Commissioning does not end.

Similar Questions

• the new beta version that tries to be eliminated, everything is there and does not end when I aggree to install it. I'm on a Mac with OSX 10.9.3.

  the new beta version that tries to be eliminated, everything is there and does not end when I aggree to install it. I'm on a Mac with OSX 10.9.3.

  HI sselden,.
  Thank you for your question. Currently the version that you are on the old version. The current version is 29 and the beta version is 30.

  I recommend you to install a new beta version or the more up-to-date. http://www.Mozilla.org/en-us/Firefox/channel/

• Satellite L355 - dreaded blue screen - Bios does not end

  I have a new Satellite L355.
  Sometimes at startup I get the DBS.

  Otherwise said, the bios does not end and the screen is blank.
  Laptop repair center replaced the motherboard twice, but I still have the problem.
  I found that if I turn off the power and remove the battery, I can start very well after the replacement of the battery.

  Does anyone know why the battery clears the problem?
  Toshiba technical support often has a user that to clear a trouble report. They must know something.

  Thank you, jack

  > Occasionally when booting I get the DBS

  That would mean that this sometimes happens from time to time but not always
  Is this good?

  I think that it of difficult to say what's going wrong here because the question is not always happens... so it is difficult to replicate it
  Usually if the POST (power on self-test) cannot transmit properly then that would mean that a material error has been detected somewhere on the map

  Maybe you should check if the laptop using the latest version of the BIOS.
  If a new BIOS has been published, then you should try to update.

• My download CS6 manages at the end and fill the bar but hangs and does not end?

  Any help on the above would be welcome. I am operating an iMac with OS X Maverick 10.9 and the download starts and runs OK, gets 3.78 3.78 GB GB but then does not end and hangs at this point?

  I downloaded successfully, now after connecting the router to the iMac with an Ethernet cable, so even if it was able to fully download on more than once for some reason any it would not complete and open the disk image to install.

  Thanks for your help.

  Concerning

  Mark

• My "restore from backup" does not end as the screen lock appears

  I got a new iphone with 64Meg and OIS 9.3.3 6 operating system. Before putting in my business phone; I backed up my data on itunes using my PC with Windows 10. As I'm trying to "restore backup" on an iphone same 6, I was unable to do, when to halfway through the download process, the screen lock appears and disconnect the iphone from itunes and the download stops. It seems to be appx 29 minutes for download; but I never got rained only 7 minutes to download completion before the screen is locked or the battery at 100% load indicator disconnect the iphone.

  I have disabled all notifications, deleted my AOL Mail, set the screen saver to "never", off of password, all without success. Help!

  Hello, Franklytex!

  Welcome to the communities of Apple Support and post your first message! Looks like you have a problem to restore your backup from iTunes. I know how important it is that your iPhone can be restored properly! Read this article which has steps for you If your iTunes backup could not be completed or you can not restore from a backup. More precisely:

  Try again after each step

  1. Make sure you have the latest version of iTunes.
  2. Connect your device to your computer with a cable USB, then Select your device in iTunes. If your device does not appear in iTunes, you must correct this problem until you can continue. Or, if you have forgotten your password or your device is off, know what to do.
  3. Turn off your computer and your iPhone, iPad or iPod touch. Then turn on again them.
  4. If you use a Mac, skip this step. If you use a Windows PC and iTunes will not respond or never ends your backup, you may need to to update, edit, disable or uninstall your security software.
  5. If you have multiple computers, try to make a backup on your other Mac or PC. Otherwise, use iCloud for save your device and restore it from your backup to iCloud.
  6. If you see an alert indicating an error has occurred, your backup is corrupt or incompatibleor there is not enough disk space, find your error message below to learn what to do next.
  7. Contact Apple technical support.

  See you soon!

