Compaq 6910p driver problem

Similar Questions

• Compaq 6910p: driver needed - Compaq 6910

  Hi all

  I recently wiped and installed Windows 7 on a Compaq laptop 6910p I got when sort my desk at work.

  I've been trying to get it up and running for what to do, but I was unable to find the drivers I need.

  Those I need is the following:

  Base system device

  Hardware - PCI VEN_1180 & DEV_0843 & SUBSYS_30C1103C & REV_10 ID

  PCI VEN_1180 & DEV_0843 & SUBSYS_30C1103C

  PCI VEN_1180 & DEV_0843 & CC_088000

  PCI VEN_1180 & DEV_0843 & CC_0880

  Fingerprint sensor

  Hardware - USB\VID_08FF & PID_2580 & REV_0623 ID

  USB\VID_08FF & PID_2580

  RICOH Bay8Controller

  Hardware ID - PCMCIA\RICOH-Bay8Controller-F1B2

  PCMCIA\RICOH-Bay8Controller-0000-0000

  PCMCIA\RICOH-0000-0000

  Unknown device

  Hardware ID - ACPI\SMCF010

  * SMCF010

  Unknown device

  Hardware ID - ACPI\HPQ0006

  * HPQ0006

  If anyone can help me with links to drivers for the latter, or suggestions as to where I can find them, I would appreciate it!

  Hello:

  You need these drivers...

  System of base & RICOH Bay8Controller device:

  This package contains the Ricoh Media Card Reader Driver for laptop models supported and operating systems. The Ricoh Media Card Reader driver supports the following media: Memory Stick, xD-Picture Card, MMC, SD and smart card.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45112.exe

  Fingerprint sensor:

  This package contains the driver for the AuthenTec fingerprint sensor in the notebook models and operating systems. NOTE: To use a fingerprint to connect to a Microsoft Windows or Microsoft Windows Vista Notepad, the HP ProtectTools Security Suite software is necessary.

  FTP://ftp.HP.com/pub/SoftPaq/sp39001-39500/sp39199.exe

  ACPI\SMCF010: You must get this driver from windows update.  Be connected to the internet.  Go to Device Manager and click on the ACPI\SMCF010 who need the driver.  Click the driver tab.  Click on set to update driver.  Select Auto search and Windows Update will be find, download and install the SMSC fast infrared driver.  This may take a few minutes, so be patient.

  ACPI\HPQ0006:

  This package contains the software that allows the HP Quick Launch Buttons, which are special function keys on HP laptops. This software works with the notebook models that are running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp49001-49500/sp49104.exe

• HP Compaq 8510w - wifi problem

  Hello

  I have a laptop HP Compaq 8510w running on W8.1.

  On the support site, I can't download drivers for W8.1, but the laptop is too good and too quick to replace.

  However, I constantly loose connection wifi. Device Manager contains the following description of the device:

  Intel (R) Wireless WiFi Link 4965AGN

  • This could be a driver problem or is this a hardware problem?
  • If it is a hardware problem, you can easily replace the wifi component?

  Thanks in advance,

  SJW

  P.S. when I leave W8.1 get a new driver in Device Manager, it says that the driver is up-to-date.

  Hello:

  You can try the drivers on the link below to W8.1 and see if that helps...

  http://www.Intel.com/support/wireless/wtech/PROSet-WS/sb/CS-034041.htm

  You have the best wireless HP offered at the time, so replacement will not be a map option.

  BIOS locked maps wireless not supported.

• HP Compaq 6910p: empty Slot memory HP Compaq 6910p in

  Hello

  I'm working on a laptop HP Compaq 6910p for a friend. I removed the cover of the memory to make a larger version of the XP license copy # and I was surprised to find there is no memory in the memory slot. I went into the BIOS, and it shows that there is 1024 MB of memory in the computer. This computer has a built-in memory? The specifications also show, it should have 2 memory slots, but I only see 1. Has anyone experience this problem with this computer?

  Thank you!

  Warren

  The 6910p model has 2 memory cards.

  (1) memory expansion card

  (2) primary memory card

  Please use the link below to see her remove and replace unit 6910p videos:

  www.HP.com/go/SML

  

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  Although I am an employee of HP, I speak for myself and not for HP

• Failed to get on the Web. Driver problem?

  I started having trouble with my Compaq Presario, out on the web.  I started working with a direct technology company,
  who is on your remote computer.  had some experience with them, which was really good.
  After a few days now (about 7 hours in total) they think I have some sort of driver problem and he said I need to get
  a Service Pack 3 for Windows XP Pro disc (which I have on my computer) since I can't get out, I talk to them with the laptop of my son,
  Windows 7 Home premium with SP 1.
  I can't find such a drive to buy.  Can I download a file SP3 from Microsoft, to my son's computer, burn it to a disk to use with my computer?

