Expansion of the files is at 27% and then my screen turns off? : s

Similar Questions

• Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Have already tried to contact Adobe and they told me to reinstall the program. I did this and the same issue. It's crazy. I can not turn off something that I did not more...

  Thank you.

  No - I had, of course, tried all these things. Finally, I had someone (after several days) on the personal chat group that could fix and it did it in a few minutes. Too bad that nobody else seemed to be able to do. Adobe is very soft.

  I can't thank enough the other person - it was amazing.

• 2 errors cannot start the file missing PSHED.dll and a blue screen error 0x0000C1F5

  Hello

  A few moments ago I had to do a restore of the system for some reason forgotten but restoring interrupted when the power off when I tried to restart it gave me a chioce of such boot options that start normally start SafeMode etc... but when I choose one of them it is said that the PSHED.dll file is missing or currput so I put in my drive repair/install and reboot, but after the white bar has loaded and the green bar loads, it gives me a blue screen error with the info tech being 0x0000C1F5 and the rest are zero

  I have a gateway with windows Home premium 32-bit model and more recent material I instaled a grapics card xfx 9800gt nvidia and a new mouse, any help would be appreciated thanks

  -Renton

  Hello

  This error is somehow a special case:

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
  http://support.Microsoft.com/kb/970101/en-us

  Stop error when you start a Windows Vista-based computer, even though hotfix 946084 is installed on
  computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/958069/en-us

  Other methods:

  Workaround for STOP 0x0000C1F5 / 0xC1F5 / C1F5 / BSOD / CLFS. SYS / KB946084
  http://www.delmartian.com/nullpointers/workaround-for-stop-0x0000C1F5-0xC1F5-C1F5-BSOD-CLFS.sys-KB946084.html

  Easier to read same message
  http://BSODs.com/content/Windows-Vista-and-stop-0x0000C1F5-Linux-anyone

  SystemRescueCd
  http://SysRescCd.org/Main_Page

  Video fix
  http://www.YouTube.com/watch?v=Y_OjCkbZyTw

  Video Fix - Linux
  http://www.YouTube.com/watch?v=SwSvIhyZRVc

  ================================================

  For the most part, the BlueScreens (the above is a special case as noted)

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• New installation fails during the expansion of the files Windows 7 Pro

  Recently, I built a new computer after my old man died. I installed Windows 7 Pro, I had on the old system. Everything worked well for about a month. Then I started having various errors, some suggesting a memory error. I ran several times using the most comprehensive parameters of memtest and no problem not found. Further inspection, I discovered that a critical system update was applied just before that the problems started. I decided to roll back the change. It does not solve the problem. I tried to do a system repair. That did not work. She only had basic as IE11 and Skype applications. I had also installed the utilities for the motherboard and graphics card. So, I decided to do a clean install. Each time, it fails during the expansion of the files. The error message is, "Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070570." He gets up to 30% each time. I tried to install for a V300 Kingston SSD (120GB). I also tried another SATA II HDD (750 GB) with the same problems. I downloaded a new ISO and tried to install from that. Yet once, it is not at the same point. I noticed that whenever it creates a partition system reserved 100 MB which is almost full. At one point, I got a message saying that there are about 8 000 MB of free space. (I think that was all trying to manually unzip the files by a tip I found online). I found several suggestions for similar problems, but the solutions proposed did not help. I'm sure it will be a simple solution, but I'm out of ideas. Any help would be appreciated.

  Motherboard: MSI MPower Max
  CPU: Intel i7 - 4770 K 3.5 GHz (not overclocked)
  RAM: Crucial Ballistix Sport 16G (2x8G) DDR3 - 1600 MHz
  SSD: Kingston SSDNow V300 Series 120 GB (no special driver needed)
  HARD drive: Seagate 750 G 7200 RPM SATA II
  Video: EVGA GeForce GT 2 640 GB
  Case: Corsair 400R
  Power supply: Corsair TX650M
  CPU cooler: H80i
  DVD: HP, BluRay BD R/W drive
  OS: Windows 7 Professional 64-bit upgrade (the old computer was an XP update)
  CPU Temp is around 42 C.

  If Memtest86 fails then you need to get into the BIOS and set the RAM timing.  Memtest86 + displays the calendar then use the value displayed and compare to the real specs for your memory.  Also, you may need to increase the voltage to the RAM (in BIOS) place a small amount.

  As regards the function of Intel EIST, let her enabled for now. Then enable it after installing Windows successfully.

