Commitment issues

Similar Questions

• Questions about the feature is committed

  I had a few sales reps to communicate performance with commitment issues.  Does anyone have experience or comments on the following?

  1. the delay between when the email is sent and received.

  2. check the spelling.  Is there a spell check in commit?

  3. when hyperlinks are incorporated into the model, is there a way for the rep see what are the links before you send the email?

  Any comment is appreciated.

  Hi Marilyn.

  For spell checking, most browsers have an integrated spell check and are very good!  just, you make a right click on a misspelled underlined word and select one of the suggested corrections

  

  For the preview of hyperlink, you bring up the linker by placing your cursor over the link by clicking on the hyperlink button.  This shows you the exact URL it points to.

  

  But if the link is redirected, it can sometimes be difficult to see where this will end.

  Egan

• Table programming don't hear is committed

  I have a table control that I created by NewCtrl program.  I put its control mode to VAL_HOT so that it will listen to validate events when I edit the cells.  And yet, the EVENT_COMMIT never happens.

  A test, I created a table in my UIR, put in hot mode and put a DebugPrintf in the EVENT_COMMIT case.  Triggers as expected when I change a cell.

  Now to my programmatic table, all my other events trigger as expected:

  • EVENT_RIGHT_CLICK
  
  
  • EVENT_LEFT_CLICK
  
  
  • EVENT_LEFT_DOUBLE_CLICK
  
  
  • EVENT_GOT_FOCUS
  
  
  • EVENT_LOST_FOCUS
  
  
  • EVENT_TABLE_ROW_COL_LABEL_CLICK

  What else do I need to define an array of programming to make commits to answer?

  OK, I have this resolved now.  It was a mix of issues.  This project is part of my another series of questions here, where the first thing that happens in my essay is that I spend monitors (with the help of a DiscardPanel and DuplicateCtrl).

  For some reason, the DuplicateCtrl does not seem redundant with the status of control mode.  So after I have move monitors and call the DuplicateCtrl, I need to reissue a call to change its attribute to control mode.  Turns, just this one:

  SetCtrlAttribute (main, tableControl, ATTR_CTRL_MODE, VAL_HOT);

• I have my ID Windows Live ID have not used for quite awhile and I would like to start using it again, the live ID is always committed, however I don't remember the password

  Hello, I have my ID Windows Live ID have not used for some time and I want to start using it again, live ID is always committed but I don't remember the password and I can't use the reset password option because I don't know that it is marked and "inactive".  Please let me know promptly if you are able to reactivate my live ID.  Once you answer this, I will use the live id address.  Thank you in advance.

  original title: can reactivate you my windows Live ID?

  Hello, I have my ID Windows Live ID have not used for some time and I want to start using it again, live ID is always committed but I don't remember the password and I can't use the reset password option because I don't know that it is marked and "inactive".  Please let me know promptly if you are able to reactivate my live ID.  Once you answer this, I will use the live id address.  Thank you in advance.

  It is a peer-to-peer (user forum.  You don't talk to Microsoft directly.  The answerto your question is, "No."

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

• Export a PDF file from a servlet ATG: IllegalStateException: response already committed

  Question of high level

  "When a servlet in my servlet pipeline ATG wrote a PDF document to the HTTP response output stream, well that the PDF file is delivered to the browser of the client user successfully, an error is recorded on the server: Servlet failed with Exception java.lang.IllegalStateException: response already committed."  Why does this happen?

  Details

  My ATG 10.1.2 application needs to be able to generate and return a PDF document to the client browser when the user clicks on a particular button on the site.

  Although I don't know if it is a best practice of the ATG, the approach that I landed on this is to insert a new custom servlet, 'PdfExportServlet', in the pipeline of servlet ATG.  The PdfExportServlet, for the applications it considers PDF application and decides to manage, generates the PDF content (using Jasper reports engine) and writes the PDF content to the HTTP response output stream.  Here's the relevant part of the code:

  response.setContentType("application/pdf");

  // (... The code that generates a JasperPrint object with the PDF content...)

  final byte [] pdfBinaryContent = JasperExportManager.exportReportToPdf (jasperPrint);

  response.setContentLength (pdfBinaryContent.length);

  final ServletOutputStream outputStream = response.getOutputStream ();

  outputStream.write (pdfBinaryContent);

  outputStream.flush ();

  outputStream.close ();

  It works very well, and the PDF file is displayed in the client browser.  However, a mistake is also recorded in the log file of the application on the server:

  [< WL-101020 > < [path of the module: shop ServletContext@1369332778[app:storeFront: / shop spec-version: 2.5]] Servlet failed with Exception

  java.lang.IllegalStateException: response already committed

  at weblogic.servlet.internal.ServletResponseImpl.objectIfCommitted(ServletResponseImpl.java:1631)

  at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:637)

  at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:602)

  at weblogic.servlet.FileServlet.findSource(FileServlet.java:269)

  at weblogic.servlet.FileServlet.doGetHeadPost(FileServlet.java:191)

  at weblogic.servlet.FileServlet.service(FileServlet.java:173)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)

  at atg.servlet.GenericFilterService.doFilterChain(GenericFilterService.java:621)

  ....

