Compac presario CQ5504F don't give me a place to create a restore point.

Similar Questions

• creating a restore point gives error 0 x 80042308: the specified object could not be found

  What is the specified object cannot be found - 0 x 80042308? trying to create a restore point in the protection system?

  a snapshot could not be created, please check "vss" and "spp" applications for more information event logs!

  Details: the specified object is not found! backup and restore system keeps giving me these messages!

  HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!

  Thank you!

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 3:
  Try the running System File Checker and see if it helps:
  http://support.Microsoft.com/kb/310747

  It will be useful.

• I don't see on a month plus computer, the restore points.

  As stated in the previous question,

  the System Restore Points are available for the current month.

  The calendar with Restore Points does not pass in the previous month by clicking on the<>

  I have Windows-XP-prof

  Original title: in my PC with Win - XP, system restore points are available for the month of month only, without precedent, please help.

  I am unsure as to the cause of your behavior, but this article may be useful:

  'System Restore 'restore points' are missing or deleted'
    <>http://support.Microsoft.com/kb/301224 >

  HTH,
  JW

• Compaq Presario CQ5504F at the start of the POST screen, then freezes, does not recognize the hard drive

  My Compaq Presario CQ5504F desktop computer (about 4 years) turns on, displays which I assume is a POST screen shows:

  As of the 2010 AMIBIOS Bios, Bios Rev. 6.08, 28/04/2010, CPU AMD Sempron 140 2.70 GHz 1024 KB ram Cache (L2)

  Installed memory: 3072 MB, installed USB controllers.

  Correctly displays "1 drive ST3500418AS" (seagate 500 GB SATA h/p) and "HP DDVDW TS-H653R" (optical drive)

  Tried a "HP Bootable Diagnostic CD - R' which took"PC-Doctor ".

  CPU Sempron tested and passed and 3072 MB of RAM and the HP DDVDW disc.

  Next: "Testing: path of the boot!" WARNING - BIOHD-2 error code.   WARNING: no hard drive detected ", followed by proposals to check the cables, etc.."

  Also shown: "NVIDEA Boot Agent 249.0542?

  I opened the system unit and disconnected - reconnected the two connectors on the h/d.  checked sound & vibration watch Variator is running.

  Also checked "Boot Device Priority:

  1 > [CD-ROM Group]-[HP DDVDW TS-H653R]

  2nd > [Hard Drive Group]-[not installed]?

  3rd > [group floppy]-[not installed]

  4th > [group of network boot]-[NVIDIA boot agent]

  Found a few useful tips on PC Help Forum, but advice required to enter the BIOS Setup, and I have not found a way to get into that.  Some of the function keys don't seem to work.  ????

  Would be very happy to suggest further repair attempts.

  VIC

  VIC, welcome to the forum.

  Normally, the BIOHD-2 error message indicates that the hard drive has failed.  Here's a guide to help you run the SMART for the reader of the BIOS test.  If you get a similar error message, you must replace the hard drive.  Also, here is a guide to help the recovery of the system once the drive has been replaced.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Compac Presario VN457AA: upgrade memory

  Please help me!

  Is it possible to upgrade my Compac Presario mod.no. VN457AA 2 x 2048 MB DDR3 SD ram 2 x 4 096 MB DDR3?

  There are only 2 memory slots.

  It is very slow

  OSHDK

  OSHDK, welcome to the forum.

  You have the maximum amount of memory installed.  However, you can perform a system recovery:

  http://support.HP.com/us-en/product/Compaq-Presario-CQ5200-desktop-PC-series/3999467/model/4048603/how-to

  This will return your computer in its original configuration to increase the performance of the system.  Installing and uninstalling programs leave remnants of them, which, over time, will begin to slow down the computer.  Must make a backup of your personal data before you start.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• COMPAC PRESARIO CQ 57: MISSING WEBCAM

  Preinstalled HP compac presario cq 57, webcam windows 10 (from 7) missing, now have webcam 7 installed, not the same smaller image size and not the effects menu. How can I reinstall? NO TRACE SHOWN ON THE SEARCH, IS POSSIBLE FOR HP TO TAKE CONTROL OF THIS MODEL [UTOR AND RE INSTALL. FEAR RATHER COMPUTOR ILLITERATE.