  Martin H,

  We can update the SP 3 for your system,
  Here the link to download:
  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3
  Kind regards
  Chauvet J.

• HP Compaq 6910p wireles drivers

  Could hello you tell me what driver I need for win vista 32 bit for HP Compaq 6910p. I tried some oand they does not work

  Thank you, I found it already. It is SP46148, but takes the time to test all drivers.

• Microsoft teredo tunneling adapter has a driver problem

  Original title - trobleshooting driver

  Microsoft teredo tunneling adapter has a driver problem. I got this message when I have my PC troubleshooting

  my PC is HP Compaq 615 Windows 7. How can I solve this problem?

  Uninstall the adapter Teredo, ISATAP, IPV6 nor Microsoft 6 to 4 cards and by going to control panel > system > Device Manager > view > show hidden devices, and then expand the network adapters entry and do a right click either disable or uninstall one of the adapters I mentioned, and then restart your computer.

  You need not Teredo adapter to connect to a domain or a shared drive, and the special features of Microsoft claims to offer with the Teredo adapter do not work in Windows 7 in any case.

• Dedicated graphics (A1398) driver problem

  My Macbook Pro (A1398) dedicated card (Geforce GT650M) graphics driver problem.

  Installation of the drivers of web from Nvidia (WebDriver - 346.03.10f02.dmg, WebDriver - 346.03.10f01.dmg, WebDriver - 346.03.10 b 01 .dmg) with CUDA drivers (cudadriver - 7.5.29 - macos.dmg) and toolboxes CUDA (cuda_8.0.29_mac.dmg and cuda_7.5.27_mac.dmg) does NOT.

  When I tried to install Caffè/CUDA (used for Machine learning), my card (Geforce GT650M) dedicated graphics card driver has become corrupt (seen through the Console).

  Dedicated card random is more gets reported under 'report system' (probably due to the problem of driver).

  Attempts to restore have been hit and Miss so far.

  I downloaded the drivers from Nvidia web (WebDriver - 346.03.10f02.dmg, WebDriver - 346.03.10f01.dmg, WebDriver - 346.03.10 b 01 .dmg) but they have only worked / failed randomly when combined with CUDA drivers (cudadriver - 7.5.29 - macos.dmg) and toolboxes CUDA (cuda_8.0.29_mac.dmg and cuda_7.5.27_mac.dmg).

  Only the internal graphics card Intel Graphics 4000 is constantly working.

  I cleaned the system (by removing all traces of the nvidia drivers and drivers of coda) while that to reinstall these drivers in different combinations.

  Yet, the conclusion is that it is all the success and the miss.

  Sometimes it worked I could test samples CUDA.

  Other times, that it worked, but the laptop would freeze randomly.

  Then, he failed once again and returned to map internal Intel completely.

  It was suggested that I should be able to restore it by reinstalling ElCapitan

  I don't have the luxury of reinstall ElCapitan.

  Is there a way to access the Apple drivers without having to reinstall OS x.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  This could be your problem:

  http://www.Apple.com/support/MacBookPro-videoissues/

  Need to reinstall OSX to reinstall the Apple drivers.

• Driver problem

  I think I have a driver problem. Installed the 9.3.1 version recently.  Always get an error message and cannot connect to Safari.

  What is the exact error message?  You can try another web browser: chrome, firefox, etc.

  E-mail work?

  R

• -Portege Z10t 13 V graphic driver problems and lag with W10

  Hello

  Please excuse my bad English,

  I just bought the Z10t A 13V PT 141, with W8.1. This computer works fine on W8, but I want to install W10. I already tried 3 times but each time, the cursor (with the touch pad or mouse) is lagging behind, each movement is jerky and works very well. I tried to see if it was a driver problem and downloaded new drivers from Toshiba for the W10.

  I did the same thing with Intel drivers, but for graphics drivers, there is an error message: "a custom computer manufacturer driver is installed on your computer. The Intel driver update utiliy is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. Contact your computer manufacturer for the latest driver for your computer.

  When I'm with W8, drivers are correctly updated...

  So I think that the cursor problem is due to this driver problem (I hope so, but I'm not sure). What is the solution? I'M alone with this problem?

  Thank you

  Thomas

  Hello Thomas,.