  =============================================================

  It's the set of test utilities that I use on every new system that I'm building.

  Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of HDD sank medium over the past 18 months.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  ============================ SSD Test Software =============================

  Intel® drive SSD Toolbox
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Life of the SSD: http://ssd-life.com/

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  = Once Windows installed =.

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
  Check their support site for the latest drivers as the CD that came with the computer
  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:
  Download and install the most recent Windows 7 or 8 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 8 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU-ID (CPUZ): http://www.cpuid.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
  and the "SPD" tab shows the nominal speeds for each memory location that is filled.
  #2 Note:
  COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  CrystalDiskInfo:
  http://CrystalMark.info/software/index-e.html
  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
  Monitoring the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• I am trying to record an mp3 file, but firefox does not allow me to save... it allows me to read the file but not download and asave to my computer. How can I enable to save the mp3 files on my computer?

  I am trying to record an mp3 file, but firefox does not allow me to save... it allows me to read the file but not download and asave to my computer. How can I activate the Firefox save MP3s on my computer?

  Go to Options > Applications tab > MPEG Layer 3 audio(audio/mpeg) image search > use the "Save file" option on the menu drop down.

• Why can't get a Blackboard web site file to download on my computer, when I try told me that the file cannot be downloaded and gives a box that asks to restart, or cancel

  Download file will not be

  Why can't get a Blackboard web site file to download on my computer, when I try told me that the file cannot be downloaded and gives a box that asks to restart, or cancel

  Hello

  1. what operating system is installed on your computer?

  2. which web browser you are using?

  3. you get any error message?

  4. are you able to download the file using any other computer?

  5. do this happen all sites or with any specific Web site?

  6. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps below.

  Step 1:

  a. click the Start button.

  b. in the start search box, type %temp% , and then on enter.

  c. delete all files in the Temp folder.

  Step 2:

  a. press the Windows key + R

  b. in the run, prefetch, type dialog box press ENTER.

  c. remove all files

  Method 2:

  If you are using Internet Explorer, try in no add-on mode.

  a. click the Start button.

  b. click on all programs.

  c. click on Accessories.

  d. click on System Tools.

  e. click on Internet Explorer (No Add-ons).

  Method 3:

  Optimize Internet Explorer from the link below.

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/936213/ro

• It is safe to delete the files in blue text and a sign $?

  It is safe to delete the files in blue text and a sign $?

  If you mean files with names like $NTUninstallKBxxxxxxx$, see http://windowsxp.mvps.org/Hotfix_backup.htm

• The file contained a virus and was deleted

  Hello

  I get the message

  the file contained a virus and was deleted

  This occurs in Internet Explorer, chrome, and Firefox (in Firefox I fixed it by going to about: Config), it started with the virus antivirus system care, which I removed, I did tests, which does not.

  Disable the warning?

  Thank you

  I did all the steps in this entire thread and no solution (good ideas, but no solution). I believe that this error message "the file contains a virus' on all downloads came from a virus on a web page (this is what I saw in my case).  When IE downloads a file, it shows he has a virus, but it's really not analyzed.  I got this message even after I've completely removed McAfee and after I reinstalled completely IE10.  It's a redirect using the points of analysis that the virus must have created.    To resolve this problem, I went to C:\ and made a random generator DIR command  He showed c:\program files\windows defender had these reparse points.  When I looked for download the latest Windows Defender, says MSFT site is no longer used on Windows 7 64 bit so I deleted the subdirectory 'C:\program files\Windows Defender' and all of its subfolders and restarted.  Problem disappeared.  McAfee and MSFT Security Essentials scans do not have that automatically remove.  Hope that helps.

• Windows movie maker error - the file is not indexed and cannot be imported

  I have converted a quicktime in WMW clip, but when I try and import the video in windows movie maker, that it comes up with error the file is not indexed and cannot be imported? What does that mean?

  Try another converter.

  There are to many converters available on the net...
  the following links are some examples.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (6) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

• copy of the files on a DVD and share it with other computers

  I "sent" file of my blank DVD. I chose "mastered" to achieve a closed DVD. I then answer 'Yes' to create another disk? Which failed. I tried to put my first drive back in test it. Instead of going on the DVD, he went to a folder on my C: drive and gave a message of "ready to burn files to disc" message. I opened the DVD in Windows Explorer, and of course, he directed me to a folder on my C: drive. ALL I WANT TO DO IS COPY FILES TO A DVD. I have NOTHING else to this function in Windows. I want to be able to write files to a disc and then PLAY these files successfully, later.

