CompactRIO connected watch - lapping NI MAX but Labview can detect

Similar Questions

• problem with express mini pci wireless lan card. I can't connect to internet via wifi but I can connect to the internet via cable.

  Hello! I have a problem with my card express 11 b/g/n wireless lan mini pci because I can't connect to internet via wifi but I can connect to the internet via cable. whenever I try to connect it repeat to myself that there is a problem with your wireless network card. I tried troubleshooting, uninstall and reinstall the program, but always the same result. I'm updating too but still the same thing. I use a windows 7 Professional on my Lenovo 412. can someone help me? Thank you!

  Hello

  Method 1: I suggest you to follow the instructions of the link to solve the problem of network card:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 2: Troubleshoot wired and wireless in Windows network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference: http://forums.lenovo.com/t5/R-and-L-Series-ThinkPad-Laptops/L412-Wireless-Automatically-Disables/td-p/264447

  You can also post your question in the forum of Lenovo to get help:

  http://forums.Lenovo.com/

• My printer is connected to my WiFi router, but I can't print

  My printer is connected to my WiFi router, but I can't print.  When I ask to print something, it goes through the options but nothing prints or is pending.  Any ideas?  Low ink, would result even if I printed a test page and newwork connedtion.

  Hello

  1 are there any changes or updates made on the computer?

  2 Windows operating system is installed on the computer?

  3. do you get an error message? If Yes, what is the full and exact error message?

  4. What is the serial number and model of the printer?

  I also suggest send you the link and try to run repair and check.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  I suggest to see the link and try to run the troubleshooter.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if it helps.

• I can connect to windows live hotmail, but I can't open the emails.

  "I can connect to windows live hotmail but I can't open the emails, Server error appears on the screen, but I'm connected to the internet, please help.

  Hello

  You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.

  According to the error you found, it may be a known issue, see the following announcement:

  http://windowslivehelp.com/thread.aspx?PostID=5785957e-6007-48a1-85c7-03170a5a4086#5785957e-6007-48a1-85c7-03170a5a4086

• cRIO appears in MAX, but he can't see in LabVIEW, why?

  I had to hang a cRIO-9012.  I can see it in MAX, buy do not see it in LabVIEW.  LabVIEW is a PXi-8195 installed on the same network, but it doesn't seem to find the cRIO.  While setting up to MAX, I got the following warning; "... you enter the subnet mask is the target and the door of entry into two subnets. ».   The entry door is not specified, so I'm not clear on what that means.  I ping the cRIO from the command line, and it appears in MAX, is visible on the network.  LabVIEW just don't see it when I try to add to my project.  Any thoughts?

  I guess you look at something like that? http://forums.NI.com/NI/attachments/NI/280/1546/1/no%20cRIO%20Target.jpg

  This occurs when the NOR-RIO is not associated with your LabVIEW installation. What version of LabVIEW you run? NEITHER RIO 2.4.1 supports up to LabVIEW 8.5.1, if you use 8.6, you use NI RIO 3.0 or higher.

  If this is not the case, simply install NI RIO 3.0 will fix probably the problem.

  In regards to the subnet is the thing:

  The reason that a device on another subnet does not appear in the list of 'existing or peripheral targets' in LabVIEW is because it only goes to search for the same subnet, your computer is on. If it was looking for all possible IP addresses, should be... forever. It's one of the reasons for which subnets were created in the first place. If your cRIO and your computer are in different subnets, LabVIEW automatically find it. You can add it manually by selecting "Existing device on the remote subnet" and typing in the IP address. Or you can go back to MAX and place them on the same subnet.

• Max and LabView can communicate with the device series

  I'm trying to connect a balance Mettler - Toledo JL - 6001 to my computer as an entry for a LabView program through a RS-232 to USB line.

  In MAX, I get sometimes (but not always) the error message "the resource works correctly, but VISA cannot currently access."

  On the general tab for this port, I get the message' VISA returned this camera when searching for resources, and MAX was able to use VISA to analyze the resource name.  The resource was busy, so MAX could not successfully log on VISA to the device. »

  In LabView, the program runs, but I get all zeros as output which is definitely not correct.

  I tried deactivation and activation then the port. I tried making sure that no other program is using the device, and then restarting the computer.

  I'm not sure I have the correct driver installed for this scale (MTT coach), (they do a lot of balances and some pilots and was not sure than to use). I don't know if that makes a difference in MAX.

  A few tips for how to get balance and the MAX to communicate? Also, I know almost nothing about the transfer of digital data / series a response very dumbed down would be greatly appreciated.

  Thanks in advance,

  Joanna R Murphy

  Hello Joanna,

  Please take a look at this white paper. There are several solutions for this error.

  Best,

  Carmen C.

• IM triying to connect my sons nintendo wii, but I can't

  Im trying to connect to my son, nintendo wii, I have a windows vista, but nothing comes out n I can't do

  Hi ocampo yuri.

  How you try to connect the Nintendo (wired or wireless)?

  Who works on another computer?

  Check if the device is detected in Device Manager. To open the device manager follow the link below.

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  Please go back to answering the questions so that we can help you better.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My network connection shows no internet access, but I can access the internet

  Hardware: Dell XPS 8300

  OS: Windows 7 family

  System type: 64-Bit
  In the network and sharing Center, it is show the connection between the network of Multi and the Internet has an 'X', but I have full internet access.
  Is there a way to fix this?