  One frustrating thing about this error that had made it difficult to solve, is that it does not occur on my PC; local development this log message appears only when the application is running on one of our servers of pre-production or production.  This made try scan multiple possible solutions that are problematic, because every change to the code requires a fresh deployment to our shared, pre-production server which takes time.

  I tried the following variations on the above code, or resulting in a change in the manifestation of the question (the error message that appears in the log):

  1. After the call to outputStream.close (), on the theory that it may help prevent the servlets downstream demand has already been posted, and no other attempts to modify and validate the request should be made added a call to response.flushBuffer ().
  2. Removed calls to outputStream.flush () and outputStream.close (), on the theory that some members of servlet (TailPipelineServlet?) downstream pipeline may be responsible for closing the outputStream, and try to do it prematurely was responsible for the mistake.

  I also have so far have not found anything relevant in the documentation of the ATG/Oracle may provide a clue as to what is happening here, or what general best practices about having a custom servlet in the ATG pipeline that generates output to outputStream of the answer.

  All the tips about the cause of this error, or what needs to be done to resolve this would be welcome!

  Thank you

  -Jon

  I figured out the call to outputStream.write () is originally the HttpServletResponse to commit, because the size of the buffer of the ServletResponse is less than the size of my PDF data Byte.  Reference: ServletResponse (Java EE 6)

  However, when I let my servlet to return with the HttpServletResponse in a State that is not validated, the client browser gets served a 404 instead of the PDF data.  I am currently looking into this issue.

• Iterator is refreshed before committing.

  Hello
  
  Scenario:
  
  The user loads the first page. He can see his profile details. He clicks on a link change; It opens a popup to change the details with a backup and the Cancel button. Changes that he the his name and click Cancel. The Cancel button closes just the edit popup.
  
  Problem:
  
  He will see his name published on the front page. Only if he commits his edition name should appear at the top of page. His past because the same links used in the first page and the editable page. I tried to give pageDef CacheResults = "false".
  
  < iterator lie = "AdminVO1" RangeSize = '25' DataControl = "AppModuleDataControl."
  ID = "AdminVO1Iterator" CacheResults = "false" / >
  
  But it's not working. Please help me in this issue

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/06-cancelform-Java-169125.PDF

• Commits in 10g

  Hi all
  
  I'm in oracle 10 g 2.
  
  I have a process that has instructions Delete and Update... followed in other calculations.
  
  I have explicit is committed between most of the DML... but still the results are not compatible...
  
  This explicit validation is sufficient enough... ot should I go with immediate writing validation...
  
  
  What is the difference between them and when it is mandatory to use commit is write the immediate Option?
  
  Thanks in advance
  NU

  Your data are inconsistent, because you issue commit after each DML. So what you have to do is identify your transaction and perform your validation.

  Do not commit after each DML. Engage only when required.

• Appeal iPhone issues 7 more

  I recently bought the new iPhone 7 more.  Not only am I having problems with the LTE service, bounce back between 3 G and no service I am now having problems with call connectivity.  When you try to make an outgoing call, I get an automatic response from my carrier (Verizon) "it's Verizon, we are unable to complete your call at this time, please turn off your phone and back and try again."

  It is a known issue with the iPhone 7 and Verizon. Supposed to be Apple and Verizon are seeking him. It has been a problem since the phone was released. Do a Google search or search here on the forums for a temporary solution but not a cure.  But basically to stop the LTE oice and data into data only in the settings.

• iPhone 6 more hang freeze issues

  My iPhone 6 more guard suspended (gel) for the past 6 months, I have to reset the whole phone sometimes up to 2 times just to get it to work again. Been a loyal (including my entire family) custome since gen 1 iPhone, iPad, mac book. Am really disappointed with the quality now. Did not bring to the service center since the first day of the problem because I thought that was just a few bugs & was sure that apple will fix it, but after many update of iOS so far, the pesisit still problem.

  iPhone is more quality I've known, hope apple can fix this problem before finally losing the most loyal customers

  Hello BennyFoo,

  Thank you for bringing your iPhone freeze questions here for Apple Support communities. I understand how it is important to have a reliable phone. I'm happy to check this with you.

