Como can present LUN is a a physical server

Similar Questions

• ESXi 4.0 Update 2 guests can present a purple screen after vCenter Server is upgraded to 5.0

  The KB article http://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & externalId = 2007269 said that with the 4.1 update 2, you will discover a purple screen after the upgrade of the server vCenter.

  Does anyone know if all 4.1 < U3 are also affected?  What about 4.0?  I need to know if I should plan a lot of upgrades to the host before our upgrade to vCenter.

  Thank you!

  from my understanding, it's just bound to 4.0U2, however, you can provide feedback to the KB article.

• Several Presentation Server on a physical server

  Hi all
  
  I read in a few places that you can run several servers of presentation on the same physical server, with each of them having their own RPD, web catalog etc..
  
  Someone there experience this and if so, is it easy to install? I will do this on a Redhat Linux Server BI 10.1.3 Server
  
  Thanks in advance for your advice/comments

  Hello
  Follow these links it will be useful for you

  (1) http://download.oracle.com/docs/cd/E12096_01/books/AnyInConfig/AnyInConfigSAW.html

  (2) http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-2-presentation-services/

  (3) http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-1-the-bi-server/

  Thank you
  Angelique

• How can I check the disc for physical integrity on Satellite P305?

  I have P305-S8838.

  I had some freezing problems earlier this month, and on the notice here, I nu start-up and reduced services a little at a time.
  Now, I have a few more crash but don't know if it's a physical disk problem.

  For example... I have run CHKDSK and does many things and happens at the exact same spot and hangs at step 4 file 5 3498 or 421168 processed.

  I tried to run CHKDSK in SafeMode but tells me drive is locked and it will run when I restart. But the restart put back me in normal mode and get the same hang.

  Now, for more suspicion of a physical problem. I tried to make a disk image with ACronis and same problem occurs because he says impossible to reading data 226 964, 072 sector and ask if I want to ignore and continue. I say yes to everything. Log shows he made about three of these attempts and crashes.

  I ran sfc/scannow and it says found problems that he was unable to fix. The newspaper isn't so long and complex course that all means. I could send these log files if someone can help me understand.

  I ran the test of memory OK.

  I if I could put in DVD Toshiba and certain diagnoses, but when I put in the disk I get this big warning I'll crush, etc and I have chicken.

  This didn't stop me to use the computer, but its all irritating.

  How can I check the disc for physical integrity?

  Bob

  Hello

  He idea goo to check the HARD disk and run some diagnostic procedures.
  For this, I recommend the freeware tool called Drive Fitness Test.
  It allows you to check the HARD disk for certain physical defects.

  Google for this tool. You can get it from multiple pages download

• V.11 ColdFusion Standard can be installed and executed on a Windows virtual server, or must it be installed on a physical server?

  V.11 ColdFusion Standard can be installed and executed on a Windows virtual server, or must it be installed on a physical server?

  It can be installed on physical servers and virtual machines. He political license would be different for the physical server and a virtual machine.

• What to do when the physical server fails?

  We have VI3 Foundation edition (no VMotion) with three blades servers configured as host servers. Each host has so far about 5 VMs. All showed up at a SAN iSCSI with each host stressed it's own logic on the SAN unit number.

  I was wondering what to do, if anything, to prepare for a physical to die servers. Since we are on the shared storage, we would still be able to see the dead guests vmdk VM and other files, correct? Or the separate LUN will avoid this? Now we see them through the VMware Infrastructure Client but dead servers VMs will always show upward after that he died?

  If you can see the vmdk files and other files of the virtual machine, we can re - create a virtual machine of those afterwards or is there something we need to do now before the failure of a server?

  Thank you.

  If that fails, you can present the LUNS to a different host and

  register these virtual machines on this host (from cli or Datastore browser). Then start the machines virtual and if all goes well they all come back to the top. It would be a

  bit more complicated, but that's all.

