Compaq 6910 [: disconnection of the sound device plays continuously.]

Similar Questions

• How to adjust the sound to play continuously when you listen to the Radio station

  When I play a radio station on computer it keeps cutting off after that about 15 minutes and then I have to move the mouse to start the music

  When I play a radio station on computer it keeps cutting off after that about 15 minutes and then I have to move the mouse to start the music.  How to adjust the sound so that it can play continuousley?  Thank you

  Check the control panel | Power options and try to disable the screen saver and see if that fixes the problem.  If not, try to address some of the other power options to keep things to turn off automatically if the computer is not in use (if it's just to play music with no user interactivity, and which is considered to be not used by power options).

  Steve

• Crackle M4800 Audio when the sound is played (if no sound has been played for a while)

  I have a new DELL Precision M4800 running Windows 7.

  There is a distinct noise pop crackle that occurs when the sound is played (if no sound has been played for a while.)

  If the laptop is audio playback currently it looks good, but if the laptop is quiet for a while and then something like an e-mail notification is available, crack/pop noise happens as the driver/speaker is trying to wake up.

  The problem occurs with the laptop connected and detached.

  -Edit

  The solution for me was provided by pknb below.

  Reference Dell Open Audio in the control panel. Go to advanced, energy management. Disable the option to disable audio devices.

  I do not have the Audio from Dell driver installed - and it seems that maybe the default setting is that the speakers put in 'sleep' in the context of a power saving mode. Looking at my description above I even referenced at the time of the issue seemed to be that the speaker was not long in 'waking '. In any case after you change this setting the problem now seems to be resolved.

  Reference Dell Open Audio in the control panel. Go to advanced, energy management. Disable the option to disable audio devices.

• loading the page, the sound is played; prefer the page loads, sound not playing

  Insert > media > plug-in

  I select a soundfile, OK.

  When I publish the page, it puts even a play/stop controller.

  BUT the sound is played during the loading of the page, rather than wait

  for someone to hit 'play '.  I don't want to sound up to a certain

  hits "play." (I don't want a new page to open, just play

  in the web page, the page also wants to use quick time player.

  Is this necessary?  Is there a better way?

  Thanks, everybody!

  PS CS3

  Lol just you a single controller with two audio files.  If the browser/device does not recognize the first type of file, it is automatically the following file type.

  Nancy O.

• I accidentally turned off the sound to play videos online. How can I solve this problem

  I accidentally turned off the sound to play videos online. How can I fix it.iHAVE YEAR ASUS WITH WINDOWS VISTA

  Hello

  IE - Tools - Multimedia Internet Options - Advanced tab - check sounds in Web pages
  APPLY / OK - close and restart IE.

  If it has been verified - uncheck the box - APPLY / OK - close and restart IE - then go back and re-check.
  APPLY / OK - close and restart IE.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot get the sound to play when the pre-recorded videos on Webex access

  Original title: audio playback

  I have a HP Pavilion pc with windows 7. I can't get the sound to play when the pre-recorded videos on Webex access.  I checked all the settings and the sound works well when listening to music or playing games. There is a sound icon above the keyboard that looks like it is not if this could be the problem? If yes how to do it turn on?

  Hi Robin,

  1. it worked before?

  2. are you aware of changes to the computer before the show?

  3. you use WebEx with product Cisco meeting place or alone?

  4. how to access pre-recorded videos on WebEx?

  Because the sound works properly with another application, it seems that you may need to change some settings in WebEx. You can contact WebEx support for assistance:

  https://support.WebEx.com/MyAccountWeb/supporthome.do

  Hope this information helps.

• by turning on the computer the sound wav plays always the value by default even if I changed my diet and renamed it

  When you turn on the computer default wav sound still plays even if I changed the system and renamed it

  Hello

  1. which version of the windows operating system is installed in the computer?

  2. have you made any changes to the computer?

  Method 1:

  If you use windows vista and windows 7, I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Change the sounds of the computer

  http://Windows.Microsoft.com/en-us/Windows7/change-computer-sounds

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-computer-sounds

• audio, the sound stops playing

  I have windows XP and separate speakers.  I turned off my stage monitors.  Until a few days ago, the sound was very good, now 'wave' on the volume button control turns off every 30 seconds approximately.  I tried to 'fix' to try downloads updated for soundMax.

  Hi TAZ6449,

  Thanks for posting in the Microsoft Community.

  I'm sorry to know that you are facing a problem to read the audio data.

  It would be useful that you could answer this question to help you further.

  Have you done a recent software or hardware changes to the system?

  Let us try the following steps and check if it helps.

  Method 1:

  Run the fix of the article and check for the issue:

  Diagnose and automatically fix the audio problems and audio playback

  Method 2:

  You can try to uninstall reinstall the sound card drivers and check if that helps.

  a. click on Start menu, type devmgmt.msc in run and click ok to open Device Manager.
  b. expand sound, video and game controller.
  c. right click on the device and select Uninstall.
  d. restart the computer and install the updated drivers from the computer manufacturer website and check if that helps.

  For more information, see the article:

  How to manage devices in Windows XP

  If you need further assistance, please answer and we will be happy to help you.

• A sound is set on a layer, I wanted to REMAIN on THE FRAME when THE SOUND IS PLAYED, after the sound-&gt; risk of moving. How?

  A sound is attached on a layer, I wanted to STAY on THE FRAME when THE SOUND IS STILL playing, after that the noise can-> move.

  How to make a small SCRIPT of ACTION?

