company activate.ru threat

Similar Questions

• No company activate the Simulator

  I can't get the 9000 and 8220 simulators to turn against our BES server. I have activated the simulators in the past, including simulators 8120, 8130 and 8330 earlier today. I tried following the instructions in DB-00049.

  As soon as I simulate the USB connection I see Desktop Manager to make the connection and prompt for a new password (required in politics IT). After you have unlocked the Simulator I normally see the enterprise activation screen indicate the status in a minute or two. I don't see this with 9000 and 8220 simulators. If I go to Options > Security Options > General settings, I can see the COMPUTER policy and Services fields to fill out.

  Any suggestions on getting these two simulators to activate?

  Too bad. All by composing my note the 9000 finally revealed the missing information of activation. I have nothing else. I guess just had to sit connected for a while I was allowing it.

• WebServices API performance test. BB10

  I would like to test the performance of my Application that uses the BB WebServices API for BES10.

  How can I add false devices to perform the test?

  I have not found any BlackBerry tool or third-party applications.

  Thank you

  You cannot add a fake device.  You can create users in the system using the BWS with the API "createUsers.

  You can create administrative users who do not have a device, but order of queries users device information (device with users), they must be registered and then company activate their device against that account which was created (using the email address provided when they were created).

  A number of companies use BWS (BB WebServices) available to their users prior to their receiving device user.  Once they receive their device, the user will add an account using the Enterprise Activation password that was set for them when they were saved/created.

  In the absence of the user to activate their (physical device), you will only have the user objects stored in the database with no realization of activation (No PIN, the device type, model, OS version, etc.).  You can still use BWS for the users from the list, add it policies, add them to groups, etc.

  I hope that clarifies things, even if it is not the result you're looking for.

• I bought the iPhone 6 s without contract. When I tried to activate it, I can't, because "the SIM card is not supported...". ». Support Apple refuses to help me even to say what company locked my new legally purchsed iPhone. What should do? I have

  I bought the new iPhone 6s at the Target store without a contract. When I put my SIM card, iPhone infomed me that it can not be activated.

  The phone is new, legal, covered by warranty accroding Apple its database.

  I called Apple support twice, they said it has been locked by someone, but can't even say the name of the company, which has locked and why.

  Thus, Apple recommended just support me nothing. NOTHING! They even did not provide me the name of the manager who can help me in this situation.

  I called T-Mobile, thay said that they don't lock this device.

  Even the ATT has not answered all my requests.

  Now, I'm dead gold Ibrik. What should do?

  PS. I am totally disappointed by Apple's policy and support. It's terrible that the company with these brilliant products has this terrible attention legal clients.

  Go to the place where you bought this phone and ask for a refund.

• BlackBerry Smartphones Can not put in place a personal e-mail account. I have only option to activate a company account

  Hello.  I've worked for a company and access enterprise server needed to receive e-mails from company on my Curve 9330.  When I need is more capability, I called my provider, Sprint and cancelled my plan Enterprise Server and was able to set up a personal email account.  I need to recharge the phone to the default values and now when I go in the installation program to configure a personal e-mail account I only get the option.  When I select the email icon I automatically join in a sign 'no active account' and wonder of my enterprice account activity by providing an email and a password.  I don't have these and my personal e-mail id and password do not work.  I looked through the forums and follow the suggestion which has not solved the problem.  I also called Sprint and confirmed I have more company on my account/plan, in addition to checking with my local cable/internet provider that they do not cause the issue.  I rebooted the device 3 times today and have not made any progress.  Any help would be appreciated.  Thank you.

  Hello and welcome to the community!

  With a strong carrier network (for example, not only WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... Please wait just before moving on to the next step):

  1) register HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  2) Remove and return Service books

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • If you do not have access CMIME, continue deleting
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  3) restart

  • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.
  • See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If not, then you should contact your mobile provider for official support... but, this time, not only ensure that BES is deleted, but the BIS (BlackBerry Internet Service) is active, this is necessary in order to have personal email accounts on your BB device (as well as many other owners of BB services).

  Good luck!

• Given that I'm off my previous company network, won't activate my company and I was unable to find a way to activate it as a professional version.

  When I left my employer, I got my laptop and a licensed copy valid Windows 7 Enterprise.  Because I'm no longer on their network, won't activate my version of business and I was unable to find a way to activate it as a professional version.  What I really need to reinstall windows and all my applications and data to solve this problem?