• Conversion of physical server into a virtual machine

  Hello

  I would like to take a physical server and convert it to a virtual machine on the same box.  I'm new to VMs, so please tell me if this is possible and if yes, what is the best way to do it. Right now, I think these are the basic steps:

  (1) take operating system image current (2003 Server STD) using Acronis.

  (2) wipe server and install ESXi 4.

  (3) use the free VMware Converter to convert the Acronis image to a guest VM on the ESXi host.

  Will this work? Am I missing something? The traps that I should look out for?

  A few questions more to go with this:

  -J' currently have an ESXi 3.5 on a desktop host. Wouldn't be better to convert this machine on the fly to a guest on this 3.5 host, then move the guest to the new 4.0 host once it is ready?

  -This server is now an application server and has a few databases, such as WSUS and Kaspersky Administration kit and maybe something else I can't think right now. Is that causing trouble with the DBs in the transition from the physical to the virtual?

  -The machine has also acts as a file server and is connected to our iSCSI SAN. Will be a problem or I would be able to remap the LUN to the virtual machine quite easily just like I did to the physical machine?

  Sorry for the long post. Any help would be greatly appreciated. Thank you!

  As long as you can take decisions associated with the image with Acronis and then convert it to a virtual machine, I think this is a good approach.  You can convert the server in a virtual machine running on your ESXi 3.5 environment but I would not run a server database production on class workstation hardware.  The performance would be probably pretty bad if you had a large number of users hitting that database.  As for using Acronis I know that it is supported but in the past I have never tried to convert an Acronis image for a virtual computer by using converter.

  The databases themselves should not have any problem on a virtual machine.  SQL runs in a virtual machine and saw complex databases even accomplish a lot.

  Reconnect to your iSCSI SAN shouldn't be a problem either.  You must ensure that the networking on the newly built 4 ESX host is configured to allow you access to all the VLANS required (iSCSI VLANS, server VLAN, etc.).  It is an important step to ensure that you have right or you will not be able to reinstall your iSCSI LUNS, once the server is converted.  Once the networking is configured the process of reconnecting to the iSCSI LUN from inside your virtual machine is the same as if it was physical.

  Good luck!

• Migrate CUCM, CUP and CUC VMS from the physical server Dell to a UCS

  Hi all

  We have 3 virtual machines from one physical server to Dell, we want to migrate those virtual machines from a server of the UCS.

  Reference Dell physical server:

  Model: PowerEdge M610

  UCS: Version of UCS B200 M4 3.0 (2 c)

  I was wondering if just copy all the files of the virtual machine to another server or there is another procedure to do this... and also we need new licenses of vmware?

  Thank you very much!!

  Kind regards!

  ESXi licenses is up to you, you might have bought it so that the UCS, or buy directly from VMWare, but you need to license.

  As for traffic, if you have vCenter, you can move the virtual machines using it (vMotion and/or Storage vMotion), or if not, you can perform a cold migration.

• GoldenGate replication on the same physical server - REPLICATE always ABENDING

  Dear expert GG,

  I'm completely green with Golden Gate, so I would like to help on why my REPLICAT process abends right after that I put my source database object lines.  I'm following the writeup of Gavin Soorma -.

  http://gavinsoorma.com/2011/08/GoldenGate-replication-with-source-and-target-on-the-same-physical-host/

  I'm trying to implement CDC on the same physical server.  I have a 11g source database that uses ASM and my target is the database 10g that is using traditional file system management.  I am trying to map an object, ggs_owner.myobjects that I created in the two databases.  EXTRACT both REPLICAT start very well, but as soon as I perform an insert in the 11g database and post the lines, my REPLICAT process abends.

  Version information:

  Oracle GoldenGate for Oracle shell
  OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230_FBO version 11.2.1.0.1
  Linux, x 86, 32-bit (optimized), Oracle 11 g on April 23, 2012 08:09:25

  Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.

  GGSCI (localhost) 3 > DBLOGIN Userid ggs_owner@ora11g, password ggs_owner
  Connected to the database.

