscode: 0xc0000005
  Foutoffset: 0 x 00001410
  Trial ID van met with care: 0x16f8
  Starttijd van toepassing met doing: 0x01ccecdf12fc5566
  Met toepassing naar cushion care: C:\Program Files (x 86) \Camera Assistant Software for Toshiba (2. 0 m) \traybar.exe
  PAD naar module met doing: C:\Program Files (x 86) \Camera Assistant Software for Toshiba (2. 0 m) \traybar.exe
  Report id: 5a545dcd-58d2-11e1-9c2d-463500000031

  Hello

  You can try to reinstall the software of web cam once more.
  During the configuration of the installation, you will be asked if a single profile of a user or all users of laptop would be able to get access to the webcam software.
  You choose the setting for all users.

  Welcome them

• Authentication problem of proxy server for the domain while accessing internet users?

  We have a problem in my company with the proxy server.

  We have an Isa proxy server to restrict some users who access the internet

  allow us some users and sites for them to access

  but some times it requires authentication for all users who have access also. At that time they keep calling us. so I created a temporary rule to allow all traffic for all users. After awhile, we disable and it is working... but in some cases allow same temp rule also does not work so we say - join the domain and join the domain again...

  It seems that these are all temporary, full-time for us of how, it became

  Is there a permanent solution to this problem...

  Please help us solve this problem

  Thank you and best regards,

  Hi jagdeeshk,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• How can I block the SMTP for all users but mail server

  I can't understand (1) how can I refuse port 25 for all users on the network and allow for Exchange server SMTP, also I have MS Exchange, which manages the web and smtp and in my setup below you can see that there static mapping to publick ip with http/smtp only, then (2) how can we separate the traffic entering a publc IP will outside servers inside ex : (MSexchange public ip address is x.x.x.207-> http = 172.16.2.13, 172.16.2.14 = smtp)

  Thank you

  ___________________________________________________

  6.3 (1) version PIX

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  names of

  name 172.16.4.10 pdc

  name 172.168.4.11 llc

  name 172.16.4.11 ftp

  object-group service E-mail tcp

  port-object eq www

  EQ smtp port object

  object-group service tcp - udp terminal

  3389 3389 port-object range

  object-group service mw tcp - udp

  Beach of port-object 367 367

  radmin tcp service object-group

  RemoteAdmin description

  4899 4899 object-port Beach

  object-group service mw1 tcp

  Beach of port-object 367 367

  access-list 101 tcp refuse any any eq smtp

  access-list 101 permit tcp any host object-group x.x.x.251 terminal

  access-list 101 permit tcp any host x.x.x.214 object-group radmin

  access-list 101 permit tcp any email host x.x.x.207 object-group

  access-list 101 permit tcp any host x.x.x.212 object-group mw1

  access-list 101 permit tcp any host x.x.x.211 eq ftp

  sheep ip access-list allow any 192.168.101.0 255.255.255.240

  IP address outside x.x.x.194 255.255.255.192

  IP address inside 172.16.2.1 255.255.0.0

  IP verify reverse path to the outside interface

  IP verify reverse path inside interface

  alarm action IP verification of information

  IP audit attack alarm drop action

  IP local pool mypool 192.168.101.1 - 192.168.101.20

  don't allow no history of pdm

  ARP timeout 14400

  Global interface 10 (external)

  NAT (inside) 0 access-list sheep

  NAT (inside) 10 0.0.0.0 0.0.0.0 0 0

  static (inside, outside) x.x.x.212 172.16.4.12 netmask 255.255.255.255 0 0

  static (inside, outside) x.x.x.251 172.16.4.51 netmask 255.255.255.255 0 0

  public static x.x.x.214 (Interior, exterior) pdc netmask 255.255.255.255 0 0

  public static x.x.x.211 (Interior, exterior) ftp netmask 255.255.255.255 0 0

  "REM # 172.16.2.13's Exchange with Outlook Web servers #

  static (inside, outside) x.x.x.207 172.16.2.13 netmask 255.255.255.255 0 0

  Access-group 101 in external interface

  Route outside 0.0.0.0 0.0.0.0 x.x.x.193 1

  enable floodguard

  Sysopt connection permit-pptp

  VPDN PPTP-VPDN-group accept dialin pptp

  VPDN group PPTP-VPDN-GROUP ppp authentication pap

  VPDN group PPTP-VPDN-GROUP ppp authentication chap

  VPDN group PPTP-VPDN-GROUP ppp mschap authentication

  VPDN group PPTP-VPDN-GROUP ppp encryption mppe 40

  VPDN group VPDN GROUP-PPTP client configuration address local mypool

  VPDN group VPDN GROUP-PPTP client configuration dns 172.16.2.6 172.16.4.6

  client PPTP-VPDN-GROUP VPDN group configuration wins nymc_pdc

  VPDN group VPDN GROUP-PPTP pptp echo 60

  VPDN group VPDN GROUP-PPTP client for local authentication

  VPDN username * password *.