• ISO burned, boots, but does not end... MacBook Pro (early 2011)

  Downloaded the right firmware (thanks for the advice - the ID of the box compared to the system profile ID - they were different).  It burned on a CD, booted from it.   I must say here that my old internal DVD/CD is now external because I put a HD instead.  The boot goes to black screen, a text scrolls at top, then it goes to a command prompt flashes and sits there.  CD towers down and nothing heppens.  If there is a period of time between the first line and continued to give, I'll try again, but I felt that it was fine.  Don't want to go mucking around and make the SSD to become a paperweight, so I stopped for now until I hear back.  I don't think the fact that the SuperDrive is now external is originally the one, because it does not start.  I do, however, not press 'C' to start, I use the Option key to select the disc.  The disk is external now maybe isn't able to do (did not try).

  I have DSS take - the box it lists as a DHP, shows the system report: SanDisk SDSSDH2256G.  So I downloaded the H2 version.  I do not know how critical this update of the firmware is, if it's not I'll stop trying because he could end up in disaster if done wrong.

  Thanks for the tips.

  Tom

  IIRC external CDROM cannot be used. I would like to move the HARD disk to the CD/DVD drive do the update and then replace the HARD drive in

• X 64 Vista Home Premium CHKDSK does not end. No errors.

  I am running Vista Home Premium 64-bit and I get chkdsk runs whenever I start. It runs from stage 1 and complete with 9% of total. Then he will begin to step 2 and 55% of total and the program will stop. However, Windows will continue to start. The problem is that when I try a system restore, it fails and says that there is errors on the disk C: (part of Windows). I tried using F8 repair this computer option and get the same results. I bought and OEM "Vista repair disk" which looks exactly like the F8 option and she also does not terminate and the system reports errors on the restore disc. I tried the "right click on the hard drive" with windows to the top one and error-checking and it will plan a more late and ending. I got a call from the OEM Disk Checker 3.3 of the RS Software Lab disc verification program. I can get it to run and report errors, but I can't seem to fix. It will also schedule chkdsk to run pre-launch who did not finish. What can I do else?

  Hello

  You can follow the methods below and see if it helps.

  Method 1

  You can perform a clean boot to find with which service third is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Method 2

  If the problem persists, you can browse the drive in safe mode check and see if it helps.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 3

  If safe mode does the same thing, then start at the prompt of the WinRE and run the command chkdsk from there.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• Envoy in contact form does not end in sent items

  First of all, a nice feature is what preceded this form (trying to answer my question and undo/resolve the workload of duplicate messages), where I'm typing now.

  I see two to be descriptive. Good point... but fortunately, I can be concise, and I'll get right to the point.

  My dad said that a form of contact presented in the browser does not (not) found in the sent items of the email client. Which is probably a good thing.

  It would be a good deal to represent? It is useless, but for a system administrator to do it manually. So he would probably need a script...

  )

  PS: search powerhungry Google for 'thunderbird sent form elements' (should have that in the representation of Thunderbird...); It might be good to separate the content from that of other pieces on the Web page... perhaps that Google reads. A good deal for the hubs! Or webrings as we were doing it at the time to call them. All voluntarily.

  You are trying to read through all the unwanted extra in your post, I think your question is why items sent with the web mail interface do not appear in the folder sent to Thunderbird or any other e-mail client.
  Best estimate is that you use POP email and that's how it works. POP email only interfaces with the Inbox.
  If you want all folders to synchronize you should use IMAP E-mail.
  Google that.

• The startup process does not end and the system keeps restarting

  From the time my system has been upgraded to El Capitan, I have a problem with the startup of the system. The login screen has horizontal lines. The system does not start properly and begins to restart before completing the startup process. After 10 or 15 attempts, the system starts. Only when the login screen appears without those lines, I know that the system should start. Once it starts, all of a sudden the screen freezes and system crashes too.  This happens usually when I try to open a large file, Powerpoint or Adobe Acrobat. Or the screen moves to the right and the screen freezes and I have no choice other than to restart the system.

  Service center staff has stated that there is a problem of display driver and updated. But it's always the same problem. What could be the problem and how to solve?