  GGSCI (localhost) 4 > RELEASES
  Operating system:
  Linux
  Version #1 SMP kills Jan 4 15:24:05 EDT 2011 version 2.6.18 - 238.el5
  Node: localhost.localdomain
  Machine: i686

  Database:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE 11.2.0.1.0 Production
  AMT for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production

  GGSCI (localhost) 7 > DBLOGIN Userid ggs_owner@ora10g, password ggs_owner
  Connected to the database.

  GGSCI (localhost) 8 > VERSIONS
  Operating system:
  Linux
  Version #1 SMP kills Jan 4 15:24:05 EDT 2011 version 2.6.18 - 238.el5
  Node: localhost.localdomain
  Machine: i686

  Database:
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
  PL/SQL Release 10.2.0.1.0 - Production
  CORE 10.2.0.1.0 Production
  AMT for Linux: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production

  PRM file content

  EXTRACT the content of the Param file

  extract extlocal
  SetEnv (ORACLE_HOME="/u01/app/oracle/product/11.2.0/dbhome_1')
  SetEnv (ORACLE_SID = 'ora11g')
  ggs_owner username, password ggs_owner
  localhost.localdomain, mgrport 7809 rmthost
  rmttrail ./dirdat/aa
  TRANLOGOPTIONS ASMUSER sys@+ASM, oracle ASMPASSWORD
  table ggs_owner.myobjects.

  Content of the file param REPLICAT

  REPLICAT replocal
  SETENV (ORACLE_HOME="/opt/oracle/product/10.2.0.1')
  SETENV (ORACLE_SID = "ora10g")
  ASSUMETARGETDEFS
  Ggs_owner username, PASSWORD ggs_owner
  DISCARDFILE. / dirrpt/discard.txt, APPEND, 20 MEGABYTES
  CARD ggs_owner.myobjects, ggs_owner.myobjects, KEYCOLS (object_id) TARGET;

  Complete the following steps in GGSCI:

  GGSCI (localhost) 103 > add extract extlocal tranlog start now
  Added EXTRACT.

  
  GGSCI (localhost) 104 > add rmttrail ./dirdat/aa gets extlocal
  Added RMTTRAIL.

  
  GGSCI (localhost) 105 > dblogin Userid ggs_owner@ora10g, password ggs_owner
  Connected to the database.

  GGSCI (localhost) 106 > add replicat replocal exttrail ./dirdat/aa
  ERROR: No control points table specified to add REPLICAT.

  
  GGSCI (localhost) 107 > add replicat exttrail ./dirdat/aa NODBCHECKPOINT replocal
  REPLICAT added.

  
  GGSCI (localhost) 108 > dblogin Userid ggs_owner@ora11g, password ggs_owner
  Connected to the database.

  GGSCI (localhost) 109 > start extract extlocal

  Sending START request manager of...
  EXTLOCAL EXTRACT from

  
  GGSCI (localhost) 110 > news

  Program status group Lag time since Chkpt Chkpt

  MANAGER RUNNING
  EXCERPT FROM RUNNING EXTLOCAL 00:00:00 00:00:02
  REPLICAT ORDER REPLOCAL 00:00:00 00:01:27

  
  GGSCI (localhost) 111 > start replicat replocal

  Sending START request manager of...
  REPLICAT REPLOCAL from

  
  GGSCI (localhost) 112 > news

  Program status group Lag time since Chkpt Chkpt

  MANAGER RUNNING
  EXCERPT FROM RUNNING EXTLOCAL 00:00:00 00:00:09
  REPLICAT RUNNING REPLOCAL 00:00:00 00:00:04

  In another window, I do the following:

  SQL > connect ggs_owner@ora11g
  Enter the password:
  Connected.
  SQL > select count (*) from myobjects;

  COUNT (*)
  ----------
  71932

  SQL > truncate table myobjects;

  Table truncated.

  SQL > insert into select MYOBJECTS * from DBA_OBJECTS;

  71932 lines were created.