  Original title: activation of Windows 7

  Please use /ato slmgr.vbs to activate and update information on KMS clients in order to update the values.

  
  
  a license KMS must connect to its server every 180 days to keep the activation.
  you need to reinstall windows. looks like your computer comes with windows 7. You can reinstall windows edition shown on your COA.

• activate functionalty edition as a company on a standard edition

  Hello

  I would like to know if it is possible to activate a feature of Enterprise edition (materialized views) on a standard.

  I know that you can switch between versions, from standard to the enterprise by an upgrade, but I need just a feature of business.

  Best regards

  Joey

  You are right. It's really a difficult question. The number of rows and columns you read this table is quite important.

  It is difficult to deal with a large amount of data in SE. Views materialized, if it works, you will save time to the hash join and not so much for the analysis of full tables.

  (It might a little, because it may contain fewer columns than the table origin.)

  What are your options?

  • You can compress the data. (Alter table move compress). It can take a lot of time and a lot of them space. Best, try it on a test database. There was also the provision at the time of scanning.
  • You can partition the data. Based on the query above organization and read the State would be criteria for the right partition. What about other queries? Partitioning is not supported on itself. You must code using the old concept of "partitioning view" version 7. Pretty hard to do, as little as possible. Can be code examples in the net.

  More simple is definitely o EE crossing.

• Activate the social sharing for DPS APP company

  Hello

  My client is trying to use social sharing feature (part of the article on someone's facebook wall) in the application of business for some reason any. I tried to build the iOS app to the APP generator business and social sharing feature didn't work at all (the error message: unable to share.) Sorry, this article is not available for sharing).  I think maybe the APP business is for internal use and not able to share any content outside the company. Does anyone have experience the service within the enterprise app? Please notify. Thank you very much.

  Andy

  WebViewer is disabled (in the administration of the accounts) and/or pyrotechnic all have access article protected value.

• BlackBerry Smartphones and how I can create my categories, name of owner of display on the lock, company screen activate & protect activate BlackBerry?

  I am facing following questions from BlackBerry:

  1. I have BlackBerry 9700 gold and I installed the software from the CD and I also entered the information owners and it was displayed during the lock screen but when I upgraded the software BlackBerry my name has not been posted on the screen despite making every effort.  How can I display the name of the owner on the lock screen without a password?

  2. I read blackBerry help/conditions of accreditations to create categories, but I coudnt find filter option in the Application folder in the Menu, how can I creat it?

  3 Enterpirise can be activated gold Internet Wi - Fi connection? or can be activated via my Ufone mobile services?

  4. I installed the BlackBerry Protect software. Is it enabled or not and how to find the location of my computer?

  5. I did my BlackBerry backup in my computer, I can see my data (each contact) in my computer, if yes how?

  Initially, I installed the software CD Desktop in front of my computer and then been upgrated my office and my BB with new verson.

  Current specification of my BlackBerry:

  Model: BlackBerry Bold 9700 smartphone, V5. (as mentioned in the BB Manu)

  Software version: Bundle 5.0 (as mentioned in the BB Desktop on my computer) 1022

  BlackBerry Desktop Software Version 7.0.0.59. Published May 17, 2012 (Bundle 60)

  Communication device:

  Device Manager BB Version 6.0.047

  BBDevMgr Version 4.2.015

  RIM USB Driver version 4.2.0.14

  Application version 7.0.0.31 loader

• Unable to access company LAN via VPN

  Hello

  I have an ASA 5505 that I used to test run them the IPSec VPN connection after having studied the different configs and crossing the ASDM I get the same question that I can not receive any traffic.

  The company LAN is on a 10.8.0.0 255.255.0.0 network, I placed the VPN clients in 192.168.10.0 255.255.255.0 network, 192 clients may not speak on the 10.8 network.

  On the Cisco VPN client, I see a lot of packets sent but no receipt.

  I think it could be to do with NAT, but the examples I've seen I think it should work.

  I have attached the complete running-config, I might well have missed something.

  Thanks a lot for all the help on this...

