comoconectar back portatiles por cable

Similar Questions

• connect back hence por cable

  Quiero connect back hence por no cable para restore windows 7 pues el I need restore no tiene lector cd o dvd, hay alguna manera hacerlo?

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• No can not mi more HP Deskjet all-in-One 4315 printed desde otros hence, solo print desde el ordenador al than esta conectada por cable.

  Buenas tardes, tengo cuatro hence y una Patrick en casa. Ellos esta conectado UNO has more por cable y los otros estan por medios inhalambricos online very. Desde estos very're realize the connection, miro imposible to me if needed controllers pero no none appears. Sigo el paso of ir a Panel of Control, printers usually y miro Fax y las printers are instaladas. Mirar the conexion of mi more pero intento no conectarlo can me appears a donde cuadro don't dice that none is you can set the connection. No Hago el problemas Solucionador click nada detecta. He comprobado Los cables esten well connected y paso el cada back por very reliable antivirus, porque me dijo el Técnico could harm por algun virus o hacker than the conexion bloqueando este estar has more o a los drivers. Not se why going asi, el ano pasado instaled las printers y no tuve any problema. Encima in uno los hence desinstale more than I need por cambios deshacer lo, desinstalar y volver a instalar el ordenador para ver algun modo, pero fue peor, porque habia if service Patrick desde ese ordenador no can not. If alguien conoce este problema agradeceria mucho knew ayuda.

  Oh for more information one of the hence are XP, Vista otro y otro 7. El unico computer that works well with the more're UN Windows XP.

  MUCHAS gracias

  Look in the upper right of this window.

  

  Where we see English, click on it and select your language from the list.

  

• HP Envy 100 stay connected. Back to usb cable how? (Mac OS 10.5.8)

  I'm on a Mac (OS 10.5.8).  I just changed USB cable and wireless two days ago.  Everything was fine my Envy 100 D410e printing.  Today, it does not print anything - says it is not connected, but my diagnosis network says it all right.  So I would go back to using my USB cable.  How do I do that?  [One of the suggestions in the forums for this issue, I've seen offered a download 'fix' it was a .exe program.]  UH... for a Mac?  This is why I want to go back with a cable.  It is therefore not worth.]

  You respond once AGAIN to my own post... :-)
  I decided to uninstall and reinstall without going through
  the wireless configuration. I am now to USB
  mode and I'm happy. Wireless problems
  I read on the forums make me sorry
  I bought a wireless printer. Oh, well, I'm printing
  Once again!

• EXPRESSIONS of back subnets por parte e ISP.

  Públicas tuve the pedir mas direcciones IP need an ISP, el problema e're me lo asigno in rango, rango otro el otro is asigno al mismo router secondary como lo, el problema no lo puedo ver aun asignandoselo an otra graphical mi router. Como puedo hacer para as asi como is asigno router al, yo tambien lo to lo can asignar out there?

  You can use secondary IP addresses on routers to configure multiple IP addresses for the same interface.

  But this is not possible if you configure the PIX firewall. PIX can not have more than 1 a physical or logical interface IP addresses.

  I hope this helps. the rate of responses if found useful.

  Concerning

  REDA

• Qosmio G20-102 TV TUNER: how to get this to work - what cables are required?

  Hey everybody,

  I just installed vista on my laptop QOSMIO G20-102 (PQG20), I have media library now.
  My laptop came not like MEDIA CENTER EDITION, it came under the home edition of Windows XP (laptop purchased in July 2005).
  I got 3 cables which I have no idea how to use...
  laptop was purchased in Dubai/Emirates and I live in Malta

  These are the cables >
  http://img399.imageshack.us/img399/7189/dsc00780gi6.jpg

  Now for my question (s):
  1 which of these cables do I need? Im just trying to figure out how to get my satellite tv or digital cable to work on my laptop.
  2 antenna adapter (see picture) is not for coaxial cable, what can I do?
  3 I did WINDVR more due to the upgrade of vista, Media Center Gets the job done but I don't know what to do... This guide has confused me even more > http://www.microsoft.com/windowsxp/mediacenter/using/setup/settop.mspx
  I don't have IR control cable, I do not have a remote sensor (but I have some sort of built in the remote sensor on the front of my laptop.

