No can not mi more HP Deskjet all-in-One 4315 printed desde otros hence, solo print desde el ordenador al than esta conectada por cable.

Similar Questions

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• Can not scan using Savin 8045 All In One printer/copier/scanner

  Original title - scanning problems

  I connected a Savin 8045 All In One printer/copier/scanner of my Dell Vostro 470 computer via a cat 5 cable and router. It prints wireless and locally but not scan.

  Hi TomMargiot,

  To provide the proper resolution, I would need more information on your side.

  1. which version of the operating system are you using?

  2. do you receive any error messages?

  I suggest you to uninstall all in a printer\scanner\copier and install it again and check if it helps.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  If the problem persists, I suggest you to contact the Savin Support for assistance.

  http://www.Savin.com/global/support.aspx

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Can not install my new HP All In One printer

  Original title: CANNOT INSTALL a PRINTER ALL-IN-ONE COST of HP 5610

  EVRY TIME I TRY TO INSTALL A FRSH HP5610 ALL-IN-ONE PRINTER, I GET THE MESSAGE AFTER

  NO MISSING DLL FILES, SLBCSP, SCCBASE, GPKCSP ENUM I DOWNLOAD AND TRY TO INSTALL NOT NO CHANCE

  See if it helps:

  Error blocks the installation of the HP printer driver: sccbase.dll, slbcsp.dll, gpkcsp.dll and Enum
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-blocking-HP-printer-driver-installation/5c7910a1-1b4b-404F-875e-12e092b07db1

• HP Deskjet All in One 3545: printing problems

  1 shows low ink icon. A left less, just half. Thought b & w cartridge is low. Ordered and this has changed. Print an alignment page. During the printing of new document, new alignment message came. Returned and gave the print order. Print a faint fary. Check the ink level. Right and left less. Stop printing. What needs to be done?

  2. when the printer is on, sound of NEEQ move is not smooth, little stumble.

  3. If put more than one paper in the tray, all are drawn in and then deported without no printing. Even place a paper displays the message that says to remove the paper and place it again in the status bar.

  4 visit to a mechanic charges are prohibitive.

  5. help online?

  6 resets useful?

  7 printer is in mode (wi - fi) network

  Hey @Achyut18,

  I understand that you have some problems with the printing of your Deskjet Ink Advantage 3545 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once it's done this document describes How to solve print quality problems with your printer. If after completing the document, you still have problems with print quality, then the cartridge will need to be replaced. Please find below the link to contact HP support.

  It seems that you may have had a problem with collection of paper in the printer. This document explains How to solve problems of choice. If after completing this coument you are still experiencing problems with pulling on the paper then the printer will need to be replaced. Please find below the link to contact HP support.

  If you are looking for other support options, from real cartridges not refilled to replace, or if the printer needs to be replaced so you can contact HP support directly by clicking here and filling out the form below.

  I hope this helps with your problems and I hope you have a great week!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• How can I change my printer hp deskjet all-in-one of printing in the a6 format and back to the marker a4 2542

  Hi my hp deskjet printer seems to always print when I print anything on the web for my son even if it should print in A4 format a6 (a4, this is what is stated in the paper size) then how can I change it so it will display again a4 and a6 not when I print anything on the web

  Thanks stan

  Hello again!

  I understand that you have a problem where you set the printer to a specific setting and it is switching to a wrong default setting.

  Did you ensure that when you leave the game advanced settings of the software that you are by clicking on 'apply', then 'Save'.

  Can't wait to hear back on your part.

• HP deskjet all-in-one 2540: printer saying phone we not available - it is not

  Phone says printer is not available, but it is

  Thanks wil give that a try. Tried turning off printer but not the phone. Thanks for your advice

• HP deskjet all-in-one 3630: printing on linux mint

  Hello

  I have a problem with my printer which, when used with windows 10 works fine, but I'm also using Linux Mint cinnamon 17.3 O.S. on my laptop which is my favorite operating system. The problem is that I'm unable to print, or Linux does not recognize this printer model or vice / versa

  The printer is there when I open "Printer" in the Mint menu. But that's all. If I open another window in ' what impression "it shows several documents ready to be printed." But does not print! Although it printed fine on my old desktop running mint "Mate" O.S. (now is no longer in use). I tried to download and install "HPLIP but unsuccessfully someone out there with a solution, it would be greatly appreciated."

  Hi, I tried your suggestion and I now have my installed printer, my printer flash lights but it wont print, I built a 33 print queue jobs... have cancelled their and tried to print a test page, but nothing prints... either by the way, I am pretty new to Linux and I'm on a learning curve steep here.

  Thanks a lot for your suggestion. Will do some research on the web.

• When I enter an apostrophe when online, it still shows the quick search box, and then I can not type more

  original title: quick search

  When I enter an apostrophe when online, it still shows the quick search box, and then I can not type more

  Hello
  
  1. it occurs when you use a particular application or all applications?
  2 have you tried to use a different keyboard?
  
  Method 1.
  Check what happens when you use the on-screen keyboard. If it works fine here so you can check using another keyboard.
   