  Try to update the Webcam drivers.

  GoTo Settinges to start menu > security update and then check the updates, I hope it will solve the problem...!

• Compac presario CQ62 wireless adapter disconnects frequently

  My laptop compac presario CQ62 wireless adapter disconnects frequently while I'm online. y at - it a driver update that will help solve this problem?

  Hello

  Thanks for providing this information.

  I would like that go you to this link: drivers PC laptop Compaq Presario CQ62-421NR. Once here use the "scan now" under the control of the updates. This will scan your laptop all the updates that are available. If you see something that indicates wireless, make sure that this update is complete.

  The other option to do this: go to the Device Manager (start type in search Device Manager), under network adapters, you should see the wireless card. Make a note of it (it must be a brand name) so that you can reply back with it. You can then right click on it and try to update directly from the driver.

  If neither help in updating the wireless, please answer back with card network information. In addition, the operating system that is currently installed on the laptop.

  Thanks for your reply.

• problem with my HP compac presario CQ42 laptop (32 bit, XP)

  My HP compac presario CQ42 PORTABLE (32-bit, XP) show this massage:-

  Smart disk error
  INTELLIGENT drive control has detected an imminent Doctor. To ensure no loss of data, please backup the content immediately and run the system diagnostics hard drive Test.
  Hard drive 1 (301)
  The F2 System Diagnostics

  Please tell me how I do?
  Enter - consider starting

  Hello

  Please use this post:

  http://h30434.www3.HP.com/T5/forums/replypage/Board-ID/general/message-ID/54154

  Thank you.

• Compac Presario CQ57-229WM: failure of Compac Presario CQ57-229WM Memory Module

  Compac Presario CQ57-229WM w / Windows 7

  I get the following text "Windows has recovered from an unexpected shutdown. A problem caused Windows to stop working correctly. Windows will notify you if a solution is available. »

  Followed by a crash dump

  Verification of results in the readers:

  Drive hard test Passed

  HDD SMART Passed

  Module memory failed

  1 732 608 bytes of memory tested system OK

  Fault memory test

  Any help would be greatly appreciated.

  One or maybe two sticks of memory failed. If it's not very common to have two fail - it wouldn't be a bad idea to replace both if you can afford it. You could also spend 4 GB of the 2 GB, you have now.

  Crucial is always a reliable source of memory and they have single sticks or a set. Click on 'Show memory more compatible upgrades' under the memory listed to see the simple sticks and sets:

  http://www.crucial.com/USA/en/compatible-upgrade-for/HP-Compaq/Presario-cq57-229wm

  You can remove a memory stick at a time and run the test to determine if one or both is a failure. Your interview Guide & shows how remove and replace memory:

  http://support.HP.com/us-en/product/Compaq-Presario-CQ57-200-notebook-PC-series/5091489/model/5111956/manuals?lang=en&cc=us

• Presario A916NR: Vista OS 32 - bit compac presario A916NR

  I've lost 32-bit operating system Vista compac presario A916NR I have the product key but no software cd

  Hello

  You can always order the part on the following link - use the 3rd dealer recovery disks of these, BONE will be activated automatically via the slic table in bios and the security certificate onboard.

  http://www.computersurgeons.com/p-15598-recovery-kit-466252-001-for-Compaq-model-number-a916nr.aspx

  Kind regards

  DP - K

• Problem finding drivers for Compac Presario CQ5210be

  Hey,.

  I'm looking for drivers for my Compac Presario CQ5210be but HP doesn't support it not lonnger.

  So my question is if anyone can help me?

  Best regards

  Vegeetje

  I asked that someone from HP to see this. It should be fixed quickly and your Support page appears if you click on "Support" at the top of this page and you put in your model...

  If it is not fixed in the coming days please post to draw attention to your problem and I will ask you once again.

• Computer does not start up___Can I download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.

  My laptop does not start at the top. It indicates that the following file is missing or damaged WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  Download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.