  SQL > commit;

  Validation complete.

  When I return to GGSCI, I see that the process has added:

  GGSCI (localhost) 132 > news

  Program status group Lag time since Chkpt Chkpt

  MANAGER RUNNING

  EXCERPT FROM RUNNING EXTLOCAL 00:00:00 00:00:07

  REPLICAT REPLOCAL ABENDED 00:00:00 00:00:02

  When I can look at, or what can I add to the param REPLICAT file that might help identify the root cause.

  Any help would be appreciated.

  Thank you

  Prom

  Hello

  Since no one has replied, I can go with my assumptions that replicat process searches across data dictionary, and since he is a 11g Golden Gate executable, its not backward compatible with 10g.  To this end, I have duplicated my database with RMAN DUPLICATE ora11g, creating another database called ora11g2, changed my REPLOCAL. PRM file as follows (changes in bold):

  REPLICAT replocal
  SETENV (ORACLE_HOME = "/u01/app/oracle/product/11.2.0/dbhome_1")
  SETENV (ORACLE_SID = "ora11g2")
  ASSUMETARGETDEFS
  Ggs_owner @ora11g2, ggs_owner PASSWORD username
  DISCARDFILE. / dirrpt/discard.txt, APPEND, 20 MEGABYTES
  DDL INCLUDE ALL
  CARD ggs_owner.golden, TARGET ggs_owner.golden, KEYCOLS (gold);

  I then rebooted the components again, and finally, I was able to replicate the changes to the GGS_OWNER table. GOLD ora11g, at the same table in ora11g2.

  Thank you all.

  Prom

• vCenter Appliance physical server, 3 guests, small environment size

  Hi all.

  I'm trying to move a vCenter device to a physical server.  This is a small facility with only 3 guests.  I'm a bit new to VMware.  If I put in place, single sign - on again and add the hosts once again, this isn't a problem.  I did not put groups in place and yet it is a new installation. In fact, there is a cluster but DRS and HA is lit.  I want to remove the cluster but not the hosts.  We have a small Windows 2008 R2 AD domain.  The vCenter Server is member of the domain, as are ESXi hosts.  This is version 5.5.

  Is it OK if I simply remove the vCenter device by stopping and removing disk and inventory, then install the physical server and add hosts, delete the server appliance of AD and add the new physical server to AD and set up SSO again on the new server - that will work?  Did I meet problems questions?

  I would point out that the reason behind my fact that must implement vSA on the 3 hosts, and from what I read, I can't launch the vCenter on a VSA host device, and 3 guests must be guests of VSA if each should share its space with the other 2. I also read that I can't add VMS to guests until the VSA cluster has been created.  So I need to ditch the current cluster and take the guests out of it.  That a host is always under the existing cluster.  I'm hoping that by performing these steps above that I can add my hosts to the new server physical vCenter once it's running and just delete the old a.  If this is not the way forward on this issue, if you please point me in the right direction and you will be worth your weight in gold as far as I'm concerned.

  Thank you very much in advance,

  Sam

  Just a quick note on the ASB. You can read the new features of vSphere Storage Appliance version 5.1, which explains the added features, including a brownfield facility.

  André

• How to virtualize a physical server

  Hi all

  im just wondering a little the steps involved in virtualize a physical server. (I have an esxi in place). So basically I have a server on the network physically and I would run some test on it (but want to be sure where im planing to virtualize physical and run the test on the virtual server).

  My question is

  1. how to start virtualization... I use Vconverter then bind to Esxi?

  2. after virtualization, since the physical and virtual server will have the same host name - it will be right conflicts?

  3 should I remove the physical network? -If Yes... DNS pick will see the virtual as physical?

  Thanks a lot guys

  You can find all documents related to vSphere here

  http://www.VMware.com/support/pubs/vSphere-ESXi-vCenter-Server-pubs.html

  See Add a Virtual Machine port group

  Check if the videos here help http://vmwarelearning.com/

• Migrate from virtual vCenter5.0 of physical server

  Hi guys,.