  VPDN allow outside

  This is your problem:

  Access-group 101 in external interface

  You link this access list to your external interface. This means that the rules are applied to incoming traffic IN your network. The implicit IP any any rule is because you have not bound to an access list on your inside interface.

  To prevent users from going out, you will need this:

  access list permit tcp host exchange_IP OUTPUT no matter what eq smtp

  access list tcp OUTPUT deny any any eq smtp

  Access-group interface inside OUT

  See how this access list is linked to the inside interface... it will affect traffic leaving your network. Note: Once you apply this inside allow any interface it will remove the implicit.

• Terminal Windows 2008R2, 17.01 Firefox server hangs after startup for all users

  We have 2 servers RDP with Windows Server 2008R2, we recently updated firefox since version 9 version 17.01 because of flash plugin crashes. After that the firefox update blocks very regular for each user.

  After you open a site, we see it for a fraction of a second, then
  The error message depending on whether we get:
  "Firefox has stopped working".

  This is the case for most sites, some sites work however, as www.google.nl
  Sites that do not work for example:
  www.YouTube.com
  www.nu.nl
  www.UNOX.nl

  I thought it would be flash again.
  What we tried:
  -Firefox to uninstall and reinstall again.
  -Uninstall Flash player and install it again.
  -Disabled all add-ons
  -tried save mode
  -tried this one: https://support.mozilla.org/en-US/questions/922902?esab=a & as = aaq
  -tried this: https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles?redirectlocale=en-US & redirectslug = Managing profiles #os = win7 & browser = fx17
  -Firefox default factory reset
  -Old version 16.02 (after uninstalling 17.01)

  I'm a little short on options.
  Any help would be much appreciated!

  Kind regards

  Joost

  Luckily a colleague of me figured it out!

  It turns out that the cause of the firefox crashes came from a security layer installed with the ESC Secure Layer that uses an application called Manager of funds
  The dll that the accident was referring is used by this program. Find that out was the hell google is now filled with the nonsense of 'check your PC for malware' stupid on a search for the dll.

  After removing the application, FF works fine again without crashing.
  So it seems a compatibility issue with Firefox and Money Manager

  Thanks for the help and I hope that someone in the future will have something on the solution we have found.

  Cheers!

  Joost

• Windows server 2012 RDP Clipboard does not work for regular users

  Hello again,

  I wanted a little more secure our 2012 server.

  I disabled via GPO, local disk and printer redirection when a user connect through rdp.

  But I activated the policy to users, so while you can do the redirection of the Clipboard between there pc and rdp Server (copy / paste)

  Problem is that it works in only for the admin.

  The fact that local drive redirection is disable that copy / paste does not work?

  Force the update of the Group Policy object and I sign the user out and reconnect and copy and paste does not work

  and also, the process rdpclip.exe is running. I have restart this process.

  Any help or guide

  Thank you once again.

  Hello

  As I mentioned in your other Thread that we do not respond to server problems in this community.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How can I increase size of mail for some users only in exchange 2003 or the smtp server

  I have 2 break the two server installed ms 2003, an Exchange and a another smtp, Smtp is independent, not added to the domain. My business mail size is limited to all users maximum 5 MB.  But now I need to increase the size of the mail for specific users, and not for all users. can I create a policy for this. Can I increase size of mail for users of 10 or 15 MB. If can where I can configure this option. Exchange or SMTP. Please give me counsel.
  Thank you & best regards
  Anas

  ASK THE QUESTION IN THE EXHANGE SERVER FORUMS:
  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer/

• Hardware requirements for MS SQL Server for about 100 concurrent users

  Can someone suggest the hardware configuration required for MS SQL Server for about 100 concurrent users?

  Microsoft page suggests 2 GHz CPU and 4 GB of RAM, but it does not mention the number of users. Wonder how many users affects the performance of MS SQL.

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on MSDN. Please post your question in the MSDN Windows Server forum.

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/

• Microsoft Exchange Server error make a new box for the user's mailbox in my ad

  while I try to make a new mailbox for the user in my ad.
  There was an error...

  "Get-ExchangeServer failed.
  "Get-UMServer failed.

  "The server active directory K1.telkomcdp.com is not available. Error message: a local error has occurred. It was running the command ' get-recipient - Resultsize '1000' blah... blah... blah ".

  and active directory cannot be contacted

  I try to solve this problem all night... but it isn't anything happen,.

  need help
  Thank you

  Hello

  You will need to create a new post on the TechNet site for support with Exchange: http://social.technet.microsoft.com/forums/en-US/category/exchangeserver/

• Jabber - user name cannot be changed on the first v11.5 for Windows installation

  I am posting this because once again it becomes chronic as people get new laptops and install new versions of 11.5 Jabber

  There was only 1 answering machine on my previous post, and didn't us get any where.  His response was to start the installation with the switch to NO search of WebEx service.  When I pointed out that we must seek to WebEx Messenger, but that our usernames for Messenger and WebEx meetings are separate, the thread is dead.