   
  Method 2.
  If the problem persists using a keyboard screen ion then run the sfc scan and check.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
   
  To do this, follow these steps:
  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
   
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Is it true that I can not run more than 60 Hz on screen?

  Is it true that I can not run more than 60 Hz in 640 x 480 on my laptop with nvidia go 7600? or is there a driver for my lcd screen...?

  Why do you want to change the screen on the TFT screen refresh rate?
  LCD monitors do not suffer the same problems as their predecessors of the TRM and the refresh rate does not simply mean the same thing. LCD or TFT monitors will provide excellent quality and resolution at 60 Hz.
  Its response time, brightness of the Image and the Image contrast ratio the most important question for a TFT or LCD monitor.

  Operating systems set the different default refresh rate. Windows 95 and Windows 98 (se) together the highest refresh rate possible. Running Windows NT operating systems such as Windows 2000 and Windows XP descendants, however, by default the value of the for the 60 Hz refresh rate.

• Photo Gallery is ID not a scanning device (HP Deskjet all-in-one).

  Photo Gallery is ID not a scanning device (HP Deskjet all-in-one).  Always before A.
  Under Vista, updated on an HP laptop.
  Already checked for printer is installed and works properly and for updates of device driver and the computer restarted.
  Help?

  But... not the same question... the next Document in HP
  maybe worth a visit:

  HP printers - Scan button on the
  Printer does not work properly when
  the printer is connected to a Windows
  Vista computer
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809848&LC=en&cc=us&DLC=en&product=303756&rule=23585

  You may be able to find additional documents to the service the customer of HP:
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en and... It may be interesting to try to uninstall/reinstall the drivers of all-in-One.

  Also... If it is a recent issue, it may be interesting to try to make a system
  Restoration of some time before he started.

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Good luck...

• BlackBerry Smartphones Can not add more contacts to the address book

  Hello

  I have a blackberry curve 8520.

  for the momment I 288 contacts but I can not add more. I go to the menu, address book, new contact, the window give me options, I add the information (name, phone, e-mail, etc.) and when I want to save the contact he does not save

  I tried to restart the removing the battery for a minute and reboot, but always with the same problem.

  Also, I figured out that when synchronize my bb with Desktop Manager, the address book is not sync that it says (address book not installed) and this is why I can't drag contacts to reinstall the info because I don't have to return to the top of the address book

  Please I need help with this question

  Thank you

  While there is no limit on how many contacts you can have on your device, there is a soft limit that you can have as many times as the memory of your device can handle. Check the available memory to see if you have any remaining space. If this isn't the case, then consider cleaning out / uninstallation of some things that you don't need to increase the memory available to more contacts.

• CMDGW_CAT:3441: ERROR: can not have more than 3 entries in the LIST RACCESSPOINT

  Hello
  I have Tuxedo 8.1 in HP - UX.
  
  
  In the section of my dmconfig that I have:
  
  ....
  .....
  
  SERVICEF LDOM = DOMLOCAL RDOM = WTC1, WTC2, WTC4 WTC3
  .....
  .....
  
  I have this error when I tried to compile with dmloadcf y dmconfig:
  
  Invalid value
  CMDGW_CAT:3441: ERROR: can not have more than 3 entries in the LIST RACCESSPOINT
  CMDGW_CAT:1546: ERROR: dmloadcf: above the errors found during the syntax check
  
  increase the value of the parameter RDOM plus 3?
  How?
  
  Thank you...

  Hello

  Syntax:

  Service LDOM = local_domain RDOM = dom1, dom2, dom3

  sets the remote domains of failover for this particular import. It is not intended to provide access to a service in several areas. What you want, it's basically what you were doing, i.e.,.

  Service LDOM = local_domain, RDOM = dom1, dom2
  Service LDOM = local_domain, RDOM = dom2, dom3
  Service LDOM = local_domain, RDOM = dom3, dom4
  Service LDOM = local_domain, RDOM = dom4, dom1

  It would provide balance between the 4 areas and always provide areas of failover, although assigned to the ON_STARTUP linking strategies, then the following is sufficient:

  Service LDOM = local_domain, RDOM = dom1
  Service LDOM = local_domain, RDOM = dom2
  Service LDOM = local_domain, RDOM = dom3
  Service LDOM = local_domain, RDOM = dom4

  As only active areas will be used and those inactive is ignored.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• How can I keep my HP1510 all-in-one to print the test pages as much?

  How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

  Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

  The alignment page will stop printing when the alignment process is complete.  See the page here for more information.

• F4500 all-in-one HP printer: printer all-in-one Hp DeskJet F4500

  I have a HP Pavilion Slimline with an office jet f4500 printer and Windows 7, but I can't find the driver on their website. The only driver that arise when I type in the model #, than these two. Any ideas?  Are compatible with my printer?

  DeskJet F4580 all-in-one of

  DeskJet all-in-one F4583

  Add: My printer is not found in the list of devices & printers in Control Panel.

  Hello

  I was able to download the full software functionality, using my Internet Explorer browser.

  Try the HP printer install wizard for Windows , it was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP printer.

  This aid?