  I'm in the process of upgrading my vSphere5.0 to 5.1, but before that I want to migrate my vCenter5.0 (VM on the cluster to vSphere5) to the physical server. I know there is no direct upgrade from the virtual to the physical server, so I have to migrate virtual and physical memory with same version 5 and then pass vCenter5.0 to 5.1 on the physical server. Please help with the steps and questions below:

  1. build the server target with the same operating system (win2008r2 std x 64, partition of 2 x 1 for OS and 1 for the vCenter database)

  2. stop services vCenter vCenter backup config using the data migration tool (vCenter5.0). Backup DMT include the ADAM database as well? If this is not what is the best way to migrate the ADAM database?

  3. SQL database backup

  4. create the DSN connection on the target server

  5 copy the Migration.zip data for the target server

  6. run install.bat and follow the wizard, can I install the data to a different location as 2nd partition, or it must be in the same place as on the source

  7 restore the SQL database

  8 restart target vCenter

  Any help will be appreciated!

  Thank you

  S

  Sandyforvmware wrote:

  Hi Gkeerthy,

  Everything is on the same virtual server and I use SQLexpress.

  Please could you confirm 2 steps below:

  1. I don't have to create the DSN connection if everything is on the same server, is that correct? n ' yes no need to create the DSN

  2. I use 2nd partion on the Server D: target as a new location for the DB (Source have a single partition C: and all that is on it), it won't break anything, just? You can select the destination during installation... no thing will happen

  Thank you very much

  See the info up-to-date

• A physical server with 2 NETWORK interface card using a virtual machine as IPS (transparent VM) and everything should work normally?

  Hello guys.

  Is there a diagram that I made, using for my self this question.

  

  As you can see, I have a physical server with 2 NIC I don't want to use a VM (with Snort) as IPS / IDS system for inbound traffic on the management of VLANS. Is it possible to use this VM in this way (as an IPS/IDS, VM with two NIC without any routing work?)? Maybe you have a suggestion, how can I achieve this, as easy as possible? Maybe you have an opinion, what OS unix system do I use?

  Thank you for your time and your answers. Any useful information is much appreciated.

  Yes, it should work. You need to look out for, it's that the 'outgoing' NIC is not connected to the same physical switch as the entrant and that there is no link between these two physical switches, because this would create a loop of layer 2 on the network.

  I haven't worked much with Linux, but I don't see that you would have a problem to find some Linux/Unix with the possibility to bridge two network cards and use some software IPS to inspect the traffic.

• VMware converter restarts the physical server after conversion!

  Hello

  This can already city, but I can't find any discussion about it. I do some V2Vs using the converter Vmware 4.1.0

  The problem I have is that once the converter is completed, it randomly restarts the physical server, I converted (does not seem to happen to any of them). Of course, I don't want the physical server switch on again as changes could be made to it. I don't see any option in the converter to tell him not to restart or even stop.  It's a VtoV.  He is a SQL Server. Windows 2003 64-bit.

  I try without shutting down the server at all because it's a production server.  I don't have a Vcenter (to copy to an esxi to an another esxi).

  Any help would be appreciated.

  Hello

  For sure in the Converter 4 there is an option for the source stop server after migration.

  Below you will find a screen of VMware converter 5 with the option you are looking for. It is available at the end of the migration Assistant in OPTION --> option advance section

  

  Below the download link for Converter 5

  http://downloads.VMware.com/d/info/infrastructure_operations_management/vmware_vcenter_converter_standalone/5_0

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• What is a physical server to virtual best practices?

  I have a physical server with an attached drive HP 6400 Bay.

  We want to convert it to a virtual machine.

  What is advised to do?

  Hello

  For me personally I'd go with rehabilitate VM manually and then import / migration of data from P2V (using VMware converter) is generally not the sweet/good approach.

  in regards to the San, you can deploy the virtual machine as RDM virtual mode as a pure big VMDK (2 TB - 512 bytes).