  I'm looking for advice as for example buy this, get rid of it, install this etc...
  Please, anything that can help is appreciated!
  If you need information more just ask, I am here ;)

  Yours sincerely
  Ishmael

  Hi ismael,.
  I'll try to help with that, but it's a long way to the road...
  I don't know what Tv system is used to Malta (Pal)?

  The best way to set up your TV's with Media Center 2005 edition.
  Cables:
  Check the back of your cable TV installation box and find the composite or SVHS output. If you have only the composite, you can use the composite cable of the posted image. If your TV decoder has the SVHS, so you should use, to the better image than composite. You must obtain a SVHS cable for this.
  Look for the audio output rca, too. Mix with the composite cable for the audio Qosmio.

  But you must have:
  1 control cable IR, for media center 2005 configuration as well as your TV decoder. It is cable connected to the remote sensor (see fact sheet on the back).

  2 sensor for your remote control and configure it with the remote control of your TV decoder. In this way, you can control the receiver cable channels, using the remote control for your Qosmio G20 media center edition.
  Recovery: you can change the channels on your TV decoder using the qosmio remote control.

  3. remote control for you media Center 2005, one that came with your Qosmio g20.

  Open the TV on Media Center 2005 configuration and follow all the steps required for installation.
  You must follow the guide, as is explained in the image you posted:
  http://www.Microsoft.com/windowsxp/mediacenter/using/Setup/SetTop.mspx

  If you have all these cables, you can use the Qosmio player to watch TV. It is not tied to windows OS.
  Here, simply connect the coaxial cable and let the Qosmio player search for available channels in your area. Qosmio player has the opportunity to set the colour TV system in any part of the world. all NTSC regions in all PAL regions.
  If you have the remote control for your Qosmio, TV keys will work directly with the Qosmio remote sensor on board, without needing the external sensor of Microsoft.

  I hope this helps you
  Francisco

• Power problem BEFCMU10 Cable Modem?

  Rotates this modem cable since August 2007, with no problems to speak of.  I have my computer, cable modem and router all current of execution by the same surge protector.  Until recently, I would turn the surge protector and the computer, modem and router would boot all upward and I was online.  But now when I do this the modem has finished start and stay with the 'line' and 'ethernet' LED does not blink.  By trial and error, I discovered if I simply unplug the power to the back of the cable modem, wait a few seconds, then reconnect only it - the modem comes up completely, and I'm online.  I did this time to be able to get online.

  It seems that something is about to go into my cable modem?  I can't think why it would make a difference to disconnect the power supply to the back of the modem, which would be different from "simply applying" power simultaneously to all three (computer, modem and router) I've done all this time?

  Someone has any suggestions, or if someone can provide information that this is a symptom that certainly my modem is about to die, and I should be looking for a replacement from?  Thank you.

  Whenever you power cycle your network, don't forget that the first thing you need to do is plug the power of your Modem, once all the lights are solid on your modem then you need to connect the power of your other devices, that make up your Modem correctly and then boot to provide internet connectivity to your other devices connected to your router.

• What kind of cable HDMI do I need?

  I'm trying to understand what kind of mini HDMI cable, I need to my Xoom.  Are there different sizes of mini Cables HDMI?  I keep seeing A HDMI to HDMI C.  HDMI A to D, or micro HDMI and miniHDMI.  So I am really confused.  I scoured the specs on the Xoom, but all it says is "HDMI output."

  rkbarth wrote:I'm trying to figure out what type of HDMI mini cable I need for my Xoom.  Are there different sizes of mini HDMI cables?  I keep seeing HDMI A to HDMI C.  HDMI A to D, or miniHDMI or micro HDMI.  So I'm really confused.  I've scoured the specs on the Xoom but all it says is "HDMI output."I found this cable on amazon.  Will that work with the Xoom?
  

  Hello.  You must the microphone cable HDMI to male HDMI standard.  The mini is not the right size for the Xoom.  I'll be right back with the cable you need from Amazon.   -Dan

  Here is the cable you need, it's a cable of high quality and type you need to connect to your TV.  It is a micro HDMI to male HDMI.

  Post edited by: DansDroid

• back-to-back connection between two virtual machines on different ESXi servers

  Assume that a name of Virtual Machine VM1 is on ESXi Server 1 and Virtual Machine name is VM2 exist on ESXi Server 2.