  FWBKH (config) # show running-config

  : Saved

  :

  ASA Version 8.2 (2)

  !

  hostname FWBKH

  test.local domain name

  activate the encrypted password of XXXXXXXXXXXXXXX

  passwd encrypted XXXXXXXXXXXXXXXX

  names of

  name 9.9.9.9 zscaler-uk-network

  name 10.8.50.0 Interior-network-it

  Interior-nameservers 10.8.112.0

  name 17.7.9.10 fwbkh-output

  name 10.8.127.200 fwbkh - in

  name 192.168.10.0 bkh-vpn-pool

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP fwbkh 255.255.0.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP fwbkh-out 255.255.255.248

  !

  interface Vlan3

  nameif vpn

  security-level 100

  IP 192.168.10.1 255.255.255.0

  !

  interface Ethernet0/0

  !

  interface Ethernet0/1

  switchport access vlan 2

  !

  interface Ethernet0/2

  Shutdown

  !

  interface Ethernet0/3

  Shutdown

  !

  interface Ethernet0/4

  Shutdown

  !

  interface Ethernet0/5

  Shutdown

  !

  interface Ethernet0/6

  Shutdown

  !

  interface Ethernet0/7

  Shutdown

  !

  banner intruder connection will be shot, survivors will be prosecuted!

  Banner motd intruder will be Shot, survivors will be prosecuted!

  banner intruder asdm will be Shot, survivors will be prosecuted!

  boot system Disk0: / asa822 - k8.bin

  passive FTP mode

  DNS server-group DefaultDNS

  test.local domain name

  DM_INLINE_TCP_2 tcp service object-group

  port-object eq www

  EQ object of the https port

  DM_INLINE_UDP_1 udp service object-group

  port-object eq 4500

  port-object eq isakmp

  object-group Protocol DM_INLINE_PROTOCOL_1

  ip protocol object

  icmp protocol object

  object-protocol udp

  inside_access_in list extended access permitted tcp 10.8.0.0 255.255.0.0 any object-group DM_INLINE_TCP_2 journal of inactive warnings

  inside_access_in list allowed extended access computer-network-inside ip 255.255.255.0 any idle state

  inside_access_in list extended access permitted tcp 10.8.0.0 255.255.0.0 host zscaler-uk-network eq www

  inside_access_in list extended access allowed inside-servers ip 255.255.255.0 log warnings

  list of access USER-ACL extended permitted tcp 10.8.0.0 255.255.0.0 any eq www

  list of access USER-ACL extended permitted tcp 10.8.0.0 255.255.0.0 any https eq

  outside_nat0_outbound list allowed extended access bkh-vpn-pool ip 255.255.255.0 10.8.0.0 255.255.0.0

  outside_access_in list extended access permit udp any host fwbkh-out object-group DM_INLINE_UDP_1 errors in the inactive log

  inside_nat0_outbound list extended access allowed object-group DM_INLINE_PROTOCOL_1 10.8.0.0 255.255.0.0 any

  inside_nat0_outbound_1 to access extended list ip 10.8.0.0 allow 255.255.0.0 255.255.255.0 bkh-vpn-pool

  UK-VPN-USERS_splitTunnel of the access list extended ip 10.8.0.0 allow 255.255.0.0 255.255.255.0 bkh-vpn-pool

  UK-VPN-USERS_splitTunnel to the list of allowed extensive access inside-servers 255.255.255.0 bkh-vpn-pool ip 255.255.255.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  MTU 1500 VPN

  mask UK-VPN-POOL 192.168.10.10 - 192.168.10.60 255.255.255.0 IP local pool

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 631.bin

  don't allow no asdm history

  ARP timeout 14400

  NAT-control

  Global (inside) 1 interface

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound_1

  NAT (inside) 1 10.8.0.0 255.255.0.0 dns

  NAT (0 outside_nat0_outbound list of outdoor outdoor access)

  inside_access_in access to the interface inside group

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 17.7.9.10 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  Enable http server

  http 10.8.0.0 255.255.0.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint BKHFW

  registration auto

  name of the object CN = FWBKH

  Configure CRL

  encryption BKHFW ca certificate chain

  certificate fc968750

  308201dd a0030201 30820146 020204fc 96875030 0d06092a 864886f7 0d 010105

  310e300c b 05003033 06035504 03130546 57424, 48 3121301f 06092 has 86 4886f70d

  ccc6f3cb 977029d 5 df42515f d35c0d96 798350bf 7472725c fb8cd64d 514dc9cb

  7f05ffb9 b3336388 d55576cc a3d308e1 88e14c1e 8bcb13e5 c58225ff 67144c 53 f2

  quit smoking

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 10.8.0.0 255.255.0.0 inside

