Compaq 15s 104tx: unable to locate the drivers 15s 104tx

Similar Questions

• Installed Windows 7 on my HP Compaq nw8440 but unable to find the drivers that only Vista drivers are ther

  I just install Window 7 Home Basic Edition as final Version was my HP Compaq nw8440 too slow. After installation, I am unable to find the drivers and all drivers available for Windows Vista. No driver VGA, No Finger Print etc. And the Internet is also working slowly well my connection giving the same speed. Please help me

  You are the very welcome.

  I do not take up that simple...

  Try the driver windows 7 for her at the link below and you will need the W7 software protect tools because I do not think the Vista software works.  Ditto for the quick launch buttons.

  These drivers have been extracted from the 6910p who was the first series HP business notebook, support for windows 7 and the one that follows in the line after the nc6400 (the 14.1 "model of your screen).

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-66699-1&prodTypeId=321957&prodSeriesId=1839152

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&taskId=135&swItem=ob-78740-1&mode=3

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-77198-1

  Paul

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Viva Piñata was unable to locate the DVD - ROM drive

  Hello!

  I installed the game Viva Pinata on Windows XP Pro in English when I try turn on the game there is a message like: unable to locate the DVD - ROM drive.

  On the other computer (Windows 7) it works very well!

  What does not help?

  -Instalation of safedisc.exe.

  Help me please!

  Hi MarcinKowal,

  ·         Did you do changes on the computer before the show?

  ·         The installation of the game Viva Piñata was successful?

  You can read the following article and check if the problem still persists.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Let us know if that helps.

• I've recently upgraded to Windows7, now I'm unable to locate the Toolbox of printer (ink cartridge levels).

  I've recently updated to Windows7, now I'm unable to locate the Toolbox of printer (ink cartridge levels)

  original title: the printer toolbar

  Download the right driver Windows 7 from here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3192753

• at the beginning until you get a message-"Unable to locate the DLL:\language\english.dll language" - How can I get rid of this?

  at the beginning until you get a message-"Unable to locate the DLL:\language\english.dll language" - How can I get rid of this?

  at the beginning until you get a message-"Unable to locate the DLL:\language\english.dll language" - How can I get rid of this?

  Have you Spy Sweeper and uninstalled the software. It seems that other software can also use this driver.

  You can delete the entry start and the error using Autoruns.

  To identify what loads when you start using Autoruns (freeware from Microsoft).
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.

  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• I'm unable to locate the WORKSTATION. Where should I look?

  I'm unable to locate the WORKSTATION.  When I had windows 98 that was on my desktop but on my new computer, it is not and I don't know how to locate it.  I'm not computer savvy, so I would appreciate if possible very simple instructions.  Thank you kindly.

  In Vista, 'My Computer' is called 'computer '.  'My computer' no longer exists except as a junction file for backwards compatibility--a folder you will never need access to and shouldn't try again. Click Start (the ORB round to the left of the toolbar at the bottom) and look at the buttons on the right next to the screen.  We'll tell the computer.  Click on that no matter what you are in Windows Explorer at a very high level.  You can also click on your user name to go directly to your user profile, or you can click on Documents to go to your user documents.  You can check all the links on avialble at your leisure.

  If computer (or other default Windows desktop icons are missing, here is an article on how to recover: http://www.howtogeek.com/howto/windows-vista/restore-missing-desktop-icons-in-windows-vista/.)

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to locate the output interface...

  Hello

  I configured a VPN of Lan Lan 2 and it works fine.

  VPN use IKEv2 authentication and certificate.

  

  Computer 1 can reach 2 computer without problem.

  Computer 1, I tried to access the intellectual property inside 2 (ping, AMPS...) but I get this error: unable to locate the output interface

  I do not understand why I can access computer IP 2 but not intellectual property inside 2 people 2 IPs are on the same network and packets go through the same features...

  How can I solve this problem?

  Thanks for your help,

  Patrick

  Hello

  I imagine that the two devices we're talking about are firewalls Cisco? I mean the VPN devices.

  Firewalls Cisco do not allow ICMP behind an interface to another interface on the same device. The only exception is when traffic is coming through VPN and enter a configuration command specific to the device that you're trying to ICMP behind a VPN connection.

  So if 1 computer needs ICMP inside 2 then the firewall with 2 inside interface must be configured with the command

  access to the administration

  Same configuration is required on the other firewall if 2 computer needs ICMP inside 1

  It can also be NAT associated configurations that may require changes, but it depends on the level of your firewall software which we don't know.