  We can configure two Virtual Machines back to back as connect us two physical machine back to back via cross cable. is this possible?

  Sorry for typo's fault, should be separated vswitch, with dedicated physical network card adapter

• Satellite M40x-112 white screen

  Hello

  I have laptop indicated above with this screen remains white if we it start.

  Everything runs in this way, the screen has time new problems diagram persist sometimes shown only still a side band.
  equipment and then in Italy, left repair, those exchanged display he returned later.
  Come to Germany the display shown only still a gray band for me downwards.

  I have then taken around equipment to look out if vlt cable am case, have in the back taken off cable screen and once again purely, but it remains the only white now only more white than other whole display which displays give me also the remains has therefore both tested.
  If I attach my external monitor go, only the display to the laptop remains white.

  Is it possible the inverter? or however that the vlt of cable?
  By the way, original, display in the store and it is tested heals.
  Therefore, I now excludes time display, diagram map.

  Can help them me vlt?

  Hi Klinsmann_1,
  your English is hardcore...
  If I you just the internal screen remains white when using and the external display shows all right.

  back to your question:
  the inverter is ok, because you see the light, otherwise, the screen remains black

  It seems to be a hardware problem on the adapter of the grafics means video card...
  or a broken wire but, for this purpose the colors should change if you move the screen...

  I think that there is no other way to ask an assistance servicepartner
  or you try to get a new grafics card and Exchange by yourself... bad job if ever done before...

• DisplayPort not answer &amp; causing the BlueScreens

  Dear HP team

  I bought two ProBook 6570 b as well as HP and four HP EliteDisplay E231 screens Docking Stations. My configuration is:

  The ProBooks are connected via Dockingstation and DisplayPort with two screens of each. I use a hub of MST of the Club for the DisplayPort connection. An installer works perfectly, the other problems.

  AMD Catalyst Control Center shows both screens, and even the Option of desktop resolution shows that the two E231 are identified and I can arrange them. Well, even the mouse disappears on the screen to the right (expand the office, left of the screen is main screen). But the right screen keep black, received no signal and goes into standby mode.

  The 2nd caused 'challenge' is: after a few minutes, sometimes seconds, Windows 7 Professional 64 bit blocks with a blue screen. As soon as I unplug the right Club STD Hub, laptop/windows computer screen/run s fine.

  I can also run very well if I only work with the right screen connected directly to the port of the docking station and do not use the MST Club DP Hub

  If I connect through the Hub of STD of Club, there's no signal.

  As soon as the two are connected via the Hub of Club of MST, problems/accidents happening again.

  Thanks a lot for your help.

  Christian

  I found a solution and - why not I it earlier... However, it's sort of a simple fix.

  A HP Elite231 screen is now connected via DisplayPort adapter to the HP Docking Station.

  A HP Elite231 screen is now linked through DisplayPort on the DP-Slot of the notebook: Fortunately, the DP-slot on the HP EliteBook is on the left edge of the back, so the cable can be easily connected.

  Contra: whenever the laptops must be removed from the docking station to visit customers, the cable is unplugged and replugged once back at the table manually.

  Chao, Chris

• Safari crashes and other weird things happening

  Hello, I have a macbook pro retina early 2015 and I noticed some strange things with my mac.

  (also, I'm really sorry, English is not my native language, I probably make many mistakes)

  For two days now, my safari started crashing every day. I found it very strange since I have just my macbook for a month now. When the window opens too warn me and too "send the problem too mac ' there is a white window with nothing in it. I guess now you write what is your problem?

  In addition, whenever I restart the computer in the morning, the sound is disabled. While when I restart my computer the night sound is enabled.

  I also noticed that the morning my update to adobe symbol is too following the wifi so that in the evening its all just disappeared.

  And another thing that I think is weird is that my 'other' in my disk space going 18.2 GB too 18,66 GB no reason apparent. Sometimes it even goes back 18,48 GB and then it go higher still.

  In the months that I have my macbook, I downloaded a program for my wacom tablet, installed Adobe creative suite CS6 installed 2011 of a disc and some powerpoint microsoft word a word documents from the website of my school. also too much yoshimite el Captain went and installed all the updates again. And I installed a very old printer and scanner HP photosmart C3180.

  I do not use wifi, I use the cable. Since I got my mac I never saved my password on it. I put on my firewall and I do not have too use the plug-ins. I also block each pop-up.