  SSH timeout 30

  SSH version 2

  Console timeout 0

  dhcpd outside auto_config

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  strategy of UK-VPN-USERS group internal

  UK-VPN-USERS group policy attributes

  value of 10.8.112.1 DNS server 10.8.112.2

  Protocol-tunnel-VPN IPSec svc

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value UK-VPN-USERS_splitTunnel

  test.local value by default-field

  the address value UK-VPN-POOL pools

  attributes of Group Policy DfltGrpPolicy

  VPN-tunnel-Protocol webvpn

  username admin encrypted XXXXXXXXXXXXXXXXX privilege 15 password

  karl encrypted XXXXXXXXXXXXXXX privilege 15 password username

  type tunnel-group UK-VPN-USERS remote access

  attributes global-tunnel-group UK-VPN-USERS

  Address UK-VPN-POOL-pool

  Group Policy - by default-UK-VPN-USERS

  tunnel-group USERS of the UK VPN-ipsec-attributes

  pre-shared key *.

  type tunnel-group IT - VPN remote access

  General attributes of IT - VPN Tunnel-group

  Address UK-VPN-POOL-pool

  Group Policy - by default-UK-VPN-USERS

  tunnel-group IT - VPN ipsec-attributes

  pre-shared key *.

  !

  ALLOW-USER-CLASS of the class-map

  corresponds to the USER-ACL access list

  type of class-card inspect all http ALLOW-URL-CLASS match

  match without the regex ZSGATEWAY ALLOW request headers

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  type of policy-card inspect http ALLOW-URL-POLICY

  parameters

  ALLOW-URL-class

  drop connection

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the netbios

  inspect the rsh

  inspect the rtsp

  inspect the skinny

  inspect esmtp

  inspect sqlnet

  inspect sunrpc

  inspect the tftp

  inspect the sip

  inspect xdmcp

  Review the ip options

  Policy-map ALLOW-USER-URL-POLICY

  ALLOW-USER-class

  inspect the http

  !

  global service-policy global_policy

  USER-URL-POLICY-ALLOW service-policy inside interface

  context of prompt hostname

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:00725d3158adc23e6a2664addb24fce1

  : end

  Hi Karl,

  Please, make the following changes:

  local IP VPN_POOL_UK_USERS 192.168.254.1 pool - 192.168.254.254

  access extensive list 10.8.0.0 ip inside_nat0_outbound_1 255.255.0.0 allow 192.168.254.0 255.255.255.0

  !

  no nat (0 outside_nat0_outbound list of outdoor outdoor access)

  !

  UK-VPN-USERS_SPLIT of the allowed access list 10.8.0.0 255.255.0.0

  !

  UK-VPN-USERS group policy attributes

  Split-tunnel-network-list value UK-VPN-USERS_SPLIT

  !

  No UK-VPN-USERS_splitTunnel scope 10.8.0.0 ip access list do not allow 255.255.0.0 255.255.255.0 bkh-vpn-pool

  No list of UK-VPN-USERS_splitTunnel extended access not allowed inside-servers 255.255.255.0 bkh-vpn-pool ip 255.255.255.0

  !

  inside_access_in to access extended list ip 10.8.0.0 allow 255.255.255.0 192.168.254.0 255.255.255.0

  !

  management-access inside

  ******'

  As you can see, I have create a new pool, since you already have an interface in the 192.168.10.0/24 network, which affects VPN clients.

  Once you have finished, connect the client and try:

  Ping 10.8.127.200

  It work?

  Try to ping so another internal IP.

  Let me know how it goes.

  Portu.

  Please note all useful posts

  Post edited by: Javier Portuguez

• Cannot attach files in any email AOL, yahoo or the company. Also only shows blank page when access yahoo email.

  In any web mail program AOL, Yahoo, my companies, you cannot attach files when you compose an email. By the icon/button attach it says "no file selected" (or when you switch on it). This also happens in safe mode. The browser speed is also very slow. Once logged into my yahoo mail, I get a blank page. In the title bar, it says I have x amount of email.

  I reinstalled Firefox and for about 60 seconds, it was fast and yahoo opens up very well and I was able to reach yahoo emails and on behalf of my company. After this he returned to its slow and not be attached and yahoo opening a blank page.