  The first thing we want to make sure that all of your data on your device is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try to turn off your device, then again on the March. Sometimes, that's all that is needed for connections reset and everything working properly again. This article help from Apple will help you to do: restart your iPad, iPhone or iPod touch. If you are still having issues, try force reset then. It is designed to be used when the iPhone does not respond, and it looks to be the exact symptoms that you are experiencing right now.

  If you still experience the same problems after reboot, please try to restore your device from a backup by using this article help: restore your iPhone, iPad or iPod touch from a backup. If you don't have a current backup, please try this help article: If you can not update or restore your iPhone, iPad, or iPod touch. Please pay close attention when you get to step 4 who said "when you see the option restore or put to update, choose update. iTunes will try to reinstall iOS without erasing your data. "to get your iOS reinstalled. Test if the issue is still ongoing.

  Thanks again and have a great rest of your day.

• Pages on issues of formatting to iCloud

  Hey everybody,

  I created a document Pages using the Pages application on my macbook pro I downloaded then to iCloud Pages so that I can access it from any computer. The issue I'm having is that I formatted some of the text to have a black background and the text to yellow color. For the life of me I can't understand how to change the background color of text on the Pages of iCloud. I beginning to think that changing the background color of text just is not possible on the platform of iCloud, but wanted to put this out there just to make sure.

  I appreciate any help or clarification on this issue.

  Thank you!

  Background (highlight) text color controls are absent in the Pages for iCloud, because it is a subset of Pages for Mac.

  This has been discussed in a previous post here, not so long ago.

• External hard drive mounting issues on MacOS Sierra

  After upgrading to OS Sierra, I found that my USB3 drives, directly connected to my iMac end of 2012, turn off at startup. USB 2 disks are unaffected and connect properly. The only way to access my USB3 disks is to disconnect and reconnect every time I start the computer, then they are ok. I tried to reset the NVRAM, but it did not work. I found Os El Capitan until this issue is resolved.

  Do not mount or actually turns out always the system start? It was not clear in your subject line and content later, what was going on.

  Are they NTFS formatted drives? See the solutions frequently asked and answered forum if they are.

• TVos 10 - Apple TV 4 (Wifi issues)

  My apple TV was working until it was upgraded to the new update 10 TVos great. I reset my router and modem, reset the apple tv itself and it has restarted several times, all with the same mistake of not being able to connect to the wifi network. My iPhone and computer are connected properly, get about 40mbps is normal, and the router is in the same room. Everyone knows these issues? No luck, anyone know a fix?

  have you tried to restore the appletv? Restore your Apple TV via iTunes - Apple Support

• I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• connectivity issues mobile iPhone 7

  I have a new iPhone 7 jet black, so far I'm in love. But yesterday, I noticed an annoying problem. The phone loses the network connection (cell to the & t) and he no reconnect, it will remain just it saying no service. I have to go in airplane mode and outside to force it to look for the network connection.

  everyone knows this? and everybody understand what it could be?

  I already missed messages and a phone call. This could worsen as boring to become a problem. If anyone has any idea what this could be please give me a heads up!

  OH! Another thing I noticed, when the iPhone is connected my signal strength went from-102 to my 6 sec to-86 on my 7! Then when I am connected I am connected!

  Hello jpgraphx,

  Thank you for using communities Support from Apple. I know have a cell connection issue on your new iPhone, it's not what you expect. The good news are the following steps will help to solve your problem with loss of cellular data and see no Service and get your new iPhone works properly again.

  If you cannot connect to a cellular network or cellular data

  See you soon!

• Backup issues after upgrade to iOS10

  Dear users of Apple,

  I updated my iphone 6 more yesterday with iOS 10. Phone works quite well. But I have my phone backup problems. I usually back up my phone with my iTunes Macbook (Via cable and sometimes on wifi). But after the update to iOS 10 it seems that I can't back up my phone more. I don't know the real cause of this problem.

  1. I am not able to save my iPhone via wifi data in iTunes. (Previously it was not the case).

  2. I tried to back up my phone using the cable also. Also, I pressed "Trust" this computer, but I get this error message. Please see below.

  Also, I allowed my computer by disconnecting iTunes and logging back there. And yet I have the same issues.

  "iTunes could not connect to the iPhone because an invalid response was received from the device."

  Does anyone know what this answer is invalid can be?

  Do I have to change the settings in my phone or iTunes?

  Help please!

  Thank you very much

  Deven

  Did install you the latest iTunes? iOS 10 requires iTunes 12.5.1.

  Get the latest version of iTunes - Apple Support