  Now at the beginning of this week, I did three stupid thing. Accidentally, I clicked on an ad on youtube mackeeper and also went to the Web site. I clicked on it. (now I see on all the Web sites that support ads advertising of mackeeper. I looked in my business but I have not seen a trial of mackeeper)

  Then then I accidentally typed two websites, I need to search too and both times I came across a site that told me I had a virus. The first pop up led me also a page with my ip address is displayed, and the second was a blank screen. (this happened with Wifi on a different location)

  I click on anything and quit Safari, immediately after I saw him.

  With wifi, I noticed some things had moved too much trash. This consisted mainly of recoverdfiles with WKresouches in them, and I deleted it. Back on the cable there was no recovery file in the trash more

  So, what I have now is amazing. How is it possible that my safari crashes? The other things I mentioned bugs or would it be a malware infection? If it is a malware infection, where should I look too remove it?

  https://www.Malwarebytes.org/antimalware/Mac/

  

• HP officejet pro 8600: office jet pro 8600 scan generates only black pages

  Scanner worked fine until today when I tried to scan a page.  Print and scan 4.9 doctor says my scanner is fine, but scanned page is black and adjustments do not change this.  Also, I used to be able to add a page or more and who went with Windows 10.  This machine is 4 1/2 years and not under warranty.

  Hello @kathy817, hope you are well!

  Thank you access the Forums from HP Support for extra support! It's a good place to find the help you need, other users, HP experts and other support staff.

  I see that you are having problems when parsing printer Officejet 8600. Could you please try and make a copy of the photo on the printer? Let me know if the copy option works very well.

  If the copy also gives you a black page, try the following steps:

  • Unplug the printer from the power outlet.
  • Wait 2-3 minutes and then plug back the power cable directly to the wall outlet (do not use a surge protector or an extension cord)

  If the copy is fine, please let me know. In addition, tell me how the printer is connected. Is it connected using USB or wireless?

  I'll watch for your reply. Good luck!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Como una tarea DAQmx UN programa hecho en Labwindows run

  Buen dia. Estoy trabajando con mi primer proyecto con datos en Labwindows closing tarjetas y verdad ando a poco perdido por no decir bastante. He buscado manuals Hay y ayuda con temas related to pero para labwindows muy poca information, the mayoria esta para Labview.

  Bueno, lo that pasa are that the USB-6509 than tiene 96 tarjeta Adquira canales bidireccionales, ya realize back tasks, a Quebec City of me which son los puertos entrada y otra which son los puertos of salida, las estas realize desde Labwindows, ahora lo deseo are in el programa run yo can call tasks estas para mandar salida por the card data 6509 y leer datos por los puertos entrada.

  He found examples which en NOR pero uno tiene than configurar el puerto en the user graphical, además lo hacen con than a solo puerto, yo deseo configurar los puertos desde el código y sober todo son mas UN puerto los than the user. Alguien tiene alguna idea como debo hacer lo as deseo? Yo CBP that era muy sencillo por eso habia comprado esta tarjeta.

  ASI lo as deseo básicamente are than the task that has the con config con los puertos salida enviar some hex values a cada puerto en tiempo intervalos para that ish often operaciones en UN tablero prueba y con task as tiene los puertos entrada estar group los resultados configurada.

  Alguien tiene una idea o algo parecido example?

  Saludos...

  Roberto M.

  That tal Roberto;

  Para poder leer/write varios Puertos en you tarjeta desde CVI puedes funcion DAQmxCreateDIChan/DAQmxCreateDOChan as con varios puertos para configurar y asi leerlos conjuntamente.

  Te envio an example sencillo como realizarlo (in this case leo back puertos por lo as uso UN U16 reading, TR quiesieras leer mas puertos tendrias than use otra funcion).

  I hope the information you sea ayuda.

  Suerte

• Problema con el useful Red

  Tengo problemas con el red useful. Estoy conectada mediante wifi y of repent sale me el icono of Quebec debo conectarme por cable ethernet. If in ese momento voy a the solo red useful config caught me el useful por cable ethernet. DON'T I already conectarme of forma inalámbrica!

  Please select your language in the drop-down list at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below: 

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace:
  

  http://support.Microsoft.com/common/international.aspx