  Hello

  I understand that you are able to connect to the internet when your computer showing no network connection.

  1. did you of recent changes to the computer?

  I would suggest trying the following instructions and check if it helps.

  Method 1: update the network driver.

  Steps to update of network driver:

  1. click on the Start button.
  2. in the search box type devmgmt.msc, and then press ENTER.
  3. Select the network card device and right click on it
  4. now, select Properties.
  5. in the Properties window, on the driver tab, click Update driver.
  6. After installing the updates, restart the computer.

  For more information visit: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Method 2:

  Temporarily disable the Antivirus and firewall

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• my printer and computer are both connected to my wireless network, but I can't print documents

  I have a HP Photosmart 6180 and am using Windows Vista.  Both the printer and the computer indicate that they are connected to my wireless network and my computer shows my printer on the network.  When I try to print a document from my computer, nothing prints and printing on my computer says a mistake of the printer.  The printer itself works fine and HP diagnostics indicate that everything is ok.  Any suggestions?

  OK, go to start > Control Panel > printers and delete all instances of the printer.

  Next:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Acrobat DC cannot find the scanner connected to 10 Home Windows but Windows can

  Hi all

  I'm fighting to get DC Acrobat and Photoshop CC to scan from my printer/scanner HP connected via a wireless network.  Acrobat DC reports no scanners found then I have to use a browser for the analysis that works every time.  So my question is which port is DC Acrobat and Photoshop to use so I can check if these ports are blocked by another application.  Many thanks and best wishes,

  Paul D

  Have you installed the scanner driver? These applications will not reach out by using a browser.

• cannot connect to web gui (apache) but I can't get into obtool

  I have a 10.4.1 installation I used regularly for a long time. I'm connected even in yesterday afternoon to change a backup schedule.

  This morning, I can log into the apache/web site. I get my password and it returns me to the login screen. I know I'm in the correct password, because if I get the wrong password... it tells me that my connection is incorrect. Yet, when I enter the correct password... it just returns me to the sign again. I don't have any errors in apache error logs and no errors in the logs for ssl access. The connection process also creates the sess_ file in /tmp/ then... I am at a loss to understand why. I restarted the service several times and have even restarted the server. OEL5 5 update

  Any help would be appreciated. Thank you

  He end up being that the

  point mounting/usr/tmp was not always full.

• HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

  I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

  Hi @lelg,

  I understand that you want to configure the printer on the wireless network. I can help you with this.

  Uninstall the printer software.

  Uninstalling the printer software.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• can not conect to internet in Firefox, but I can't conect to internet explore

  I just made some updates the window and after restarting the computer, I can't connect to internet in firefox, but I can connect with internet explore. It seems that she had lost the settings. By clicking on the icon of mozilla on my desktop - it does nothing so I can't go to mozilla and reset or something else
  Please help me with this problem

  Program "ASTROMENDA" was the culprit of all this time! I took it and my Firefox just works great! ... * BEWARE OF THIS PROGRAM! * It will change the settings of your browser without you even knowing

  Thank you very much for your help!

• MAX is unable to detect the webcams

  I have three different webcams. Two of them worked in MAX and LabVIEW. When I tried to install the third argument, everything stopped working.

  I think the problem was perhaps a database corrupted - I received the following error message:

  http://digital.NI.com/public.nsf/allkb/7FF79722720AEE488625759B0074A2CA?OpenDocument

  I followed the steps listed on this page, which did not solve the problem.

  I then reinstalled MAX and LabVIEW, and this has not solved the problem either. Or MAX no LabVIEW can 'see' one of the three webcams.

  All three are standard webcams and should be detectable by LabVIEW. I use LabVIEW 8.6 with Vision Acquisition 8.6 and IMAQdx.

  Webcams are all series:

  -HP Webcam (integrated in the laptop, not sure type bus)

  -Logitech Quickcam

  -Microsoft Lifecam

  The three cameras work on this computer - they work very well with their Aboriginal viewers. The first two worked fine before LabVIEW.

  Is there a way I can * force * MAX to recognize these devices?

  Vision acquisition 8.6 does not support DirectShow/USB cameras. Which has been added in 2009. I'm guessing that you have a newer version already installed? I would say go and grabbing the latest version here:

  http://Joule.NI.com/nidu/CDs/view/p/ID/1641/lang/en

  Eric

• communication serial port works to the max, but not in labview

  Hello

  I am trying to connect a regulator to oxygen flow (flow Bronkhorst EL) to a laptop through a USB using MAX and Labview series port adapter. After the MAX aperture, I see my instrument on port COM5 and need to change the baud rate to 9600 to 38400. After this I querry the command: 06030101217D00\r\n, I can turn the mass flow at maximum power regulator (looks a little weird order because of the syntax of the instrument, but it works very well). If I write a vi to do the same and send the same string through visa series, I get no results, it seems that the command is not send to the device. I tried to change all settings for the serial port, nothing seems to work.

  I've attached an example vi here, any suggestions?

  Hello

  just a simple misunderstanding, happy that you added the code.

  In MAX \r\n will be always interpreted as send a cr and line break.

  In LabVIEW only when you select \codes view by right-clicking on the channel.

  In your situation, it now sends a-a r another- and a n