  

  Sure mate:

  Copy this http://contek.com.do/ExampleAdobeSoundChannel.zip links and paste it into your browser, unzip the zip file and you can play the swf file to see the desired effect, the included FLA Source file, frame 15 actionscripts.

  Also note the library to see the class that I applied to the sound.

  Kind regards

  Giancarlo Alfau

• Need the sound to play on imported into the second swf with loadMovie swf

  I have a movie of parent with a couple of movieclips placeholder in this regard. I use the loadMovie to load 2 separate swf on the spaces reserved for execution:
  
  a swf contains the sound, which I initialize it using the following:
  
  sounds = new Object();
  sounds.reelSpin1L = new Sound();
  sounds.reelSpin1L.attachSound ("reelSpin1L.wav");
  
  now, I also wrote a function inside this same swf, which I want to call from a second swf file, which reads:
  function playReelSpin() {}
  sounds.reelSpin1L.start (0, 99);
  trace ("play music ReelSpin!");
  }
  trace ("the sound played");
  
  
  Now when I call the function from the other swf when running, I see the trace on the output window message, but I don't hear the sound!
  
  The weird part is, when I run the first swf that I've initialized the sound and call the function, it works very well.
  
  In conclusion, so I need to know why the sound won't play on a swf that was loaded into another swf when running.
  
  I appreciate any help you can provide.
  
  -Pat Ferguson
  

  Wow! It worked! I can't believe it's that simple! I was going out of my mind for 2 days trying to figure this out too! Thank you! Thank you! Thank you!

  -Pat Ferguson

• the volume control of the sound both play at the same time

  Hello...

  I want to separately control the volume of sounds

  I used a VI of its volume, but it reduces the volume of these two sounds,

  even if the ID of the task of both played sounds are provided separately.

  Please help me for the same...

  Thank you.

  If I'm not wrong, its volume will set the system volume. So, it does not depend on "audio files". I think so...

• How can I add a .wav to a page so the sound is played when the page loads?

  Can someone tell me how to add sound to a page? I have a .wav file, I would like to use and play during the loading of the page.

  Thank you!

  You can integrate it as a media object. Quick web search has this:

  Integrate Audio and video in HTML 5 Pages - Webmonkey

  It is not the most brilliant ideas, however. This stuff tends to be massively annoying and put off users rather than attract them. as a minor, convert the file at least in a file compressed in MP3 or OGG to reduce the use of bandwidth and of the size of the files.

  Mylenium

• How to create a shortcut to toggle the sound device?

  Anyone have any suggestions on how to create a shortcut to toggle the USB audio device in Device Manager?

  A shortcut is to enable this device, and the other shortcut is disable this device.

  Thanks for all the suggestions

  Hi oem7110,

  · Why you want to create a shortcut to enable or disable an audio device from Device Manager?

  You will be able to create the shortcut to Device Manager but no shortcut to enable/disable a device in Device Manager:

  a. right-click on the space empty where you want to create a shortcut

  b. click the shortcut

  c. in the type of space empty in devmgmt.msc

  d. click Next and follow the instructions in the wizard.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• remove the link to the replay and play continuously in pictures

  Hello

  I am a newbie in flash, so maybe it's a trivial problem for experts. I have a flash banner I want to remove the link of proofreading and display flash continuously.

  Link Overview: http://kaazunut.com/queries/header_v8.swf

  CBC link: http://kaazunut.com/queries/header.fla

  Any help would be appreciated.  Thanks in advance.

  Kind regards

  Loïc

  do all the notvisible of layers (by clicking on the image of 'eye' in the time line) except layer11.

  On the layer, there is a movieclip sshow. Double click on it.

  inside this movie, delete the layer 18 anf on the 580 layer 2 frame, there is an actionscript stop(); Also remove the thid

• Error Windows Media Player cannot play the file because "it might not be a sound device installed on your computer.

  Original title: Media Player

  THE FOLLOWING IS a MESSAGE I GET WHEN TRYING TO DOWNLOAD FILES: "Windows Media Player cannot play this file because there is a problem with the audio device.  "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.  What "audio device" are talking about?

  Hello

  1. do you get an error with this error code?

  2 have you installed multiple audio devices on your computer?

  3. what version of Media Player do you use?

  4. were you able to play the files using Media Player without any problem before?

  5 did you a recent software or changes to the material on the computer?

  Audio device is the part that allows sound from the computer. If the appliance is used or if the drivers are corrupt, then you can get the error message.

  I suggest you go through the steps and check.

  Method 1:

  Quit other programs that may be using your sound device, and then try to play the file again.

  Method 2: Install an updated driver.

  Step 1: Firstly uninstall the audio driver from Device Manager and add or remove programs

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  a. click Startand then click Control Panel.

  b. click Systemand click on the hardware tab, then click Device Manager.

  c. to the title sound, video and games controller, check the sound card that is listed.

  d. right click on the sound card and then click on uninstall the driver.

  Step 2: To see if an updated driver is available, use Windows Update or access the sound device manufacturer's Web site.

  Follow these steps to do the same thing:

  a. click Startand then click Control Panel.

  b. click Systemand click on the hardware tab, then click Device Manager.

  c. the title sound, the video controller and games, make sure that the sound card is listed.

  d. right click on the sound card and then click Update driver to install the latest version of the driver.

  e. visit the sound card manufacturer's Web site to determine if a newer version of the driver is available for download.

  Method 3:

  If you have multiple audio devices installed on your computer, try to use another. The selected audio device might not support Secure Audio Path (SAP).

  Additional reference on:

  Resolution of the problems of reading in the Windows Media Player for Windows XP

  http://support.Microsoft.com/kb/306317/

  Hope this helps and keep us informed if you need help.