  Is there anyone who can tell me how to install Jabber for Windows 11.5 so that the user is not EXCLUDED to change the username on a new install?

  ************************************************

  We have installed just 11.5 Jabber on a couple of new corporate machines (Win7 using Skype as IM Corp)

  We have a Jabber ongoing performance using WebEx Messenger driver, so we have no SSO or AD integration.

  After a clean installed Jabber with no switch and no custom URL (we just downloaded CiscoJabberSetup.msi for v11.5 and ran in the download on the machine folder) the screen to connect comes but the user name is already filled so it is GREY you can change.  The format is our corporate email address.  We are also no "Reset Jabber" option in the file menu. Which is gray as well.

  Then, we took another machine and installed from the command line with that for options:

  "msiexec.exe /i CiscoJabberSetup.msi CLEAR = 1 CLICK2X = DΘSACTIVER"

  Same question.

  So, where is Jabber pulling these usersnames and why we can not change it?  Why does "Reset jabber" clothes outside too?

  I have a feeling that it is because UPN_Discovery is automatically enabled (for autousername population). Can you try to install Jabber with disabled UPN_Discovery?

  MsiExec.exe /i CiscoJabberSetup.msi UPN_DISCOVERY_ENABLED = false CLICK2X = DISABLE

  To run as an administrator, open the windows in administrator mode command prompt (right click on Start menu on windows 8) and browse (> cd) to this location for jabber Installer CiscoJabberSetup.msi and copy / paste this command.

  Reset gray is indeed a bit odd.

• I have Windows Server 2008 R2. I have set up the desktop remotely for 5 users, but each time a user logged on to the other user will be disconnected.

  issue license remote dekstop

  I have Windows Server 2008 R2. I have set up the desktop remotely for 5 users, but each time a user logged on to the other user will be disconnected. Is this a problem with the license? Is it how do I get license for 10 users remote desktop? Thank you

  You will get the best answers by posting in the dedicated remote desktop on TechNet Forum:

  Remote Desktop Forum services (Terminal Services)

• Mirage Management Server installation 5.1 - "unable to validate the permissions for this user account.

  I'm installing Horizon Mirage 5.1 server on a Windows Server 2012 R2 VM management. The SQL is located on a Server R2 VM with SQL 2012 2012. We have created a Mirage service account that has permissions of db_creator on the SQL Server. When we run the installation wizard we get the "unable to validate the permissions for this user account. Unable to connect to the database. The control server name, the name and server instance parameters"error message. We tried to make the local admin of the SQL server service account and the Mirage Mgmt server. We tried you identifying as service account and by running Setup in this way. Windows Firewall is disabled on both virtual machines. When we enter the SQL Server name and the instance use < servername > without an instance because it is an unnamed instance. Does anyone have other ideas? Cannot find much out there for KB articles. I'll open evidence of the support if it takes too long to understand.

  The service account, we created had a "database default" set in SQL. We chose the database and he continued as planned.

• How can I disable the MonitorPrintJobStatus on Server 2008 R2 RDS for all users?

  We have a Server 2008 R2 RDS with HP LaserJet printers installed.  At every printjob printer monitor HP arrives.

  How can I disable this printer for all users?

  THX

  Tcpip

  I found it here:

  http://h20000.www2.HP.com/BC/docs/support/SupportManual/c00767072/c00767072.PDF

  the registry key is

  SSNPNotifyEventSetting REG_DWORD 0x00000001; 0 = disabled.

• How to enable detailed interactive report view by default for the user public?

  Hi all

  I'm developing a page of search results.

  I'm doing a view instead of a default table view of interactive reports. So in this case I activated the details view so that I could make the fancy designs.

  everything worked well and looked clean but however when I pass the value of my search using IR_ROWFILTER page and clear the results page using page_noIRB, it brings me to the result page of interactive reports with the default table as point of view.

  I have to press the detailed view to get. I tried to save it as a default value, but it won't work. This question is for user public.

  If I do the page requires authentication, and record the detail by default view, I wouldn't have any problem. I could search and it will bring directly in to the detail view of the search page.

  of course, the other reason that I found is because im using the IR_ROWFILTER and by disabling the page using page_noIRB... without it, it works well, but I need it coz im making a a search result. I need to send the text to search for another page and put it in the filter to the search page. I would need to use the IRB to search again.

  is this a limitation to the user public? It happened for the authenticated user but...

  How can I make the default view for the user public?

  T101_cyberdyne wrote:

  How can I make the default view for the user public?

  Reverse the report for details on the loading of the page using a dynamic action of loading the Page with the following Execute the JavaScript Code real action:

  gReport.data.view('DETAIL');

  I'm doing a view instead of a default table view of interactive reports. So in this case I activated the details view so that I could make the fancy designs.

  Do you really need is an IR? Other that the layout of detail, do you need any of the interactive features? If not, try to use a standard report with a a report model custom.