  EXACTLY the same problem here with my uograded Portege Z10t-A-140 to WIN 10.
  I also took the same steps and encountered the same problems and no solution.
  I find Toshiba after sale customer VERY INEFFECTIVE and disappointing, because it seems no way to get a support PROFESSIONAL from Toshiba on this issue (or any other for that matter).
  Note that I absolutely do not consider helping other users on a forum or self-help a form of professional support at all!
  -> Not happy with Toshiba!

• Sound driver problems

  Hello world

  I reinstalled windows in my computer after you have removed all the files it contains.

  Therefore, I unfortunately lost the recovery partition.

  Now, after you have reinstalled the Windows 8 Pro, I installed all the drivers and everything works normally except the sound.

  However, I have been using Ubuntu after reinstaled Windows and I DIND'T have no problem with that.

  I thought that maybe this could be a problem inside, but when I use me headphones, or when I use my computer with my TV with HDMI, the problem persists.

  My computer is a HP ENVY m6-k010dx Sleekbook.

  So, what shoul I do to have it fixed?

  (Sorry for my bad English )

  ---------------- UPDATE ----------------

  I use a Linux Live USB to test the sound, as it could be any physical problem.

  However, it turned out that it really is a driver problem.

  I found a solution

  Just after installing Windows 8.1 the problem fixed itself

  Thanks for your help ():

• My cd rom seems to have a driver problem

  Hello

  My cd rom seems to have been corrupted and I have a message from code 39. How can I use my recovery disks when the cd rom is not working. I have an old computer that has XP loaded, I can load my inside recovery disks & copy on an external hard drive and then copy it on my laptop which is a HP Pavilion dv - 7 3111ea.

  Thank you

  Hello

  Unfortunately, it is not possible to do what you suggest.

  However, the CD/DVD drive should still work with your recovery disks (unless there is a hardware problem with the drive), because when you start the laptop computer, the drive is controlled by the Bios, no windows - code 39 refers to a driver problem Windows.

  You may be able to correct the error of the Windows driver as follows.

  First, try the automated Microsoft fixit at the link below.

  Windows 7

  Vista

  Check if the drive works now.

  If the drive does not, in the Menu start, open all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.  Reboot the laptop.

  When windows is completely reloaded, click on the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

  

  Kind regards

  DP - K

• Driver problem with a dc7100 cmt

  I have a driver with my Hp dc7100 cmt tour 7 months ago, I upgraded Windows Xp pro to Windows 7 Edition System Home Premium, it was working fine... or so I thought, then week or so I did a Windows update that has problems starting

  Windows 7 upgrade advisor has been downloaded in my system, I started to have a driver problem he always tells me to update my drivers for systems, I well updated some drivers but I was not of the most important of them.  It is a Graphics driver (WDDW) driver for windows aero graphics would work my CD-Room go stale and USP port pilot who was also outdated... The player windows Media have also stopped...  He told me to contact my PC manufacturer or retailer to see it an upgrade is available, I've been looking and asking for two days... I hope someone reading this and can give me some advice on how I can get these updates, or tell me why I can't get HP... My goal is not to get out a purchase of a new system, but fix the one I have... as a student, my funds are very low!  Pease Help, thank you

  Hello:

  What graphics card you have in your PC?

  You mentioned Aero, and you wouldn't get Aero on a dc7100 with the integrated Intel graphics card.

  You'd only Aero, if you have a PCIe x 16 graphics card is windows 7 capable.

  If you have the Intel integrated video card, I got something that will install the video driver, but you won't have Aero.

  In addition, he will work for W7 32 bit.

  So, please post back and let me know what video card you have in the PC, because if it's an add-on, one, I would need to know the manufacturer and model.

  Paul

• Tecra 8000 SD 2102 DVD Drive problem

  Hello

  I have a Tecra 8000 with a 2102 sd drive, the drive may be used if I boot from a boot disk, but has driver problems when used in Win 2 k. Anyone has any ideas, what is the problem?

  Dave N

  Hello

  a http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home, you can find more information on your drive!

  Choose your player and download the device driver. This should solve your problem!

  Good bye

• HP compaq 6910p: drivers needed ASAP!

  ACPI\SMCF010 ACPI\HPQ0004 ACPI\HPQ0006 are the 3 unknown drivers on my HP Compaq 6910p that shows on my device manager! Please help me to get them as soon as possible!

  ACPI\SMCF010 & ACPI\HPQ0004: HP 3D DriveGuard

  http://WHP-aus2.Cold.extweb.HP.com/pub/SoftPaq/sp45001-45500/sp45248.exe

  ACPI\HPQ0006: HP Quick Launch buttons

  http://WHP-aus2.Cold.extweb.HP.com/pub/SoftPaq/sp49001-49500/sp49104.exe