  Thank you

  Olivier

  Download and view a report of Etrecheck;

  http://www.etresoft.com/etrecheck

  Ciao.

• I have Outlook Express e-mail Icon stick on opening and does not end is there too much mail, how can I fix it?

  When you click the icon to open my Outlook Express icon (envelope) sticks on the screen of the monitor and does not open. Is there a way to get into the program to remove at least half or the whole of all the e-mail. It was not opening now for several days if I'm afraid it's risk of stuck with e-mail. I have been looking for a job online and get a ton of e-mail. I can get through the control panel and I think I saw the problem, but I don't know how to remove it. Help!

  I welcome suggestions. Rosemary

  Folders.dbx is probably damaged.

  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  The path to the message will be very similar to this:

  C:\Documents and Settings\Your User of utilisateur\Local Settings\Application Data\Identities\ {long string of letters & numbers} \Microsoft\Outlook Express

  With OE closed, find the Folders.dbx file and delete it.  Another will be created automatically when you open OE.

  Note these possible side effects:

  When you re - start OE, it will build a new index of all *.dbx files it can read and create a new Folders.dbx. However, understand that you will lose the mail directory structure and message rules will probably have to be edited.

• Vista-Defrag HD does not end

  When I tried to run defrag manually it will run for hours and does not complete

  Hi cms1956,

  Please try and do a clean boot on your system to see if that helps you with the problem you're having with your computer defragmentation.

  Step 1: Perform a clean boot

  a. connect to the computer by using an account that has administrator rights.

  b. click Start, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  c. in the general tab, click Selective startup, and then clear the Load Startup items check box. (The use original Boot.ini check box is not available.)

  d. in the Services tab, click to select the hide all Microsoft services check box, and then click disable all.

  e. click OKand then click restart.

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services checkbox.

  c. click to select half of the check boxes in the Service list.

  d. click OKand then click restart.

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OKand then click on restart.

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. click Start, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  b. on the general tab, click the Normal startup option, and then click OK.

  c. when you are prompted to restart the computer, click restart.

  Please see the following article for all of the above information: http://support.microsoft.com/kb/929135

   

  Please let us know if this solves your problem, or if there is something more, you want to help with.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I try to install the im creative cloud my iMac and the process hangs and does not end. What can I do to solve the problem?

  I try to install the creative cloud in my iMac and the process hangs and does not complete. I've used the creative cloud cleaning tool...

  What percentage he block?  About 42%, open activity monitor when it crashes and complete the process of helping adobe dangling.

  otherwise, troubleshooting installation using newspapers in Photoshop Elements

• Re-installing Adobe CS6 does not end

  Hello! After os updated my Adobe CS6 re-Setup does not complete. What should I do? Fr. Heidi

  uninstall, clean and reinstall by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• I downloaded my Adobe Elements, but it does not end like it says I have a 32-bit program, but my computer is a 64-bit

  I bought my program of the library of the University and after that I downloaded the program on my calculation it now says I can't because it is a 32-bit program and I have a 64-bit computer.  He didn't choose me an and I looked at my package but it does not say its 32-bit only.  How can I get this resolved?

  You install a package? The package is created separately for 32-bit & 64-bit.

  Please check Silent install instructions | Photoshop Elements | AOO volume license version. Mac OS .

  Error "serial number is not valid for this product". Creative Suite

  You may need to create a new package with the chosen correct bit.

  You can also contact the Adobe Support at http://adobe.ly/yxj0t6 .

  Concerning

  Baudier

• Elements 9 does not end of installation

  Ihave photoshop elements 9 and does not complete the installation. Almost finished then I get a message saying that the installation has been suspended and he erased what I have down, disappears from the icon on the desktop.  I had the company in India - support Mart - try installing and that they could not also.  This disk can be returned to Adobe for a new

  disc? Help.  < removed by the moderator e-mail address >

  Follow the instructions and you can download a trial of your program (s): http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml

  Use your license to activate.