  Here are the instructions on how to burn files to a CD/DVD in Vista: http://maximumpcguides.com/windows-vista/burn-a-cd-or-dvd-in-windows-vista/.

  Here is another a bit fuller article on the same topic: http://www.ehow.com/how_5013668_copy-cd-dvd-windows-vista.html.

  Read both of these articles - maybe you will discover a step that you have ignored or something.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• DVD how much we need for the files backup with backup and restore program?

  Hello how are you?
  DVD how much we need for the files backup with backup and restore program? Y at - it large differences in the time and space between write backups on DVD and external hard drive?

  I do not understand your question.  Asked how the space has been used on your C: drive and you answered 60 GB.  Now you say your PARTITION C: is 60 GB with only 20 GB used?  I really don't understand what you're so confused.  It's simple arithmetic grade 3rd.  What is space you USED on the C: drive, that multiply by 0.7 to obtain the amount of space will be used on your backup disk after compression.  Divide this number by 4.7 and round.  That's how many DVDs you'll need if you insist on the use of DVDs for backup.  Then

  (1) If you are using 60 GB, the answer is (60 x.7) / 4.7 = 8.936.  I rounded up to 9 and added 1 just to be sure.

  (2) If you use only 20 GB, the answer is (20 x.7) / 4.7 = 2.97 rounded up to 3.  Add 1 and get 4.

  If you use only 20 GB, I am very surprised, because almost any important installation of Windows 7 is going to take more than 20 GB.

  All of this assumes that you do NOT use the Windows backup and restore program, but one that I recommended.  When I used the windows one, the results were several times the space that I used on my C: partition.

  Good luck.

• Before the last update of the PS I could open the bridge by going to the file menu in PS and by clicking Browse in Bridge. After the recent update, that no longer works. Now I have to open the bridge first, then PS Ce that has changed?

  Before the recent update in Photoshop, I could open by going to the file menu in PS and bridge by clicking Browse in Bridge. After the update that no longer works. Now I first have to open the bridge and then PS Ce that has changed?

  Other than a reset of Photoshop preferences,

  You can start a conversation with the customer service.  Contact the customer service They can remote access to your PC if necessary.

• Open the files in several folders and run

  Hello guys,.

  I have several files in several folders, I would like to know is it possible to automatically open the files in folders and execute action defined in PS.

  Example: I 1-folders12 (folder name will change regularly), I have 5 files in folder 1, 10 in folder2 and 7 in folder3,... and so on.

  I need a script to open the files one by one and perform the action to the PS and nearby, once all the files are processed in the Folder1, the script should search for folder2 and until the last folder. Is this possible? looking for consultant.

  

  This should be possible with just using Image Processor, which comes with the PS. Just check the box that says to all subfolders.

• When I opened my project and it is unable to locate the files. I find the files that are 'missing' and open the project.

  Hi im quite new for first pro and I'm having a problem when I opened my project and it is unable to locate the files. I find the files that are 'missing' and open the project. Everytime I open the project everything I see is all that media have these red, pink, blue, green, yellow lines, where pictures should be. And there is also the title of my pictures in the upper left corner. No one knows what it is and how I could fix this?

  [title published by mod]

  [Please do not double post, deleted the other]

  Right-click on the images in the project window: recharge or replace it.

• Steps: we received the file in PDF format and has been invited to modify the form.

  Steps: we received the file in PDF format and has been invited to modify the form.

  
  

  My colleague edited in Livecycle es4.

  
  

  When we sent the document to them, they asked to have the title marked as H1, as it is currently labeled as content.

  
  

  In live cycle, unknowledgable about how we change it.

  
  

  We then took the file is saved as a word document in their exported to PDF via adobe DC

  
  

  my changes and referred.

  
  

  Once they have received the file they are unable to put anything (all data in the document where it will also prompt) using the player

  
  
  

  We are not writing this on the central computer, but that's what we have...

  
  
  

  Acrobat reader ix 11.0

  
  

  Adobe live cycle ss4 11.0

  
  
  

  Thank you...

  It is urgent need please reply as soon as possible

  Hi barbarac80529448,

  Please see this KB doc. helps LiveCycle | Working with the forms, it might help you in the installation of PDF form in Adobe LiveCycle.

  Kind regards

  Nicos