  -Jouni

• I'm unable to install the drivers for the Intel CS630 PC camera for windows7 64-bit?

  I'm unable to install the drivers for the Intel CS630 PC camera for windows7 64-bit?

  If it's a camera for INTEL it website should have the good

  64-bit to Win 7 64 bit software.

  Some older hardware will not work on newer 64-bit systems.

  check your websites of manufacturers of games for win7 64 bit compatibility.

  Try your game in compatibility mode in Windows 7.

  to say the least there are a huge amount of games and

  software that works fine with Win7 64-bit.

• When I opened my project and it is unable to locate the files. I find the files that are 'missing' and open the project.

  Hi im quite new for first pro and I'm having a problem when I opened my project and it is unable to locate the files. I find the files that are 'missing' and open the project. Everytime I open the project everything I see is all that media have these red, pink, blue, green, yellow lines, where pictures should be. And there is also the title of my pictures in the upper left corner. No one knows what it is and how I could fix this?

  [title published by mod]

  [Please do not double post, deleted the other]

  Right-click on the images in the project window: recharge or replace it.

• FRm-40741: unable to locate the plug on block 11

  Hi all
  
  I use this custom property defined when press the button Search "FRm-40741: unable to locate the plug on block 11" error getting.
  
  If: XXEAM_SHUTDOWN_DETAILS. WF_STATUS = "Not sent yet!" then
  Set_Custom_Property('XXEAM_SHUTDOWN_DETAILS.) WORK_ORDER_NO',: SYSTEM. TRIGGER_RECORD, "ENABLED", TRUE);
  Set_Custom_Property('XXEAM_SHUTDOWN_DETAILS.) ESTIMATED_START_DATE',: SYSTEM. TRIGGER_RECORD, "ENABLED", TRUE);
  end if;
  
  
  Please give me any other property for record wise work instead of Set_Custom_Property.
  
  Kind regards
  Maha

  Finally, I had a few minutes to play with my sample form and found out that Andreas is correct when he said:

  SET_CUSTOM_PROPERTY does not have the number of the logical record as a parameter, but 'the physical line number' in the layout.

  In my example of form, as I scrolled items folders "Enabled" has not changed with the records.

  *@Maha,* my apologies. In order to apply the desired effect, you will have to imitate the enabled property for each record by using a combination of the Set_Item_Instance_Property() WATERWAY integrated, INSERT_ALLOWED, UPDATE_ALLOWED and VISUAL_ATTRIBUTE (optional) properties. Because you change many properties, I so wrap it in a procedure called ENABLE_ITEM and past the point, the file number and activate settings. For example:

  /* This procedure assumes you have a VISUAL_ATTRIBUTE                 */
  /* created called 'ENABLED' and 'DISABLED'.  In my example,           */
  /* I created the DISABLED visual attribute with following properties: */
  /*  Foreground Color = DarkGray                                       */
  /*  Background Color = gray12                                         */
  /* The ENABLED visual attribute does not specify any properties so it */
  /* sets the above properties back to                     */
  PROCEDURE enable_item (inItem VARCHAR2, inRecord NUMBER, inEnabled BOOLEAN )IS
       paramCount     NUMBER := 0;
  BEGIN
       IF ( inEnabled ) THEN
            Set_Item_Instance_Property(inItem, inRecord, INSERT_ALLOWED, PROPERTY_TRUE);
            Set_Item_Instance_Property(inItem, inRecord, UPDATE_ALLOWED, PROPERTY_TRUE);
            Set_Item_Instance_Property(inItem, inRecord, NAVIGABLE, PROPERTY_TRUE);
            Set_Item_Instance_Property(inItem, inRecord, VISUAL_ATTRIBUTE, 'ENABLED');
       ELSE
             Set_Item_Instance_Property(inItem, inRecord, INSERT_ALLOWED, PROPERTY_FALSE);
            Set_Item_Instance_Property(inItem, inRecord, UPDATE_ALLOWED, PROPERTY_FALSE);
            Set_Item_Instance_Property(inItem, inRecord, NAVIGABLE, PROPERTY_FALSE);
            Set_Item_Instance_Property(inItem, inRecord, VISUAL_ATTRIBUTE, 'DISABLED');
    END IF;
  END enable_item;
  

  You then call the ENABLE_ITEM procedure in your code, passing the name, registration number and activate (true or false) disable your element. For example:

  If :XXEAM_SHUTDOWN_DETAILS.WF_STATUS = 'Not Submited Yet!' then
     enable_item('XXEAM_SHUTDOWN_DETAILS.WORK_ORDER_NO', :SYSTEM.TRIGGER_RECORD, TRUE);
     enable_item('XXEAM_SHUTDOWN_DETAILS.ESTIMATED_START_DATE',:SYSTEM.TRIGGER_RECORD, TRUE);
  end if;
  

  Options François and Steve mentioned are also good ways to do this as well.