  See if anything here helps-

  How to recover a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

  See also

  How to Troubleshoot Registry Corruption issues
  http://support.Microsoft.com/kb/822705

  How to fix a missing or corrupt Windows\System32\Config\System file
  http://xphelpandsupport.MVPs.org/how_do_i_repair_a_missing_or_cor1.htm

  TaurArian [MVP] 2005-2010 - Update Services

• Can I run win7 on a compac presario re468aa

  Can I run win7 on a compac presario re468aa computer

  According to the following specifications:

  COMPAQ Presario SR2013WM (RE468AS) Desktop PC Athlon 3800 + 512 MB DDR2 160 GB HDD capacity NVIDIA GeForce 6150 LE Windows XP

  You need to update to a minimum 2 GB RAM to comfortably run Windows 7.

  System requirements:

  * 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor

  * 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

  * 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  * Peripheral figure DirectX 9 with WDDM 1.0 or higher driver

  ---------------------

  The upgrade to Windows XP?

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (windows.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services.

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

• gives error of insufficient privileges creating triggers

  Hi all
  
  
  I am facing the problem of insufficient privilege on the base tables when creating triggers. I said three diagrams A, B, C in my database.
  
  Base tables are in the schema A. I gave all subsidies on the base table to the schema B and C.
  
  grant all on base_table_name to B;
  grant all on base_table_name to C;
  
  I created synonym also on this base table.
  
  And I m creating triggers in the schema B.
  
  When I run the query to trigger computer giving following error:
  
  
  + AFTER INSERT OR UPDATE OR DELETE ON BASE_TBALE_NAME * +.
  ERROR at line 3:
  ORA-01031: insufficient privileges
  
  
  even I checked in dba_tab_privs for this base_table... is to show all grants the user B and C.
  
  What should I do now?
  Please suggest...
  
  
  Kind regards
  Andy.

  The thing is that to create a trigger in your own schema on a table in your schema, you must have the trigger system privilege to create, to create a trigger in any schema on a table in a diagram, like SCOTT. SCHEMA, you must create any trigger system privilege, also to create a trigger on the database, you must have the privilege of database trigger system administer...

  and don't give any privileges on the base unnecessarily tables, you don't need them... you just have to create any trigger for IT... Why give all the base tables...

  because when you give everything on the base tables give them unnecessarily FLASHBACK, DEBUG, QUERY REWRITE, WE COMMIT REFRESH, REFERENCES, UPDATE, SELECT, INSERT, INDEX, DELETE, ALTER privileges

  Concerning
  Karan

  Published by: Karan on July 25, 2012 12:22

• Newly created profiles don't be loading not/are not created properly

  Windows Server 2008 R2 I have an administrator account that works.

  I wanted to start earning several accounts for others to use, but met with questions.

  Any profile that I create (standard or admin) cannot connect. I get the "Profile Service could not load... blah blah."

  A little digging revealed that the guest account also has the same problem, and that it creates no new profile I create received a profile under C:/Users folder.

  "C:/users/administrator" and "C:/users/Public" exist, however no records exist for all new profiles I create, or for the guest account (I'm not entirely sure a guest account gets a property.) I've never really played with guest account before).

  Windows always recognizes the profile, I created. Enter user accounts shows that there are three profiles (Admin, guest and that I did). Can I change the password and others on new accounts.

  Also, inside the register, I noticed that there is the file '$-1-5-... '. "Admin and some other networking and other things, but a single folder for profiles; the administrator. Nothing for the new account I created. I didn't take these files before, which means that I didn't manually delete the registry files/folders for the user accounts.

  I'm sure this is the folder of registry administrator account because the data file "ProfileImagePath" says "C:\Users\Administrator.

  I think it's all under "HKey_Local_Machine/Software/Microsoft/Windows_NT/CurrentVersion/Profile List.

  So what's happening? I don't want to reinstall or do a system restore.

  I've always had this problem since the first profile, I created. However, by the time (months ago) I didn't know it's this deep. I've linked it to accounts via Remote Desktop and thought it was a problem with some settings of remote desktop.

  Sooomewhere I read that Google Updater and chromium could cause Corruptions of profile. There is no Chrome. However I do not think that there is corruption. It's just too bad about the failure of the creation of user folders > _ >

  Hello

  The question you have posted is adapted in the Microsoft technet forums. I suggest you post in the Microsoft technet forums to improve the assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope that helps.