  I have run spybot and deleted and malicious software threats found them all. I think something infects Firefox. IE and Chrome do not have this problem. Any help would be appreciated as I am at a loss.

  antivirus was not a problem since it was not installed. Firewall settings are fine. I just finally solve this problem. SpyHunter was able to detect two of the hijackers that other programs do not have, and this fixes the problem. As I said in the original post I did not suspect that this was the problem. The lesson is to run several malware programs, until you find one that eliminates the problem, if you think that malware as the problem.

• SUPERantispyware blocked by a file of Firefox. Spyware company won't help.

  I had Superantispyware free for many years. The difficulty for the first time. The complete search of the computer stops at C:USERS\IAN\APPDATA\LOCAL\MOZILLA\FIREFOX\PROFILES\7CHPA2BY. DEFAULT\CACHE2\ENTRIES at least 10 attempts ceased at this point and nothing further happens. The quick scan search then several malware threats. I sent e-mail to the company, but got no response. If no help I'll get rid of him.

  See also:

  • https://support.Mozilla.org/KB/Firefox+cache+file+was+infected+with+a+virus

  It is generally preferable to exclude the cache of Firefox.
  The current versions that use the new cache (cache2) also compress files.

• iPhone 5 c does not activate

  I changed the SIM to my iPhone (unlocked) and resetting. However, during the reset process the message: "the SIM card that you have currently installed in this iPhone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert a different SIM card of a grip company charge or request that this iPhone be unlocked by your carrier ' and I can't activate. The SIM card is brand new and should be unlocked works perfectly and the iPhone.

  Why is what appears and how to solve?

  Thank you.

  Your iPhone is locked to a carrier (not unlocked).

  Unblocking can wear this carrier that locks.

• Help to activate iPhone 6

  I was under contract to THE Japan last year. I terminated my contract because I need to go to the United Kingdom for work reasons. I paid my dues before leaving. After 6 months, I talked to my friend in the Japan and asked him if she could ask the company if they unlock my Iphone (I cannot use my iphone as an Ipad). After a day, my friend told me that at THE agreed upon ad unlocked my Iphone. After hearing that, I tried to update my Iphone via Itunes. Back up, first, but not update IOS to 9.2. So, I was sent to restore my Iphone and update. I did and then come to find out my UK sim is not valid. Now I can't use my Iphone. Called to THE and disgusted by saying me that they are not unlock Iphone models 6 and below. Is there a way to activate my Iphone so I can use as an Ipad at least? I was a fool for being a good customer and pay the huge amount of money in my contract for a paper weight.

  N °

• OfficeJet 8600 more: impossible to activate the Scan

  Use OS x 10.10 and printing/scanning using wifi, all of a sudden the scan button went from my printer on my macbook pro. It worked fine until a few days ago. I tried to delete the printer drivers and reinstall. I chose the name of the printer and printing not slected to air. I checked all of the updates and also updated the firmware to the printer. The scan button is missing and the option "enable scan" is crossed out in red. If I connect the printer cable printer a new printer icon becomes available in the primnter options and it can analyze. Any help would be appreciated.

  Hi @PlusBiz ,

  I see that you have problems with scanning via the wireless network, but you can scan through the USB connection.
  I want to help you with this issue today.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Attempt to activate the scan of the computer again.

  Try to print and scan the image.

  If you do not always have the option, do a uninstall complete and reinstall the software.

  Uninstalling the printer software.

  The steps should also work for Yosemite.

  Also, check the following points:

  Some of the files described in the following steps can be found, if you can't find one of the files or folders on your computer, do not be alarmed.

  Move the files or folders to the Recycle Bin, drag and drop.

  • Macintosh HD/Applications / /Hewlett-Packard folder
  • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
  • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
  • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
  • MacintoshHD/Library/Frameworks/HPSmartX.framework
  • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
  • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

  Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

  • In Macintosh HD/library/printers/hp - delete the folder
  • In Macintosh HD/Library/StartupItems, drag the following files in the trash, IO HP and HP trap monitor
  • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * files starting with HP or hp
  • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
  • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

  Close all open windows.
  Turn it back on.
  Empty the trash.

  Reinstall the software of the printer again. HP Officejet Pro 8600 series full feature software and drivers.

  If you're still having problems, it could have been an automatic update on the router and port scan isn't currently open.

  You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  Please let me know the results.

  Have a wonderful day!
  Thank you.