  Sorry if I confused the issue earlier.

  For those who suggested to use SET_ITEM_PROPERTY('BLOCK_NAME.) Nom_element', ACTIVE, PROPERTY_FALSE), do not forget the cascade effect of assigning false to the ENABLED property of an element. When you ACTIVATE your story later, you must also set the properties MODIFIABLES NAVIGABLE, UPDATE_NULL, true.

  Craig...

  Published by: Silvere on 16 January 2013 14:15

• Message "Unable to locate the hard drive" after using XP Pro recovery disk

  I used my reinstall windows Home drive to recover a file system corrupted on a windows operating system pro. I hit the 'R' to repair key when he asked but now when I rebooted... I get a message "unable to locate the hard drive. Does anyone have an idea what went wrong? And I order a Windows OEM Pro installation disc and just do a clean install?

  
  

• "Unable to locate the application resource.

  It's what keeps popping up on my screen. "" Unable to locate application resources. I have no idea. What should I do?

  I tried scanning and reboot. Nothing. I upgraded my Nvidia and the problem disappeared. Thank you.

• Alert message "unable to locate the file to wait for mail.

  I use Ubuntu 14.04 OS. Mozilla Thunderbird is used for the e-mail client. Everytime I open Thunderbird, I get a warning message reading 'could not locate the file spooling Mail. " What is the cure?

  Your accounts must be set up as POP or IMAP, not coil is my guess.

  Most Linux distributions include a component of mail server Thunderbird guess works. Unfortunately, the reality is very few of them are really configures. Then, go to your account settings and remove account

• HP Support Assistant is unable to install the drivers wireless wireless device not recognized at startup

  Name and product number:

  HP Envy Sleekbook4 PC / / C2K72UA #ABA

  Intel Centrinto Wireless-N 2230

  Microsoft Kernel Debug network adapter

  Realtek PCIe GBE Family Controller

  USB - IF xHCI USB Host controller (Intel WiUSB)

  Inter 7 series / C216 Chipset Family USB Enhanced Host Controller - 1E26 (there is a similar device that works but ends with 1E2D)

  System Operalting:

  Latest Windows 8

  No error message.

  Changes:

  Uninstalled some things via the control panel (I don't know where I can find a newspaper which has been uninstalled)

  Attempt to system restore and it failed.

  My diagnosis:

  First of all, some info on why the devices do not work.

  The USB controller claims there are insufficient system resources to complete the API. However, I am only using about 20% of my memory and my hard drive. If I deactivate and reactivate the device through Device Manager it starts working until the computer passes in mode 'sleep' or reboots.

  The Realtek PCIe controller and Intel Centrino Wireless adapter simply read {operation failed}. If I disable and re-enable these devices via Device Manager they begin to work until the computer mode "sleep" or reboots.

  The Microsoft Kernel Debug network adapter "is not present, is not working properly or is not all its drivers installed."

  Intel WiUSB - windows cannot load the drivers for this device (code 31).

  The HP support assistant tries to download and install "Wireless for windows drivers 8. The download succeeds, but the installation fails.

  At startup, windows thinks that there are no network adapters (other than bluetooth). After the reboot of the devices from the Device Manager, they appear in the section of the network adapters.

  Thank you in advance for reading this and any help you may be able to offer,

  Tim

  I see. Unfortunately, the failure of the short DST means that the hard drive needs to be replaced. The computer is still under warranty?

  If so, you can contact HP Technical Support and ask them to send you a replacement. This replacement will come with recovery media. If you don't have an external CD drive, make sure you request a recovery rather than recovery disks USB. They should know that the model already, but, I would make sure. Once you have received the new hard disk, you will need to send the back of an old man in this same area, using the provided shipping label. The technician on the phone will give you the details on that.

  HP 1-800-474-6836 Technical Support

  If the computer is out of warranty, you can replace it with any HDD notebook 2.5 ". If you need help choosing a car, let me know